Edge polisher for leather
Edge polisher for leather. Suitable for all leather thicknesses.
- Pobrania
- 370
- Polubienia
- 118
- Ocena
- 5
472 modeli
Edge polisher for leather. Suitable for all leather thicknesses.
I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.
Beverage Can Opener against Broken Nails A keychain tool for opening beverage cans preventing broken nails or nail polish. Key Features Anti-slip curved thumb rest for user comfort with dirty or wet fingers Easy tab lead-in enables a…
This design is a further development of my model 646358. Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a…
Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…
It is an enlarged and embossed version of the denarius believed to be the first minted in Poland, by Prince Mieszko I. It is worth noting that some historians attribute it to Mieszko II. How to print? Print it at a side, supports…
This is a sticker divider for the generic nail polish racks you can buy off Amazon, AliExpress and etc.
The Sieciech denar, dating from the end of the 11th century, was the first non-princely monetary issue in Poland. How to print Print at a side, with raft and supports.
I designed this rack to fish 48 holo nail polishes. It might fit other brands too but it wasn't tested. It is designed for bottles 28mm X 28mm. It is very sturdy and was designed to be "cat proof" as there has been an incident involving a…
Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
Nail polish organizer for my sweetheart 7 parts no supports no glue is needed
It's not a full 3d model but rather a 2.5 layered model. I think it can be useful tor 3D printing with color change. Also It should be possible to use it with some smoothing agent (i.e ABS and acetone or PVB with IPA) to get more shape…
I made this great nail polish and nails accessories organizer for my girlfriend. You can put foam inside the organizer and then cut the foam for each nail polish, so it won’t slide inside. I wanted the drawers to “stick" on each other, so…
Nail Polish Holder using the gridfinity system. Print Settings Printer Brand: Flashforge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.25mm Infill: 20% - 3D Infil Filament brand: Sunlu Filament material: PLA Extruder Temp:…
Organize nail polish bottles for storage. Printing: Enclosure fits onto bottom part. Used some superglue to keep them togother. Print Settings Printer Brand: Prusa Printer: Mini+ Rafts: No Supports: No Resolution: 200 Infill: Filament:…
Note: I wanted to create some modern-ish shoulder armor for cosplay and started with some Helldivers armor as base. As i progressed with prototyping i felt like it wasnt quite to my liking in how it looks, but still wanted to publish it…
Stand to organize and display nail polish. The organizer has recesses on the bottom for rubber feet if desired. Minimal fill needed just to bridge top 2 shelves. I used 10%. No supports needed.
A handy tray to store up to 24 bottles of nailpolish and a bottle of nailpolish remover. Design is made for nailpolish from the HEMA but also other brand will fit
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
Print it on its back. 10% infill and .20mm should do the trick. Nothing special here. This model was inspired by another product being sold. This was entirely created from scratch. My sister is starting her nail styling business and did…
All English and Polish letters as cookie cutters. Based on Aklatanic font (created by me over 20 years ago) with some changes for cookies rigidity. If you need letters for other languages let me know. Print tips: Place it flat on the bed,…
A series of appropriately sized devices to hold a neodymium magnet above your nail when applying magnetic nail polish. Magnets can be placed in one of 4 orientations for variations on the “cat eye” effect. These devices are designed to…
This is a swatch wheel to apply nail polish (preferably gel) to use as color examples. Has 25 nails to paint on.
automatic coin sorter for polish zloty!
Two dispensers for 90mm & 83mm polishing pads. Can be mounted on the wall with two screws if needed. Print instructions Need to print those with supports on the bottom. . Resolution : 0.3mm Perimeters : 3 Infill : 20%
better remixed version, no hangs or skips
Nie mogłem znaleźć żadnego modelu 3D breloka do kluczy z Orłem Białym, więc stworzyłem swój własny. Najlepiej użyć oczywiście białego filamentu. Couldn't find any 3D model of a Polish White Eagle keychain, so I created my own. It's…
Model needs to be mounted to the bucket, it is best to make 2 holes in the bucket where we mount 2 threaded rods and the model itself is mounted with cable ties to the previously mounted rods.
