876 modeli
Additional parts: Threaded inserts (M3x4mm) and 20mm spacer between Orbiter Extruder / Toolboard mount required. CAN-FD on Duet3D boards rulez ;) Printable in ABS. Use at your own risk. Please give me some feedback and post your make as a…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
Simple revo mount for ratrig toolhead V1 that use Rapido, use 2 M3x8 screw. This is a mod of the original Ratrig files. Use the step in the files section to modify.
Wydruk około 1,32 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
I have tried a few other T slot covers that I have found on here but non of them were satisfactory. So I drew one from scratch. This one is designed to flex in the middle, something none of the other ones could do. It will be a tight fit…
The FAN RETURN can be used with or without the following HEPA filter cartridge. https://a.co/d/hSXwPuz The HEPA filters main purpose is for noise attenuation. Use the “FILTER_BLANK” if not using the filter or use…
This file basically adds 100% speed every 5MM of height up to %1200 using M220 gcode command, Add sufficient brim to hold the model in place and set the external wall speed to something reasonable like 30mm/s. and print in vase mode The…
*Version 2 Step file of the Base added to the files. *mounts added for PRO 1.1/1.2 plus Octopus. Some parts currently require supports. Uses M4x8x.5.5 Heat-set inserts.
*ADDED Z-AXIS DRAG-CHAIN MOUNTS. To fit a Drag-chain to the Z axis with the Belted Z you will need: MOTOR_MOUNT_Z_CHAIN_V1.1, Z_LOWER_MOUNT (V1) v1 BELTED_Z_BELT_NUT_MAIN_V1.1 BELTED_Z_BELT_NUT_CAP_2X_V1.1 ZX JUNCTION (V2) X MOTOR CAGE…
11.03.2022 - Updated positions of bores for both endcaps/ turned powerswitch (V2) This brackets fits to Meanwell UHP-350-24V power supply in combination with Ratrig V-Minion 3D Printer.
About This is a tool changer modification for the RatRig VCore 3 printer that utilises an E3D style coupling. Belts This modifications is designed with the intention of being used on an VCore 3 with the so called “OpenFront” modifications…
Latest V-Minion build featuring my current Mods including: Belted Z V2 (Beta.. with or without M5 Heatset Inserts) XY Drag-Chain assembly V2 Y Drag-Chain V2 Electronics enclosure EVA 3.0 FBS (narrow) mod Variations of all these can be…
These mounts use heatset inserts and M3x6_FHCS, longer M3x12_SHCS x2 are needed to mount to the bed plate. IGUS model: 0_62m_E2_10_10_018_0___E2_100_10_12PZ_A1_4 v2 12links. 3 hole open-back Drag-chain: Updated Y Axis Drag-chain mounts to…
Update 11.08.2026: Added EBB36 Gen2 toolboard mount for the LGX Lite v2 and Moschito Magnum+ Liquid spacer Update 29.07.2026: Added 19 ID hose duct for the EBB42 Gen2 / Sherpa Mini combo Update 11.07.2026: Added OS2 toolboard mount for…
This is a bed corner piece that acts as a stopper to slide your spring steel sheets against. When assembling my V-Core 3 I instantly noticed that it would be almost impossible to properly place the steel sheet on the magnet as there is…
Attention: Your printer needs to be calibrated correctly in order to print accurate! Only 0.05mm offset to the components. 31.01.2022 - Added Leadscrew jig, might need some more testing! RatRig V-Minion alignment tools In order to fit the…
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
This version keeps the clips on the guid at all times. They hinge down and snap into place making work with them a lot faster especially when you need a third hand. Update. My first prints of this all the parts fit nicely. I am adding…
cleaned up the files to be used on cnc-mill ore cnc-cutter
EVA3 cable_guide and the Ratrig V-Core 3.1 electronics_wire_guide_rear is modded to take 1.75mm bowden tube to act as a wireloom support. Initial idea was seen on TeachingTech's Ratrig V-core3 video.
