225 modeli
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
This is a guide for the Magnetic Printbed, so you don’t have the hassle of aligning the Printbed onto the Magnetic bed. Just put double sided tape on the two objekts and stick them in the back corners. Warning : Use heat resistant…
I remixed the HexScraper - Printbed scraper from visle to add a magnet so I could hang it from my X1 Carbon. The STL is designed for a tight fit using an 8mm x 3mm magnet but I have included a parameterized Fusion 360 file if you want to…
Simple hexagon printbed scraper with no sharp edges and it is only 20 min print. You can also hang it somewhere :)
Based on the original Ruiz Brothers project files, I've modified the blade so that it can be printed in 3 sections, and can be bolted together as per the original design - no glue required for the blade. I've included a HiltSupport file…
Just another printbed holder. It should be able to stand by itself, without any glue.
I needed a new scraper and thought the shape of Thor's Hammer would be fun to use for the design. This scraper is unique since it has 3 sides for scraping which was great for me. I had success printing with .20mm and 15% infill but you…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
I really like the Prusa spatula for its aesthetics and low filament consumption, but it could still be better. Enter the Prusa printbed scraper 2.0. I've reduced the material even more by cutting out triangular sections in the handle and…
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
The CIUNCARELLO Voronoi has a distinctive Voronoi design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…
CIUNCARELLO Voronoi boats a distinctive design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…
I wanted to store the Hex-Scraper on my Mini but it was to wide to fit without interfering with the filament hose. So I remixed this smaller version. The hook I used can be found here:…
Printbed scraper Printing instructions: 0,15 mm layer height 3 perimeters Recommended material: PETG
I could not find a scraper sporting a voronoi pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Printbed Scraper for scraping off 3-D model remains
THIS IS NOT A PRINT MODEL This model is intended to be set as a print bed model in Prusa Slicer. It does not include a texture. Category: 3D Printers
This is a remix of Jewelry Holder made especially for necklaces. Please do first appreciate and like the original model from the author of this stand ( @DanielSchenk_545468 ) then you can like my! I strongly recommend using the .3mf file…
A scraper to clean the print bed of your printer with a modular blade, so it can be replaced when washed off! Changelog V2 improves dove tail (non retro-compatible) and adds hexagon pattern on the joint. V1 first version with a dove tail…
Model has same height with orijinal bed spacer so you dont need to calibrate your bed again. You can use it in 3 corners if you want. Im using in 2 corners to easily align the Magnetic Printbed Note : Print it with at least PETG with…
My suggestion as a mechanical engeneer for a printbed scraper. Ergonomic position for the finger (fingerprint). Satisfactory grip size. Special slot for nailing. It prints in 1h 35m.
Printbed scraper Printing instructions: 0,15 mm layer height Recommended material: PETG
Hot bed spatula that does not scratch the surface. Espátula para cama caliente que no ralla la superficie.
This a remixed version of the PRINTBED_GUIDE for Elegoo Neptune 3 pro by user 'x'. x's version works well but clashes with Bobbylebob's scrap bin (https://www.printables.com/model/456408-elegoo-neptune-3-pro-scrap-bin). My model is a…
Feel free to remix it - scale or whatever you like. If you have special wishes, contact me and I do one for you :) Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds…
A raspberrypi camera printbed holder/mount for the Prusa Mini! Features: Fixable ball-joint for the camera (12mm M3 Screw). Friction-only designs kept getting loose. Easy installation to the Prusa Mini bed Optional cable-chain attachment…
These are two containers to place between kitchensink and wall for soap, brushes, sponges or whatever you want to put in. They are specialy made because my printbed (235x235) was to small for the other containers i found, so i just jumped…
malá ale zároveň robustní oboustranná škrabka, sklon 45 stupňů
Karambit špachtle Printbed scraper
Version 2: Added small nibs for both inner and outer rings. Grabs the cardboard even better. Also changed the curve design near the hub just for better looks. I've kept the original version for you to choose. Printed in PLA works just…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. Upgraded to fit almost any magnet lying around the house (16mm or smaller)…
I like printing with lots of colors, but I don't always want to buy whole 1kg spools, so I designed a spool holder/adapter to fit Printbed's mini spools so that I can use them in my AMS. I designed a solid version and a hex version, which…
I remixed the Closet to fit my Ender 3S1-Pro. It is still a tight print, but it works.
