324 modeli
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Wydruk około 5,05 €–6,17 € nettoWstępna wycena jednego wariantu
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Wydruk około 5,01 €–6,12 € nettoWstępna wycena jednego wariantu
This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
WordClock 16x8 - 2024 BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To…
Wydruk około 12,20 €–14,91 € nettoWstępna wycena jednego wariantu
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Wydruk około 6,06 €–7,41 € nettoWstępna wycena jednego wariantu
Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Srdce přívěsek na klíče
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This contains only the German version of the Word Clock but with a closed front, but it's adaptable for other languages if you take a look how I stacked the different colours. I used a darker bronze gold (from Redline Filament) for the…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
A base for the first three Doctor Who models from tottersyardcustoms. https://www.ebay.co.uk/itm/285804251605
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
Srdíčka vytvořená v TinkerCad - jedna verze z kruhu a trojúhelníku, další ze základního tvaru srdce. Piškvorky.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
(Printed in Fiberology PCTG Onyx, Clas Ohlson PLA Gray, Bambu Lab PLA Black) This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for…
WordClock 16x16 - 2024 This is the 2024 variant to the WordClock 16x16 model adding new functions and features as well as a new font as V2 variant. =) This WordClock 2024 variant covers mostly every input I got from users in the last 2…
I made this hardcase for my multimeter and the accessories, but can used for other purpose
>>>>>>>>>>>> NEW Version 2.0 is available here. <<<<<<<<<<<< ------- This is the older version 1.x. Click here to get new model. This hardcase lets you scale it to suit you needs. Model is free. Please consider uploading a photo of a make…
WordClock using LED stripes with English and German layout with lots of functions and web interface. UPDATE 19.04.2025: There is a new modern variant available now, which has many more improvements and does not need any soldering to build…
This tray replaces the owl that is provided with the CR Scan Otter and allows for storage of up to 12 magnetic markers. I modified the marker pyramids to use magnets with a diameter of 6mm and a thickness of 5mm. But the original pyramids…
It should be easy to put the drone in and out of the box. Therefore, this is not a "lid" design, but two halfes. You can easily grab the drone when the box is open. Have a look at the YouTube video: https://youtu.be/qLaCz_ccFZk The main…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for bridge-size cards, so they will not fit poker-size ones Bring the playing cards…
Anatomicky přesný model srdce ❤
NOTE: This model is created to fit quite snug, so in order to account for filament shrinkage you might have to scale the model up to 101 or 102% Print with .12 layer thickness. enable tree supports. Make sure to clean the inside of the…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
Hardcase to scale to fit the size of your need. This new version 2.1 of the hardcase has a list of minor changes as well as functional improvements and design was slightly changed to be easier to print all compared to the old version 1.0…
Deutsch: Ich habe für unseren OV weitere Schlüsselanhänger, diesmal in der Form des Seepferdchen-Abzeichens designet. Das Model basiert auf dem Orginal Seepferdchenabzeichen ( DLRG-Seepferdchen ). Die Schlüsselanhänger nutzen wir nun als…
Heart keychain (srdce klíčenka)
Five years ago, I faced a broken windshield washer cap in frigid Canadian weather. Frustrated with waiting for an OEM replacement, I designed my own. I've desinged a range of caps for various Ford vehicles. Tested on multiple models,…
I use a Logitech Mx Anywere 3 (Mac) for my Macbook and this wasn't an issue until i've been bringing my Macbook to work and dumping it on my Timbuk2 messenger bag. The mouse often gets squished and buttons pressed from movement of inside…
This case ist for shelly 2 modules. Up to two Wago-221-terminals can be mountet. For cables with outer diameter of 8mm, no additional strain relief required. For thinner cables zip-ties may be needed. To mount the top part, four M3x20mm…
My friend wanted nest for birds in cage and i couldn't find any what he wanted (only fancy stuff) so made a new based on what he has already. Also publishing Fusion file so please do better job :D 11.2.18 EDIT: added V2 with a cone shaped…
Summary Minimalist hardcase for your M5 Cardputer — designed to protect both the display and keyboard. A small opening on the bottom allows you to easily push the device out when needed. If you’d like to support my work, you can also…
The Schwimmabzeichen “Seepferdchen” as a medal. Printed in dual color with filament change after the 1mm-layer.
Use this STL to customize your own name plate for your Apache 4800
I designed this simple Hardcase for my Softcase Zeee 3S 5200mAh LiPo Batteries because most tracks here require hardcase batteries and its safer anyway. The case consists of two parts, a body and a lid. The lid snaps in place with 3 tabs…
D20 dice jail perfect for a keyring Needs tree supports and almost solid infill THIS IS FOR PRIVATE USE ONLY If you wish to sell this item follow me on Patreon or Thangs3D
Wordclock Matrix 11x11 Frame for WS2812B LEDs. LEDs can be simply clipped into the frame. For the Wordclock Frame i use a IKEA Ribba 23x23cm Frame https://www.ikea.com/at/de/p/ribba-rahmen-schwarz-40378401/ Source Code for this project…
Keychain Hardcore. For all the enjoyers of the harder styles (hardstyle, frenchcore, hardcore, uptempo, terror, and mutch more) If anyone has any questions please contact me, THop3D
This is a single GoPro 9 battery case with a slot for a micro SD card. Prints without supports, the only support needed is built-in, remove after printing. The 3mf file consists of the top and bottom parts, place them separately on the…
Něžný zápich ve tvaru srdce. Celková výška 22,5 cm.