Quick remix of https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount and https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig to fit the iec-adapter I had ordered. I added…
RatRig wire guide that doubles as a mount for 35mm DIN rail. Uses a slotted hole like the original wire guide so the t-nut doesn't drop into the extrusion. Added chamfered ends for additional wire routing and a curved base with a slotted…
This is an upgrade to my previous mod to eliminate the aluminium extrusion from the x-gantry. You can run with just a single rail or with 2 rails screwed together by aluminium blocks. A single rail can save a lot of weight, while also…
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
Scharnier Tür RatRig V-Core 270° - Hinge Das Scharnier passt an die “originale” Tür vom RatRig V-Core 3.1. Dort sind sonst rechts und links Griffe und Magneten zum halten. Aber erstens hat man somit nie eine Hand frei und weiß auch immer…
This is just an enhancement to the wonderful wire guide provided in the newest rendition of the Ratrig. I added 5mm of height to them for additional room for wires. I just added some more variations. One with a wider and also taller size…
BOM: 2 cap head screw m6x12 2 t-nut drop in M6 1 brace_RR If you want to support my work, buy me a coffee thanks to Simon Vez, i took a cue from his model…
11.3.2023: Backplate fixed, small collision was there. Design is prepared for: MGN09H linear rail Rapido HF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file included. Design is prepared for V-Core…
Made this mod for the blower as i didn't like the height of the original when first assembling my VC3. Been using and testing my original test model for several months now and has been working well so decided to finally share. This model…
!NEW! Version: https://www.printables.com/model/288965-new-v-minion-drag-chain-assembly-v2-zx (SEE Z-AXIS DRAG-CHAIN ASSEMBLY FOR OTHER FILES) Updated version of ZX JUNCTION (V2) that mounts to the X motor cage rather than the X axis…
update.. added the Chube mount. Disclaimer!! use at own risk (the camera is pretty close to the hotend) update… corrected the focus distance for VC3.1 RR toolhead and EVA 3 (November 24.) added the body for VC3.1 RR toolhead and EVA 3…
Y-endStop sensorLess Y-axis homing Happy 3d printing
Open front belt tension mod for Ratrig Vcore 3.1 enclosure version. This is a remix of julianjc84 most excellent work, please see the link below. This is also where you can find non-enclosure versions made by julianjc84.…
--------------------2025.01.17 Update---------------------------- I want to apologize to @MDFPereira for my criticizing his attribution to the BTT repo. To my defense and clarification from @MDFPereira, it seems the mounts on the repo are…
I designed this case and mount for a Raspberry Pi 7" Touch Screen running KlipperScreen on my RatRig V-Core 3 500. The mount attaches through and on top of the 3030 Corner Bracket on the side of the printer. This design is 100% 3D printed…
Height fix for newest EVA-3 toolhead X endstop for RatRig V-Minion. The idea was to make add-on part without modifying original parts. You will need another pair of M3x6 screws. No supports needed. Model is oriented correctly ready to…
!NEW! Version: https://www.printables.com/model/288965-new-v-minion-drag-chain-assembly-v2-zx Updated version of ZX JUNCTION (V2) that mounts to the X motor cage rather than the X axis extrusion, you will need included X_motor_cage_V2 .
I didn't found a ready to print STL for the RatRig Logo. So I designed a SVG in Inkscape and created a STL with OrcaSlicer. I printed this to have a logo on my V-Core 3.1 Electronics Panel. Have fun!
