Wyniki wyszukiwania: repair

Sortowanie

2611 modeli

P
Printablesguss67

Ethernet | RJ45 clip to secure/repair/fix broken tab

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…

Pobrania
21 963
Polubienia
7496
Ocena
4,84
P
Printablesjan

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

Pobrania
16 669
Polubienia
4370
Ocena
4,68
P
PrintablesCarletes359

Ethernet RJ45 repair fix with NO SUPPORTS

Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…

Pobrania
2149
Polubienia
414
Ocena
4,53
P
Printablestm108

Ethernet RJ45 Repair

This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports

Pobrania
1813
Polubienia
275
Ocena
4,62
P
PrintablesBP3D

Toilet Flush Lever Repair Kit (Straight & Angled) (American Standard) (No Supports)

All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…

Pobrania
1013
Polubienia
126
Ocena
4,73
P
PrintablesBodo

IKEA drawer support bracket repair - screw-type

What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…

Pobrania
845
Polubienia
122
Ocena
4,95
P
PrintablesmoWerk

Hose Coupler | Water Line Extender | Zip Tie Tubing Repair Connector

Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…

Pobrania
836
Polubienia
339
Ocena
5
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock

An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…

Pobrania
817
Polubienia
66
Ocena
4,83
P
Printablesvindolin

RJ45 Ethernet Cable Clip Repair - parametric

Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…

Pobrania
796
Polubienia
96
Ocena
4,93
P
PrintablesArczi

2x AA Battery Box for Repairs

Modification of the model by Plutho to accommodate two instead of three AA batteries. This model may need to be customized as needed.

Pobrania
717
Polubienia
81
Ocena
4,8
P
PrintablesLopatka

Toolbox for 3D Printer Repairs

This is a large, useful toolbox for small tools and parts. I use it for repairing my 3D printers because of all the small parts and tools needed. I have several printers that are used a lot. Anyone that really puts their printer to good…

Pobrania
652
Polubienia
64
Ocena
5
P
PrintablesRylie Pavlik

90 Degree Right-Angle Bracket for household repairs (#6 screws, customizable)

While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…

Pobrania
613
Polubienia
67
Ocena
5
P
Printablesxyz

RFID Chip Repair Case

An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…

Pobrania
598
Polubienia
47
Ocena
4,8
P
PrintablesAtkc001

Field Repair Buckle

Description: A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 19mm…

Pobrania
409
Polubienia
207
Ocena
0
P
PrintablesMichaelKroes

Screen repair clamp

You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…

Pobrania
390
Polubienia
32
Ocena
5
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock for sideways print

An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…

Pobrania
381
Polubienia
28
Ocena
5

SureFeed MPF001 Lid-Opener Repair Part

Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…

Pobrania
368
Polubienia
5
Ocena
0
P
Printablesdirrgang

Beyerdynamic Slider Repair Kit

Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…

Pobrania
353
Polubienia
18
Ocena
5
P
PrintablesAlessiodral

Bike repair stand (gravel or racing handlebars)

The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.

Pobrania
298
Polubienia
47
Ocena
0
P
Printablesrbid

Repair/Replacement for a Salomon Sky Boot Heel

1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…

Pobrania
258
Polubienia
20
Ocena
5
P
Printablesdarthvader85

Tupperware Speedyboy Repair

In our rotational Cutter from Tupperware the gear which transports the force to the knife's broke. So i designed it as close as possible to the original one. Fiirst i printed it in PLA but it not last for a very long time. So i decided to…

Pobrania
162
Polubienia
18
Ocena
5
P
PrintablesBas

Siemens EQ 6 milk frother tube holder repair

It is a waste of money (23 euro incl shipping) and material to buy a new drip tray, because it is only for the looks.

