IKEA PLATSA hole plug
Simple design to hide the IKEA PLATSA small holes. Prints fast and without supports.
- Pobrania
- 73
- Polubienia
- 5
- Ocena
- 5
Liczymy pasujące modele…
Simple design to hide the IKEA PLATSA small holes. Prints fast and without supports.
Bill of materials Description Amount 12v, 50cm LED bar (works for 60cm wide PLATSA) 1 Mounting instructions Mount up one of these end-caps with a single screw. If you install the LED-bar close to a hinge, mount up the end-cap which is…
Tag Leiste für Ikea Platsa Korpus um Etiketten der (Un)original Prusa Drybox Filament Box zu ordnen zu können ohne sich den Schrank zu versauen. Etiketten können leicht gelöst oder über geklebt werden.
Remix of Inertpyro' awesome aperture door ( https://www.thingiverse.com/thing:529661 ), combined with AcE_Krystal' genius servo driven open/close function to fit 120mm fans in Ikea Platsa enclosure. Or any other 18mm (3/4") thick plates.…
Second Attempt with some Changes now. !!Work is still in progress. Materials list and files are not complete at the moment!! waiting for my second anti vibration mat and a new (smaller) stone for the Mini. All work will be continued here…
UPDATE 2025-05-26 : Added “100mm-tube-connection”, to be used with https://www.printables.com/model/1337372 for ducting to IKEA UPPÅTVIND! UPDATE 2023-01-09 : Added the possibility to use a filter on the inside of the cabinet…
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
A simple spool holder to fit the Ikea PLATSA closet. My previous design had a filament guide to it, but for the sake of reusability and flexibility, I found it better to make that into a separate part . Spool requirements: Minimal inner…
I've redone my filament guide to only require a single PC4-M10 coupler. While also making insertion of filament more convenient. For the utmost convenience when inserting filament, use a countersink drill bit on the end of your PTFE-tube.…
A simple 2 piece grommet to neatly guide the power cable of the Prusa MK3S through the backplate of an IKEA PLATSA closet enclosure. Or any backplate that is 3mm thick. The diameter to drill in the backplate is 30mm. Inner diameter of the…
Simple 3 and 5 build plate holder for Ikea Platsa Cabinet. Pre-drilled holes. Needed 20mm screws. Added two differents sizes, for 3 and 5 plates. And modified with holes design. Updated using internal pre-drilled holes on platsa. Printed…
These clippable door handles will attach to Ikea Platsa shelf doors or Småstad drawer fronts. Print vertically for increased strength and to prevent delamination at the stress points. Use double-sided tape on the front sides to ensure the…
A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG
Yes, it's another steel sheet holder for the MK3/MK3S/MK52. But this one is for the Ikea PLATSA. There wasn't any yet, so it's fine 😉 Made to have a tight grip on both Prusa's smooth and textured sheets. With any other sheets, fitment may…
Most filament guides I found were just plastic conduits through the lid, and in my experience the filament scratching across the plastic gets amplified like crazy by the enclosure. So I came up with this idea of running a PTFE tube…
I want to reduce the Weight on the MK3's Frame and have a shorter Way for the PTFE-Tubes before the MMU Unit. The MMU moves into the upper shelf of my IKEA PLATSA Enclosure. To got the Filament down to the Printer i've designed that…
I didn't want the door to my Platsa enclosure to be all the way open when printing PLA, so I created this simple door stop. It is one piece, print in place. Doesn't require any supports.
Remix of the Parametric SKADIS Board Generator for my ikea platsa 3d printer enclousure. The existing holes of the Platsa cabinet can be used and there are already spacers in the model. For more Skadis add-ons, check out my other models…
Simple quick 2 build plate holder for the Ikea Platsa cabinet fit the pre-drilled holes, screw holes spacing set at 20mm as per Ikea Platsa cabinet. If you have any problems and design failures please comment back your feedback. Version 2…
Remix for Kobra 3 Build Plates with 268mm x250mm with more Honeycombs reducing the Filamentusage by 15%
These are Handles for Ikea Platsa (FONNES, KALBADEN, SANNIDAL, SKATVAL)
My design to mount a Logitech C920 webcam for Octoprint. I used PLA for this wall mount. i used 2 screws of the IKEA HJÄLPA hinge for mounting into the Platsa. Support need for print. See print orientation in the picture. Print…
After the Prusa Mini needs the filament from the bottom, I redesigned my already used Bowden Feeder from my MK3s. Changed the angle for 45°, so it's not feeding upperwards. Added M6 / M10 Versions ; with "easy to print versions". Original…
I got a request for a variation of my steel sheet holder to fit Prusa Mini-sheets, so here it is. Sheets are intended to be oriented front down. Printable on the Prusa Mini's heatbed when oriented diagonally. I don't have a Prusa Mini, so…
Update My newer version comes recommended, combined with my separate filament guide . That combination provides numerous benefits, like being able to mount it any time to either side of the closet (not having to pick a dedicated version)…
Really simply design. Its a remix from Platsa Spool Holder WITH 608zz Bearing !!! Its a remix from my 69mm wide version https://www.printables.com/model/2218 VIDEO: https://www.youtube.com/shorts/e5d2CM1RgiE
A pin for hanging or fixing things to the holes in an IKEA Platsa cabinet. I use it to hang things directly on it or to attach other prints without using screws. For example the hygrometer mount from @ProwlerON.
