Liczymy pasujące modele…
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thanks to feedback from a user of my very popular miniature vice with table clamp, I realized that access to the the hand knob on the vice was a bit hindered by a part of the table clamp. If you don't have the vice yet, get it here:…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model has the same dimensions as the one from Foppemoa , but you can use with this design the original filter. My air conditioner is an Electrolux Chill Flex Gold (EXP26U758CW). The cover fits probably many more models of Electrolux…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
Wydruk około 15,42 €–18,85 € nettoWstępna wycena jednego wariantu
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Wydruk około 7,55 €–9,23 € nettoWstępna wycena jednego wariantu
Original Prusa i3 MK2 to MK2S Upgrade. This is a legacy download.
Wydruk około 4,78 €–5,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original Prusa MK2S to MK3 Upgrade printable parts. Note, this is a legacy download. The neccessary hardware for the upgrade is not sold anymore as a bundle. This is the upgrade to MK3, not the later MK3S nor MK3S+.
Wydruk około 12,72 €–15,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there, I created a Paracord Jig Upgraded to everyone, who needs a jig for making paracord bracelets, etc. :-) I printed a great model of "old" Paracord Jig by FrankBer from Thingiverse and I using it for one year. I had two small…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You want the new MK4 look on your MK3S+? No problem I got you covered! Download my new extruder mount and upgrade! With the new z-axis design the extruder sits closer to the x-axis rods and enables to use the new 10mm z-rods . I created…
Wydruk około 3,66 €–4,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgrade the platform on your CW1 to the CW1S version. The platform will become easily removable with the option of attaching the protective FEP foil. Both the Platform star and the Ring separately fit both the MK3S+ and MINI+ bed sizes.…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After completing the Mini Base Upgrade, I noticed the left side of my X-axis was lower than the right. This print is an attempt to both explain and correct that misalignment. While the Mini has the anti-vibration pads placed directly…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print your upgrade parts on mk4. I found that running mk3 gcodes on mk4 works, but leaves sub-optimal results due to speed and stringing. Ready to print gcodes for mk4 Latest parts at 28/4/24 Settings: 3 perimeters 15% grid infill…
Wydruk około 3,89 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Wydruk około 17,71 €–21,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows the use of Lechuza Cube 14 pots with Lechuza Pon or other substrate. Rather than having to use the pots the plants are bought in (which are usually already far too small to begin with), it allows the usual Lechuza method of…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed a new motor cover for the Backfire Zealot since my motors were wearing though my ESC cables and about to short circuit. This new cover replaces the motor cover which is used when running 105mm Cloud Wheels. The original motor…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Official Prusa Enclosure comes with a lot of air leak points, @BuildX has an amazing solution to this problem. He offers solutions to fix just about every air leak point. However, I was unable to find a good solution to gap between…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
The idea was shamelessly stolen from https://www.printables.com/model/240252-ultimate-printer-knob-upgrade-the-best-knob-of-bot but written from the ground up in SCAD, and only has been tested for the MK4. Prints with no supports. I used…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
This wall mounted remote holder makes is easier to grab the remote, and keeps fingers away from the wall to avoid finger marking the wall. Printer: Ender 3 Pro Filament: PLA+ Temp: 225C Speed 150% Orientation: Vertical Support: None Print…
Wydruk około 1,80 €–2,19 € nettoWstępna wycena jednego wariantu
Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DISCLAMER | This is an unofficial, amateur-made, not thoroughly tested modification that could definitively break your Chuwi Larkbox Pro. Please proceed at your on risk. I am no electronic or industrial engineer, I'm just tinkering. :¬) I…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Modified the Bear Upgrade 2.1 optional reverse bowden to fit the original M5 fitting (PC4-M5) used by Prusa for the MMU2 cover. The vslot mount is available in two versions: angled or normal. I bought the fittings here:…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My take on the best current feet upgrade for CoreOne. I knew I wanted something low profile and versatile enough to work with the existing anti-vibration pads but not require the adhesive to hold them in place. After a few attempts I…
Wydruk około 4,37 €–5,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of having to change the puny coin cell battery so much? Well go big or go home! With this case and a tiny bit of soldering you can now wait much, much longer to swap batteries! Takes just over an hour to print. No supports. I just…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is created with modifiers in PrusaSlicer and fits 8 mm holes. Print it using vase mode and 2 bottom layers. Friction fit placement, no glue needed. All my models are free to download and remix. If you appreciate them, please…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
These files will provide you the ability to print your own replacement parts and also add upgrades to TT/FFC too. These files work well with PETG. The complete Cabinet is available at…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Additional parts: Threaded inserts (M3x4mm) and 20mm spacer between Orbiter Extruder / Toolboard mount required. CAN-FD on Duet3D boards rulez ;) Printable in ABS. Use at your own risk. Please give me some feedback and post your make as a…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
I always liked the idea of the iOS settings icon on top of a stepper, but didn't wanted to cover my extruder stepper, because of the cooling of the motor bottom. Then I found the solution from Félix but it doesn't fit on the bear motor…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Korba se zapuštěnými šrouby na upgrade rám
Wydruk około 7,10 €–8,68 € nettoWstępna wycena jednego wariantu
MEZIKUS MEZI MOTOR A 2SPEED PŘEVODOVKU, JEDNÁ SE O REDUKCI ABY BYLO MOŽNÉ NAPASOVAT VĚTŠÍ MOTOR. PŘEVODOVKA MUSÍ BÝT OTOČENÁ MOTOREM DOZADU JINAK PŘEKÁŽÍ KABINA. VŠE PASUJE ALE JE TŘEBA SI S TÍM TROŠKU POHRÁT
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000425 : Planetary gear, 23 teeth, 0,85 modulus
