7077 modeli
This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu
This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board. It is compatible with all versions of Raspberry Pi 4. If desired, you can add : 4 screws (M2.5 x 5) to secure the board.…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
The housing fits under the display of the Ender 3 (Pro) and is screwed with the screws of the display. The housing offers space for a Raspberry Pi 4B, a 40mm fan and still offers space for cables and any accessories. Remix of:…
Wydruk około 15,90 €–19,44 € nettoWstępna wycena jednego wariantu
This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
This case is a simple case since it can be simply put together with brass standoffs. Moreover the design is flexible since if you need to design a case to fit on a pipe for example, all you would need to do is design a new “wallmount”
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Kann mit PLA oder PET gedruckt werden. Kein Support nötig. Schraubenlöcher für M3 Zylinderkopfschrauben. Beim Mini idealerweise Nutensteine im 3030 Profil.
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mount for the Raspberry Pi Camera to fit with a nice IKEA Stuva mount I found on thingiverse. Please note that only the part that holds the Pi camera is included. Donload the additional parts from the original creator on…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Items needed: Raspberry Pi 3 or 4 Raspberry Pi 7" Touchscreen HiFiBerry DAC2 Pro XLR Some plastic threading screws or you could add threaded inserts whatever you prefer. Easily adaptable for other DACs by modifying the connection box.…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Raspberry Pi 4 Case remix. Original from marchingknight11
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Hinged Box for Raspberry Pi Pico Robotic Board made by kitronik I ma building my own animatronic and needed a solution to not only store my pico and board, but ensure its still usable I have put together a sturdy case with the…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Breakout Board https://amzn.eu/d/1lihfyZ
Wydruk około 2,17 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
a Raspberry Pi4 "heatsink" case is smaller than most cases, and existing Mk2/Mk3 mounts were a bit to large. so I've made this smaller one. If you add a little strip of rubber foam in the bottom it will be a tight fit
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SleepHQ I took the design and remixed it by adding the SleepHQ logo instead of the Raspberry Pi logo. Printing tips: The included code is for a Mk3S+ with a .25mm nozzle. The tighter your printer is calibrated, the better. The model was…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
I made this plate to stack my Raspberry Pi zeros and zero 2s. The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html Prints without Support. Recommend 3 perimeters and 20% infill. Only needs two M3 Screws and nuts to mount to the…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case is ONLY for raspberry versions with tower and NOT interlocking so don't print it if you don't have a tower because the holes and alignments are custom made. That said for those who want to print it get in addition to the files…
Wydruk około 2,25 €–2,74 € nettoWstępna wycena jednego wariantu
I wanted to add a BMEx80 to a RaspberryPi Zero and have it displayed in my house. The great model from adafruit was doing part of this so I modified it so I can attach the sensor.
Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu
Parts needed Raspberry Pi 3B+ IQAudio DAC Pro Official RaspberryPi Touchscreen 7" (Version 1) Rotary encoder KY-040 (axle diameter: 6mm) 4x Hexagon socket head cap screws M2x5 mm 2x Heatset inserts M2x4x3.2 mm (for both sides of the inner…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dimensions: 105 mm x 100 mm x 46 mm Parts Included: Raspberry board cover Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…
Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu
⚠ Requires the: Mainframe z17 Modular Case (Free) or Mainframe z16 Modular Case (Free) for full functionality 🔌 Raspberry Pi 5 Extension for the Mainframe z16 and z17 Modular Case This extension pack is designed to make the Mainframe…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
This case is for the Raspberry Pi 5. At the rear end you can easily use the power button and view the led indicator. At the bottom you can fit M2.5 nuts and use M2.5 bolts to secure the board. There is a version with air-vents in case you…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns. The cover with the hexagonal pattern can be dual color, if you use the add color change feature, in PrusaSlicer . The covers are snap fit.…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
This is a pretty tight fit and snaps in place nicely. The case was designed with the official active cooler in mind; there is an intake vent for the fan, exhaust vents at the back and some more vents above the radiator to help with heat…
Print or use to make new things
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
NEW Updated version here: Raspberry Pi 4 Case U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu…
Print or use for making other models
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…
A RaspBerry Pi 4 case designed to optimize the airflow around the board and to keep it well cooled without the need of a cooling fan. From the hestetical point of view, it is recommended White PLA, but it can be printed in any color you…
Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…
Its the best i could model it, diamensions based on the chips and parts built into the new 5, board based on the old 4
A basic model of a Raspberry Pi Zero 2 W designed to be 3D printed or added to your CAD Model to confirm dimensions and placement of features. Amazon link to purchase a Raspberry Pi Zero 2 W once you have confirmed all of your dimensions.
