Liczymy pasujące modele…
Keep your cleaning supplies organized with this practical spray bottle holder. Perfect for storage rooms, cleaning cabinets, garden sheds, or workshops. Designed for easy wall mounting using two M6 screws, this holder secures most…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Da ich das Sprührohr meiner WD40-Dose verlegt habe, musste schnell ein neues her. Vorhandene Modelle habe ich ausprobiert, aber sie haben leider nicht gepasst. Das Sprührohr ist ca. 80mm lang und hat einen Innendurchmesser von 1,5mm, der…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⭐ UPDATE March 2026: I have decided to change the license to Attribution only, which now allows for Commercial use. Additionally many people have printed this with no supports without an issue. It's your call if you think your printer can…
Wydruk około 20,19 €–24,67 € nettoWstępna wycena jednego wariantu
Praying Mantis
Wydruk około 7,12 €–8,71 € nettoWstępna wycena jednego wariantu
Holder/s for WD40, 3DLac and other sprays. Inner diameter optimized for 65 or 53 mm sprays. 3mf and bgcode for 1 or 3 pieces. Any number of pieces can be made. It is also possible to achieve a different diameter by adjusting the scale.…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Perfect for holding you spray cans
Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu
You can remove the background and have only the text or scale it up or down
Wydruk około 8,33 €–10,18 € nettoWstępna wycena jednego wariantu
Version 1: Double-Sided Adhesive Mount This version is designed without a hole and is intended to be mounted using double-sided adhesive. It offers a clean and straightforward installation process without the need for drilling or…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Bracket for Gardena Comfort multi sprayer Variant for wall mounting or for Kemper Olpe frost-proof faucet tap. DE: Halterung für Gardena Comfort Multibrause. Variante für Wandbefestigung oder für Kemper Olpe Frostsicherer Wasserhahn…
Wydruk około 4,17 €–5,10 € nettoWstępna wycena jednego wariantu
Nepalese Prayer Wheel
Wydruk około 14,20 €–17,35 € nettoWstępna wycena jednego wariantu
Warning: use this spray box ONLY outdoor it has no fans and no filters! Easy and solid outdoor spraybox. You can put a cardboard/carton on the lower side to have a straight floor. You can also use the middle connector on the top side to…
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
Remix of Spray Can Handle Remix by @kleenecks . Print instructions: Material: PLA Layer: 0,2 mm Perimeters: 0,2 Infill: 15 % Supports: No Brim: No This model does not require any special settings, more details in the attached 3MF file.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 2 models: high quality and low poly. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
Wydruk około 11,62 €–14,21 € nettoWstępna wycena jednego wariantu
Printed with PETG. Please select support to “everywhere” in the slicer! Original rivet was replaced by a M4 screw. Mit PETG gedruckt. Stützen auf “Überall” im Slicer einstellen! Die originale Niete wurde durch eine M4 Schraube ersetzt.
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I took BoazJoe's design and sized it for my Round Up sprayer with a smaller neck.
Wydruk około 6,96 €–8,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protect against accidental discharge of your pepper spray. Safety First.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The side spray of our Moen faucet was leaking. I made this plug to replace where the side spray hose plugs in so that we could still use the faucet. I slipped the o-ring from the hose connector to this plug.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This is a simple companion plaque for my “A Soldier's Prayer - Hueforge Portrait” Created within PrusaSlicer. Print with a .2 layer initial layer and layer height. I recommend printing slowly using 1 perimeter at 100% infill for best…
Wydruk około 4,81 €–5,87 € nettoWstępna wycena jednego wariantu
Support pour nettoyant ménager etc Version courte inspirer du modèle de départ A imprimer sans support , le coté avec les trous vers le bas a viser ou coller au double face --------------------- Spray bottle holder / wall hanger to be…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
FOR COMMERCIAL USE: Check here Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean! Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its…
This is a remix of the awesome Joe's V4 spray handle , which is a remix of thefilamentcorner I removed the logo from the sides Print at a high infill % - I used 70% and its feels very solid. It fit all the spray cans I have laying around,…
I designed these spray paint can holders since every one I've seen is too blocky or doesn't work with all cans, so I made mine more organic and versatile. It fit most sizes (68mm in diameter or smaller cans). You can print for 4, 3 , 2 or…
A little rack for holding spray bottles in the garage. It's held to the wall with #8 screws. I printed it in PETG with no supports.
