Liczymy pasujące modele…
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own. Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scaled model of a dream house made of 4 pieces. Easy to print and assemble. Designed in Fusion 360. Floors and walls are easily printed flat but roof is best to put in vertical position (like in my gcode). UPDATE - You can print the roof…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Screaming Goat Disturbing.
Wydruk około 10,16 €–12,41 € nettoWstępna wycena jednego wariantu
Overview Simple little ice cream cone that can be printed with different "flavors" of ice cream. Printing I printed using two different colors of PLA on the Prusa i3 MK3. The included g-code is setup to print in two colors for the cone…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Apart from your favourite filament flavours you will need 5 x 1 mm magnets and optionally a few drops of super glue, to hold everything in place. Here are the magnets I have used, they can be bought pretty cheap on Amazon. If you have…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Kids love to play kitchen and of course kitchen sets can get pricy. I decided to make a set that is easy to print and gives the option for kids to “custom order” the snacks that they inevitably bring to you. I would love to see some makes…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Haptic model for the visually impaired, based on the book " Překvapení skřítka Modrovouska " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Bobble the head of your favorite treacherous Air Commander of the evil Decepticons! Get the rest of the needed parts (spring and base) from the linked original Bobblehead models, or use my 3MF file, or print the provided gcode appropriate…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
This is a simple cone holder to help while putting the ice cream tub back in the freezer. Print with top against build plate. No brim or support should be needed.
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Design stolen from Deviator2x. Simple, functional, and small. Thanks! The V4 design is a parameterized Fusion 360 model that supports various tube widths. .stl and .gcode files are posted for 60mm wide toothpaste tubes and 120mm wide sour…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A handy thermos cozy thing for Ninja Creami containers. Dual wall design with a large air gap in between for proper insulation. Keeps ice cream tubs cooler and ice-creams unmelted significantly longer Prevents water condensation and drips…
Wydruk około 9,08 €–11,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A double bottle stand for the sodastream DUO bottles. Glass bottles and plastic bottles fit into the rack and the caps can be inserted. There is also a drip tray if the stand cannot be placed at the sink. Printed on a MK3s with PLA in…
Wydruk około 5,46 €–6,67 € nettoWstępna wycena jednego wariantu
This model expands the existing colour options by allowing you to use any filament you have in storage, enabling you to fully customize your Elgato Stream Deck + to match your style and aesthetic preferences—all without paying 19.99€ +…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
I started with idea of something abstract and then I got ice-cream in front of me :D
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
All credit to https://www.printables.com/model/152938-fire-tv-remote-holder I just cut out a larger window with Tinkercad. A wall mountable holder for the Fire TV™ remote. It should be compatible with multiple versions of the Fire TV™…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
NEW UPDATE - The assembly issue has now been resolved! You can now use the “Spill_Unbeveled_Fix” file to assemble the spill to the cone and scoop! If you prefer, you can also use the gcode file provided. Again, apologies for any…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles. Print with standard settings in PLA or PETG
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock. The trigger lock will work with any…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Dies ist eine Ersatztülle für einen knapp 50 Jahre alten Sahnespender. Sollte die Tülle so leicht aufsitzen kann diese entweder lackiert werden (Achtung: Lebensmittelechten Lack verwenden!). Alternativ kann das Modell auch 1-2% kleiner…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Wall art: The dream of this one human (two colours)
Wydruk około 3,87 €–4,72 € nettoWstępna wycena jednego wariantu
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Using empty Sodastream syrup bottles as containers for herbs, spices, and salt is a practical solution. Their narrow, tall shape fits perfectly in slim kitchen cabinets, saving space while offering high capacity. They are ideal for…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
The Art DJ Pre II is probably the ugliest piece of technology I've ever owned. This model is an attempt at fixing this. It allows mounting the preamp to the underside of a shelf (although technically wall mounting it would also work). The…
Wydruk około 4,88 €–5,97 € nettoWstępna wycena jednego wariantu
Le streamdeck est utilisé avec des adolescents scolarisés, en situation de handicap. La précision gestuelle est parfois délicate. Le guide doigts permet d'éviter de taper deux touches proches en même temps. Réalisé en PLA, remplissage 15…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Wall art: The dream of this one human (two colours)
Wydruk około 4,50 €–5,50 € nettoWstępna wycena jednego wariantu
This is the recreation of a very old toy I used to make as a little boy. I “stole” a large clothing button from my mothers sewing basket, and added a piece of string. Spinning around the button until the line broke…. The modification I…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
I like "sodastream" bottles and use them while cycling. But when my hands are wet, unscrewing the original caps is very difficult. These covers for the original caps do the trick. They add little to their size (they are quite thin, look…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I noticed that after using this cap a bit the plastic on my can of Barbasol was a little bit scratched up so expect that, I'm working on a new version…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Caja para transportar dentro de una mochila el StremDeck y evitar que se arañe
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
Wall art: Dream (three colours)
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The original orange screamer sound like a jet engine or f1 car this 4 rotor version sound more deep just like a rallycar
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
My new Sodastream Terra was constantly releasing pressure through the left release valve, as of the first press, while pressing, and way before the bottle was partially (not even fully) carbonated. I read online it should make a…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Simple 2-part sodastream bottle stand that assembles for use, and disassembles afterwards in seconds for space-saving flat storage in a drawer (or similar). Printing: Material - anything you like really - not important. Silk PLA pictured…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Wall art: Dreamy land (two colours, three colours)
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Pro-Ject Phono Box MM Pre-Amp Mount
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was annoyed that our empty plastic water bottles always topple over when we open the kitchen drawer. So I made this holder which keeps up to three bottles in its place. Although this minimalistic design looks quite fragile, it is…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
I needed some drink coasters so I figured why not make some. I went through 4 iteration of the base coaster design so that They can snap together like LEGOs when not in use. I printed these with a overall size of 100 mm diameter and they…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.
