312 modeli
Made a Pitt refrigerator magnet and have embedded 3 8x3mm magnets. There are filament change stops for the magnet insertion, which is first(4.55) and then the color change(6.80). Printed on a Prusa MK3S+. No supports
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
The spitter from Factorio is ready for printing. It shares the same scale as all other official Factorio models. You can pick from four different poses. Variants with more complicated geometry are in two parts for easier support access.
This cherry pitter is designed for pitting pie cherries, so it is smaller than some of the other cherry pitting tools I've seen on this site. Update 7/10/24 Added v2. Increases the size of pitting mechanism to accommodate larger cherries…
Simple one piece cherry pitter made for roughly 25mm (1") cherries. If you have some huge ones, scale accordingly. Printing: PETG 0.2 layer height, 4 walls, 5 top and bottom layers, 25+% gyroid infill Use your favorite supports.…
Pittsburgh Steelers 1st Layer White 2nd Black 3rd Yellow (made thicker) 4th Red 5th Blue
Simple edit where I removed the walls and made the base more compact for a non-stackable low profile wrench holder that takes less space than the original model. Printed two of each model for the complete wrench set.
This cherry and mirabelle plums pitter reliably removes pits and is easy to clean. It is printed in one go. No additional parts required. Enjoy cherries and sour cherries season! 🍒 After kilograms of cherries and sour cherries this cherry…
SKaranko has made nice cherry stone removal tool. Though, I noticed a bit room tune-up the design. 1) The rounded end, friendlier for you palm 2) Thump plate 3) Hammer head a bit longer and tilted more in 4) Position slots for the hammer…
Terrible Towels! This logo can be printed in full-color with or without MMU; each part can be printed separately and assembled after. Use the pause-and-change-filament method from white to black for the letters in the main white circle…
A 3×1 Gridfinity tool holder for PITTSBURGH 3/8 in. Drive Metric Crowfoot Wrench Set, 7 Piece . The craftsmanship on these is really poor, and the “base” of each of them varies pretty heavily, so I left the tolerances very loose. You may…
Hello I created these models to store my 32 Piece Harbor Freight Pittsburgh wrench set found here. https://www.harborfreight.com/fully-polished-sae-metric-combination-wrench-set-32-piece-68854.html It is designed to print out 2 of each…
Hi I design a smal lamp with the Pittsburgh Steelers Logo Print the Logo in clear or withe PLA, the last 7 layers in yellow and the letters last 3 layers in black. You need: Black, Clear/ withe and Yellow Pla LED white Stripes ( I…
Here is the awesome looking Pittsburgh Steelers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n propeller improved Print Settings Printer Brand: ELEGOO…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This is an amalgamation of the Roctopus_ https://www.printables.com/model/391802-rocktopus and this threaded model.
Monster standee replacement for the board game Gloomhaven. Standee Count: 6 This one took me a while but here you go, yet another spitting drake. Cover picture by liquidlogic Works with number bases found here:…
Holder for Harbor Freight PITTSBURGH Universal Joint Socket Adapter 3-Piece Set After printing an organizer for my Harbor Freight socket adapter set, I decided to design this one next. Piece by piece I will be designing organizers for my…
This is one of my best makes, It took me a while; prints fast. DEPENDING ON YOUR PRINTER YOU MAY NEED SUPPORTS.
Holder for 8 piece, Pittsburgh punch set from Harbor Freight.
Pittsburgh caliper holder for IKEA Skadis pegboard. Print vertically w/ supports
Perfect cherry pitter with sources for excellent cherry jam. It is lightweight, convenient, reliable, easy to print. You will appreciate it if you like pitted cherry jam. Print using PETG in your favorite color.
For use with Harbor Freight's Mini Pick & Hook 4pc Set . Use with 1" spacing pegboard.
