Wyniki wyszukiwania: print

Sortowanie

43 027 modeli

P
Printablesvisle

HexScraper - Printbed scraper

I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…

Pobrania
257 646
Polubienia
37 673
Ocena
4,88
P
PrintablesHugo

Cascade card wallet (Print-in-place)

New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…

Pobrania
142 882
Polubienia
27 841
Ocena
4,68
P
PrintablesPrusa Research

i3 MK3S+ printable parts

All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…

Pobrania
125 427
Polubienia
5185
Ocena
4,95
P
PrintablesGabbox3D

Complete 3D Printer test all in one (stress test, bed level test, retraction test, calibration test, tolerance test, support test)

The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…

Pobrania
96 911
Polubienia
12 682
Ocena
4,89
P
PrintablesCherry Labs

Phone/Tablet Stand - Flat fold - Print in place!

This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…

Pobrania
59 639
Polubienia
8254
Ocena
4,81
P
PrintablesAndrei

Bag Clip (PRINT IN PLACE CAM)

TRAILER An elegant bag clip designed to be printed in place as one piece with minimal supports. Once printed, the clip is freed into 3 hinged components. The design uses a specially designed cam to give the user a mechanical advantage and…

Pobrania
54 538
Polubienia
8399
Ocena
4,8
P
Printablesrobotfriend

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

Pobrania
52 246
Polubienia
8823
Ocena
4,59
P
PrintablesSneaks

Bench Mountable 4-Jaw / 3-Jaw / 2-Jaw Vise with Swappable Jaws - 100% Printable!

Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…

Pobrania
51 801
Polubienia
22 450
Ocena
4,82
P
PrintablesNight Raid
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
49 199
Polubienia
12 528
Ocena
4,75
P
PrintablesLR3DUK

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Pobrania
48 017
Polubienia
19 526
Ocena
4,83
P
Printableskriswillcode

Print-in-Place Fidget Toggle Switch

Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…

Pobrania
47 227
Polubienia
5194
Ocena
4,69
P
PrintablesPrusa Research

MK4/MK3.9 printable parts

All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…

Pobrania
45 478
Polubienia
2669
Ocena
4,88
P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…

Pobrania
42 152
Polubienia
8919
Ocena
4,87
P
PrintablesLinkDesigns

RotaRings - Print in Place Rotating Fidget

I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…

Pobrania
41 645
Polubienia
4992
Ocena
4,85
P
PrintablesNeedItMakeIt

Rod Sloth - Fits Most 3D Printers - PRUSA - BAMBU - CREALITY

This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…

Pobrania
40 929
Polubienia
8958
Ocena
4,92
P
PrintablesPopandsicle

Christmas Tree Ornament Set (Vase Mode Prints)

A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…

Pobrania
39 379
Polubienia
10 633
Ocena
4,94

Collapsing Pirate Sword (Print In Place)

This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…

Pobrania
34 749
Polubienia
3510
Ocena
4,78
P
PrintablesMikolas Zuza

The Prusacaster - a 3D printable guitar

You'll find all the build instructions and links for components in the article: https://blog.prusa3d.com/the-prusacaster-how-to-design-and-3d-print-an-electric-guitar_71962/ Overview of the multiple pieces: Hardware Made to work perfectly…

Pobrania
33 945
Polubienia
9151
Ocena
4,91
P
PrintablesGrazWorks

Planetary Gear Fidget Toy (100% Print-In-Place)

I needed to model something in Creo as part of an additive manufacturing class. So I decided to blow everyone else's models out of the water with my fully print-in-place planetary gear toy. I spent a grand total of 4 days researching gear…

Pobrania
32 459
Polubienia
2698
Ocena
4,72
P
PrintablesMakkuro

Working Cannon (Print-In-Place)

This is a working cannon. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need or shoot paper balls, peas, etc. Print it as a toy for your kids, grandkids, or present it…

Pobrania
32 111
Polubienia
7280
Ocena
4,87
P
Printablescmh

Z offset calibration print

Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…

Pobrania
31 215
Polubienia
745
Ocena
5
P
Printables3D_Flexseeds

Flexi Leaf Dragon(Print-in-place)

