Wyniki wyszukiwania: pos

Poseable Hand for Dummy 13 (200-500% scale)

Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…

Post-It Note Checklist Stencil

Made this stencil to create a checklist on a post-it (or sticky) note pad. The stencil surrounds the notepad to prevent it from sliding around, and can also be used as a base to go underneath for safe keeping.

Lightweight Poster Paper Backdrop

This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…

Sticky Note / Post-it Holder with Stencils

Model is made for 76 x 76 mm sticky notes. A multifunctional sticky note / Post-it holder designed for desk organization, note taking, and everyday planning. The holder stores standard adhesive sticky notes while also providing several…

(3MF) Poseable Articulated Robot Hand (sorted/scaled)

Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…

Dremel 3000 table saw with multi-purpose holder.

Dremel 3000 table saw. 2 main parts, the base where the Dremel is fixed in by means of a quick tension bracket and the table saw with accessories. In the design I have deliberately opted for an easy-to-stop bracket in which the Dremel is…

Multi-purpose keychain with screwdriver and integrated rule

This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…

Pentagonal Impossible Pyramid Passthrough Fidget

Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…

Hot Wheels Diecast 1:43 Scale 4-Post Car Lift Display (No glue)

This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…

Disposable Glue Mixing Pad

A disposable mixing pad with a small spatula designed for mixing epoxy glue, resin, or other adhesives. Quick to print and using only a few grams of filament, it’s perfect for fast workshop use without cleanup. Ideal for printing from…

Impossible Box.

This is a modification (remix) of the secret box I designed a long time ago. ======================================================== Update 2024-12-31 I modified the top slightly. I noticed that the force of the neodymium magnet can be…

Europe Game and Puzzle - educational and fun purpose

Here is my design of a Europe map. You can either use this as a game, a puzzle or for educational purposes. Note that this is the geographical Europe (not the political). You will find the country names on the back side. I used the…

Sharps Disposal Can for Utility and Hobby (X-Acto) Blades

This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…

Screwless IKEA LACK (Superposer des table Ikea Lack sans vises)

Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa. Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).

High-precision Compliant XY-Positioning Device

Hello, This is a compliant mechanism that can be used for percise positioning in two directions. The dimensions of the Compliant XY-Positioning Device are approx. 69 x 61 x 8 mm The range of motion in X is approx. 1 mm; the range of…

Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]

Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…

Easter Egg - Impossible Pass-Through

The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…

Santiago de Compostela Cathedral, Obradoiro Facade - Galicia, Spain

🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…

Impossible Pyramid Fidget

Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…

SNUFF-SPOON (For educative purpose)

🍴 Cutlery drainer/dryer/box - hanging possibility

Intro: i got inspiration at print from Maciey, but i needed different properties. so i have created my own model (Blender file attached) Characteristics: inner area: all edges rounded, including inner bottom corners ! → ✅ easy cleaning…

D.R.O.P.P.E.R. - PINDA Adjustment & Positioning Tool

D.R.O.P.P.E.R. Durable Rapid Object for Painless P.I.N.D.A. Easy Re-Positioning Simply drop your P.I.N.D.A. down onto this tool for the perfect (?) P.I.N.D.A. position. To be honest I don't know if it's the perfect P.I.N.D.A. position,…

Pikmin Pellets & Pellet Posy

Pellets from Pikmin (2001), file currently contains the 1 and 5 pellet designed for multi-material printing as well as the Pellet Posy leaves and stem as a separate model. Models can be easily scaled but the version in the file by default…

➖🔘 Round rod - modular handle system (with HIDEOUT possibility)

Info: decided to realize one more idea for furniture handles this time very simple design of round rods (they are printed standing) easily adjustable for any length between thread holes M4 threads on the bottom of each holder for…

SSD Adapter 3,5" to 2,5" for HP computers v2 (dual ssd / hdd possible)

The second version of my first hdd adapter model for HP computers. Allows you to combine with another design: two drives in one bay. Compatible with HP Elite 8000 - 8300 tower and small form factor computers.

Positive Polyhedral Dice Mold Remix

Remix of Positive Polyhedral Dice Mold by _Mari_Makes_ - Thingiverse Edited to make the top a funnel shape instead of flat and added a key onto one side so silicone mold can be reseated inside to be filled with resin (I like to let my…

F1 Pole Position Award Zandvoort 2021

My dear friends, after the impressive pole and win by Max Verstappen of the F1 Dutch GP I decided to create his Pole Position Award . I think it looks really good and I decided to share the gcode here exclusively on PrusaPrinters. So if…

Octopus with exposed brain

Here's a remix of the waving octopus model with an exposed brain. Change the filament after the layer at 45mm to have a different colour for the brain as pictured.