This is the sass emoji, aka “nail polish” or “nail care”, Apple-style. Give the gift of sass or permanently set the tone by displaying sass on your desk or shelf. Features interchangeable nails, which you can swap depending on your mood.…
Magnetic Nail Polish Bead Effect Tool is designed to create the "glass bead" effect with magnetic nail polish. I wanted a tool that didn't require winding a tiny crank, this makes it easier to use while your other hand might have wet…
Slightly modified original model for better ergonomics. Original model works great but my hand was getting sore during use. The curved portion is more comfortable for the the index finger and gives more control when polishing. Recommend…
This is an improvement on my old model which was much bulkier and more uncomfortable to use. I found my last model to be really nice for the first grit but my hand would start to ache after a while so i made this smaller, softer and…
Hold paint or nail polish or anything else that is about this same size. Print instructions 2 different sizes.
My daughter asked for a spinning nail polish organizer and this is what we came up with together. Everything is printable, including the bearing wheels and tires (if you can print TPU). I also included a TPU pad for underneath to save…
The original design is great but I didn't like the square design to hold the polisher. I initially made the rounded shape for my Krauss DB-5200 so it fits better. After trying it for my Krauss ShineMaster S15, which uses a more generic…
Pudełko na przyprawy z napisem "przyprawy" wykonane na drukarce Anycubic kobra 2 neo. Druk 4g15min. Wypełnienie 10%. Temp. 195/60. Różne wymiary z napisem lub bez, z przegródkami lub bez. Napis w wersji polskiej oraz angielskiej 3 pliki:…
Updates Decided to add the Updates at the top, so they are easiest to find for users that have already printed them, and are coming back for these. First of all, thanks everyone for the overwhelming support so far! A lot of you have…
I got annoyed having my nail polishes sticking up out of my boxes every which way and designed a shelf. It's pretty straightforward; you print on its side and can change the height which will change its width once you have it standing in…
Designed to prevent spills, this handy base will hold your OPI brand nail polish bottle at a slight (30°) angle for easier polish application. I don't wear much nail polish, but my wife says it works pretty well! 🤣 Printed in Hatchbox PETG
Should be very easy to print with standard .4 nozzle at .2 layer height.
Dimensions: L- 214mm, W- 66,38mm, H - 59mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the Discover. Create. FLEX collection. Visit the…
Generated STLs for additional names: Adam Agnieszka Aleksander Alicja Amelka Andrzej Ania Antek Bruno Elzbieta Ewa Franek Gosia Hania Hala Ignacy Igor Iza Janek Julia Kaja Kasia Krzysztof Kuba Laura Leon Maja Marcin Maria Marta Marysia…
3D Model of XCE & XFE Dimensions: L-214mm, W -87,36mm, H -74mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX machen and part of the Discover. Create.…
Magnetic Nail Polish Bead Effect Tool is designed to create the "glass bead" effect with magnetic nail polish. I wanted a tool that didn't require winding a tiny crank, and a smoother and quieter operation from my first model. I also…
Stand for 24 bottles of Holo Taco nail polish. 3 rows per 8 bottles. The row inner dimensions is width 28 mm, length 226mm. Fit for Holo Taco nail polish bottles, that I had available, is snug. There is 0.5mm tolerance. So the bottles are…
Print in PETG Scale to needed size 100% 150mm Space if your Pads 160mm you have to scale to 107% 85% 136mm ! all parts must be scaled equally so that you can put them together !
3D Model of Polish Bottle Wall Holder Dimensions: L- 236,99mm, W -95,60mm, H -71,99mm Support: Required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the…
3D Model of PXE Polisher Dimensions: L- 164mm, W -44,73mm, H - 59mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the Discover. Create.…
Simple nail polish organizer. Slot Size: 30mm x 30mm total slot - 36
Looking for a sleek solution to keep your daughter's nail polish collection organized? Discover my designed nail polish holder, perfectly sized for bottles with a diameter of 26mm or less. Ideal for keeping children's nail polish neatly…
Adjust Scale for your carpet thickness and bucket size. For my thin carpet and Lowes bucket 91% scale was prefect.
Krabička na 23 laků na nehty. K sestavení je potřeba 4 kusy šroubů M3x30. Ať slouží!