Note: You will also need to download this sizing guide . Design Intent On the bottom face of the tube, the metal-to-metal clamping stack in the stock design is maintained without adding a layer of printed part in between the nut and the…
Unfortunately RatRig's Toolhead 1.0 for V-Core 3.0 and 3.1 is only available with inductive probe mount, not with a beacon version. So I've created one myself using the release version step-files. I've not yet installed and run it myself,…
beacon Version i am using at this point in time: v1.0.0-27-g1e7511ca Check the beacon quick start guide before copying my config and possibly damaging parts. https://docs.beacon3d.com/quickstart/ Config i am using ( USE AT YOUR OWN RISK )…
Hey feel free to test it and please give me some feedback :)
This is a Remix, merge and refactor of SquirrelBrain's and Orson80's awesome case designs for the RatRig V-Minion. I needed more space for my SKR3-EZ, which the Orson80s design fit, but I also like SquirrelBrain's RPI modular design, so I…
Print in a durable, electrically non-conductive filament. Pair with an IEC 320 power socket and the RatRig VCore3 IEC Socket Adapter . A hole is available on the far side of the cover for the mains wiring to exit. Note: The the top and…
Full parametric version of the the stock Ratrig V-Core cable trays. Can be used for other 3D printers or any projects that require cable management. To change the parameters of the cable tray you will need to open the model in Fusion 360.…
Ratrig Wire Guide with a thinner base and closed mounting holes. I installed this in my V0 with VHB tape. I made a normal version and a taller one.
Chube is the greatest and latest hotend in the 3d printing market, featuring a staggering 42mm of meltzone! Chubes packaging doesn't just help create a massive meltzone; it also has a lot of rigidity thanks to the shroud design. These…
Wall Count: As many wall counts to fill the entire part Infill: 100% infill Material: ABS/ASA
It is designed for the DIN rail distance (101.0mm) between of the DIN rails mounted on the electronics panel of a 400mm RatRig V-CORE 3.0 and 3.1. It will not fit other dimensions of the V-CORE! For assembly you need: 4x M4x10mm Cap Head…
Here is my design for mounting a carbon square tube and MGN9H rails on RatRig Vcore-3. This also solves some issues while tightening XY joiner plates and pulleys/idlers alignement. Note1: New XY joiners can be used on it’s own with…
This is a lengthened spool holder for 3030 extrusions. Should be compatible with the kit that comes with your Ratrig with the only exception being the longer PTFE tubes you will need. Print on its right side.
Use the default RatRig print settings recommended in this official link here . The .stl model has the correct oriented position on the build plate. P.S. Sorry, I only had stainless steel screws and no black screws.
Previuous version have some problem on belt position, if you already download the previous version, re download again. I already fix the belt positioning deviation. Report any issue to github/vzbot discord or here. MGN9 only. Refer to vz…
These are side panels for the Ratrige 400mm V-core 3.1 with enclosure model 2.0. This one I made because I could not find any for the plug that I have. It's for an AC plug that measures 2.25in tall by 1.25in wide. How to edit this. There…
@9.4.2023 : Duct for Rapido UHF added Design is prepared for original VzBot CNC printhead and following hardware MGN09H linear rail Rapido HF/UHF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file…
Why? I upgraded my VCore 3.0 to 3.1 parts, including the Oldham coupled bed arms, and I couldn't find a rear bed arm dragchain mount that fitted the new arms, combined with the “old” rear panel with the cable canal on the bottom so I…
I designed this part as an addition to @PicklesTheCat 's internal spoolholder (https://www.printables.com/de/model/314528-ratrig-vcore-internal-spool-holder-filament-path) It has an internal thread and allows you to screw in the PC4-M10…
Modular cable spines for wiring the electronics panel of your Rat Rig V-Core 3. They are connected using 1x m6x12. They are larger then the original Rat Rig cable spines to allow for more/thicker cables.