Pobrania
152
Polubienia
8
Ocena
0
P
PrintablesR4V3NH4

USB-C cable plug repair

A repair "kit" for USB-C plug casing. Depending on how much of the casing is missing, print “USB-C_cable_plug_repair_additional”. If only one side broke of then you can skip “USB-C_cable_plug_repair_additional”. Please also note the…

Pobrania
150
Polubienia
25
Ocena
4,5
P
PrintablesJB

Radiator valve repair - FRITZ!DECT 301

My FRITZ!DECT 301 Radiator valve plastic connector circle broke after it got hit to often. First I gave it a kick and then my kids made the rest. The radiator is in a small room and so it is quite easy to oversee, when you bend over to…

Pobrania
112
Polubienia
9
Ocena
0
P
PrintablesKaktus22

Window handle repair set

Window handle repair set

Pobrania
78
Polubienia
14
Ocena
0
P
Printablesmichael9q

LEKI SpeedLock Lever Repair

Replacement for LEKI CorkLite SpeedLock Lever

Pobrania
50
Polubienia
3
Ocena
0
P
Printablesdjedje_zr7

Peugeot 307 SW ventilation flap repair

Glue the two parts together and replace the old one with the new one.

Pobrania
47
Polubienia
5
Ocena
0
P
Printableshugodrax

Park Tool Deluxe Repair Stand Tool Tray for PRS-2 & PRS-3 (No hardware needed)

This print fits Park Tool PRS-2 & PRS-3 Repair Stands with a 44.25mm (as measured) column. With an interior print of 44.5mm the press fit design has enough friction to stay in place without hardware. It has space for the following items:…

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesMBLX

Motorhome Window Blind Repair Kit

Commonly failing plastic components in motorhome window blinds can be a persistent issue. This repair kit provides a durable, 3D printable solution to replace worn or broken parts, restoring full functionality to your blind system.…

Pobrania
45
Polubienia
12
Ocena
0
P
Printablespictorf

Christmas ball decoration repair

The hook/hang of this poor little christmas decoration ball was broken. The ball was lost unless I make a new hook. Printed with out support, in PLA, 200 µ layer height. Very simple and straightforward.

Pobrania
44
Polubienia
12
Ocena
5
P
Printablesingemar.fast

Klick fix repair

The clamps holding my 25 odd years old Klick fix attachment to the handlebar broke. I found it was quite easy to print a replacement. Print with PETG, flat on the bed. Use roughly 6 perimeters to make it strong.

Pobrania
37
Polubienia
6
Ocena
0
P
PrintablesDomasschwarz
Pobrania
34
Polubienia
3
Ocena
4,5
P
PrintablesRPK

Blood pressure monitor hose connection repair

EN: Yesterday, the connection piece of the hose of the above-mentioned blood pressure measuring device broke off. A replacement was needed. Here is the result. It works. Could be that it also fits other devices. The inner diameter…

Pobrania
34
Polubienia
0
Ocena
0
P
PrintablesH3dSprint

Repair adapter for safety glasses - Hoffmann Group / Holex

The part is printed with PETG. Print instruction: supports: YES | default setting recommended layer height: 0,2mm nozzle diameter: 0,4mm brim: YES (recommended to ensure good adhesion on the print bed) enclosure: NO Assembly instruction:…

Pobrania
32
Polubienia
5
Ocena
0
P
Printablesrejnok

VAG old 4pin petrol pump connector repair lock

Vytvořeno na opravu ulomeného zámku 4pin konektoru Fabia 1 (6Y5) palivového čerpadla. Mělo by být kompatibilní s dalšími starými modely koncernu VAG (VW/Audi/Seat/Škoda)

Pobrania
31
Polubienia
7
Ocena
0
P
PrintablesMaVeRa

Repairing a Broken Base Cap, LOCKSYS Key for House Door

Hello! Have you ever broken the plastic part of a similar key that you use to unlock your front door at home? If so, you know how much it costs to have a duplicate made. No worries, because with this model, in about 10 minutes, you can…

Pobrania
28
Polubienia
6
Ocena
0
P
PrintablesGNDconcept3D

shower mount repair

i design it to repair my shower, work by adding teflon on the thread to make the thread water tight SUPPORT NEEDED use 99 wall to print it to make it watertight and use heat resistant filament idealy