[Update] ---2024/02/07--- Straight type is now available. ---2024/05/07--- Free 3mf file released!! If you want to make multiple prints, use various 3mf for Bambu and Prusa. ---2026/05/06--- Fixed an issue where the limb segments of the…

Pobrania
27 228
Polubienia
3284
Ocena
4,97

COLLAPSING DAGGER (PRINT IN PLACE)

This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Pobrania
24 945
Polubienia
4160
Ocena
4,68
P
PrintablesE3D

Spider's Web ~ A 3D Printer stress test

MODEL DETAILS This is a Halloween-themed model that is designed to stress test your 3D Printer. You won't need supports, but you will need excellent bridging! Keep an eye on this one as it's printing, there's lots that can go wrong 😉 If…

Pobrania
24 538
Polubienia
4364
Ocena
4,93
P
Printablescodewarriorr

Toothbrush Travel Case print in place

Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…

Pobrania
24 394
Polubienia
6504
Ocena
4,89
P
PrintablesHD_Creator

Miniature Vise 2.0 (much easier to assemble and 100% printable)

History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…

Pobrania
24 102
Polubienia
4212
Ocena
4,85
P
Printablesstevenmarx

How to print the Mandalorian helmet -> size S, M, L and 3D print settings

Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…

Pobrania
23 954
Polubienia
4219
Ocena
4,91
P
PrintablesNat

A *slightly* Overengineered Olpe Vase (print in vase mode!)

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

Pobrania
23 942
Polubienia
5722
Ocena
4,95

FlexiDinos Günther the flexi Stegosaurus print in place articulated dinosaur

Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…

Pobrania
23 486
Polubienia
4917
Ocena
4,97
P
PrintablesNakozen

Rocket Launcher Toy | Print-in-Place

This is Version II of the Rocket Launcher , with a much more reliable trigger mechanism which should stop any lockup for most people, and general smoothness of the action. Massive thank you to AKinferno for helping me with all the test…

Pobrania
23 392
Polubienia
5475
Ocena
4,79
P
PrintablesTinkrMakr

USB Cable Winder Stackable (+Knurled) Print in Place

Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…

Pobrania
23 290
Polubienia
4210
Ocena
4,44
P
Printablesneoyarus

Print-in-Place Bag Clip

I made a new version with a stronger hinge and parametric source files. Check it out! Origin story I needed a bag clip for my cat food but couldn't find one that would last more than a week. The problem was that the existing ones had some…

Pobrania
22 463
Polubienia
5902
Ocena
4,79
P
PrintablesPrusa Research

Prusa Spatula Printables - sample model

Author: Prusa Research (Vlado Turek)

Pobrania
22 450
Polubienia
2607
Ocena
4,91
P
PrintablesKagarov

Orbital. Structural printing. Print-In-Place lamp

Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…

Pobrania
22 303
Polubienia
6562
Ocena
4,91
P
Printablesprntmkr

Super Mini whistle! Only 5min print time!

Intro A super-mini but surprisingly loud whistle for your keyring! Print a few of them and give them to your friends as emergency whistle . ❤ Only 5min print time with Prusa MK4/MK4s or Core One (other printers maybe take longer time)…

Pobrania
22 102
Polubienia
3012
Ocena
4,8
P
PrintablesPrusa Research

XL printable parts

All printable parts for your Original Prusa XL . The parts are divided into folders based on subassemblies. Print instructions ATTENTION: Two materials (PETG and Polycarbonate) are recommended for the printable parts. Read the following…

Pobrania
21 307
Polubienia
1173
Ocena
4,94
P
PrintablesRygar1432

How To Print Glass

UPDATE: How to print Glass with ORCA .3mf by Rygar1432 | Download free STL model | Printables.com How to print GLASS! The first thing to understand is a very slow speed is necessary, so patience is a must. The key is three different…

Pobrania
17 027
Polubienia
13 816
Ocena
4,77

Wallet (V4) - print in place

Updated Version available (V5): https://www.printables.com/model/1034340-slim-wallet-v5-print-in-place ------------------------------------------------------------------------- A print-in-place slim wallet that offers space for 7 cards…