Another night in my motorcycle garage and again no space left on the workbench. After an ice cold drink (I am from Bavaria, so guess what it was) I analysed why there is no space and what things I can store somewhere else. The result was,…
Hi here you will find a garden irrigation system like the manufacturer gardena has. Free under the motto "Why buy, when you can print it" ;-) I have designed it modularly and as GlueEdition so that you can connect different ground…
I liked this handle, but the trigger is too long. I decided to make a shorter version to use only 1 or 2 fingers to pull it. This way it allows a better and more stable grip on the handle. You just need the "Trigger_Short.stl" file, the…
This is a remix of @MattGerman original design. Added a hanging feature and 10mm off set to create floating effect.
An improved version of the 3D printed spray paint can handle. Optimized specifically for Behr Premium spray paint cans, may be compatible with others. Similar to other improved versions, it uses screws to clamp onto the rim of the can,…
Spray bottle holder for the Honeycomb Storage Wall. Printed in PETG at 0.2mm layer height. Supports only for between the honeycomb inserts (see last picture).
2025-11-25 Before you print this please take a look at my new model. It as been redone from scratch to reduce the number of part and make the assembly much simpler…
This is a simple 75mm spray nozzle extension für WD40 or other aerosols ;) different shaft-diameters added (2,8mm / 3,0mm / 3,2mm / 3,4mm / 3,6mm) to fit more aerosol-cans (for WD40 3,0mm-version should fit)
I've designed a collar that tightens around the top of the spray can using a zip tie or M4 nut and bolt, this mounting system coupled with an internal groove allows the handle to be perfectly secured to the spray can, without the risk of…
The nozzle on the air freshener at work was missing so I did a quick design and print for a replacement one. It's not the most beautiful design, but it works well and I feel no reason at this time to make an improved version. I used…
Basilica Angel - Based on an antique Italian altarpiece, this angel sculpture will be the focal point of your spiritual garden or yard This mesh model on the base depicts an angel knelt down in prayer with some decent detail in the wings,…
Sizes: Small: 55 mm Medium: 62.5 mm Large: 70 mm Printing Parameters: Resolution: 0.2 mm No supports needed Only cut off the two struts Related Models: Skadis Storage Box Skadis Sanding Block Holder Skadis Basic Hooks Skadis Grinder Holder
This is a remake of something I found on Thingiverse. Unfortunately, I can't find it again to give that person credit. The original was slightly too big to print on an Ender 3. Since scaling will not work, I had to re-do this from the…
Using this, you can adjust the flow out of your garden hose from a soft mist up to a hard water jet. It also features some different conncector types so you can also fit your own hose adapter to it. If you cant find anything for your…
Here is my version of the hypospray prop from Star Trek: The Next Generation. It has a vial you can print in clear material that connects to the unit with 6x2mm magnets. Supports are not required unless you have trouble with overhangs on…
New spray BOX for airbrush (250x250x400mm). The printing took almost four days and it consumed about 1.5Kg of PETG filament 🙀. Two 120x120x38mm fans are used, 3100 rpm and 138 CFM air flow. 3x40cm LED strip (the middle one is switched on…
A very simple, but effective spray bottle holder that has since been improved for strength at the following link. https://www.printables.com/model/242706-spray-bottle-hanger-improved-for-strength No supports needed, just print, mount,…
This little guy started out as a lawn sculpture, and was blasted into the future by means of software (Trnio for iOS, Blender and PrusaSlicer) and magic (3D Printing). I used Trnio on my iPhone (in ARKit mode) to create the base model,…
choose between 3 top parts and 3 bottom parts mix them for the right size for your spray can. Top part : Ø53, Ø59, Ø66 bottom part 100mm, 120mm, 150mm,
Spray can holder for IKEA SKADIS board - fits most typical cans with ca 66 mm diameter, tight fit into the board, slightly reinforced Držák sprejů pro IKEA SKADIS desku - pasují do něj nejběžnější plechovky s průměrem 66mm Print…
Set of 2 cylindrical baskets for honeycomb wall. The baskets have walls that are formed by a hexagonal pattern. These baskets are attached to the HSW using hexagonal tabs. These inserts then fit very tightly (thanks to this they hold as…
Using the various pegs in any combination with the base plate, you can have this design hold almost any piece while you spray paint it. Best when used in combination with a turn table. The photo shows the Ironman mask faceplate mounted.
