118 modeli
I built this enclosure a year ago, but forgot to share it. I have recently received a few requests to share it so here it is! To get the Front Top Right bracket, just mirror the left one. I used 24"x24" plexiglass, but you can size that…
This is kinda a test at uploading, I have not printed this yet. I'll update this in a few days once i get my printer. I'll add additional connectors once I test this one. This is a corner for building a plexiglass or acrylic enclosure for…
This is a 2020 3 way corner brace. I made this brace specifically to eliminate the need to cut the corners off of Plexiglas when building Knickohr's 3d printer enclosure. The knockouts on the cube are where the glass would have hit if…
Plexiglass hinge v2 ( 2-3mm Plexiglass ) M3 30mm screw M3 nut or M3 30mm screw M3 threaded insert Updates: Add Part 2 with small tolerance for better movement Add Part 2 with tolerances and bigger width Add Part 1 for M3 threaded insert…
I'm living in France, and buying fancy stuff like rectangular magnets of a specific size and plexiglass of 3mm is nearly impossible and quite expensive. So I decided to create my proper enclosure, made of wood, melamine plated mdf and 4mm…
Hinges for 4mm acrylic plates, e.g. for 3D printer boxes. Only 2 metal screws are needed for mounting itself, all other parts are included. Please note the sides as the thread is only on one side at a time: LeftUp_RightLow = left side up…
I printed on 15% infill, 0.2 mm layer heights on an Ender 3 V2 and works great. Be careful when screwing in because in the past I've had issues with models splitting in 2. I designed this 90 degree corner bracket holder with slots for…
Simple hinge for plexiglass Top in 3 versions: 1mm 2mm 3mm Bottom in 2 versions: without screw with screw ( M3 20mm ) Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 10-20
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 12 cylindrical neodymium magnets, Ø8mmx3mm…
I've modified the original IKEA Lack joints to remove each plexiglass individually for printer maintenance. This is useful if you have couple printers stacked on top of each other and you need to do some maintenance for the bottom one.…
A A5 Plexiglass window (1,5mm thick) can be slid in as a window. How I Designed This https://cad.onshape.com/documents/fffc543bf24b6844ffa78476/w/180341e40870f55bcf48e4e3/e/7d8f8327e766ca58413accac Category: Decor
Remixed Prusa Enclosure parts for 2mm plexiglass It's hard to find 3mm plexi near where I live, so I remixed necessary parts for 2mm plexiglass (which is way cheaper too) Fitment is quite tight, my caliber measured 1.94mm. This might also…
0% infill 4 walls for a 0.4mm nozzle
My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Was asked to help with a solution for mounting 600mm high 4mm thick plexiglass screens to a desk. On Thingiverse someone used it to build a 3dprinter enclosure. Could not find anything on this website, so i made my own solution. Perhaps…
Mount for 2mm plexiglass. Plexi wedges into the clip and then use a screw to attach it to whatever Category: Household
(pour le français, voir plus bas) Plexiglass plate support for 3mm thickness. Just print 2 or 4 times, depending if you want use one or two plates. For each support you need: 3 washers 4.2x20mm 3 screws 4x24mm Plexiglass plate was too…
I also added holes for the one part that missed it.
I made some corner brackets for my plexi-glass NAS case. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 or better Infill: 15-25% Filament: 3D Solutions PLA Whatever You Want Notes: No…
I decided to build an enclosure out of plexiglass. All the 2.5mm brackets were incredibly small, wimpy and not very confidence inspiring. So I rolled my own. The height is to be adjusted depending on how long you need the bracket. I made…
The LACK V2 enclosure has fairly significant gaps between the legs and side / rear plexiglass panels. I couldn't find a good set of trim pieces to fill the gaps, so I designed slide-on skirts with a friction fit. Once installed, they can…
I turned my shelving unit into a 3D printer enclosure, which resulted in fairly large doors that would be far too flexible if made from plexiglass alone. Thus came the idea of using 4mm plexiglass sheets, framed on the top and bottom by…
had a problem with dust on my expedition shelf, and didn't like to screw or glue hinges and magnets inside. So I design this stand+holder for a 3mm Plexiglas to be used as door. I've used Plexiglas with dimensions of 33x33cm with a…
This is a small clip i used to mount some 2mm or .08" plexiglass. These worked great because drilling a hole close to the edge can be tricky. Designed to be used with #6 screws and washers. Print Settings Printer Brand: Creality Printer:…
2.5mm Plexiglass/glass/lexan Corner Retaining Clip, holes fit #8 wood screws.