🧥 Parametric clothes hanger with folding hooks (multiple hooks on a rack possible)

Info + features: parametric source file (so you can create any length with any amount of hooks that fit your printing plate) it is on purpose NOT print-in-place , so anyone can have colored hooks just pick a rack and print required number…

Fixed Prusa MINI+ Printbed Camera Mount - Correct Hole Position

John's printbed mount is great, except that the screw hole isn't aligned correctly with the bed's bottom-right corner. I only included the modified bed mount and the original camera housing. For the ribbon chains and full instructions,…

Stanford 3D Scanning Repository Models

As a researcher in computer graphics with access to a 3D printer, it should only be a matter of time before these classical models finds their way onto your desk. Technically speaking, none of these models were created with the intention…

Feyd-Rautha Pose from Dune 2

Feyd-Rautha Pose from Dune 2 - Fix and Re-Sculpt. I will keep this in the free area. I am not 100% confident with the fix. The model itself from andrdudka is awesome as fan art, but it had multiple issues for printing. And I was blowing…

Pool Billard Position Marker

Printed with variable layer height. Standard Parameters.

📇 Card slots for z-axis-top (for i3 MK3(S+) - both left and right possibility

Info: original z-axis-top holder (right side) with: 2 SD cards holder slots given part is compatible with MK3, MK3S, MK3S+ no collision with Z-axis possibility for left and right side Print instructions: as recommended for original parts:…

Extended mini utility knive (10mm more blade exposed)

I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…

Posche 911 Safari Wall Art

Wall Art silhouette model of the Posche 911 Safari. Adjustable size. I accept model suggestions or ideas you might have

Daffy Duck Poster (Egyptian God Of Frustration Babylon 5)

Scale in almost any size you like and slice so that it starts in black then changes to white and then orenge then red. remix into a magnet or blow up to 30 inches high your choice. Display it somewhere prominently to make alien diplomats…

Hummingbird with exposed infill

This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Disposable PPE Glasses (not certified)

PLEASE NOTE this has not been certified and was simply to be used in the case of nothing else. If anyone can help certifying I would hugely appreciate this. With the current chaos I was busy printing loads of the Prusa covid face shields…

RC Car Body Post Compatible with DEERC 9206E

Got my son and RC car for christmas and he broke a body post so I measured another one and made this. Fits the DEERC 9206E from amazon.

Money Box or pencil cup Impossible passthrough - Single Extruder, Dual Color

Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…

Multi-purpose bowl

A multipurpose bowl with a diameter of 90mm and a height of 40mm. You can scale it as you wish. I printed at 30mm height x 90mm diameter and it was perfect. I prepared the impression to give it 3 passes of Flexible at the beginning to…

Fence post cover

Fence post cover for tube with inner diameter of 48 cm. Printed with ASA for long durability.

Fence Post 4x4 Topper Forth Try - Body Thickness .8mm

So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.

MMU3 UltiMulti - ELECOVER_BOTTOM with selector position description

Printed from PETG: Extruder #1 - Body - orange Extruder #2 - Numbers - black Extruder #3 - Windows - clear Enjoy!

Disposable Stirrer

Disposable stirrer for coffee, tea,...

Possessed Grand Piano

Possessed Grand Piano

woozoo fan bedpost shelf

I designed this shelf to support a round woozoo fan on a square bedpost (2.25" or 57mm). I was planning to print it flat on the bed up-side-down, but it has a 220mm diameter. To fit it on the 250x210mm Prusa bed, I had to print it at a…

Stand for Withings Body Cardio Scale and BODY+ (upright position)

Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…

Minimalist Dual Pen Post-It Holder

Layer Height 0.2mm. Perimeters 2. Infill 15%. No need for supports.

Wall holder for disposable rubber gloves

A wall mounted holder for disposable rubber gloves. Mounts with two screws in countersunk holes on the backside through the opening on the front. Printed in PLA, infill 30, brim and support everywhere. Gcode is provided.

Posed Zombie Hands

I made a Zombie Hand in a few different poses. Coming out of grave To place on the ground, to let people believe, that a zombie stretches its hand out of the ground Bowl Holder Place on the wall to let 2 Zombiehands Hold your Bowl with…

only fools and horses poster

the jolly boys outing poster 0.2 layer height only 2 colours yellow 3.40 black 3.40 - 4.40 15% infill

Box for disposable razor gillette venus 3

Box for disposable razor gillette venus 3

Caliper rack / Držák na posuvku / Šupleru

Practical wall stand for calipers. Quick and easy printing. PETG material used . Praktický nástěnný stojan na posuvná měřítka. Rychlý a snadný tisk. Použitý materiál PETG

Reposa antebrazos (Forearm rest)

Español: El diseño de esta pieza está pensado para poder dar un soporte adicional en los antebrazos a aquellas personas que por diferentes motivos no tengan la posibilidad de mantenerlos por sus propios medios cuando trabajan sobre una…