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this drive shaft optimization. It is a hexagonal shape with an increased section. I had issues with TPU shaft. Indeed, the coupling was grinded in early 15 minutes of uses. I decided to change the print orientation. It works…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Sky Team upgrade package including box insets (upgrade bed adhesion) and upgraded switches. Based on: https://www.printables.com/model/805423-sky-team-insert-removable-tray https://www.thingiverse.com/thing:6268933
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This mod is a remix of the original MGN9C linear guide and carriage for the MGN9H linear carriage. There is an adjustment for better stability of the X-axis and the ability to adjust the tension of the X-axis belt. This mod does not…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This door handle is an upgrade to the base handle for the delack enclosure. I wanted something larger that I could easily grab when opening/closing. This fits the same bold hole and fits the M5 nuts that come with the enclosure. I suggest…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The goal of this upgarde is to get the full print bed available, completely prevent collision and improve the thermal performance in the most foot print efficient way, to compeat with the materials capability of the Core One. I get easily…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgraded nut for angle grinder disc saver
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000426 : Planetary holder
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000430 : Planetary shaft (use 2)
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgrade for the original, standard houses and hotels of the Mickey Mouse 75th Anniversary Collector's Edition monopoly. Contains the reels and vaults that upgrade the property development tokens. I used a .4mm nozzle due to time and they…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…
Added a donation button for the people who want to buy me a coffee. Prusa Mini LCD backcover Protects against dust and dirt and keeps your PCB save Fits exactly Use a 3mm - 25mm screw Nice upgrade Step files included Print instructions…
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
**SPECIAL NOTE: I've installed this only on my printer, if your printer is different, let me know and I will see if I can find a way to help. Watch the video, if you're just looking for the install, skip to that part. Print from…
Printable parts for the MK2/MK2S/MK2.5 to MK2.5S Upgrade. Note this is a legacy download. As MK2.5S is an upgrade for the older MK2, MK2S or MK2.5 printer, other parts not listed in this print are available as the MK2S parts:…
__________________________________________________________________________________________________________________ Collection of all my upgrades for Ender 3 V3 SE Heatblock fan mounts: Best airflow 4020 mount 4010 fan mount Smallest 4020…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Printer mods: Tool holder Filament spool handle…
Advantages : Better support for the foot extension. Foot extension will never fall off again. You will never lose the foot screw. 2 versions : with or without the bottom panel Recommended Print Settings : Nozzle : 0.4 Layer height : 0.2…
Not recommended for beginners. also available on Makerworld https://makerworld.com/en/models/1636170-mmu-multi-material-upgrade-diy#profileId-1728491 The Pico MMU is an open-source project designed to enable multi-material 3D printing on…
Video guide: Text guide: https://e3d-online.dozuki.com/Guide/Convert+your+stock+Anet+A8+to+the+Hemera+toolhead/131#s1512 Get the ready-to-go firmware here: https://toms3d.org/wp-content/uploads/2019/11/Marlin2-source-A8-20191129.7z…
Eliminate the sloppy fit between your filament spools and the spool holder that came with your Creality printer. This poor fit causes eccentric rolling of your spools while printing which can lead to non-uniform extrusion as the extruder…
I rotate 90 degrees, increased 1,5mm of the lock and made the hook that rests on the printer thicker, about 1.5mm (previously it was 1mm). In addition to these other changes, I placed the Letters K1 on the side of the spool holder PLA…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
this is an upgrade of ''dummy13FANBOY'' version including a revised version of the frame and new upper and lower armor parts to fit an extra set of arms. I added flat spot on the second set of joint on the frame for easier printing and…
Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…
Printable parts for the MK2 / MK2S to MK2.5 upgrade. Note, these are the parts for the MK2.5 upgrade, not the newer MK2.5S upgrade.
Update: 6 june 2019. I've made a new version with even more clearance, and even more robust walls. It's visible in orange in the screen grabs (V1 in cyan, original in red). Keep in mind that this version is designed for use with socks,…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…
I love the game Sky Team and played it a lot, but activating the cardboard switches did not feel very satisfying. My design features real switches with status LEDs and automated LEDs for the landing gear, landing flaps and brakes. All…
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Creality Ender 3 / Pro / V2 (?) --- I can only assume this could work for the V2... don't have one to test with. Part Cooling / Hotend…
Please give it a ❤ if you like it 🥰 Video : Please give it a ❤ if you like it 🥰
For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…
this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…
This mod is meant to make your life easier when you need to couple/decouple the PTFE tube. Bill of Material ECAS04 PTFE connector M3x20mm SHCS threading screw (one of the screws that were holding the bed for the shipping) M3x6 mm FHCS…
Moving the filament holder from the top position to the side will increase the stability of the printer while improving filament guidance to the extruder. As an addition to this filament holder on the side of the printer, I recommend…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
The original was slightly modified and the storage compartment was added on top. It is designed to hold various tools, printing plate(s) and stash the glass cover higher when necessary, especially when printing with PLA. This design was…
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…
The Bear Frame Upgrade : With the current bear parts, you won't be able to upgrade to the MK4(S). Since Greg sadly can't update the bear project himself right now, I decided to fill the gap, so that we can all continue to use our Bears…
Original Prusa MK2.5 to 2.5S Upgrade Printable parts. Note this is a legacy download. As MK2.5S is one of the upgrades for the older MK2/S printer, other parts not listed in this print are available as the MK2S parts:…