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so. Please enjoy and share feedback~ Included models -A plate blank -An ‘Emergency’ plate Print resolution Doesn't…
Valentínske srdce zložené z dvoch častí. Aby jemu/jej pripomínalo v čase odlúčenia, že niekde je jeho druhá polka, ktorá čaká na vzájomné spojenie.
WordCalendar 16x16 - 2024 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…
Vzhledem k tomu, že papírové šablony pro obkreslování mají velmi nízkou trvanlivost, vytvořil jsem šablony srdce pro 3D tisk
Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate. I only remixed DE+EN Fronts so far, other languages would take…
This is a remix of the German Version of the famous and great "Wordclock 16x16 2024" by AWSW (https://www.printables.com/model/768062-wordclock-16x16-2024). So if you need information about the hard- and software needed, please look…
I love the idea of a wordclock but i don't liked the price of the original nor the very small letters of other models in the web. So i made my own - clean looking wordclock with big letters. How to print? → Print the front cover upside…
Zu der tollen Uhr von AWSW hatte ich ein paar Änderungswünsche, die ich mit diesem remix umgesetzt habe. Die Buchstaben sind nun bündig, um sie auch gut lesen zu können, wenn man nicht direkt frontal auf die Uhr schaut. Die Front und der…
PLA prusa or creality Printer - Mini+ first layer 213°C the others 203-5°C You can try ironning and higher speed. Change scale.
Quick design for a Pokémon TCG card case, can be used with sleeves too. Handy for transport or shipping. Friction fit!
Céčka mého vlastního designu, jsou tedy mírně jiného tvaru a rozměrů než ty “klasické”. Céčka mají osmiúhelníkový průřez pro lepší tisknutelnost. 3mf model obsahuje 5 ks od každého (18 ks) modelu (urychlení vlastníkům pomalejších PC -…
I make this travel case. Only you need are magnets ( 6 mm x 2 mm). Printed with support on bed (due the hinge). I recommend print first middle part (hinge with one magnet hole) /just cut left and right side of case to spare time and…
Hardcase DJI Osmo Action 6 Salut à tous ! Je vous partage aujourd'hui le design de ma Hardcase pour la DJI Osmo Action 6 . Ce design est directement inspiré du style de protection développé par Yannick FPV , axé sur une robustesse…
BIG news on 18.07.2026: Software version V2.0.0 available! WordClock 14x14 Classic received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of…
Malé srdce s použitím změny barvy při tisku
WORK IN PROGRESS !!! I AM ACTUALLY JUST PRINTING THIS SO CHANGES MAY COME AS I FACE PROBLEMS !!! Bleach Ichigo chain “printinplace” from entering soul society So i was rewatching Bleach and one evening i decided to do some modeling and…
Vykrajovátko na sušenky a cukroví ve tvaru srdce
Zápich ve tvaru srdce. Výška cca 19 cm. Cake topper as heart. High is approx 19 cm.
I bought an FDE Apache 4800 case from Harbor Freight and I wanted to customize the look/feel of the default latches. Print on a side so you dont need supports and you get the most strength. I used 0.2 mm layers with 5 layers for…
MoH (Masters of Hardcore) logo It's the cult logo from the 90s, at least for me, it's easy to print but some support is needed for the horns
Made on request, and now for all to use STL is at 1mm so you can do with it whatever you need it to do. Have fun :) The “hand” photo is a 1:1 not resized print on a Ender 5 in PETG . It holds , but you MIGHT want to give the Z a bit more…
Nejlepší dárek. Dovnitř můžete dát např. čokoládu.