At first glance, she might look a bit silly – and honestly, she is. But I think it's impossible not to love her. 😍 Despite her look, she's just so adorable. However, be careful, she loves spitting at people she doesn't like. 💦 If you'd…
Tool Holder created for the Harbor Freight Pittsburg 7pc Nut Driver Set. Found Here: https://www.harborfreight.com/sae-nut-driver-set-7-pc-69109.html Generated base 5x4x4hi base using jdegs' Filled-in Gridfinity Boxes CadQuery script…
This is a toolbox socket organizer for the 13 Piece Pittsburgh Pro 1/2" Drive Metric Impact Socket Set from Harbor Freight. There are two versions: one with the labels vertically aligned with each other, and one with labels aligned to the…
Harbor Freight has a cheap pass-through wrench set, but the packaging it comes in is barely reusable. I get that these tools might not see a ton of use, but still wanted to make them easier to grab. The tray is also deep enough that you…
Designed to hold a set of 1/4" Pittsburgh Harbor Freight metric sockets: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11m, 12mm, 13mm, 14mm https://www.harborfreight.com/14-in-drive-metric-high-visibility-socket-set-10-piece-67940.html See my models…
Here is a great gift or personal treat: Pittsburgh Steelers Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print…
This is to replace the battery cover for the (I believe) newer version of Pittsburgh brand digital calipers from Harbor Freight (see photos). I printed it in PETG, but PLA would probably work fine as well. I recommend printing it with the…
Holders for Harbor Freight's Pittsburgh Metric and SAE (Imperial) Metric Long Ball Hex Socket Sets. These are based on @ICEngineering's model for the Husky 7-pc Metric Long Ball Hex Socket Set . I rebuilt the basic design in OpenSCAD and…
Battery Cover for Pittsburgh Caliper
Craftsman SAE 12 pt Socket Organizer 1/2" drive Craftsman Metric 12 pt Socket Organizer 1/2" drive Craftsman SAE 12 pt Socket Organizer 3/8" drive short Craftsman Metric 12 pt Socket Organizer 3/8" drive deep well Craftsman SAE 12 pt…
Pittsburgh Penguins logo. Ready for MMU2s printing. It does have some minor issues when printing with fitment of the parts. Like the Penguin belly white isn't fully touching the black border and needs adjusting.
This Gridfinity socket holder is designed to hold Pittsburgh ½" Torx sockets. The footprint of this model is 1x5 gridfinity spaces. It is embossed with the sizes and the lettering could be painted with a paint marker or nail polish to…
I printed in PLA on a P1S, split into to two parts. It should fit on a single build plate, but I wanted to test the fit first and the Gridfinity base will hold the pieces together just fine.
Current logo of the American Football Team Pittsburgh Steelers
A socket case insert for the Pittsburgh 3/8 in 40 piece socket set sold at Harbor Freight . The original insert was terrible and mine actually came already broken. This insert presses the sockets and the driver up against the lid of the…
Here is your perfect model for 3D printing in Black and Gold!! LETS GO BUCKS!! When printed at 0.2mm layer height, make the color change at layer 21
Simple Allen Key Holder for the Multiboard system. Designed to fit the Pittsburgh set from Harbor Freight.
A harder version of the treat hole with additional paddles and fake paths in the interior.
This model to suit my 7 Pc. long reach hex bit sockets. The sizes available are metric and a SAE (standard inch) option! This fits in a 3x4 Gridfinity grid. I only have renders of the metric set currently, make sure you choose the right…
Simple pegboard holder for 1lb Harbor Freight Pittsburgh-branded dead-blow hammer. Since Harbor Freight tools are usually a crappy copy of some better tool manufacturer's design, it's very likely that other 1lb dead-blow hammers will fit…
2x4 Gridfinity holder for Pittsburgh Digital Dial Indicator
HSW - Pittsburgh Allen Wrench Holder
Organizer for Harbor Freight Pittsburgh 9 piece Torx bit set. T10, T15, T20, T25, T27, T30, T40, T45, T50.
Trays for the Harbor Freight PITTSBURGH Impact Socket Set (Metric). The original model is one continuous unit, but to make it easily printable and more modular, its offered in 2-piece and 3-piece options. Each tray has a gridfinity height…
If you are looking for a lamp with a Venus Flytrap esque vibes, look no further! This is a Crash Bandicoot inspired lamp, which uses an e14 light bulb and a a cord set (standard ~27mm outer thread diameter, with a loose power cord as seen…
Gridfinity compatible holder for Harbor Freight Pittsburgh 3/8" & 1/2" Drive 9 pc. Hex Bit Socket Set (SAE) (pn: 67884). It is 1x5 and the numbers are raised so it matches @Jaykoski_1768370's model for an accompanying product. I printed…
Designed to hold a set of 1/4" Pittsburgh Harbor Freight SAE sockets: 9/16", 1/2", 7/16", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16" https://www.harborfreight.com/14-in-drive-sae-high-visibility-socket-set-10-piece-67906.html See my…
Gridfinity modules to hold a 3/8" torque wrench from Harbor Freight. Swap colors where the text starts for readable labels https://www.harborfreight.com/38-in-drive-5-80-ft-lb-click-torque-wrench-63880.html
Custom Inserts for the Milwaukee Packout Organizer (48-22-8430) to store Milwaukee Gen2 High Torque Impact and Harbor Freight Impact Sockets. Once printed, you will have to cut part of the packout "middle" wall to accomodate the anvil of…
A landing gear for the Eclipson PITTS S12 that will take larger 65mm wheels. Useful for when you need to lands on grass. You need to mirror all parts in your slicer for the other side! Requires a 200mmx3mm rod for strength, just like the…
Socket Tray Organizer for Harbor Freight Pittsburg Pro 1/2 in. Drive Metric Impact Hex Socket Set #67895. Apologies, my first CAD and I'm still learning.