U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu Components link for all fixing listed above.…
2025-06-07 - Added case file with no logo Remodelled raspberry pi 4 case from microcenter.com and updated by my liking. More ventilation micro SD card adapter slot Cutout for LEDs Tighter tolerances for tighter fit. Print instructions…
A simple 2 parts snap-fit case for Raspberry Pi Pico. No screws needed. Back of case is open for wires. I use it to connect 2 ADXL345 and do the input shaper in Klipper Print settings: layer: 0.16 or lower perimeters: 3 To connect 2 ADXLs…
U will need: Case - M2.5x10 self tapping screws X8 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 No supports are needed for this design. Red faces can be…
A remix of Sneaks excellent ‘Articulating Raspberry Pi Camera Mount’ -camera housing to suit the new v3 Raspberry Pi camera. The V3 camera has a much bigger sensor and comes with autofocus- quite a big upgrade from the V2 camera. However,…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
Update 08/02/2023 - I have added a ‘Wide Angle Camera’ version, the lens has a larger diameter than the standard so will need to be taken into consideration on some designs. I don't have a physical v3 wide camera, and have just gone off…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…
Raspberry Pi Pico Case. Two versions, one with the pins facing up and one with the pins facing down (pictures only show pins facing up version right now). Make sure you download the correct files because the different versions are not…
2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
Thanks for checking out my work. If you like what I'm doing please give it a like and consider buying me a coffee ! For those in Australia without access to a 3D printer you can order the full 3D printed parts set from me here. Retro…
One more case for Raspberry Pi Zero. This is simple, compact and quite rigid. The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and…
U will need: Case - M2.5x10 self tapping screws X7 Pi - M2.5x6-8 self tapping screws X4 Mounting to 3060 extrusion (30mm spacing) - M5x10 BHCS or SHCS X2 No supports are needed for this design. Red faces can be removed for wire/ribbon…
A quick printing case for the Raspberry Pi Zero 2 W The Zero 2 W is a great little workhorse but who wants a bare board sitting around? Cover it up with this minimal case. This case is primarily printed flat with fold lines designed in…
Raspberry Pi Case with voronoi snap fit lid printed with Geetech 30T
A sleek, functional enclosure designed for the Raspberry Pi 3 Model B / 3B+ . High-performance cooling meets a minimalist, screwless design. ✨ Highlights Toolless Assembly: Precision snap-fit mechanism. No screws needed. Active Cooling:…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This stand is loosely based on some other simplistic designs I've seen for the original Touch Display, but it is based on the new dimensions of the Touch Display 2. It is a simple leg design that you print twice, and it has a cutout in…
Greetings, fellow enthusiasts! I'm thrilled to share this 3D printed Raspberry Pi NAS project with you. I hope you find it not only enjoyable but also adaptable to your unique requirements. I am always eager to receive feedback to enhance…
I really like pyrho's snap fit case, but my NVMe HAT wouldn't fit, so I decided to remix it. I remixed the original model to fit the 52pi N04 M.2 2280 PCIe To NVMe HAT specifically, but other HATs can fit in the case fine as long as you…
A case for the Pi Pico, Pico W, Pico 2, Pico 2 W. Supports soldered headers but does not support the official Pico 2 WH (see below for alternatives). Snaps together. Allows the BOOTSEL button to be pressed. Useful when the Pico needs to…
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…
Printsettings: Layerhight: 0.2mm No Support Needed No Screws needed. New: New lids and cases for various uses. All variants can be combined with each other.
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
TLDR Raspberry pi camera mount for the voron 0 / voron 0.1 Get up close and personal with the nozzle & the print bed (>80% visible) Easy mounting with 1 M3x16 screw, 1 M3 nut and 1 M2x6 screws NO PRELOADING OF NUTS thank goodness! No…
This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is covering the screw holes. Use care when adding the lid…
The ICECASE SLIM Pi 5 is a cutting-edge slim case tailored for the Raspberry Pi 5, housing a premium Noctua 4010 5V fan. This sleek enclosure ensures optimal cooling efficiency and sleek aesthetics, without loosing the functionality of…
This is a nice sturdy case for the Raspberry Pi 4 Model B that has all the features I wanted to see: Pi drops easily into place, then is secured with M2.5 self-tapping screws. Top clips on securely, but is easy to remove. Vent holes for…
Fractal Design uploaded the files for their model on their website : https://www.fractal-design.com/north-pi-3d-files/ This is my take on the Fractal baby north. EDIT 3 of August 2024 Added a BBT pi 2 version (for the tray & foot use the…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