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesMitchell Takes

Miller Welding Helmet Adjustment Repair

Our Miller welding shield's side adjustments broke, so we printed a new part and installed it in under an hour. It is always a good idea to keep consumables around, even small simple pieces like this, so that you minimize downtime in the…

Pobrania
23
Polubienia
8
Ocena
0
P
PrintablesZigzain

SBACH 342 EPO rudder repair kit

SBACH 342 EPO RC airplane repair kit for rudder mounting rudder mount for 12x16mm hinges back wheel steer base For 12x16 mm hinges If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…

Pobrania
20
Polubienia
5
Ocena
0
P
PrintablesRoy Damann

Headphone Swivel Arm Repair/Fix

Print out of something strong like PETG, ABS etc. Doesnt need to be perfect so .20-.25-.30 layer heights would all work, but the smaller the stronger… I printed with 100% infill and support on the upper pin.

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesMagig_I3Prusa

Cristmas LED Defusur REPAIR Translucent

As the Xmas nears all the Time things go missing or Broken so i decided to start to repair EVEN translucent Glass like things as here the LED-Defusor of a Christmas Star Top so it looks great as from 1m as you normally look at your tree…

Pobrania
19
Polubienia
3
Ocena
5
P
PrintablesTeraflop

Farberware Vegetable Peeler Blade Repair

This is a replacement for the Farberware vegetable peeler part that holds the blade. The old blade is use in the replacement part and a pause in the g-code allows the blade to be inserted into the part as it is being printed. The…

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesPelex

Levelor Repair Clip

I developed this repair clip as a remedy for your broken Levelor-branded vertical blind “vanes”. I was growing frustrated to find these vanes lying on the floor after randomly breaking at the attach holes. The vanes have a habit of…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesBM

Trailer hook FALK repair

The two parts can be screwed together with threaded rod M4. then can be inserted in the hole made by the broken hook and rotated 90° to secure it. You will need to make 2 small indentation in the tractor chassis to allow the securing form…

Pobrania
15
Polubienia
3
Ocena
0
P
Printablesjcjames_13009

Deckchair wheel repair

It's time to prepare summer. Doing it last weekend I discovered that one of the wheel of one of my old deckchair was damaged. It wasn't possible to securely repair it using glue and as usual no way to find replacement or a cheap part that…

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesishikawats

Kite Repair - Dihedral Cross Joint

I made this to replace a broken cross connector on a cheap "dollar store" type of kite (from Søstrene Grene in this case, many cheap kites are probably similar). Fits 3 mm glassfiber rods. The cross joint has a 12° dihedral angle, not a…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesL'éclaire31

Week A&B Hideout / Repaire semaine A&B / Woche A&B Versteck / Escondite de la semana A y B

This is a model to help you find your way between week A and week B. Il s'agit d'un model pour se repérer entre les semaine A et les semaine B. Dies ist ein Modell, das Ihnen dabei hilft, sich zwischen Woche A und Woche B zurechtzufinden.…

Pobrania
14
Polubienia
1
Ocena
5
P
PrintablesCristi

Shower support - repaired part

I have a broken shower holder with an oval hole for the main support bar. So instead of creating a new support I just create a new part for the actual one. It's a niche project, I still hope that someday it will be useful to someone.

Pobrania
13
Polubienia
0
Ocena
0
P
Printablesdjedje_zr7

Lone Rider Motobags clip repair

Remove the broken clip Put the new one and glue the 2 parts

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesIngoBingo3k

Whisk Head Repair and Replacement piece for the Arendo Milk Frother Mini Milk Star (parametric)

This is a replacement part for the attachment of the stainless steel wisk head for the Arendo Milk Frother 'Mini Milk Star'. The original attachment is of weak design and after 1-2 years of every-day use, it breaks. I replaced it already…

Pobrania
11
Polubienia
3
Ocena
0
P
Printablesdwsharp

Repair Stand Work Tray Accessory Adapter

The PCS-10 line of Park Tool Repair Stands have a collar with “receiver pods” to hold the 106 Repair Stand Work Tray. The work tray also has "receiver pods" to hold tray accessories, but they are spaced more closely together than on the…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesJohn 14:6

M18 Battery Pack Cell Remover - For Repair

Made this to make cell removing easier on my fingers and not use a metal tool and make sparks! Especially when they use rubber spacers made for the old 20r cells and put 25r cells in it. A bit tight!!