Pretty self-explanatory I would think :) Use M6x12mm hex screws and washers
This is a mount for using a 40mm fan in combination with the CNC machines VZ-Bot ratrig printhead. It's specific for using the Vz-Hextrudort and Rapido hotend. It is a WIP as I am still building the printead. STEP file is included for…
Filament/PTFE tube guide for Ratrig V-Minion and other 3d printer with 8mm nut. Pushfitting M10x1 - 4
When building my V-Core 3.1 I had trouble attempting to keep the X-Y 3030 extrusions square with each other while tightening the brackets down. I designed this square to be clamped to both extrusions and then the bolts be tightened in the…
Add DIN rail support to the RatRig VCore without needing to remove the electronics panel. A drop-in place mounting bracket for DIN rail. Designed primarily for the 400mm VCore3 and works well with 500mm long DIN rail. Untested for other…
LED holder for flexibel LED-Strips from BTF-Lightning. I bought the leds here: https://www.amazon.de/gp/product/B08JYYTXMF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 You must use the led lights with 10mm width. You can stick it into…
It always bothered me that you can't align the magnetic print sheet on the magnet very well on the V-core 3. With those small prints you can now. They are simlpy slid on the back edges of the Bed plate and clamp themselves into the unused…
Mount for BTT HDMI7 on RatRig V-Core 4 (with or without Enclosure) This mount allows you to securely attach a BTT HDMI7 v1.2 display to your RatRig V-Core 4, whether you have an enclosure or not. For earlier versions of the HDMI7, use the…
Use the default RatRig print settings recommended in this official link here . Bambu Lab A1 Mini nozzle wipers from AliExpress .
RatRig V-core 3.1 Euclid Mount & Dock for Eva Volcano Duct x_offset: -27.94 y_offset: -20.21 Please upload your makes, would love to see them
Ratrig LAN adapter (fixed) for standard Keystone/RJ45 I had problems with the Ratrig Vcore LAN adapter. No standard keystone did fit in (had different Manufacturers to test). Derived from the original 3D File provided by Ratrig, the Part…
Refactor of the RatRig electronics_wire_guide_rear to support a CPAP hose.
Higher X-endstop to match with Eva 3 release, with or without RR logo Original file by Pawel KUCMUS https://github.com/pkucmus for Ratrig :…
This is merely a pre-release for adventurous builders before i get around to installing this system on my machine, tread carefully. A modified version of the enclosure 2.0 front panel is in the works. This modification is technically…
I modified the lead_screw_constraint_front_left_3.1 and included the Euclid probe to use the probe with the Enclosure 2.0. The print orientation can be seen in the photo, no support is needed
The famous RatRig rat printed in 2 colors (MMU / Rome)
305mm between verticals. Not sure how to convert bambu studio file with negative modifiers to STL with the modifiers still in place, so yea.. STL is the version with no sliders, the 3mf file can be sliced in bambu studio, and will let you…
a new Version of my T1H printhead design for the RatRig V-Core 3 using a MGN12 carriage and a billet main plate. Rapido, Beacon and Orbiter 2.0 on the comparison picture you can see a EVA printhead, T1H and the new T1H2 printhead short M3…
I widened the vcore 4 umbilical guide and opened it up to accept more wires for the umbilical cable to the toolhead.
You-tube video This is a compilation of other mods to the X-Y motion system. Original mods RatRig V-Core 3.1 XY-joiners gold series with V3D mod - By Arthur_C…
Big thanks to JP3d for his mount of uhp 350w , but i'am looking for PSU for the V-minion good and available and much cheaper than UHP-350-24v. SO i found this power supply for 35€ ( important it is not better than UHP-350-24v by any mean…
Camera module housing to add a OV5648 5MP USB Camera Module to your RatRig V-Core 4 3D printer (or any other printer with 3030 extrusions) All credits goes to chri.kai.in for the original design of the Angry CAM USB. Print instructions:…
it is suitable for the case of using lightweight x tube in the lightweight modification of ratrig-vcore3. use M5 locknut instead of T-nut.