Summary Conceal unused shelf holes in cabinets and bookcases for a cleaner, more refined look – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring compatibility…
Plug for the threaded holes in the Platsa top/bottom plate. With 3mm hex to easily assemble them with a hex key from inside of the cabinet. Have only printed them in PETG as that was the white filament I had at the moment, guess PLA will…
Filament holder wall mount for Ikea PLATSA, need the "Filler - Filament Holder" Remixed from this wall mount: https://www.thingiverse.com/thing:4397167
Remixed from: https://www.prusaprinters.org/prints/45286-tp-link-tapo-c100-mount https://www.thingiverse.com/thing:3987496
Summary Make perfect use of the shelf holes in your furniture body and create new possibilities! – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring…
Just another toolholder. I designed it for my Platsa enclosure and its possible to use without screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0,3 Infill: 10% Filament: Prusa PETG PETG…
Logitech C270 wall mount for Ikea Platsa cabinet, using the stock hole pattern. Pictured is the wall mount, with 2x adjustable arms from Agent_Cain ( https://www.thingiverse.com/thing:2510749 ) - and the camera hinge from luc_e (…
Second design of the Platsa Pliers hanger. Strenghtened the outter walls and extended the thickness to 4mm. Also extended the "legs" to ~70mm. Simple and fast 2 print. Printed in PLA/PETG/Does not matter.
Adapted handle for IKEA Platsa door I have designed 3 versions with Fire sword (Ninjago) blank small Print instructions I print it without supports.
I wanted to mount ma camera on my ikea Platsa enclosure, so i remixed this mount to fit the holes. You can screw the mount in the already existsting holes using some M4 screws, they fit in very snug. Have fun, I hope my remix is usefull.
I was testing the Cable Grommet Shaun Doe posted. However after printing i figured out, hey the sidewall is thinner than the top and bottom ones :-D so the 22mm ones didnt fit perfectly. So i decided to adjust to 18mm sidewalls and…
Just to guide Filament into an IKEA PLATSA or all other 22mm thick wooden boards. You need 3x M4x10 Countersunk Screw's 3x M4 Nut 5x 4mm Pneumatic coupler
This set of parts provides multiple cover choices for EllingEG 's great IKEA Platsa Grommet. Slot widths are 7mm on my pre-made ones, but the template can be edited to make your own entry options.
Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión
Rod holder for the HJÄLPA Clothes rail [compatible with PLATSA storage solution] (503.312.05 / https://www.ikea.com/nl/en/p/hjaelpa-clothes-rail-white-50331205/ / not available anymore unfortunately). This design allows you to easily…
I only found PLATSA holders for Blink Mini cameras requiring a magnet or they don't fit the PLATSA hole spacing. So I designed my own camera shelf you can simply screw in. Print it with the face of the back plate down and you are good to…
This is a remix of IKEA Platsa 120mm fan with filter to use a bigger 140mm fan and a 20mm filter. 20mm Filter ( amazon ) 140mm fan ( amazon )
Inspired by Chrizzly' cotton pad dispenser ( https://www.thingiverse.com/thing:3575562 ) Designed to fit the hole pattern in the Ikea Platsa cabinets. The holes are off-center, so there is one version for each side. Printed in PLA, 0.2…
Türgriff / Griffeinsatz für die älteren IKEA Stuva/Platsa Schränke. ============ Door Handle / Handle Insert for the older IKEA Stuva / Platsa cabinets.
Updated to improve rigidness. Hinge for Acrylic/Perspex Door and IKEA Platsa cube designed to align to Platsa predrilled holes. Requires: M3x40mm screw M5x10mm screw and nut Screws to fix to Platsa frame My Acrylic Door Specifications:…
A tool free Prusament Knob/holder for any type of Platsa or lack, or even wardroves. You can adapt it even to use direct with an m8 screw in any door. Here a Video :) https://www.youtube.com/shorts/mM79j7JwTUY You Need : 1 x 0_door_handle…
This is a simple non-damaging base plate for Ikea Platsa to be able to design your own accessories for the cabinet (e.g. thermometer, hygrometer, cam, tool holder, …). Here is a holder for a ThermoPro TP50 that can be glued to this…
Found a similar design on Thingiverse, but didn't fit the Thermo pro, so remastered the design and also made it thicker and stronger to last. Print in PETG
I"ve adjusted the orginal design to fit my IKEA Platsa enclosure. The IKEA Platsa panels have predrilled holes every 2,5cm. So I've adjusted the magnetic wall plate to fit the PLATSA predrilled holes. I used 6mm x 3mm magnets because…
Added a cut-out part in the center of the model by Mocodroid to make it fit on the IKEA PLASTA open wardrobe.