A handle for using a piece of plexiglass or polycarbonate (or similar) as a sliding door. The slot is modeled to 0.08" to fit 1/16" sheet with a bit of clearance.
If you have a problem to find 3 mm plexiglass for Prusa MK3s Ikea Lack Enclosure, you might be able to get a 2.5 mm version - so here you have a remix of Prusa Enclosure parts for 2.5 mm plexiglass. Parts, which didn't need to be edited,…
Connector printed from ASA material in a quantity of 10 pieces. Printing time 2.5 hours. Fill 40-50%. Nozzle height 0.2mm.
I had a single handle that wasn't doing the job on my enclosure (made out of 3030 extrusion) and the acrylic sheet door/panel was starting to bend at the top and bottom. These are now mounted at both the top and bottom about 10 mm from…
Wall mount for a sheet with a thickness of 3mm (i.e. plexiglass or acrylic). No risk of cracking it when drilling holes as you can use the mount instead. There are 2 mounts, one for the sides of the sheet (embossed "S") and one for the…
This is a cover designed to be used with a plexiglass part well cut. There are multiple parts : The cover need to be printed with ASA. I suggest to print it reversed on a textured plate to get a look close from oem plastics of the 500.…
Size is 99mmx91mmx51mm The hole is 6mm
This is a model I made for my collection of Matchbox toy cars. It have a grove for plexiglass so the cars don't get dust. No supports needed i printed mine with PLA but everything should work. Do what you want with it and have fun!
Corner bracket allows face-mounting a horizontally-oriented hinge; e.g., a piano hinge.
The Window size should be the same as the bottom frame layer & should be able to hold it. Use petg for heat-resistance. I cut a hole in the wood a tiny bit smaller than the window, i measured the acrylic would fit in the frame of the 3d…
Enclosure corners for plexiglass mount. 2 woodscrews holes to attach on ikea lack (or custom made), 1 prepared M5 nut hole.
A friend needed a hinged holder for a 0.1" sheet of plexiglass. I decided to challenge myself to design a complete holder that could be printed all at once and without the need for supports. Print Settings Printer Brand: Monoprice…
I designed this magnetic clasp to originally work for the LACK enclosure compilation by Woody1978 although I suppose it could be used on anything really Using standard ~2mm plexiglass and M3x8mm socket cap screws the two halves perfectly…
Plexiglass (2mm) holder for display cabinet
I edited the back corners from the “Ender S1 Pro ENCLOSURE” by LWdesign (https://www.printables.com/model/509715-ender-3-s1-pro-enclosure-remix-ikea-lack-table), so you can use Plexiglass on the back instead of PVC. The Plexiglass has the…
Made this for my own use but feel free to modify it as you please. I used 4 perimeters and .40 nozzle and .20 layers with Prusament Galaxy Black PETG on a MK3S+.
Modified hinge for holding plexiglass with holes to securd (you can drill plexiglass). Also modified where the hinge will make a 90 degree angle with edge securing base of the hinge. Printed in PLA will print on Prusa Mini+ 15% infill is…
original model https://www.printables.com/it/model/488753-flsun-v400-enclosure-door
Instead of an enclosure, I ordered a plexiglass box with the exception of 1 face, to be used as a “cover” for my mk3s on an Ikea LACK table. However, I quickly realised I had trouble taking the box off without sliding it to the side - and…
Clips designed to hold 4mm thick plexiglass on ALU 2020 profiles I needed to polish some of edges to perfectly fit in alu2020 profile. Also used WD40 to move it along profile.