Internal diameter: 61mm (most cans have 58mm) Models: 9 cans: 3x3 6 cans: 3x2 4 cans: 2x2 Printing settings: Layer Height: 0.28mm Top layers: 5 Infill: 10% Material: PLA (210º) Slicing tolerance: Exclusive Ironing: enabled Printing time:…
Two simple spray paint stencils showcasing the Harley logo. .STL and .3MF format included. Also included the .F3D project file so that you can modify, remix and use as you see fit. This model is being made available under public domain.…
An attachment for @RostaP's Honeycomb Storage Wall system to hold spray cans and bottles. Uses @ddded's attachment library for the attachment plugs. This inserts directly into the storage wall without additional inserts. Some common sizes…
Camouflage Stencil Template for Spray / Airbrush / Painting Size 150x170x1 mm. You can resize it in the Slicer
Description Keep your cleaning spray bottles organized and easily accessible with this simple and practical 3D-printable Cabinet Door Spray Bottle Holder . I designed this model and printed the prototype using Bambu Lab ABS filament . The…
remix of Spray Can Holder 4 PegBoard to add hook to pegs : https://www.thingiverse.com/thing:3657721 Category: Organization
This is a remix of Corefile's No Logo version , which is a remix of Joe's V4 version , which was a remix of FilamentCorner's version. My only complaint about the original versions of this handle was the length of the trigger. I like to…
Use case This part fits very snuggly on a can of Dr. Wack chain lube spray for motorbike chains. I would guess that these cans are standardized, so chances are that the shield works for other brands a well. If not, scaling can be a way to…
small fine mist sprayer ∅8mm connector (with ½" adapter)
wall bracket for a spray gun This is a remix, I changed the recording that was too short for me in the original so that the top part could fall out if the holder was attached to a not completely flat surface, in addition, you can secure…
I liked the spray trigger gun, but noticed the author mentioned about how strong the trigger was due to splitting at the layer lines, and he referenced people stating it was failing due to this. I think it's cool it was print in place,…
Here are some simple stencils to print. They have a simple hook on the sides to keep their distance.
Spray Paint Cap Modifed the design from https://grabcad.com/library/spray-paint-cap-1 to have a wider hole that could be printed with a filament printer resolution. Category: Replacement Parts
The handle should now work for cans with smaller caps, such as this one. Have fun with it and please share your makes :)
Save your lungs. Stop the overspray! Everyone wants a spray booth but rarely buys one. They are expensive and take up a lot of room. Here is a quick solution that takes very little time, money or effort. It takes minutes to put up and…
If you think it might be fun to was the car or water the garden with a Star Trek type 2 phaser, this project is for you. It is built around an Orbit model 56516 "Pro Flo" garden hose nozzle, making it not only super fun but a legitimately…
This was originally designed as replacement spray nozzle for a Glade perfume can which has a 4mm shaft. I was pleasantly surprised at how well it worked, so I uploaded it. In addition to the STL for the Glade can, I've now also included…
Added in recesses for M4 nuts for easier assembly. Also modified the trigger holes to take M4 instead of M5. Added a small chamfer on one of the overhangs to slightly reduce needed support. Refer to the original thing for more details.…
Want fine water spray but can't print a fine nozzle? This is using centrifugal forces from a cyclone to nebulize water so it can be printed. I recommend using PET-G as there is some water pressure involved - please use caution! 8mm ∅…
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
Einfacher Wandhalter für 1-5 66mm Spraydosen. 12.06.22 - Adapter für 33mm Dosen hinzugefügt. Simple wall mount for 66mm aerosol cans. 06/12/22 - Added adapter for 33mm cans.
This is a spraybar attachment for an internal aquarium filter with an connection tube diameter of 16.5 mm. Three knee segments allow a flexible placement of the spraybar - but of course one could think of using straight segments of…
This is a simple model that will turn your fridges water dispenser into a super soaker. this device install quickly and is very discrete. The print will take about 5 minutes maximum on .1mm layer height this print will fit fridges with an…
This is a convenient paint shaker for spray cans. It consists of a hollow cylinder with an elongated hole at the bottom. There are two sizes availabe: 55mm (works for smaller cans like those from Edding) and 68mm (works for most other…
I printed this on a Prusa MK3S+, oriented so the side that goes against the wall is on the plate. I used PLA for these prints.