Pobrania
16 547
Polubienia
3636
Ocena
4,52
P
PrintablesPrusa Research

CORE One/+/Gen 2 printable parts

Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PETG, PC and PCCF (tested on Prusament) 15% Grid infill ** Note that print settings are recommended, but you…

Pobrania
16 213
Polubienia
1558
Ocena
4,9
P
PrintablesMordiev

Creality K1, K1c, K1 Max & K2 SE Door Hinges Geared Print in Place

Why you need this: This is a beautiful print in place set of hinges that will enable your door to open completely. The geared hinge is better design choice because the two pivot points can hug the chamfered frame with a tighter profile.…

Pobrania
15 946
Polubienia
1707
Ocena
4,77
P
PrintablesVC Design

Hinge Print In Place - Parametric

Print orientation: flat

Pobrania
15 940
Polubienia
2820
Ocena
4,84
P
PrintablesRossero

Collapsible Hand Fan (print in place)

This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…

Pobrania
15 847
Polubienia
4111
Ocena
4,37
P
PrintablesLR3DUK

Fast-Print Mobile/Cell Phone Stand (Vase Mode)

This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…

Pobrania
15 808
Polubienia
1451
Ocena
4,64
P
Printableskenny

Pop-Up Wallet (Print-in-Place)

A slim and compact wallet designed to hold five standard sized credit cards. Press the lever to have your cards presented to you in a convenient stacked order. The built in retention mechanism keeps your cards secure. Only 8.5mm thick!…

Pobrania
15 454
Polubienia
2895
Ocena
4,63
P
Printableswuguigui

Foldable Hanger - print all at once

Now you can buy a printed one at: https://trajann.com/collections/fandesign with special Black Friday discount code"BF25OFF" Updated20231109 Someone suggested designing a new one for the baby, so I made a new one, just scale the length,…

Pobrania
15 247
Polubienia
5387
Ocena
4,78
P
PrintablesGalactic Armory

X-Wing Vehicle Kit Card - 3D Print Files

Each file includes: - 1:60 scale model ship, assembled version .obj with .mtl color data - Bambu Studio 3MF with full color data for multi-color 3d printing - Full print settings are included in the 3MF file - Version with connecting…

Pobrania
14 631
Polubienia
3389
Ocena
4,75
P
PrintablesDelphant

Articulated Minecraft Creeper: Print-In-Place

Articulated Minecraft Creeper: Print-In-Place From the best-selling video game Minecraft. Print-In-Place and fully articulated. Optional face pieces included. Designed in Fusion 360. UPDATE 3/28/2024: Fixed model orientation. Made Head…

Pobrania
14 623
Polubienia
1806
Ocena
4,84
P
PrintablesVít Budina

Print in Place Suzuki Jimny

This Print-in-Place model of the famous Japanese offroader Suzuki Jimny is my second Print-in-Place vehicle with working suspension! The wheels spin too! The only thing you have to do after printing is to snip off a few tiny pillars that…

Pobrania
14 553
Polubienia
1611
Ocena
4,9
P
PrintablesPrusa Research

Basic Board + PSU Add-on Printable Parts

All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…

Pobrania
12 656
Polubienia
420
Ocena
4,88
P
PrintablesSASSy Design

Tradicional crystal - Pot and planter for plants and flowers - vase mode print

A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D

Pobrania
12 617
Polubienia
2940
Ocena
4,96
P
Printablesprntmkr

XXXS Whistle - small but loud - 4min print

Intro XXXS super-mini emergency whistle for your keyring! Only 32mm in size. Only 4min print time. SMALL but LOUD! Print a few of them and give them to your friends as emergency whistle. Why you'll love it? Very small - only 32mm Quick…

Pobrania
11 670
Polubienia
1325
Ocena
4,74
P
Printablessoozafone

Grabby the Claw - a quick calibration test for 3D printed action figures!

Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…

Pobrania
11 095
Polubienia
2415
Ocena
4,94

Drybox for Prusa Printer Enclosure V2 - without humidity sensor

This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…

Pobrania
10 924
Polubienia
983
Ocena
4,64
P
PrintablesGLeZz

3D Printed "Smart" Wallet (Updated for M3 Bolts)

/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version. =============================================== 9/2/22 Added VORON Edition top and bottom.…

Pobrania
10 838
Polubienia
2090
Ocena
4,67
P
PrintablesPrusa Research

i3 MK3 to MK3S+ Upgrade Printable parts

All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…

Pobrania
10 749
Polubienia
285
Ocena
4,85
P
PrintablesPrusa Research

MK3.5(S) printable parts

All printable parts for your Original Prusa MK3.5(S). MK3.5(S) upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK3.5 assembly manual Original…

Pobrania
10 158
Polubienia
385
Ocena
4,87
P
PrintablesNeybao

Gyro 7 Printable Jointed Cat

The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…

Pobrania
9892
Polubienia
3785
Ocena
4,82
P
PrintablesPrint-3D

Speed tower - test your maximum print speed

I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…

Pobrania
9776
Polubienia
477
Ocena
4,76
P
PrintablesGlennovitS 3D

Gridfinity Box (Quick print, lite version, less filament!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Pobrania
9726
Polubienia
1316
Ocena
4,97
P
PrintablesVít Budina

Print in Place Modular Truck - Base

This Print-in-Place truck is something more than it seems to be. The connectors on the back can hold one of many attachments, such as a Dump Bucket or Wood Transport extension with a crane, all of which can be downloaded from here:…

Pobrania
9664
Polubienia
1242
Ocena
4,96
P
PrintablesMetikumi

Stackable Storage Boxes Optimized for 3D Print

This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…

Pobrania
9633
Polubienia
2150
Ocena
4,93
P
PrintablesTmpx64

S-Hook - quick & easy print - last meters - functional - strong

Simple yet strong hook, perfect for hanging clothes, towels, bags, and more. The beveled edges are optimized for a great first-print result and to ensure they won’t damage fabrics. If you’d like to support my work, leaving a ♡ like ♥ or…

Pobrania
9108
Polubienia
586
Ocena
4,95
P
Printablesfifindr

Fidget Toggle Switch Clicker - Print in Place

Each variant is optimized with dedicated print profiles to suit different filament types: Basic filament for standard materials. (PLA Basic) Matte and silk filament to accommodate the increased friction of these materials, ensuring smooth…

Pobrania
8920
Polubienia
811
Ocena
4,35
P
PrintablesLayerCraft

Printbed Scraper

PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…

Pobrania
8834
Polubienia
1186
Ocena
4,75
P
PrintablesSHR3D.eu

Small tractor - flexi excavator (printed in one piece without supports)

Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…

Pobrania
8659
Polubienia
1547
Ocena
4,84
P
PrintablesProfessorBoots

3D Printed RC Forklift - DIY

Have you ever wanted to obtain the highest level of achievement known to man also known as being “Forklift Certified”? Well this RC forklift is meant to help make that dream a reality. This Mini-Fork is front wheel driven with rear wheel…

Pobrania
8484
Polubienia
1793
Ocena
5
P
PrintablesUnkown

Print-In-Place Beginners Dice Case

I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…

Pobrania
8172
Polubienia
3117
Ocena
4,74

Collapsing Broadsword (Print in Place)

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Pobrania
8072
Polubienia
1002
Ocena
4,85
P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Pobrania
7422
Polubienia
1358
Ocena
4,83
P
PrintablesJamesThePrinter

Chain Link Fidget (Print-In-Place)

Print-in-place chain link fidget toy - available in 4 sizes . Small (8 Links) - Ideal for one-handed use Medium (12 Links) - Good middle ground, useable in one or two hands (Recommended) Large (16 Links) - Great for use with two hands XL…

Pobrania
7268
Polubienia
1365
Ocena
4,83
P
Printableszcassell

Sliding Number Puzzles - (print in place 15 puzzle)

This is my 3D-printed version of the classic sliding 15 puzzle. I also included a smaller 3x3 8-piece puzzle along with a larger 5x5 24-piece puzzle. These are fully print in place, so the pieces all interlock straight off the printer.…