#gridfinity This model is part of my dremel caddy collection. This organizes everything that's commonly associated with buffing/ polishing work pieces with a dremel. I usually try to avoid anything larger then 1x1 gridfinity items but…
IMPORTANT: This model is now outdated, i have uploaded an improved design with comfort in mind. Instructions Attach usual sandpaper grits to print with tape/rubber bands. Lightly sand across each fret using progressively higher grits.…
Easy to make tumbler / polish machine. I looked at several designs and combined the best things into this design. e.g. easy to make with small amount of (printed) parts and adjustable for different sizes of barrels, pots, cans etc. Added…
I created this model to be able to store my DeWalt multitool on the wall. The tool hangs down from the mount so as to not put too much strain on the battery holder. This same mount can also be used for the following DeWalt tools: DCS355…
I needed a coaster for my desk at work, but after looking through what was available here, I thought a nod to my heritage would look cool. Definitely cooler with a mid-print color change. Measures 100mm x 100mm x 6mm.
I needed a compact way to store my nail polishes so I made this model based on a spice storage rack. I used command strips to attach it to my cabinet but it could be easily adapted to attach with screws by adding a few holes to the bottom…
Guys, now is the time that you prove your wife that the purchase of 3d printer was not the waste of money!!! Now you can make her this beautiful nail polish stand and proof her that you were right, and she was... less right! Y'all needed…
Dimensions: 210mm x 100mm and 236mm x 100mm This is a coin sorter for PLN - Polish zloty coins. There are coin stacks for the nine value of coins 5zł, 2 zł, 1zł, 50gr, 20gr, 10gr, 5gr, 2gr, 1gr.
In the fusion360 file you can specifie all the required paramters to your needs: how many compartments in y direction how many compartments in x direction size in y direction size in x direction z height first layer height wall thickness
I made a new rig because the other ones were too wide and would risk damaging the wood when polishing with a rotary tool or steel wool. Modelled after a fender strat, fender tele and a squier strat. I suggest printing these in PETG for…
After a lot of testing, tweaking, and community feedback, I’m proud to share my well-tuned OrcaSlicer profile for the FLSun V400. This profile has been a long time in the making, and the results truly speak for themselves – smooth walls,…
It's a bit funny, but when we made a coin from 1,000 years ago for the Museum we noticed that we didn't know what modern coins looked like either. That's how we came up with this illustration of a contemporary Polish 2 złote coin. This…
Having been commanded by my wife to organize the nail polish, I assessed the available options but found the designs to be neither simple nor functional enough. My goal is to display all nail polish bottles fully, avoiding them hiding…
needed a replacement nozzle for a foam polish spray as the can was dropped and original was broken. The design worked well so thought id share. it should work with any can with nozzle diameter of 4mm
Idea came after seeing @MWinkel 20kr Shopping Cart Key project . Thank you! Shopping cart key Poland edition: 1, 2 and 5 PLN. Just print them, attach to your keys to always have them with you, push the key straight into the carriage,…
Designed to hold magnets for the velvet nail polish effect. Holds magnets of dimensions 10mm wide, 8.5mm high (for VelvetMagnetHolderSm), and up to 60mm long. Magnets used in VelvetMagnetHolderSm, 3 stacks on either side:…
Hello everybody. Here is my first big project. Everything should be self-explanatory. The following are still required: arduino uno stepper motor Nema 17 stepper driver (some code from the Internet) 608zz ball bearings (the standard…
I didn't know how the fit would bit for the holders in the base, so the base cut out for each holder is scaled up to 102% making the hold for the holder slighter larger than the holder. This works well if the magnet alignment isn't quite…
I've been printing a lot of ABS on my Bambu X1C, and that leads to fairly frequent “clean your rods you filthy animal!” warning messages. Figuring there had to be a better way than trying to get all around the rods with my fingers, I went…
3D Model of Polish Pad Dryer for Pads 40 - 80mm Dimensions: L-137mm, W -135mm, H -56mm Support: Required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the…
Nail Polish Carousel Carousel for storing nail polish bottles, each carousel section holds 7 bottles and the top static section holds a further 3. Designed around the dimensions of an OPI brand bottle. Rotating segments are keyed - hex…