Karak - stojánek pro herní postavu

V rozšiřující sadě nebyl tento plastový stojánek přiložen, dílky nalezené na webu mi nevyhovovaly pro svou křehkost. Tento je vytvořen tak, aby se nemohl snadno zlomit. Čelisti mají lehké zoubky, figurka tak dobře drží, přičemž jde snadno…

Tactical Ballpoint Pen for Pilot G2 Refill with possibility of Metal Clip

This model is based on an normal version (2 wall layers) of a Tactical Ballpoint Pen https://www.printables.com/model/412788-tactical-ballpoint-pen. I adjusted it for use with Pilot G2 refill. I also added a small protrusion, to which you…

British post box inspired money box

This model is large in order for it to fit money in it at original size it is very large while printable at that size it can be printed at half scale (no smaller or larger coins such as the 50p wont fit). The attached model files are at…

Bike (Clip) Light Seatpost Mount

Bike Clip-light mount angled to point level from a seatpost. Lights that clip into a slot like this PrincetonTec snap into and out of place. This totally works with a medium/large o-ring, just like the model I remixed from. This is quick,…

Exposed Infill Pencil Holder

This cool pencil holder can be printed in any material! in the premade G-Code there is color change included like it can be seen in the pictures, and don't worry, you don't need any MMU to do the color change, simply switch the filament…

lamp post connector for 20mm dog hole

Connect a tomlemeo micro table lamp to a mft3 table or any other 20mm dog hole based table.

Simple Post-It Note (76x76mm) and pen holder

This is a simple holder for Post-It Notes (note size 76x76mm; a 50mm high block fits nicely in the holder). Two designs are provided: with/without pen holder Design: Tinkercad. Slicing/printing: Prusaslicer 2.7.4 and Prusa MK4, fw 6.0.2;…

Schablone für Briefdicke Deutsche Post

Die Schablone dient zum Test ob ein Brief maximal 0,5cm, 1cm oder 2cm dick ist. Deutsche Post restricts their letter sizes to a maximum thickness. With these templates one can check the maximum thickness allowed

Gridfinity X-Acto Knife Disposal

A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…

Fast Post Cap for Gate Fence

The cap from the gate post around the pool disappeared. This is a quick fix until a more intricate one can be designed. I wanted this to be as quick as possible so I changed all the speeds to at least 70mm/s. Thoughts?

Bilderrahmen für Postkarte von 15x15cm

Ich habe eine Reliefartige Postkarte bekommen, diese kann demnach nicht in einen standard Bilderrahmen. Also habe ich einen konstruiert. Die Postkarte ist zwischen den beiden Bauteilen vorgeshen. Da meine eine faltbare ist habe ich etwas…

Postbox sign: "Keine Werbung und Zeitungen"

Deutschen Schild für den Briefkasten, das darauf hinweist, dass keine Werbung oder Zeitungen eingeworfen werden sollen. Es hat 8 mm Bohrungen, in die gut 6 mm Schrauben zur Befestigung passen sollten. Kann in 2 Farben gedruckt werden,…

RC car post

RC car post height-59mm

compostable-sprouting-pot-press with ejector

It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…

Positive Grid Spark Mini Grill Cover

Meant as a base for custom cloth grills for the Spark Mini. Will also work just on their own. I prefer version 2 if you go that route.

Last Meter Disposable Paint Stirrer

A simple 3-bladed paint stirrer which uses common/cheap dowel rod for a shaft (friction fit). Perfect for using up the last few meters on a spool of filament. Fully reusable, but cheap enough to throw away [almost] guilt-free. Just drive…

The Impossible Gem Knob

Overview Looks like a gem, but then again, what gem could look like this? There are two stem length options depending on personal preference and both models are designed for use with standard #8-32 screws. I've also included the original…

"Our Triumph in Space" - Rocketship from a Soviet Propaganda Poster

Beginning a series of models of rocketships based on classic science fiction art from the mid-20th century, this is modeled on the somewhat absurd but classically simple rocket portrayed in this classic Soviet propaganda poster, which…

Arrma AR320357 Vorteks etc all Body Posts

This model is a replacement part for the Arrma Vorteks Body posts, includes Fusion 360 models and sliced gcode for CoreOne and Mk3S. AR320357

Rear or satellite speaker mounts for back of bed, with optimal angular positioning

Rear or Satellite Speaker Mounts with Optimal Angle Positioning Technical Design for Surround Sound Systems This advanced design offers a practical and efficient solution for mounting rear or satellite speakers in surround sound…

Razor Blade Dispender AND Disposal (Parametric)

Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) For the parametric file visit: Razor Blade Dispender AND Disposal (parametric) - Free 3D Print Model -…