You can choose which way to insert the playdate - with the ports accessible, or not. Should slide in and out easily, but not by accident. Proudly made in Tinkercad! If you want to make your own version see…
Zapich na tortu v tvare srdc
This hard case is designed to protect the mouse when going out with the laptop and G PRO X I printed this with P1SC You need 8 magnets. (10mm x 3mm) To add color to the logo, You need AMS or ERCF Here are two versions available: one with…
Hardcase DJI Osmo Action 6 gopro mount Salut à tous ! Je vous partage aujourd'hui le design de ma Hardcase pour la DJI Osmo Action 6 . Ce design est directement inspiré du style de protection développé par Yannick FPV , axé sur une…
Always wanted to build a wordclock and saw these cheap WS2812B 8x8 LED-panels (you can find them by searching for WS2812B 8x8 on a shop of your choice), so I started to make a model. All files are sized for the ones with the 6 holes, you…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Designed for printing with 45* and rads where required. Screws on right off the printer into an M14 LEFT HAND thread. For my airsoft 416. Print Settings Supports: No Resolution: .16 Category: DIY
This model represents the functioning cowl flaps on early Vought F4u Corsairs (non-D or later), but could be modified to work for D and later models. The original design set the flaps in the open position via springs using the airflow…
[EN] Simple three-colour heart-shaped pendant. The pendant is adapted for multi-colour printing in layers using the M600 command (or simple manual filament change). The ideal layer height for printing is 0.25mm (then exactly 2 layers per…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Vytvořil jsem pro Vás model krabicky ve tvaru srdce na bombony, nebo jiný darek pro svou drahou polovičku. Už se blizi Valentin…
Tento model je vhodný jako dárek pro maminku třeba na Den Matek.
Very easy to print, with no supports. You will need 4 6x3 Magnets. Its super durable but still the glasses wont fly around in it. Its made for my oakley sunglasses, but i guess due to they are really big, nearly any glasses will fit in…
A beautiful minimalist painting of a Heart on the wall. Size 200 x 200 mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15 % Filament: PLA Notes: Top/botton pattern -…
Materiál pro tisk PET-G nebo ASA 275 Výplň 100% Vrstva tisku pro sponu 0,3mm - vrstva tisku pro jehlici 0,2mm Perimetry pro sponu 2 - perimetry pro jehlici 5
WordCalendar 16x16 - 2025 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…
HardCell Class CIS transport for Armada. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will get free and exclusive model, Etsy shop deal and…
A beautiful minimalist painting of a Heart of roses on the wall or with a stand on the table. Size 199 x 200 mm You can find the small print stand for the table on my profile ↓…
Hardcastle and McCormick - 1983-1986 3D printable model.
Here you can find some of my designs for the Hardcore-Begleri Begs from Aroundsquare ( https://www.aroundsquare.com/products/hardcore-begleri-hardcore-gut-beads ). Some are just fun and others are very playable. Try them out and find your…
Found a pretty good A2 birdcage flash hider on Thingiverse, but it doesn't actually seem to have the correct threading, so I edited it and added the 14mm CCW (M14x1 LH) threading that's on most airsoft replicas you would want to put an A2…
Multi-purpose upgrade for Sidewinder X2 (and maybe X1, Genius Pro) 3 Mount-plate Versions. Mount-plate for Fanduct and BLTouch Mount-plate for Fanduct only Mount-plate for BLTouch only Stepper/Electronic Cover with Airgaps replacing the…
I used Purefil tranpsarent green PETG for this print: 255°C, 70°C bed temp. 0.16 layer height. retraction length 5mm at 35mm/sec, movement speed 120mm/sec. infill at 80 percent, used gyroid infill for overall strength. some post cleanup…
heart send mold / bábovička srdce
I wanted a small box for my GoPro Hero9 with room for the remote and a few connectors. I padded the bottom of the GoPro compartment and the lid with 1mm thick self-adhesive felt. The hinges and latches require 6pcs 3x30mm screws or grub…
Desing for Rail RDC For other models (Hiwin, etc..), please, give me a feedback if works Layer print: 0.3 Infill: 10%
Hello everyone, I love modeling different colored cakes, so I modeled a Homer Simpson with a Valentine heart for you. If you would like more cake toppers, you can contact me. If you would like to legally sell my models with a commercial…
I saw a lot od different cases, some better or not so good. Just decide to make my version with dust/rain protection. In this case using some TPU elements Just to understand how assemble there is Assemblem obj and stl. On the renders…
Here is: Wall Art or Magnet or… its up to you. With a Evil Zombie in Santa Claus Hat. Perfect funny gift or gadget for upcoming Christmas ;) The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too.
This is a remix of the german " Wordclock Wortuhr " case comprising the following changes: I added a printed diffusor layer finishing the front cover. I removed the hanger assembly on the back and the cable inlet on the side as I prefer…
Been experimenting with Li-Ion, LiFePO4, and LTO-cells in different sizes, these are a few different holders I've whipped up over the years. Some of these are quite quick'n'dirty slap-together-jobs, and might have duplicate faces from…
Jednoduchý model prstýnků, bohužel si musíte trochu pohrát s velikostí, ale tisk jednoho trvá cca 10 minut
Printing Details The front plate, which displays the letters, is printed in place using two or three filaments: Black (or any other) filament Transparent filament White (optional) – This acts as a diffusion layer to ensure the light on…
This remix can be printed with non-flexible materials as I removed the edge on the backside. Printed mine with ABS+
This parametric LiPo HardCase can easily be customized to fit your LiPo SoftPack and turn it into a proper HardPack. My design approach was driven by the following requirements: slim design to fit many batteries and RC car's battery trays…