Tested with both .4 and .6 Nozzles Used PLA Height .20 10% Cubic 2 Wall Perimeters
Made for: https://www.harborfreight.com/12-in-drive-metric-impact-socket-set-13-piece-69345.html Model has the sizes as a separate object if you have a multi color printer. You can also remove that object so the print will have the sizes…
This knob is to prevent you skinning your fingers when using the harbor freight 1 ton engine hoist, which has the most terrible hydraulic valve "knob" (a metal shaft). It is impossible to get good control with the built in method and easy…
Gridfinity PITTSBURGH Precision Screwdriver Set from harbor freight
I made a Spitting Drake stand-in for Gloomhaven! I know that the official art is of a hexapedul dragon, but I really prefer my dragons quadrupedal... so that's what I made =) I printed this with a .25 mm nozzle using .05 mm layers. Given…
Sometimes you need the bigger hammer. Same idea as my 1lb dead blow hammer holder but sized for the bigger 2lb hammer. Sized for 1/4" holes on 1" spacing. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.3…
I've included SCAD files and STLs for these models. These models print fairly nicely alone, but things can get a bit stringy when printing multiple pads at once. The other end of the ¾" Pittsburgh clamp and ½" Pony clamp screw/moving end…
This is a really fun Pittsburg Penguins hockey puck that you can display in your house or even play hockey with! Print Settings Rafts: No Supports: Yes **Resolution:** any Infill: 20-40% **Filament:** any pla/any black and yellow…
Trays for the Harbor Freight PITTSBURGH Impact Socket Set (SAE). The original model is one continuous unit, but to make it easily printable and more modular, its offered in 2-piece and 3-piece options. Each tray has a gridfinity height of…
Will work for the following Harbor Freight SKUs: -SAE 67884 & 93203 -Metric 67880, 98229, and 93193 It should fit onto a 10-inch print bed.
I made this set of organizer trays for a 60pc Pittsburgh Tap and Die set from Harbor Freight, whose shitty blown plastic case takes up entirely too much real estate in a drawer. This makes the entire set a tight fit into the old-style…
Hello, this is Logo of Hockey team Pittsburg Penguins created for Multimaterial print. Colors: PETG Prusament Signal white PETG Prusament Mango yellow PETG Prusament Jet black You have two choices 1, You have MMU and you can print it…
My take on on the best way to hang my t-handled hex keys, in two segments. The smaller wrenches 2mm-4.5mm on one rack, the 5mm-10mm on another. Balances use of X,Y,Z volume and for my purposes, enables me to have the ones I need close and…
Really liked this Gridfinity holder for my thumbwheel ratchets from Harbor Freight. Made a few changes to make it fit into my Gridfinity setup a little better.
Needed a shorter profile for my shallow drawers. total height of my model is 25mm, with the bits installed it is 39mm. No supports needed.
Multi-Color Pittsburgh penguins coaster that I designed for my brother. This was designed with the Palette 2S in mind. This was a gift idea and is no way meant to be sold. This is a remix of my design I made last year. Print Settings…
Hang your PITTSBURGH Mini Pick and Hook Set on your Multiboard.io for easy workshop access! PITTSBURGH Mini Pick and Hook Set from Harbor Freight ( https://www.harborfreight.com/mini-pick-and-hook-set-63697.html ) Check out the…
Pittsburgh Penguins Oversized Necklace Logo that I designed. I hope you enjoy!
Most things are for Husky Sockets. May work with other brands. The extension holder will most likely work with other brands.