Pobrania
6779
Polubienia
803
Ocena
4,86
P

Nature's Helicopter - 2.5gm Maple Tree Seed Pod Quick Print

The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…

Pobrania
6599
Polubienia
1829
Ocena
4,66
P
Printableszuberio

Print-In-Place Folding Laptop Stand

Print-In-Place Folding/Expanding Laptop Stand that holds my 14" Dell Latitude 4500 Laptop at 45 degrees with zero issues. All interlocking parts are designed with 0.5mm gaps. Print instructions 0.4mm nozzle 0.2mm layer height 20% Infill 3…

Pobrania
6096
Polubienia
888
Ocena
4,75
P
PrintablesHellweaver666

KeyCrappie - The print your own Romley KeyCappie fidget toy clone (aka cute key cap guy)

I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…

Pobrania
6082
Polubienia
1146
Ocena
4,86
P
PrintablesMateusz Tokarz

Hex-Grip Bed Scraper – Print Removal Tool

🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…

Pobrania
6025
Polubienia
792
Ocena
4,81
P
PrintablesKasurai

Halloween Mini Monster Trap (100% 3D-Printed)

Halloween Mini Monster Trap >:D Print Recommendation: Material: PLA, PETG Infill: Grid Infill → claw holder (100%), all other parts (20%) Perimeters: 4 Perimeters Supports: No supports → With the exception of the plate! (Support on build…

Pobrania
6017
Polubienia
1895
Ocena
4,83
P
PrintablesDaniel Ryan

Fully 3D Printed Heat Set Press

*Update Nov 16, 2024: Many asked for a handle design with angled spokes like on a drill press, so I have now added a modified handle design (v4.2) that accepts threaded rods angled at 25 degrees. There are also threaded rods, and rod…

Pobrania
5748
Polubienia
1823
Ocena
4,55
P
Printableskaje

Slug - fully articulated Print-in-Place

As noted in the Summary, this is a print of a design by Isaiah Steckling from here: https://www.thingiverse.com/thing:4727448 The design is very clever, but it is difficult to print correctly as the clearances are very small. Essentially…

Pobrania
5664
Polubienia
621
Ocena
4,9
P
PrintablesEmkatech (Mike)

Modular Scraper for 3D Printer Bed Cleaning – compatible with Stanley Blades & printable blades

This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…

Pobrania
5494
Polubienia
1600
Ocena
4,83
P
Printables3D KIMBA

Pocket Tic Tac Toe: Fold & Play Anytime, Anywhere - Print in Place

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Pobrania
5474
Polubienia
1579
Ocena
4,87
P
PrintablesSneaks

Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware

Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…

Pobrania
5173
Polubienia
1032
Ocena
4,94
P
PrintablesMenke3D

Kickstarter & Autodesk collab 3D printer test

Since I love this test for calibrating new printers and couldn't find it on prusaprinters.org, I uploaded it here. Please note, this is not my work! Autodesk and Kickstarter have developed a common standard that enables people to assess…

Pobrania
5005
Polubienia
262
Ocena
4,95
P
Printablesrobotfriend

F23 ultralight glider Print in Place

A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…

Pobrania
4984
Polubienia
574
Ocena
4,8
P
PrintablesNight Raid
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
4937
Polubienia
1085
Ocena
4,88
P
PrintablesLoboCNC

Quick Print HexMaille

This is an update of my HexMaille fabric, with cleaned up edges and two different size options. Most 3D printed fabrics have a bajillion tiny vertical sections that are fragile and take forever to print. They also end up being kind of…

Pobrania
4771
Polubienia
1061
Ocena
4,9
P
PrintablesFlameKitty

Flexi Ankylosaurus - Print in Place

This is a really simple print. It requires no supports and it is print in place. This print takes about 3 hours to print. This model was designed and sculpted in Blender. It was my first time making something in Blender for 3d printing.