First one is a press fitting to the back panel of the IKEA PLATSA (will fit others as well). Second fits 21-31 mm thick shelves (or walls, not a single PLATSA though). Third fits 32-38 mm thick shelves (or walls, made to fit dual PLATSA…
Marcos para puertas de metacrilato para cerramiento platsa Ikea. Para insertar metacrilato o plexiglas de 500x250x2mm. Una vez impreso se puede pegar. Yo opté por unirlos mediante soldadura con un estañador viejo. Incluye ranura para…
I didn't like the available sheet holders, mainly because they were all one piece. This version will use a lot less material and is easy to install. Holds 3 sheets. Print with the sheet slits facing upwards. Doesn't require any support.
Needed a good place for the Textured sheet when i don't need it. So I created a simple mount for my Ikea Platsa enclosure to fit 2 sheets. Designed it tight, so the sheets won't rattle. Printed in PETG, would also be no Problem in PLA.…
I designed this spool holder mount for IKEA PLATSA and a compatible filament guide for the Ender-3 series. The mount fits Hugo G's - Filament Holder and has an integrated filament guide. There is a small tunnel for a IKEA LED strip, wich…
Logitech C920 Platsa mount with adjustable camera angle PLA\PETG 0.15\0.20 No support needed
DIN rail endcap to mount it between two parallel surfaces. I intended to use to mount a DIN rail with some power supplies and relays between to legs of a modified Ikea Lack enclosure. Update 2024-04-25: Added v5 with modified 50mm hole…
Alternative mount for the ikea HJÄLPA which I use for filament storage in my PLATSA enclosure. You can use the screws supplied with the HJÄLPA they fit very snuggly into the holes. The included gcode prints 2 of the mounts at 0.20mm layer…
Höhenverstellbare Füße für IKEA Stuva/Platsa Schränke. Das Druckteil selbst ist 7cm hoch und es wird eine M8 Schraube sowie eine M8 Sechskantmutter benötigt! Je nach Länge der Schraube ergibt sich dann der Weg der Höhenverstellbarkeit! In…
A simple holder to mount the assembled Models in my Platsa cabinet. For assembly on the right, mirror the model in the slicer. It would probably have been easier to fix the ball joint in the hole with a screw. But this idea only came to…
This is a modular tool rack for IKEA Platsa enclosures.
This is the fan case and mount for my cabinet ventilation project. The housing for the controller can be found her : https://www.printables.com/de/model/162908-housing-for-cabinet-ventilation-control
Hooks for mounting a skadis board to a door of an Ikea furniture. There are 3 Versions. One for Pax with 17 mm doors, one for Pax with 19 mm doors and one for Platsa doors. Can be printed without support. GCode provided for PLA and PETG
Really liked this design, so had a go at remixing it for Ikea Platsa. Platsa shelf holes added. Made back slot wide enough to hold a steel sheet with Garolite print surface.
Reverse bowden adaptapter for Ikea Platsa and Original MK3s+ frame, with doble M10 racord. Please, use that extruder adapter to close reverse bowden circuit: https://www.printables.com/es/model/295803-prusa-i3-mk3s-reverse-bowden-set If…
A simple cable duct for my Ikea Platsa cabinet project.
Easy to print. Retain the saved orientation. Support structures and brim are not required. Use countersunk screws for mounting. My settings: PLA Infill: 25% Supports: no Brim: no Wall lines: 3 Layer height: 0.2mm
One of the first things I've designed! I had a cheap webcam (W2 1080p Webcam) lying around and wanted to make a mount that used the existing IKEA PLATSA holes. I wanted the camera offset from the front of the unit and also for the…
The original model by @MagnusT serves as the basis, which, like the Smallest possible ESP32-CAM (Taller remix) by @mdzi , was enlarged to 17mm height. This means that the ESP fits into the housing with its legs. Unnecessary contours and…
This is a mount for a webcam that has a mount such as the Sandberg tripod ready series. Print instructions Print the holder together with two bars, once prints are completed add tabs of glue into the holes and inster the bars. Make sure…
This is a simple mount for a Raspberry Pi 4 Model B using the mounting holes in the IKEA PLATSA cabinet system . This model fits the Raspberry Pi 4 Case With Cooling Fan v3.0 from The Pi Hut . The two parts should interlock securely, but…
I simple holder for the hygrometer
After placing my Ender 3 Pro in a IKEA Platsa cabinet I had to change location of the filament spool. I have a stand-alone holder which sat next to the printer, but it moved while printing resulting in grinding against z-rod and touching…
Changed the model a little - I like it better =)
Filament guide for my Besta build. Mounted it on top, above my printer with the spool mounted on side. diameter ptfe guide 4,3mm diameter screwhole 4,2mm
In this remix, I simply added slots for 5x1mm magnets to make the lever sit more securely when it's flipped up and we all love a good snap.