I saw the original infinitely adjustable picture frame and thought that I could make it work using some of the cardboard I had laying around. I modified the amount of space in the model so that it was wide enough to fit a piece of…
Stand for 5mm plexiglass sheets, also with model for small tpu or flex feets for better friction.
[EN] Clamp-Style Heavy-Duty Hinges I designed these hinges specifically for my 3D printer enclosure. I needed a solution that could support significant weight without requiring me to drill holes into the plexiglass panels. Key Features:…
rail sections for a sliding plexiglass door system. i printed this for the enclosure for my printer to be able to have access to the printers. I made the slot 7mm to accommodate 3mm plexiglass or PC sheets and have a little room to slide…
Simple corner brackets to mount a piece of acrylic sheet to the wall to use as a dry-erase board (whiteboard)
Knob for attaching to plexiglass door on my prusa print enclosure.
Brickheadz lego holder with Plexiglass 13x18cm (1mm). I think it works well with funko pop too. In the model there is a custom made lego base. Without the base, the legos would not stay in a stable position. To facilitate printing, the…
Support plexiglass pour bureau ou table d'une épaisseur de 22mm, pour un plexiglass de 02mm.
I attempted to make the holes for a 4MM bolt to self-thread. but failed so I'd change that if I were you. The holes are a little bit too wide for a 3MM (barely catches) and too tight for 4MM (won't start a thread)…I drilled mine out to…
Print the bottom portion with a higher infill for more success.
I remixed original handle to make the door for my corexy build. Fits for 2mm plexiglass and 2020 extrusion. Uses 3mm heatsets and 2x5mm magnets. No supports needed. The “magnet” part needs very short, about 6mm, countersunk M3 bolt and M3…
Inspired by @SierraGolf solution Kallax Display i decided to come up with a different version without screws and using TPU for the corners because i had problems with fitting other solutions. Parts needed for each window: plexiglass 333mm…
The hinge for the plexiglass door is mounted on a V-slot (recommended 40x20) and is fully adjustable along multiple axes. The hinge operates very smoothly. I used 6mm plexiglass for this project and 40x20 V-slots. The knob I used is this…
This is a pretty involved modification, so be warned beforehand! A video tutorial will be released soon - a link will be provided here in the description once its available! Tools Required: Power Drill 1/4 inch bit 1/8 inch bit (or…
I needed a way to mount orange acrylic to my laser cutter enclosure. The linear bracket would have worked, but I like the idea of having a corner for strength. Can be screwed in with 3mm screws or glued to the surface (like I did). If two…
They are templates to mark the holes on the plexigal panels inspired by the VZBot panels but if desired they can be used for other printers. they are made of: a corner marker with double screw a corner marker to a screw a marker for…
gcode file for prusa mini 0.25mm PETG (0.4 nozzle) included
Material : PLA (Prusa Galaxy Black, Extrudr hellfire red) Nozzeldiameter : 0.4 or 0.6 This Raspberry Pi 3+ case is designed for flexibility and functionality. It allows for the addition of a fan, which can be mounted directly to the top…
Hinge for thin plexiglass plate to protect your printer
All parts are designed to bend slightly past 90 degrees for more adjustability There are a few models, all are interchangeable and don't need supports to print - “plexi hinge" is the part that holds plexiglass panels with M3 bolts (in my…
plexiglass holder - wall mount. Fit to 2mm wide plexiglass
A bit of a different take on the plexiglas shelves. I wanted something that can stand on its own without any screws, bolts or using tools. I also decided to make it more decorated just for fun, using an art deco pattern I saw on some…
Plexiglass holder - fit to 5mm thick plexiglass
stand for plexiglass or glass 6mm
Bottom corners from Original Prusa i3 MK3 ENCLOSURE without slots for plexiglass: G-code for PLA
My partner runs a local charity that puts these pantries all over our county. I printed these to make it easy for the homeowners to put in new plexi or replace failed brackets.