Pobrania
4755
Polubienia
1032
Ocena
4,8
P
Printablesneoyarus

Print-in-Place Bag Clip 2 (Parametric)

What's new Redesigned hinges that feel solid and last a lot longer Reduced gap between the arms when closed An easy to edit source file for all your customization needs The clicky latch is now standard How to print I recommend you use…

Pobrania
4736
Polubienia
718
Ocena
4,83

Prusa Printer Enclosure v2 – with MMU2S support - 0.125 inches acrylic version

**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…

Pobrania
4586
Polubienia
438
Ocena
4,74
P
PrintablesHawwwran

FlexiScraper - Sharp Printbed Scraper

ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…

Pobrania
4502
Polubienia
767
Ocena
4,77
P
PrintablesE3D

E3DBuggy ~ A 3D Printer stress test

MODEL DETAILS A golf buggy style 3D printer benchmark test. Based on E3D's onsite transport! Influenced by the design of the classic 3DBenchy, the E3DBuggy is a quick print designed for benchmarking your 3D printer. #E3DBuggy Post a make…

Pobrania
4482
Polubienia
753
Ocena
4,95
P
Printableskaje

Snap-Fit Joint Test Prints - Eight Versions

This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…

Pobrania
4046
Polubienia
197
Ocena
4,75
P
PrintablesBeef_Salad84

Small fully-printable modular Vermicomposter

Hello I made this model to promote sustainability and to prove that you can live more ecologically even in a small flat or without fancy equipment. It's a Vermicomposter/normal-composter printable on a Prusa i3 with a maximum size in…

Pobrania
4046
Polubienia
1753
Ocena
4,76
P
PrintablesL3V3C

HEXADIDG and HEXADIDG MINI - 3D printable didgeridoo

HEXADIDG - FULLY 3D PRINTABLE DIDGERIDOO DESIGN BY: L3V3C Have you ever wanted to try play didgeridoo? Well, you now can thanks to amazing new technology of 3D printing. With modern and usefull design focused on the superior shape of…

Pobrania
3908
Polubienia
932
Ocena
4,88
P
PrintablesART TOO

CENTER FINDER V2.0 - CENTER MARKING TOOL (Print In Place)

Easy to print - center and quarter markings 2 sizes 120 mm 150 mm I made somme adjustmets so the partial marking are now correct. I want to mention https://makerworld.com/en/@fmod for the clear explanation. You can also follow him on…

Pobrania
3818
Polubienia
1368
Ocena
4,71
P
PrintablesPhD3DP

Phone Stand Holder Seamless : print on side

A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES. More stands with various logo can be found in my other models, e.g.,…

Pobrania
3621
Polubienia
253
Ocena
4,94
P
PrintablesAnia Kompa

Fully 3D Printable Working Djembe Drum

Update: Added bolt-joined 7 inch shell with 3 different drumheads. For this variant you will need additional parts: 3x M3x10 bolts, 3x M3 nuts. I'm a drummer who decided to check out if there is a possibility to print any great sounding…

Pobrania
3583
Polubienia
1493
Ocena
4,97
P
PrintablesDehapro

SD Card Toaster Print In Place

Print in place SD card holder. https://www.youtube.com/watch?v=yyMM0uD7uX8 Support : No Raft : No Layer Height : 0.2mm

Pobrania
3561
Polubienia
643
Ocena
4,97
P
Printablestransformat

Sailboat Kit Card | Snap-Fit 3D-Printed Toy Boat

Catamaran Sailboat Kit Card Host a regatta in your pool or bathtub with this fast printing modular toy boat. 11 cm / 4,4 in long (scalable) Printing PETG recommended (for outdoor use) Printed in 1 h on my Bambu A1 / 0.6 nozzle / 0.4 layer…

Pobrania
3329
Polubienia
864
Ocena
5
P
PrintablesMaciek

Print-in-place handcuffs

Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…

Pobrania
3247
Polubienia
336
Ocena
4,89
P
PrintablesConr8r

Watering Bulbs - Printable in Vase Mode

These are watering “bulbs”. They can be filled with water and the spikes inserted into soil to keep it hydrated over a longer period of time. They are excellent for plants that need consistently moist soil and are quite easy to print.…

Pobrania
3194
Polubienia
792
Ocena
4,82