I wanted to have a little more ergonomic handle. I redraw the model froms crath using the model as reference. I also added a short trigger for one finger and later on a rubber band (just drill 2 holes in each pieces and use standard…
Simple shower head in various sizes and spray intensities Here I've developed a simple and inexpensive shower head. Please print with at least five wall lines to ensure it's watertight. If necessary, apply a layer of clear varnish to the…
Simple holder with multiboard inspired designs to cut down on plastic used. Uses 2 push fits on the back, which requires these snaps:…
I like the Ellrico spray holder (thanks). But I didn't want to screw it to the wall, I wanted to hang it on the skadis wall from Ikea. So I added two hooks and made the base plate a little bit thicker. Printed on the Ender 3 S1 Pro with…
Updated the original design to incorporate improvements based on real world use. Still no supports needed and basic print settings work just fine. There are numerous versions including "decorative" designs. I look forward to seeing other…
Replacement nozzle for expanding foam spray. With universal thread for all brands I have tried. .No supports needed. .Quick printing. .Minimal material consumption. -One-piece print.
Hey, its a Work in progress. will test it soon it is a cap for a spray bottle. but i want to mount a tube Update Added V2 Category: 3D Printing
A whole airbrush/spray paint booth for $3?! Yep! (well, mostly 😉) (somewhat of a WIP, will update with more images once my own build is complete!) I wanted a spray booth for working on tabletop gaming miniatures, but didn't want to spend…
Just a simple wall organizer for spray paint cans. Designed to have the highest angle while still allowing for clearance to screw holes with a drill and printing without supports.
Finally. A fun way to use your 3D LAC glue for printing plates. New, more detailed version of the Spray Gun with attachment for spray cans such as spray glue, 3D lacquer, colored paint, spray grease or other. Pulling the trigger activates…
The Universal Peg Board System is a mechanism for printing pegs and the useful part separately. This is a useful part that holds a spray can. It has a railing that keeps it from falling off during a mild earthquake (welcome to…
Spray Foam replacement nozzles so that you can re-use partially spent cans. Category: Parts
Spray can holder printed with supports, will hold standard size spray cans. (penetrating oil, starting fluid, brake cleaner etc...) There are cutouts on the back for 18mm x 1mm neodymium magnets to be super glued in and then should be…
Allows you to strap in a can of spray paint and attach to a reciprocating saw blade and install in a reciprocating saw such as a "Sawzall". You will need a hook and loop strap as well as #10 or 4mm bolts and a spare blade. Print Settings…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- DJMac made an amazing holder. I just closed the holes,…
Yet another spray can holder, but simple to print af screw up on a wall. Fits most common sizes og spray cans. Print without support and needs one screw per holder.
Dies ist meine Lackier Pyramide. Sie hat auf allen Seiten die Gleiche Maße, so ist es egal wie herum sie gerade auf dem Untergrund liegt und man kann sie “achtlos” hinwerfen um andere Objekte auf ihnen zu platzieren um zu Lackieren. Im…
I first printed this design in PETG with 5 walls and 40% infill and it held up great for about a month of moderate use every few days painting with several different cans of paint, the teeth sheared apart at the layers ultimately failed.…
Praying Angel Figurine – Serene and Elegant Bring a touch of peace and grace to your home with this beautifully detailed Praying Angel Figurine . Few supports are needed. I used organic-style supports, which peeled off cleanly with…
Bring peace, devotion, and timeless elegance into your home with this beautifully detailed Praying Virgin Mary Statue. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller…
Aquarium spraybar for a Fluval 07 series canister filter. I used it with my 207 filter on a 29 gallon aquarium and it produces a low current flow and provides good aeration if placed above water. Laminar flow from the spraybar reduces…
This is a remix that beefs up the whole model and changes where it attaches to the can so that no hardware is required for attachment. A groove is included to use a cable tie or twist tie to hold it extra tight. 2 cable ties are…
https://cad.onshape.com/documents/40d51bf297adf9ff085f1347/w/89f6cf7b46e7ffc898b86539/e/e9b1dbad4eb93cf131bb9408?renderMode=0&uiState=6371440cd2b56a532bb9f445
Simple surface mount spray can holder, for cans 67mm in diameter. fasten to surface with two #10 flat head screws
Drip/micro-spray splitter connecting to Gardena hose pipe. The requirement was to water bonsai trees, using micro-spray heads on flexible pipes, from a ten-way splitter connected to a hosepipe with Gardena fittings. The final design does…
![Spray Can Handle Knob [Remix]](https://media.printables.com/media/prints/860615/images/6613299_d6e7de9b-9150-48f9-8af3-bc510d21ad45_e4e00f5e-4803-43d1-84af-19e012ef39e4/img_20240428_173716193_hdr.jpg)