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesTMBG

Rittal filter housing latch repair

This part was designed to fit on the Rittal 3243200 outlet filter housing. Its purpose is to repair instead of purchasing a complete new filter housing. 2 perimeters, 40% infill It fits snug on the remaining ”lip”, this version needs to…

Pobrania
8
Polubienia
1
Ocena
0
P
Printableswinqooq

Repair plastic for stock KuKirin G4 foot

add some solidol/lithol inside so that it does not jam the spring P.S: I recommend drilling to 6 mm and using M6x25 screws and accordingly nuts

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesGraubart

Hama Keyboard repair foot

Lost one foot for the Hama K210 Keyboard - so I made two new ones. The slot with for the foot is approx 18mm In case this is useful for you please leave a like

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesZigzain

SBACH EPO wing mount repair kit

SBACH 342 EPO RC airplane repair kit for wing mounting plate for insert nut plate for 5mm nylon bolts For 5mm bolt and 5mm nut If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★ Thank…

Pobrania
5
Polubienia
0
Ocena
0
P
Printablesdjedje_zr7

Ocarina MP3 Repair

Assembly instructions: Disassemble the old Ocarina MP3 player. Keep the 4 assembly screws. Cut out and glue a new screen (recovered from a piece of transparent plastic) (27 mm × 53 mm). Place the PCB in the “Back” part. Slide in the 2…

Pobrania
3
Polubienia
2
Ocena
0
P
Printableswerz 99

Mobile personal protection for electrical repairs

Project from heise Make Magazine DE6/26 - https://www.heise.de/select/make/2026/6/2625115295311558604 For original parts see: https://github.com/MakeMagazinDE/Personenschutz Components I used : Control lights:…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesAtkc001

Repair Buckle All Versions

A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 20mm strap 25mm…

Pobrania
6521
Polubienia
3625
Ocena
4,8
P
PrintablesJohn Wayne

Furniture hinge repair plate

Body hinge requires widening the hole to 10mm. Door hinge to 8mm. The screw spacing in the door plate is 45mm, and the offset relative to the box axis is 9mm. The screw spacing in the body plate is 32mm. The thickness of the tiles is…

Pobrania
5965
Polubienia
3446
Ocena
5
P
PrintablesHans Schulz

Fallout 4 X01 Power Armor repaired

The X01 Power armor from here: https://www.thingiverse.com/thing:1284097 Repaired using MeshLab and Microsofts Repair service. Category: Creatures

Pobrania
4380
Polubienia
423
Ocena
4,56
P
PrintablesMici

DUMMY 13 - Frame repair pack

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I don't always need a complete set, but just individual pieces because I need to replace parts or want to print parts…

Pobrania
3387
Polubienia
579
Ocena
5
P
PrintablesJohn K

RJ45 Ethernet Cable Clip Repair

These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…

Pobrania
3234
Polubienia
1110
Ocena
4,79
P
PrintablesGunter

RJ45 Ethernet Cable Connector Repair

This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…

Pobrania
2946
Polubienia
1272
Ocena
5
P
PrintablesDusanMerta

Bike repair stand

You can put them on the handlebars in the normal position and turn the bicycle afterwards. They are designed for the handlebar with a diameter of 23 mm . I printed them with 4 perimeters, 15% honeycomb infill, without top and bottom…