Holds 2 scrapers under 2mm thickness
Easy to print scraper with 2 pattern variations.
tactical Printbed scraper Category: Art Tools
Please add a photo in the comments when the model is printed. thank you ☺
John's printbed mount is great, except that the screw hole isn't aligned correctly with the bed's bottom-right corner. I only included the modified bed mount and the original camera housing. For the ribbon chains and full instructions,…
Griffstück für gekaufte Ersatzklingen für Kunststoffspachtel. Da ich meinen Spachtel immer verlegt habe, habe ich dieses Griffstück erstellt. Es passen die handelsüblichen plastik-klingen. Ich habe meinen hochkannt mit stützen gedruckt,…
Ergo Bed Scraper - the compact and quick-to-print tool for easy print removal! Ergo takes up minimal space as it can be stored by hanging it on the printer. With low filament usage and quick printing time, it's a must-have in your 3D…
UPDATE 1: made a new model from the scratch – it's super tight fit and hard to install but worth it Description : This is a shorter version of the original model:…
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
The only (as far as I know) zero-adhesive printbed guide designed specifically for the Elegoo Neptune 3 Pro. This will easily clip onto the back left corner behind the print bed. Very very easy to print (10 min) and install (30 sec), but…
This is a remix of the “Prusa Saptula Printables - sample model.” by Prusa Research. I added 4 changes to the original. Changes I made: 1. I added on the underside a pattern so the spatula can wipe the printer nozzle to pull off strings…
Print bed scraper with Anycubic label Designed entirely for PLA Total length: 6 cm Handle width: 1 cm Scraper length: 1.8 cm Rear hole diameter: 3 mm
The original file didn't fit on my ender 3 V2 but I didn't want to print it in two parts. There are still lots of details where the baseplate fits in the L-boxx so it would still fit snug. I will add a make or add a photo when it has…
Adapter to fit the Printbed spools i ordered
Upload auf Printables da nur auf Makerworld verfügbar. Es passen diverse Druckplatten aller Hersteller! Dekorativ und super schön! Gedruckt mit dem Flashforge AD5M in 0,2 layer , 04 nozzle und 20% infill. Orginal Modell by PrintManufaktur…
Simple mini printbed scraper with honeycomb pattern to take prints from printbed easily.
Printbed Scraper – a tool designed for safely removing 3D prints from the printer bed. Features a flat, thin edge for getting under prints without damaging the surface. Ideal for use with glass, PEI, or magnetic build plates
I pulled off the foil on the standard print bed and glued it to the GFK plate with 3M 468MP transfer adhesive foil. I sanded the GFK plate with 120k sandpaper and cleaned it with isopropanol.
A nice bed scraper for your printer
Found the 8mm magnet not to work at keeping the scraper attached during operation, bumped it up to a 10mm magnet, so far has moved at all during printing.
There is 6 diffrent models: (10 mm long scrape head) (15 mm long scrape head) (20 mm long scrape head) (25 mm long scrape head) (2 mm thin scrape head) (1 mm thin scrape head) Enjoy :)
This is a Remix of the 1/30 Outer Shoulder from BobC_3d optimized for printing diagonal on a 180x180mm printer like a Prusa Mini. https://www.thingiverse.com/thing:4340764 The original was a little to large for the printbed, so I decided…
i have a delta 3d printer with 180mm printbed that base model dont fit i split in two parts for easy print have the base and the hull of the tank Category: R/C Vehicles
About the Scrapers: The scrapers are very compact. The angle of the front wedge is 26.6° and is therefore quite robust. I recommend printing in low layer height to keep it strong. I printed it in PLA and it works perfect. 1mm layer, 25%…
I made this tool so that it is easier to remove your printed piece. The random design ensures fast print times. No supports are needed. Durable design. Fits comfortably in hand. Made it so you don't have to use a hobby knife or anything…
I really struggled to find anything easier and functional than over complicated and bulky solutions, so I ended designing this. This is not a final design so please if you notice any problem or you have suggestions on how to improve it…
ENG: Little scraper for your 3D printer. My gcode is multi-colored, but of course you can only print in one color.. I recommand printing it in PETG, but PLA should work just as fine. Enjoy. DEU: Kleiner Schaber für Ihren 3D-Drucker. Mein…
Designed for efficiency, this compact scraper is tailored for your 3D printing needs. With a robust front wedge angle of 26.7°, they offer stability during use. Crafted with precision, the scrapers ensure optimal performance in just 19…
O-Printbed Scraper Settings Material: PLA Layer height: 0.15 Perimeters: 3 Top Layer: 3+ Bottom Layer: 3+ Infill: 25%
Printable screaper for printbed
This is my version of an ergonomic printbed / build plate scraper. It is desigend to go easy on your fingertips even when pushing hard to loosen your model from the buildplate. The wedge has an angle of 20° and a smooth transition to the…
If you like printbed.com filament like i do and you have a bambu lab ams, this is for you. Fits the printbed spool nice and snug. I printed in petg with a .6 nozzle at .3 layer height.