Wydruk około 5,91 €–7,22 € nettoWstępna wycena jednego wariantu
About the Streamline Phone Stand: The Streamline Phone Stand is designed to be both functional and stylish. With a height of approximately 66 mm and a width of 56 mm, it offers a very compact, stable base for smartphones. The curved lines…
🦎 Tom the Lizard – The Ultimate Dashboard Drama Queen! 😂 SOMEBODY HIT THE BRAKES!!! 🚗💨 Meet Tom, the world's most terrified passenger! With his eyes popping out, tongue flying, arms stretched wide, and mouth screaming for dear life, Tom…
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
There are many of these on the internet, but I wanted to make my own one anyway, purely because I like to design things. The one thing that makes this different is that is can also accomodate bigger hands. There is a hole in the bottom so…
It works, it is loud, it is now in 4-tones at once! Use at your own discretion. Printed at 0.25mm layer with a 0.4mm nozzle. Use PETG(preferred) or PLA. Make sure you align the Z-seam along one of the valleys between the chambers. See my…
UPDATE: Added a clean body version so you can scale the pumpkin up with no big fuzzy skin effect! Get ready for the screaming pumpkin, who’s just as scared of Halloween as you are! This Halloween pumpkin will add the perfect touch to your…
Description : This slim & sturdy wallet has room for (6) cards and a bonus slot in the middle for paper cash. Why no coins? …Because: My Money Don't Jiggle Jiggle, it Folds . (sorry could not resist… lol). The model is quite versatile &…
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Your compressed air can is empty and you have dust to blow out? Then it's time to take a break and drink the perfect sparkling water. But unfortunately, your Soda Stream can is running out of air and the water isn't as sparkling? Good…
This is a reinforced version of UDM mount by Revnull. Who's desighn while elagent and well desighned is lacking structulary. So to prevent a repeat of the brackets snapping i have redisghned it to have quater circle reinforcemnets up each…
This is an ice cream cone screw top. I printed it & uploaded a photo to share to a 3d Printing FB group and many people asked that I upload this file because, it used to be here:…
Source: https://www.thingiverse.com/thing:455093 Summary This is a pocket sized turbo whistle or siren which emits a loud and extremely annoying WHEEEEEEEEEEE when you blow into it. This design was inspired by Instructables user Kiteman,…
NOTE: this interface was designed to suit the studioform BSB X1 foam interfaces/the original V1 studioform dream air interfaces (which were the same thing). If you want to use the newer v2 studioform interface they are notably larger and…
My Etsy shop here: https://www.etsy.com/listing/4510203095/alien-xenomorph-3d-printed-sculpture?sr_prefetch=1&pf_from=shop_home&ref=shop_home_active_1&frs=1&logging_key=2556fbefeed79bdc8648fb177258d99dc1bc8de8%3A4510203095
Use case a cream jar for hand cream I have printed a whole bunch of these cute little threaded containers (Also because they are a great benchmark to check if your printer has a clean and even extrusion, which is apparently not always the…
Print instructions Supports are not necessary. I printed it in 0.2mm resolution and 15% infill with PETG
Dream Catcher Owl. Fixed for 3d printing.
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
Print & acrylic draw!