Pobrania
2411
Polubienia
520
Ocena
5
P
PrintablesLloyd Keays

Slica dry box for Bambulab AMS fitting the roller repairs suggested by bambulabs

My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…

Pobrania
2375
Polubienia
216
Ocena
4,97

Screw Organizer Box for Repairs & Disassembly

🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…

Pobrania
2208
Polubienia
711
Ocena
5
P
Printableshkern0

Button - Parametric customizable OpenSCAD (SCAD) clothes repair sewing buttons

Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…

Pobrania
2164
Polubienia
519
Ocena
4,95
P
PrintablesTheOvenCook

Swan (Repaired)

Swan, with a small support built in to hold the nose without any extra supports needed

Pobrania
1984
Polubienia
93
Ocena
4,83
P
PrintablesMehStrongBadMeh

Steam Deck Repair Jig Fixed

A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…

Pobrania
1958
Polubienia
329
Ocena
4,93
P
PrintablesLenny421

Thailand Buddha - Repaired and flattened

'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…

Pobrania
1940
Polubienia
114
Ocena
5
P

IKEA BLALIDEN / BLÅLIDEN Shelf Bracket Adapter for Glass Cabinet Repair Part 10087158 / 10082805

You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…

Pobrania
1716
Polubienia
64
Ocena
4,67
P
PrintablesDzyn3D

Bag strap buckle tidy / clip - replacement, repair or retro fit any bag (fully parametric!)

After breaking and losing a bag strap buckle and searching for a 3d design to print and replace it, I realised that a fully parametric replacement strap buckle clip thing would be really handy, so I could … retro fit it to fix the one I…

Pobrania
1605
Polubienia
364
Ocena
5
P
Printablestljuniper

Repair Clip for Clothes Drying Rack - 190 Sizes

Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…

Pobrania
1601
Polubienia
1055
Ocena
4,78
P
PrintablesMartin Duhayon

Beats Studio 3 Repair Headband Replacement Part

The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…

Pobrania
1246
Polubienia
129
Ocena
5
P
PrintablesViktor Fortun

xbox series controller 1914 bumper repair fix

i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…

Pobrania
1232
Polubienia
66
Ocena
4,43
P
PrintablesMici

DUMMY 13 - Frame repair pack with runners per part - V1.0

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 This time I take a different approach to printing the difficult frame parts and use runners not to connect different…

Pobrania
1180
Polubienia
142
Ocena
5
P
PrintablesHeine Sørensen

Auto repair pry bar tool

A little support is needed but comes off quite easy

Pobrania
1141
Polubienia
95
Ocena
4,83
P
PrintablesFlo

Tiptoi Book Binding Repair

Our kids love this books! Unfortunately the pages suffer from the extensive use. Especially the front- and the back-cover get damaged and ripped out by the binding, the cover separates from the rest of the book. Repair Instructions Print…

Pobrania
1133
Polubienia
65
Ocena
5
P
PrintablesMikyner

Flat Hinge repair-plate

This is a modified version of the design for the hinges we have at home. European hinges.

Pobrania
1116
Polubienia
573
Ocena
5
P
PrintablesMlee

K2 Plus Extruder repair

This extruder cover will fix the Creality K2 extruder that the Bowden connector is broken. I printed in ABS. This allows the Bowden tube to pass thru into the Bowden connector of the extruder. You will need one PC4-M10 fitting. 2 M3 30mm…

Pobrania
1072
Polubienia
123
Ocena
5
P
PrintablesAndun_HH

Repair set for broken drying rack with M4 threaded inserts

Repair set for broken drying rack with M4 threaded inserts I saw the repair kit for the broken strings on a drying rack by STxS . I tried it and it fitted for my drying rack. This remix replaces the M4 nut holder with threaded inserts,…

Pobrania
1048
Polubienia
701
Ocena
5
P
Printablespops

Phone / Tablet Disassemble & Repair Tool

Easily 3D Printed tool that is used to remove adhesive between two parts that have tight tolerances between them and are fragile. Most commonly used when removing touch screen from an phone or tablet. IF YOU HAVE A RESIN 3D PRINTER I…

Pobrania
1025
Polubienia
75
Ocena
5
P
PrintablesDavid

BMW E46 Windshield Cowl Seal Repair

Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…

Pobrania
944
Polubienia
163
Ocena
5
P
Printablesrebeltaz

AR15 - Repaired, Modified, and Split

Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…

Pobrania
936
Polubienia
103
Ocena
4,75

Rope Bowl (repaired)

I got annoyed the original model by @JamesThePrinter, cool as it may be, isn't manifold so I fixed it.