A plexiglass sign from Death Stranding "Good Job BB" Suitable for edge lighting. This is a CNC project. I've included the fusion 360 files with toolpaths (for a Millright Power Route if you happen to have the exact same CNC machine as me…
Every collector of miniatures, scale models or LEGO kits knows that their hobby items attract dust like a magnet. Cleaning dust from miniatures becomes a tedious job, and probably the best way to avoid it is to protect your collection…
Update 2: So far I have installed skirts around the top of the 3 solid plexiglass sides, as well as from the bottom half way up all the legs. It seems to make a significant difference in the enclosure air temperature for PLA prints (with…
i build a enclosure with 4mm MAKROLON® for my creality ender 2. The corner holder are assambled IN the case to hold the plexiglass with m4 Srews. All holes are 4mm and have a 10.2mm embossing for neodym magnets I decided to make 2 sides…
This rounded clip holds Optix 0.09" plexiglass vertically, and is intended to be screwed to plywood. This is currently being used on an overhead HO scale model train track, to prevent derailments from becoming something truly horrific --…
Leg for glass, board, plexiglass with a thickness of 4mm and 6mm. There is space at the bottom for an anti-slip rubber.
This is a simple mount to add a 2mm thick backsplash, such as a piece of acrylic/plexiglass, to the Ikea Fjallbo laptop table. Uses a friction fit for the backsplash piece itself, and optionally has a 6mm hole to secure the backsplash…
This is for transparent sheet with 0.45mm thickness (actual measurement) The table is Galant from Ikea. Because I did'n want to ruin my table I put some silicone feet under the support to keep it “clipped” to the edge of the table Build…
for a hole in plexiglass oval shaped 80 x 10 mm
for a hole in plexiglass oval shaped 80 x 9 mm
Small part to improve the Plexiglas's hold. Plexiglass thickness 3mm Mounted in the middle on the feet and under the tabletop
Clip designed for 2mm thick plexiglass, 0.6mm thick computer case panel. Tolerance applied, no supports needed.
All the parts of the original model that hold or clamp on plexiglass panels have been edited to fit 2.5mm panels instead of 3mm.
this is for plates with a 2.5 mm thickness and extends them 8.5 cm I am working on a parametric modell
teste sa fonctionne pour moi pour aller avec : https://www.printables.com/model/488753-flsun-v400-enclosure-door
I designed this part to accompany a small drilled hole in a sheet of plexiglass. The model is fully parametric and can be adjusted quickly and for free by using the spreadsheet within the FreeCAD model file. By default it is designed to…
Acrylic Knife is a compact and ergonomic 3D-printable handle designed for cutting and scoring acrylic sheets using a standard acrylic cutting blade. The handle provides a comfortable grip and precise control when making straight scoring…
Clip to hold 2mm plexiglass to sides of Replicator 2/2X openings. Category: 3D Printer Accessories
Just a very simple adapters to create an enclosure in the lower part of havasta table, that I use for hold the laser engraver. 2.5mm plexiglas is ok but also 3mm would work great. size is 25x50cm if you want you can close all the space,…
DESCRIPTION: This is a quick and easy fix for the Prusa MINI LCD being exposed to potential damage. A small piece of plexiglass or acrylic can be used to cover the screen and prevent damage to the panel while keeping all the usability of…
Plexiglass holder fit for 10mm plexiglass
Added hinge only to the lid (since the base was already printed) and a latch, to attach a plexiglass/perspex protection for the fragile Kobo screen. All you need is a piece of 2mm thick plexiglass/perspex cut to dimmetion 15.5mm x 11.5mm…
Dies ist eine Halterung für einen Filtermatteneinsatz.
Clip to hold 2mm plexiglass to sides of Replicator 2/2X openings. Category: 3D Printer Accessories
The plexiglass scoring / cutting tool sold at Lowe's hardware store come with a small piece of cellophane to protect the blade. The blade is quite sharp this sheath will protect you from the blade and the blade from you. No infill is…
Pin to mount the Plexiglass platter to a Audio Innovations amplifier. Suitable for models 500, 700, 800, 1000, First & Second. Pin is designed from an original by my good friend HJ. ;-)