***Update*** I have uploaded versions with a smaller overall diameter. I have a SodaStream Duo and it came with one plastic bottle and one glass bottle. I wanted to have a stand for them to let them dry upside down. So I did some changes…
Simple and easy to print replacement-nut for the pressure hose of the SodaStream Crystal 1.0 and 2.0 and SodaStream Jet. If you have the option, select the "Nut.stl" file. The other file, "Nut_Co2_side_slim.stl", is designed for the side…
Dreamy Hedgehog Sculp 3D model ready to print.
This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…
I designed these earrings as a tribute to the movie Scream. I created 2 different sizes and one with the black hood and another which is a plain version. If you enjoy my designs, please consider a donation: https://paypal.me/melix3d all…
Fully articulated flexi dragon with a heart theme just in time for Valentine's Day. 2 Color print via AMS, single color print profile available too. No supports. Gyroid infill.
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Introducing the FDM (Fixum Dude Motors) print in place ice cream truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Features: Prints in one part Fits on glass bottles (Sodastream crystal) Fits on plastic bottles Easy on your printer Many different designs to choose from Printing: Choose the design you desire for your bottle type and print it with at…
I designed this to keep the CO2 bottle for my budget aquarium C02 fertilizing from tipping over. Fits an 425g C02/60 Liter/ 60mm diameter CO2 bottle Print instructions Used PLA, 0.3mm Layers
Ghostface - Scream The iconic character from the movie "Scream"The iconic character from the movie "Scream" To achieve the effect shown in the photo, you'll need a multi-color printer. You can also paint it yourself or print it in a…
Inspired by jurriaanpruis' design , this is modeled to use either screws or large 3M command strips to mount your Unifi Dream Machine to the wall. It has proper ventilation on the bottom to allow your Dream Machine to breath. Includes a…
This is the nut that connects the little black CO2 hose, the hose has to be pushed through the slot in the nut. Printed with PLATech for strength. No supports needed Print instructions Category: Replacement Parts
Note my print settings are recommended, I needed to do a little filing on the tang, but it fit perfectly besides.
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest design:…
A coworker gave me the idea a while back and I finally made it real. It works, it is loud. Use at your own discretion. For best results try 75-90PSI, much over that it overloads the whistle and gets quieter again. Printed at 0.25mm layer…
Remix of https://www.thingiverse.com/thing:4240305. Made some edits to it to fit my liking, mainly to get an aligned outer profile and hide the cable on top. Also the front plate is mounted from the back by using M3 inserts (Turmberg3D…
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
I use the Elgato Stream Deck XL as part of my flight and space sim rig, and needed a model to properly design a 3D-printed flight console to house it. Since I did not find any accurate models, I am making the 3MF, STEP, and Fusion 360…
A model of a standard, easy-to-print SodaStream cap. I didn't use supports, but if you don't mind taking them off, print quality could be better with them. There are two ways to print this model. One is to print out the complete cap in…
SodaStream Glasflaschenständer zum trocknen
Extra long cone Don't forget to give me a like 🧡 Share photos of your prints 🍦 Personal use only⚠ 👉 Check My Patreon 👈
The container lid closes very tightly and locks well in place, due to a tiny thread-like design at the end of the bayonet mechanism. This gives the outside of the container a very smooth appearance without any visible gap, while at the…
Modeled after a classic sugar cone. Two embossed text options: “ICE CREAM” or “ICE PLANT” in case you want to stick a succulent in one and give it an ironic label. Print in vase mode with at least 0.8 wall thickness. Also, hopefully I…
A friend of mine was missing a few parts (specifically the pool) for a Barbie Dreamhouse. Due to the difficulty in finding a reasonably priced replacement part, and the belief I could make a better looking one, I printed one out of…
These are small printable masks of Monomon, Lurien, and Herrah from the game Hollow Knight. They were designed to clip onto straps like those on backpacks. Each mask is a two-piece print. I printed the masks in white and the clips in…
This is an under-desk mount for the Elgato Stream Deck+. If you detach the base of the Streamdeck, you can use the two screws its attached with to screw it into this mount. Then you'll need two other screws to attach the mount to the…
These models/files are for making airless basketballs out of either the Wisdream FlexiTough or DudV2 PLA-B filament. I could not add all of the STLs/files to this page because the file sizes are too large. If you would like the…
Ever felt like you need a large novelty container in the shape of an ice cream cone? Well, HERE YOU GO! You have the choice between a soft-serve ice cream cone and a traditional scoop of ice cream. Enjoy! Print Instructions: No supports!…
An adapter to use soda bottles (European?) with your SodaStream machine. This adapter fits the older style of SodaStream threads (pre 2018?). What differs this from the others here on Thingiverse is the grip on this adapter to remove it…