A 2g, 10minute, 1 layer test to see how calibrated your printbed is. Layer-height: 0.2mm
UPDATE: 2023-01-31 I got tired of gluing in the adapter rings. I added flutes on the sides to ensure a tight grip. If it is too tight, you can scale the model down in your slicer. I also added a Core version that is the full with of the…
This is a printable spool to be used with PrintBed Filament. The spool is made in a way to insert into the spool core. I had tried to use just the adapter by philltran but found it to be way too tight to fit inside the spool and found…
This is a small pry bar for getting stubborn parts off the print bed. The hope is that the rounded fulcrum will ding my bed less than a sharp angled one would. Works best on parts with some kind of chamfer or lip at the bottom. I have a…
Sliced the model to fit the printbed of 18x18x18cm. Remember to print the pin horizontally on the bed, otherwise it will be too weak and snap easily.
really nice object. a friend printed it and it looks so awesome, i have to print one too. :-D
Small Printbed Cleaner for use with Cotton Pads . Prints flat without supports in PETG or PLA - easy and convenient way to clean buildplate. EDIT: Added a more convex version to make cotton pad stick out easier.
I added additional support for 10x6x2mm magnets in the legs. Now you can use either rectangular or round magnets. This is a modified design - @Jason_50683 , @DvG3DAtelier
Attachments to enlarge the size of a Printbed Mini spool to better fit in dryer boxes and other storage. If you plan on using these in a heated dryer box, use PETG, ABS, or another material more resistant to heat than PLA. PLA will warp…
no extra hardware needed
“Folgt mir gerne für viele neue interessante Deisgns und STL-Dateien” Ich war auf der Suche nach einem druckbaren Druckbettschaber. Leider ist mir so auf die schnelle kein Schaber ins Auge gefallen, der all meinen Anforderungen…
This scraper can be used to scrape 3D printed objects from the heatbed. Print material : I recomend using PLA Printingtime : ca. 2h Printer: Prusa mini+ HAPPY PRINTING :-)
Druckbett Schaber Anycubic Für die Fans des Anycubic habe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper Anycubic I designed a Scharber print bed for Anycubic fans. Have fun with it
I tried printing it in PLA and PETG. Both worked fine and i used them for quite a while and they have no damage yet. For layerheight i chose 0.15mm to get a sharp edge.
This provides an easy place to store a second print bed without needing to increase the footprint of your printer. I printed with PETG with 5% infill for the back legs and 10% for the front. If you're printing this for the MK3 you can…
Some printbed upgrades are causing the strain relief to be always higher than the build plate, this can be frustrating when the printhead (or else) collides with it on certain movements. So, I built my own strain relief with the same…
Simple mold to make silicone dampers for your heatbed instead of springs. I did use 2 component duplicate silicone (200°C safe), which did get off the mold really easy. 2 versions. One with printed pillars for the holes and one with holes…
Basic printbedscraper
*Image note: the pool is on a very uneven surface, so it looks less optimal, tho it still works as intended as you can see in the before and after images. On the before, sprays over the water. In the after, it stays contained. Pool hose /…
Bed Scraper | Printbed Scraper Meet your new favorite 3D printing accessory: the Bed Scraper. This is an essential tool designed for every maker who values a clean print bed and effortless print removal. Its sleek, purpose-built shape…
This Tool has a long wide handle for a comfortable grip and firm hold, in the center of the handle, a hexagon pattern is cut out to save on filament and add an extra esthetic to your tool shelf. The front has a nice sharp beveled edge to…
Print bed scraper with dedicated place for magnet 6mm x 3 mm. On the picture made of PLA 20% infill PL Skrobak do stołu drukarki 3D - w moim przypadku PRUSA MK3 Skrobak z miejscem na magnes - pasuje na wcisk magnes 6x3mm U mnie druk z PLA…
My 15-year old remixed a popular design of a face shield to maximize print bed use of his multiple printers. This is a NO GLUE, snap fit design. We have printed 100 plus and feedback from medical professionals is great and they stay…
I recommend to print it in ASA. If you have any suggestions to improve the model or correct something, let me know in the comments.
I designed this printbed scraper to provide a simple and effective tool for safely removing 3D prints from the build plate1. The model features a flat, wide blade and an ergonomic handle, making it easy to slide under prints without…
![Voronoi Printbed Scraper [2]](https://media.printables.com/media/prints/737744/images/5773832_b62f57bf-6e42-4f06-af0f-67f52c85ea62_ce7a15aa-4964-4e9a-b562-6ddfb82c2e02/img_1036.jpeg)
![Voronoi Printbed Scraper [1]](https://media.printables.com/media/prints/737707/images/5772672_ef8c4e62-fc12-4c5e-bcb5-0f7a36c450e2_6bd86078-9676-4171-8e9c-10e79ac52952/dsc01584.jpg)
