47 modeli
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
I printed with 0,4mm nozzle an 0,12mm layer height. Threads turn out nice. If want to do it even better adapt the layer height at the threaded area to 0,08mm. But as told it works nice with 0,12 as well. Hole for screw is 3D print…
I'm in the process of fitting my v-core 3.1 with an ERCF and I tried to get a toolhead sensor going, and after making one with a Hall effect sensor I realized that it's pretty bad and unreliable. So I made my own version for the EVA 3…
What is the most obvious thing to do when the handle of your drawer breaks off? Replace it with a push to open mechanism ;) Replace or extend your drawers with the convenient push2open mechanism. The drawers should have rails. it is also…
Background I was using an inductive sensor as my main Z_min sensor. I was unable to use it as bed leveling sensor because I was using a very thin and soft steel plate under the glass. This lead to several issues: the glass itself is not…
Ich hab echt viele Geldsortierer ausprobiert, aber meistens gab es zwei Probleme: Entweder waren sie total kompliziert zu drucken oder die Münzen sind ständig stecken geblieben. Das hat mich so genervt, dass ich meinen eigenen Sortierer…
Please read Prusa Research's original post "Prusa Protective Face Shield - RC3" for all best printing practices around sanitation before printing! Prusa Protective Face Shield - RC3 (Remixed for more reliable printing on not perfectly…
-Used a piece of 1.75 mm filament to join hinges -Original design: https://www.thingiverse.com/thing:1088473
1. Introduction Winter……oops………Hot Summer is Coming ! That's why I bought a portable air conditioner with a 150mm hose. Unfortunately, it is common here in Europe to have “casement windows” (windows with vertical rotation axis) while…
Rocket Launcher Toy, made more reliable by adding a pair of grooves inside, and two spikes from the center piece to fit in those grooves. This is a remix of the original from Nakozen @Nakozen :…
Mechanical keyboards and key switches can be expensive and what happens when just one breaks? You have to throw out the whole keyboard! What if you could print your own key switches instead for like $0.04 each? When one wears out (after a…
Howdy guys and gals! I wasn’t quite satisfied with the garden sprayers I could find in the store, so I made my own! It has an integrated stake and features 8 small streams that spread to a little more than a 12" diameter. It puts out a…
Connectors for IKEA Ledberg LED lamp, with flexible (using regular PET filament) connectors. I made these because all the other connector models had their male connector contacts too rigid, so one pole would often press the board away…
I had planned on printing this caliper case but realized it was for 6" calipers, while I had 8". I didn't want to get rid of the standard Mitutoyo case, so I designed this to attach to the top and be removable if I get tired of it later…
Most extruder rotation visualizers rely on superglue to hold the magnet on. This is not very reliable, as the magnet tends to fall off. So I designed better model, where the 8 mm magnet is held in a sleeve.
Introduction. The problem with most filament filters is that PLA tends to deform under the load over time and latches stop working properly. Notice how the halves no longer match up. So I was in a search for other ideas. Something that…
put it on Voron 2.4 's Z stop pin, the pin touches the hidden micro switch, so to make the pin higher, so the pin can correctly touch the omron probe in the tool head (omron TL-Q5M or alike), since the probe is slightly higher than the…
Low-Cost Heat-Set Insert Press – Simple, Precise & Reliable Installing heat-set inserts by hand? Forget the crooked, half-melted mess. This low-cost press keeps your soldering iron perfectly vertical for clean, repeatable insert…
Efficiently remove ice with our durable replacement, inspired by Skoda's design.
Adheres securely with heavy-duty double-sided tape. For best results, use heat-resistant filaments such as ASA or ABS. Sanding is recommended if printed in side orientation. An optional acetone vapor bath can further strengthen the part…
Be careful not to lose the spring and bearing! <smooth filament load> I printed five filler parts simultaneously using an 0.08mm Extra-Fine setting. Select one item in good condition. The print quality is working well with the image2.…
There are many marking devices for the line in the network. All of them are fixed either by a screw or a rotary cam. The screw securely fixes the marking bar, but it is not very convenient when fixing. The fist weakly fixes the bar. I…
There are 2 versions: 1: The pocket clip that is already bent (Strong) 2: A flat pocket clip and a forming tool in 2 parts (Very strong) I recommend printing the parts out with 100% infill and that the pocket clip be in carbon fiber PLA…
Represented as a physical card that you can toggle the toggles, and one will always be off. If you can, print the “Short Switch” and “Top Switch” pieces in a contrasting color. Assemble as per the diagram and glue the back in place.