RatRig V-Core3 without enclosure: Led mount Dayspring RatRig VCore 3 LED by Vector3d da Jake90 | Scarica il modello STL gratuito | Printables.com BOM: 2x sup_led_enc (1).stl 2x sup_led_enc (2).stl 4x cap head screw M6x12 4x Tnut m6 3030…
This is a remix Meanwell UHP-350-24V power supply mount designed to attach to the Ratrig V-Minion 3D Printer from JP3d . These brackets fit the Meanwell UHP-350-24V power supply in combination with the XP Power FGSM inlet for Ratrig…
!!!!!!only works for V1 camera !!!!!!!! i am working on the V2 design this mount is made for this camera from 3DO https://3do.eu/3do-camera/1239-3do-nozzle-camera-sony-4k-camera-only-2.html BOM 2 pcs M3x6 (to clamp the camera to the…
I wanted to make a fully metal AWD mod including belt tensioners, so basically I merged these three excellent designs to create this mod/ remix (thanks for the inspiration guys!). I already have it working on my RatRig V-Core 3.1 without…
Modified parts for the VC4 to suit enclosure panels other than 4mm thick.
Hello! There is a modified backand toolhead mount to accomodate a CPAP cooling solution for the RatRig Toolhead on the VCore 4. It does require for the current plate to have the 4028 mounting part cut (cutting template included) as it…
Hello! Here is a remix of the Voron Trident Auxiliary Fan made by @JacobG3231_143196 , making it compatible with the RatRig VCore 4. Please refer to his model for the BOM and assembly instructions. The extra parts required for this remix…
Belt tensioner to be mounted on the frame of the V-Core3 and 3.1 legacy. It allows to remove EVA 2 and 3 heavy belt tensioner from the carriage and make tensioning much easier by placing tension screws on the front. It replaces stock…
For using piano wire to support your umbilical cable. Fits up to 1mm piano wire. Tension the wire in place with an M3 screw (I recommend an M3 grub screw, but really any type of M3 screw will work).
V-Core 3-Gehäuse für den Bigtreetech KNOMI!
These wire ducts are designed to attach to the 3030 extrusion at the bottom of the electronics portion of the RatRig V-Core 3. There are 4 different lengths of ducts depending on the size of the V-Core (200mm, 300mm, 400mm, 500mm). They…
Update: I was told that there was some 2mm magnet-holes in the body, when they should be 3mm. I corrected this in the fusion and the STL-Files, but not in the Pre-Sliced files. You either need to work with the STL's, or buy some 2mm…
Hello there! This is a simple holder for a 60x60 PTC heater. It mounts to the rear corner of a Ratrig V-Core or other printers with 3030 extrusions. The frame mount design is based on the top lead screw constraints of a Ratrig V-Core. The…
This is a mod to Rat Rig's V-Minion 180 printer to remove the separate electronics box and make the printer a single unit. Electronics box is designed to take boards compatible with Ender 3 board - SKR E3 V2 in my particular case. The…
Modified version of the X belt tensioner of the RatRig Minion. The original required a Square nut that could when inserting crack the part or creates a bulge on the outer wall what would make sliding in difficult. Design is for…
Do you want your PEI sheet to sit perfectly and easily every time you put it on the print bed? Of course you do! Print two of each of these and you should be all set. Just add 2 16mm M3 countersunk screws and a bolts to keep it nice and…
This is something I put together to let the community make. It's an all machinable aluminum XY Joiner. The design is free for anyone to make and distribute if they so desire. I have only printed this to test its fitment.
Under development This model is a conversion of the 300mm RatRig V-Core 3.1 IDEX "Wide Boy". The original model: https://lab.ratrig.com/vc31_idex_wide/ Modified printed parts: - xy_motor_cage_idex_top_left_3.1 -…
First off all you need a angled USB-C cable for the pi. (see picture) and 3mm heatset inserts, all parts are put together with Screws
My IEC switch has mounting holes on the sides instead of on the top and bottom, so I moved the panel holes to accommodate that. If you have a thick electronics panel and use m3 screws + nuts you might have clearence issues with it. To…
![Ratrig Vz Printed Printhead [Beta][Untested]](https://media.printables.com/media/prints/379041/images/3182847_9094d9c8-64b4-4e48-818b-1a31c0cb11ba/screenshot-2023-01-24-063953.png)