Pittsburgh Steelers 4-Inch Drink Coaster! This model was originally designed as a test for myself while using a new CAD program. As a result, the coaster is not a perfect representation of the Steelers Logo. I was trying different methods…
I made this holder for the 5-piece pin punch set. https://www.harborfreight.com/5-piece-long-drive-pin-punch-set-93111.html
Super simple and durable jackpad with a hexagonal design on top for grip. Designed to be printed in 95A TPU without any supports. I went with 6 walls and 60% grid infill to make it strong and resilient while retaining just a little bit of…
All of my files are FREE to download. If you enjoy my work, please consider supporting me on PATREON . By joining, you can ask me to create , or to modified your desired 3d printing model and help keep my creative projects alive and free…
This is a cookie cutter of THE STEELERS
This is a AAA battery holder for Pittsburgh calipers. You no longer need to buy coin cell batteries that die too quickly. This is friction fit and you do need to remove the bottom portion of the battery wrapper so it can complete the…
have fun prints good in 0,2
I bought some cheap tools for work, but couldn't find a good way to carry them around in a tool bag or roll-up. Modified the rugged case that's all over the place and made an insert for the box that securely holds the tools in place. FYI,…
This Jack O'Lantern pumpkin looks as if it is spitting anytime his head is pressed down to dispense liquid soap. The Jack O'Lantern snaps right onto a Softsoap branded antibacterial soap nozzle. Just slide the nozzle tip inside and press…
Holder for Harbor Freight 1lb dead blow hammer. Remixed the original pegboard model by removing pegs and adding holes to screw into wall. The holes are on the small side, you can enlarge with a drill if you have larger screws.
Hail, mighty warriors! If you'd like to smith your very own Vorpal Laserblaster, you've come to the right place! A STEP file has also been provided to allow you all to remix and make changes easier, since editing STL files is abysmal.…
Wall-mounted clamp holder. Sized for Pittsburgh 6" Quick Release Bar Clamps. Also fits Bessey LM2.004 4" Bar Clamps. Might fit others. Use #8 wood screws (1"+) to mount.
See original model by Dany Sanchez for description.
Gridfinity modules to hold a 1/4" torque wrench from Harbor Freight. Swap colors where the text starts for readable labels. Includes spots for the extensions that come in the blow-molded case.…
Pittsburgh Pirates Oversized Necklace Logo that I designed. I hope you enjoy!
Holder is a stackable 2x5x6 bin.
This model takes up a 1x4 grid slot.
Needed a way to store my Harbor Freight Pittsburgh ratchet adapter reducers, it brings a set of 4, modded this design to two different sizes for the harbor freight sizes and added some text to know what dimensions they go from and to
Pittsburgh Steelers Oversized Necklace Logo that I designed. I hope you enjoy!
This is a simple 2x5x6 Gridfinity holder for the Pittsburgh Pro 1/2"-drive 8-piece impact hex driver set.
a gridfinity holder for the harbor freight Pittsburgh pin punch set, 8 piece I will say they are a bit of a snug fit but I made like such to prevent roll around In my box. Might come back through on a redesign in the future after a few…
Pittsburg 13 Piece Impact Socket Holder in metric, printed 10% fill, 0.3 mm
Gridfinity modules to hold a 3/8" Drive Flex Head Ratchet. Swap colors where the text starts for readable labels. https://www.harborfreight.com/38-in-drive-flex-head-ratchet-70150.html
This model takes up a 1x6 grid slot.
Tired of the cheap metal holder the units come with that wont stand up on its own? This is for you!
![PITTSBURGH 1/2 in. Drive Impact Deep Socket Set (Metric) [69561] (Gridfinity Options)](https://media.printables.com/media/prints/caebbc55-3c7a-4b3a-9ad9-a43a95afb491/images/10795587_78370f01-bb0a-4c6e-824e-d9d613e123d0_1807a78c-8961-4db9-8396-9e59f0475daa/pittsburgh_deep_impact_sockets_metric_69561_screenshot.png)
![PITTSBURGH 1/2 in. Drive Impact Deep Socket Set (SAE) [69560] (Gridfinity Options)](https://media.printables.com/media/prints/3333bc54-ee12-4bf1-8d63-2e45d093faaa/images/10795543_8194691c-c039-4127-82a5-b5571bb840ad_50e3b2e4-e001-4fe2-9455-f7502d6468ff/pittsburgh_deep_impact_sockets_sae_69560_screenshot.png)