The Historical Chess Set Series #11 - Austrian Coffeehouse Chess Set We can trace the Polish influence on Austrian coffeehouse chess piece design back to the 18th and 19th centuries when the Habsburg Empire, which included Austria, had…
WARNING - The mechanical resistance of this device is unknown and unpredictable, since it depends on the kind of material, 3d printer and 3d printing parameters used. Always assume that this device can fail suddenly, and always evaluate…
Box for 36 nail polish bottles
Project: Reinforced Field Bunker – Żelbetowy Schron Polowy (1939) Scale: 1:72 Description: This model is a 1:72 scale representation of a Polish reinforced field bunker from 1939, known as “Żelbetowy Schron Polowy Nr 2”. It was part of…
Gridfinity storage for Proxxon grinding and polishing tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .3 Infill: 20% Filament: eSun PLA Category: Tool Holders & Boxes
Its known to hold: round bottles with 33.25mm diameter oval bottles with a major diameter of 35mm and a minor diameter of 21.5mm ‘squareish’ bottles of about 24mm I modeled it on bottles from Beetles, Imtiti, and Cheeka. It is modeled in…
A simple coin box :)
Watch band polishing vise. Mount your watch band within the vise to hold it in place while reworking it, polishing it or cleaning it. You need 1 M3 x 30 bolt, an M3 hex nut and an M3 Heat set insert to assemble. You can fit up to a 22mm…
This model holds up to 16 nail polish in one tray. Easy for compact storage of the Pink Gellac nail polish. Printed with 1mm tolerance between nail polish and the holder. Should print with support for overhanging parts. There is also a…
A modified version of Arkatz's design found here ! I removed the need for supports since I dislike the rough finish they tend to leave 😅 I tried to smooth out the model a bit as well, but it was a quick mod since I was desperate to get my…
I made this for my daughter when she wanted to build her own pretend nail polish shop so that she could have a small “collection” of nail polish without having to run to the store or break the bank :) Print the bottle right-side up and…
---Die deutsche Beschreibung gibt's wie immer unten--- I designed this box for my sister so that she can keep the nail polish bottles ( Jolifin Shellac ) for modeling nails all neatly in one place. You can sort as many bottles as you want…
Dimensions of the organizer : 237 x 80 x 32 mm Field dimensions : 77 x 32 x 30 mm
I have been using a Marineland powerhead with a drinking water bottle attached with the bottom cut off and filter floss inside as a water polisher after doing tank cleanings to get rid of the nastiness. I wanted something a bit more…
I made this cutout of a Polish white eagle mainly for my PC case to fill an empty space, but it turned out great and i figured I'd share with the community! I printed this in PLA on pretty standard settings. However, you may need to print…
This tool is intended to be used to polish/apply wax to cars with the help of a battery drill. The stem is 10mm (0,39 Inches), the primary disc diameter is ~70mm(2.76") , and with the extension disc its ~100mm (3.94"). Prints fine with…
This is a gridfinity 5x3 coin sorter for PLN - Polish zloty coins. There are coin stacks for the nine value of coins 5zł, 2 zł, 1zł, 50gr, 20gr, 10gr, 5gr, 2gr, 1gr.
I needed a nice set of stamps for clay. I couldn't find any so I made one, with a convinient storage box. It is a complete alphabet (upper and lower case letters) with Polish diacritics, numbers and some basic puntation marks. I added…
Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 Simple polishing plate for the drill... You will need an M8 hex bolt, a matching hex nut and self-adhesive hook tape. Print instructions Simple…
Giant Polished Gemstone with mount. The Gem is printable without support in Vase mode. I printed it with a 0,8 mm nozzle
This started as radical_rascal 's single-bottle polish holder (originally on Thingiverse ; reuploaded here ). I personally felt I could too easily knock over the single-bottle holder, but the multi-bottle holders were too crowded to…
For storage of 4 inch or 4-1/2 inch angle grinder discs in 5.5 inch tall (or taller) drawers. Printing: No supports needed. This can be printed in a wide variety of materials. Recommended Materials: DURAMIC 3D PLA Plus Revision Log: Rev0…
Voici ma révision de la polisseuse reittec, basée à partir des modèles suivant: Le modèle originale de reitter m: https://www.thingiverse.com/thing:3666116/ La révision en 170mm: https://www.thingiverse.com/thing:4076827 les roulements de…