Thought it would be cool to have a completely portable Prusa Mini (that's why I also designed a PSU holder for "on the fly changes") so i designed a small holder for the Orginal Prusa Mini Filament Spool Holder. Holder can be attached…
Arducam 16/64MP Camera Mount for IKEA PLATSA 2x Screws 4,5 x 16
Camera mount for the Eufy 2K Indoor camera. For mounting the camera in the top, front, right corner of a Ikea Platsa enclosure. This will put the camera in a position that allows you to view the entire enclosure. Easy to print, doesn't…
A Plate to mount something (with M3) an the side wall without damage the wall.
Using plastic pin mounts to secure angled aluminium LED extrusion in the Ikea Platsa enclosure. Simple screwless installation using pin-mounts that fit into the existing holes in the side of the enclosure. Printing Enclosure base mount…
Hallo, ich habe eine Werkzeugleiste für den Plaste Ikea Schrank erstellt. Der Halter ist mit Sunlu PETG White gedruckt und die Spachtel in Teqstone ABS White. Hi there, I made a toolbar for the plastic Ikea closet. The holder is printed…
Designed some LCD Holder for Ikea Platsa. It is designed so that the display can always be removed for work. Ich habe einen LCD Halter für Ikea Platsa konstruiert. Das Display kann zum Arbeiten abgenommen werden und danach wieder…
Print with supports. I used adhesive to attach it to the PLATSA.
Holder for a blink mini cam with 15x3mm magnet Print instructions printed without support
This is a holder for a ThermoPro TP50 thermometer than can be glued at my “Non-damaging 3 pin base plate” for usage in an Ikea Platsa. I recommend to use UHU Plast special glue for this. I have attached the original FreeCAD (I am using…
PTFE Pass throug Ikea platsa 18mm M5 Coupling I printed it with Prusament PETG
Reverse bowden adaptapter for Ikea Platsa and BEAR frame, with M10 racord. Please, use that extruder adapter to close reverse bowden circuit: https://www.printables.com/es/model/295803-prusa-i3-mk3s-reverse-bowden-set If you have a…
Remixed mykos's spool holder to fit in the back of the spacing of the holes in the back of the cabinet Compatible with HugoHuge designs
Trust Trino webcam mount for IKEA Platsa with extra stability.
Inverted model of my other door design for Ikea Platsa. On this occasion, the hexagons are in the lower part for the intake of fresh air while the hot air is concentrated in the upper part and is extracted by the fan. It also has a slot…
The original design had a pin mount for USB and dual SD cards, but only a mount designed to be taped to the enclosure for the Prusa Mini Tools and USB stick. So as a first remix I thought I'd add a pin mount version. Printing Material: I…
These hairspray holders are specifically designed to fit in the standard 25mm spaced M4 holes in IKEA cabinets, like the PLATSA, but work perfectly well hanging on any wall, though do keep in mind to keep it level when you do that.…
Hygro Indicator Mount for IKEA Platsa or any other cabinet with 25mm hole distance. The ball head connection allows to find the perfect orientation. You can find the Thermometer Hygrometer here:…
Fits IKEA Platsa 60x55. I found an old IKEA curtain holder and used that as “pipe". Approx 19.5mm. The 3mf file is cut with a slight angled dove tail. If you want to make your own cut in a slicer you can use the “full” file. Added step if…
Wer seinen Drucker nicht im Erdgeschoss stehen hat, der möchte vielleicht seinen Untermietern einen gefallen tun und die Vibrationen des Druckers etwas abdämpfen. Ich habe mir einen Druckerschrank aus dem IKEA PLATSA Sortiment gebaut und…
“Why do you need a 3D-Printer?” Quote: My Wife, 2020 Now she is my best “customer” We have this IKEA Platsa cupboard in the kitchen and my wife wanted some hooks for towels. So I made this with a 8mm wooden rod, which I had still at home…
Remix of the original to use plastic pin mounts in place of screws and make the base plate shorter so it only covers 2 holes in the Ikea Plasta enclosure. This design also uses rectangular magnets, with an additional overlapping frame…