Ford - poselství

Moudro pro všechny řidiče Fordů Vytvořeno jako můj první model v Fusion 360 Logo Ford využito v rámci public domain od @ToxicMaxi - Thanks a lot ! Tisknuto na Prusa MK3S+ Prusament PLA výška vrstvy 0.30 mm infill 20% podpory žádné

Handle for Composter Lid

This model is a handle for composter lid. It will perfectly pair with my other model: Composter Hinges . The handle is composed with two half shells glued together and 3 center pins ensure perfect alignment of both shells. Two attachment…

Mailbox Post Base

Decorative covering for the bottom of a mailbox post. This was designed to fit around a metal post that was designed to attach to a 4x4 buried in the ground. Pretty commonly found at Home Depot and Lowes. Serves 3 purposes: Adds a little…

buddy3d camera position for prusa xl - @*#%!$

I'm a new owner of the prusa buddy3d cam, seems to me like the ugliest printer camera on planet. So after having some trouble to get it running, because my wifi password was too long for this peace of hardware, I did not found a nice…

Bracket for mounting an LED UV light for screenprinting exposure

I bought an LED UV exposure light for exposing the emulsion on screenprinting screens. This Bracket adapted the light to mount on a mic stand, and it aims down to the screen with 24" spacing. I warmed the threaded end on the Mic Stand and…

Frigidaire 318242275 (Electrolux ICON ) Stovetop knob base & post strengthener

This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…

Olympos and Oikoumene Expansion Insert Organizer

PLA was used to print all the parts at 15% infill. PLA USED: Polymaker Marble White CC3D Gold 3DPrintingCanada Standard PLA: Red, Green, Black, Blue, Gray, Orange, Brown The Resources you see are listed below. I adjusted the sizes to the…

Parametric Gas Light Post Ladder Rest End Ball

This model was printed with PETG to withstand the outdoor weather. The ball has a 37mm diameter and fits a 19.5mm diameter cross bar. The Fusion 360 model is parametric that can be adjusted to accommodate other light post sizes.

Expose Yourself to Art sign

100x160mm sign, with text reading “Expose Yourself to Art” and image of a person opening their trench coat to a framed painting on a wall. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into…

Bicycle Tail Light for Stromer Seat Post

Stromer bikes use a special aluminum seat post adapter that has a beveled collar on the top edge (the last of the photo shows the original part). This beveled collar could also be used as a taillight. The idea came from one of the…

Držák postavičky (Character holder()

Držák postavičky pro hru obchod (Character Holder for Shop Game)

Positioning Fixture for Chuck Backplate

Fixture for milling flats on a backplate for a k11-100 chuck. Jig helps to position the backplate in the vise at to the corrrect angle. 2 x 2 flats are needed to hold the chuck in the vise or to mount it on a rotary table.

Spool Holder Position Lock for Universal Auto-Rewind Spool Holder

I made this position lock to hold the Universal Auto-Rewind Spool Holder. You can find the spool holder at https://www.printables.com/model/168-universal-auto-rewind-spool-holder-mm This will lets me open my lack enclosure without the…

Remix - Venn Diagram - Post Midterm 2026 Elections

The centre character has a slightly goofier expression and an awkward grin due to his disastrous loss in the Nov 3rd 2026, midterm elections.

A Posing Pug

Posing Pug Sculpture, (scalable if necessary). A little project I worked on, finalised in Blender, from a moment in time. Wanted to see how fine I could print with the Mk4S, its great using premium PLA, very impressed with the Mk4S! The…

Repurposed Yetix Mic Stand to Phone Stand

What: This print aims to reuse your discarded Yeti mic stand into a sleek phone stand for video calling and media consumption. It offers a tasteful yet subtle desk option. There are two versions in this repository. The first is mounted to…

Postcard / Autograph card / Photo stand

I needed an decent stand for my autograph cards, so I designed one. After I had designed and printed it, I realized that it could, of course, also be used for postcards or photos. There are two versions, one decent version, with only ~1mm…

Air filter lid for ABAC Poleposition B20

Its just a lid for the air filter of my ABAC Poleposition B20.

Tapo C100 Camera mount for 12mm square wooden post

This Tapo C100 Camera mount is designed to be fitted to a 12mm (or bigger) square wooden or aluminium vertical post. 4 holes for countersunk M2 screws are provided and the print was succesfully tested with Prusament Galaxy Black PLA on a…

Simplehuman compost caddy cabinet mount shim

The pocket of our cabinet is too small and made it so the compost caddy couldn't seat into the mount . This is a simple 5mm shim that sits behind the metal plate that is screwed into the cabinet to add more clearance to the mount.

reposoir pour flacon

reposoir en deux partie, support du flacon et cuvette interne libre pour récupérer le liquide en cas de fuite du flacon. 2 périmètres, 15 % de remplissage.

REPO Robot - Posable and Disposable

Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…