Remixed to use 5mm idlers instead of 3mm, the rod hole is still 10mm. Print instructions Category: 3D Printer Parts Summary Remixed to use 5mm idlers instead of 3mm, the rod hole is still 10mm.
I printed LOVE23DPRINT's Flexi Rex for a friend and immediately got asked for MORE - but found out that they didn't always print reliably, the smaller parts coming unstuck from the bed and shifting about ¼ of the way through the print. I…
💊 Why I made this I often need to split tablets into quarters , but everything I found on marketplaces was designed for large round pills with poor-quality blades . Oval tablets would slip and crush , leaving lots of waste — and no…
I got tired of having my idlers mounts always cracking after some use (and abuse). Even the beefer remixes failed with some time due to cracks developing between layers. As an engineer I am aware that the position that the mounts were…
I tested different clips without success. Therefore i started with this design. It should be handy and reliable in daily usage for different spools and filament types. There was room for improvement especially for 2kg spools so there is…
The original snowflake design was extremely difficult to print. I think it had to do with the strange angles of some of the arms of the snowflake. I was getting lifting with PETG. I completely redesigned it on fusion 360. Here is my…
Last version of my own version of a sturdy all around spoolholder! - One that fit them all - (almost) You can keep it on the table or on a shelf, fix it on the wall or even hang it upside down. I use this with small spools and big spools…
This filament runout sensor is designed to provide reliable detection of filament depletion during 3D printing. Featuring a micro limit switch, the sensor quickly identifies when the filament has run out, preventing print failures and…
This is a redraw for the spring retainers used on Claghorn's open cable chain, which you can find here: https://www.thingiverse.com/thing:611593/comments The original design is awesome, however I had a lot of issues with 1st layer…
This version is operatonally derived from my earlier "Reliable Filament Runout Sensor" ( https://www.thingiverse.com/thing:2483919 ) from last year. Both versions are designed to mount on a 2020 bar which can be part of the printer or…
[ Edit Feb 27 2018: See also the recent (and still more thorough) "Even More Reliable Filament Runout Sensor and Spool Holder" -- https://www.thingiverse.com/thing:2809260 ] Here is my design for a more reliable filament runout sensor,…
A simple filament clip preventing filament from unwinding. I've tested many filament clips that can be found here but none of them did the job without some compomises so I designed one for myself that: Is not below 1 mm thin and don't…
(Example photo is a test print while I worked out the design and colors with the patron.) A regular patron for our library requested a custom sign to hang up for his local business. I only have access to the PrusaSlicer program for any 3d…
I remixed @#D_dani model to fit my existing 8mm ID bearings and my endstop type runout sensor.
I built my own enclosure for my ender 3, but wanted a drybox extruder, I liked the price, availability and size of the sertilite 20l/q gasketed box. This system is meant to rest with the lid down on top of an enclosure or desktop I used…
Dimensions Plant base: 75mm x 75mm x 80mm Nex (planter): 100mm x 100mm x 100mm Enjoy!
A remix of an existing TPU case for the Fairphone 5. I removed the hole over the On-Off-Button and instead added a (separately printed) PETG button that can be glued onto the TPU case itself. This should eliminate the issue of the…
These curtain loop gliders provide smooth and reliable movement inside curtain tracks. Perfect as replacement parts or for new curtain installations. Their compact design allows curtains to slide effortlessly, making opening and closing…
I printed LOVE23DPRINT's Flexi Rex for a friend and immediately got asked for MORE - but found out that they didn't always print reliably, the smaller parts coming unstuck from the bed and shifting about ¼ of the way through the print. I…
A simple filament clip preventing filament from unwinding. I've tested many filament clips that can be found here but none of them did the job without some compomises so I designed one for myself that: Is not below 1 mm thin and don't…
Howdy guys and gals! I wasn’t quite satisfied with the garden sprayers I could find in the store, so I made my own! It has an integrated stake and features 8 small streams that spread to a little more than a 12" diameter. It puts out a…
I tested different clips without success. Therefore i started with this design. It should be handy and reliable in daily usage for different spools and filament types. There was room for improvement especially for 2kg spools so there is…
I made this because I did not like existing spool holder designs. They were either unstable/tippy when loading (easy to knock over) or not adjustable enough. This design solves both issues. So far it has been simple and reliable. Its been…