Pobrania
918
Polubienia
103
Ocena
5
P
PrintablesDennis Renken

Snapmaker U1 Toolbox Tray - Repaired & Optimized for Snapmaker U1 Starter Spools

This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…

Pobrania
907
Polubienia
80
Ocena
5
P
PrintablesKuki Mini

Ender 3 V2 belt tensioner repair

I recommend printing it in ABS, but PLA and PETG will work just fine. Its designed to be printed supportless, when you print it like a tower.

Pobrania
904
Polubienia
105
Ocena
4,45
P
PrintablesTenthrow

Nintendo Switch Joycon Drift repair spacer

This is a spacer meant to be used to repair joy con drift using the method shown in this video: https://www.youtube.com/watch?v=Vid8lIXmZwE Instead of cutting cardboard and that imprecision, you can just print this spacer instead for that…

Pobrania
902
Polubienia
286
Ocena
4,76
P
PrintablesCrazyMason

Doom Guy Collectible Figure - Repaired

Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…

Pobrania
884
Polubienia
131
Ocena
4,86
P
PrintablesAxnarc

Sony WH-CH720N Repair

This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…

Pobrania
873
Polubienia
30
Ocena
4
P
PrintablesGeorgi

Monarch butterfly (repaired)

Long time ago I wanted to make a realy nice monarch butterfly. The butterfly was printed with PLA 1.75 mm (GD Filament). As I uploaded the colored 3mf file - you can simply swatch the colors as per your wish and simply print it - you dont…

Pobrania
844
Polubienia
62
Ocena
5
P
PrintablesDziobaasty

Geekvape Aegis legend 2 510 connector repair

Geekvape Aegis legend 2 510 connector repair

Pobrania
791
Polubienia
16
Ocena
4,75
P
Printableschrism

Bicycle / Bike Repair / Assembly Stand

Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a…

Pobrania
789
Polubienia
190
Ocena
5
P
PrintablesBuildX

#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…

Pobrania
772
Polubienia
96
Ocena
5
P
PrintablesGreg M

Sony WH-1000XM5 arm repair

One of the arms on my Sony WH-1000XM5 headphones snapped. This print clamps over the arm, using 3 M3 nuts, and 3 M3 8mm cap screws to hold it together. The arm on mine broke with conveniently ragged edges, so alignment was very easy. I…

Pobrania
766
Polubienia
42
Ocena
5
P
PrintablesTreba Ales

Repair mat

A simple mat to help you organize your parts while repairing.

Pobrania
753
Polubienia
240
Ocena
4,83
P
PrintablesDuDynasty

Ikea Hinge Repair Plate

The hinge on my Ikea Kleppstad cupboard tore out of the wood. I could not find a repair plate for this specific hinge. The hinge is also used on Billy cupboards in some regions. The hinge part number at Ikea is 109338 and the mounting…

Pobrania
711
Polubienia
392
Ocena
5
P
Printables3d uniprinting

Iphone repaired cable and protect Version Good ;)

- preferably nozzle 0.2/0.25 - PLA - NO SUPPORT!!!

Pobrania
709
Polubienia
77
Ocena
4,67
P
Printablesanjoze

Door repair kit for BMW E36 Coupe

Each part is about 21cm so it can be printed on almost every printer, rotated 45º. Just print it and glue it with some clips like in the picture. I've used T-Rex but I don't know if it is the right choice. A more detailed Instructable is…

Pobrania
689
Polubienia
82
Ocena
0