Wyniki wyszukiwania: repaired

Four (4) Letter Words - Naughty but OK - REPAIRED correct files loaded

REPAIRED correct files loaded scaleable and easy to print

CC2531 Zigbee Dongle Case Repaired & Split

Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)

Fallout 4 X01 Power Armor repaired

The X01 Power armor from here: https://www.thingiverse.com/thing:1284097 Repaired using MeshLab and Microsofts Repair service. Category: Creatures

Swan (Repaired)

Swan, with a small support built in to hold the nose without any extra supports needed

Thailand Buddha - Repaired and flattened

'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…

AR15 - Repaired, Modified, and Split

Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…

Rope Bowl (repaired)

I got annoyed the original model by @JamesThePrinter, cool as it may be, isn't manifold so I fixed it.

Snapmaker U1 Toolbox Tray - Repaired & Optimized for Snapmaker U1 Starter Spools

This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…

Doom Guy Collectible Figure - Repaired

Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…

Monarch butterfly (repaired)

Long time ago I wanted to make a realy nice monarch butterfly. The butterfly was printed with PLA 1.75 mm (GD Filament). As I uploaded the colored 3mf file - you can simply swatch the colors as per your wish and simply print it - you dont…

Iphone repaired cable and protect Version Good ;)

- preferably nozzle 0.2/0.25 - PLA - NO SUPPORT!!!

Mermaid Corbels - Repaired

I loved the look of these Mermaid Corbels (I didn't even know what a "corbel" was before I saw these!) uploaded by @darkside501st but when I went to print them, all three threw up errors in Cura, with the left being the worst. The left…

Saturn V with stages (repaired and combined)

The files as is will not load into BambuSlicer. I used IdeaMaker to repair the files and then imported into BambuSlicer to check. After which I exported all the objects to .3mf and .stl formats to use as you will.

Anya spy x family Repaired- Mostly

Attempted to make the STL printable. I could get it pritable easy enough but it had Super thin walls and I cannot get it sealed so the printer doesn't see the Hollow inside. I thickened the model enough to allow at least 4 walls. It still…

Prusa Face Shield - Stack ver. repaired for Simplify3D

I had a problem printing it on Simplify3D so I repaired the model. Now you can print it without inner holes and errors. See pictures for details 4 headbands stacked on top of each other Print instructions 0.25 mm layer height 5 top 5…

Christmas elf Snappy - repaired

I added left and right sloped hats as well. Printed with PLA (GD Filament) on Prusa MK3S+.

Bioshock 2 Big sister - Repaired files

Fixed up all the missing mesh from original files. body is in the zip folder because the file was too large. Category: Video Games

Castle repaired

I repaired the castle. original https://www.thingiverse.com/thing:161975 Category: Buildings & Structures

Alaternative and repaired Coal load for Coal Wagon for Wooden Tracks

Repaired and improved versions of coal load for Coal Wagon for Wooden Tracks from Michal Franta . The motivation for making this remix was the wrong size of coal load in original Coal Wagon from Michal Franta. This model has right…

Raiders of the Lost Ark - Idol Scene - 1981 - REPAIRED

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Wednesday - Thing - Hand in 3 Types and repaired Mesh

Designed by Dnsblm on Thingiverse

Adirondack Chair Repaired

Repaired version of https://www.thingiverse.com/thing:15904 . I couldn't get the original to slice with Slic3r PE, so I repaired it with Netfabb. Print instructions Category: Model Furniture

Garden Gnome on a Bike Repaired and Reinforced

Fixed through netfabb as the original file had some internal gaps causing improper infill/support material use. Then added a bar between the handlebars as my first print had the left handlebar break off easily. Then added a small cylinder…

Baby Dragon (repaired)

The original look good but print bad, so i try to make it better. Print with more details and less support needed. Improvement to the original file : More details Smoother Erase some errors Make the tail and the belly in contact with…

Repaired Prusa RC3 for Cura Users

The original RC3 headband STL file had manifold errors that caused problems with the Cura slicer engine. This file is repaired and works with Cura (tested with V4.5). Print instructions Same as original, just repaired the mesh

Chibi Chocobo repaired

Found this awesome chocobo published by kijai . But it's not so well optimized for printing. Healed the model to one volume. By the way, included variant with supports for ABS (0.12mm layer), that's printed by me. Category: Creatures

"Cranium with Injuries", a 661 year old skull, 3d scanned, and repaired for printing

Based on the amazing scan “ Cranium with injuries - 260727 ” by Historiska , I took the published 3d model and manually cut out the “filler” geometry at the base of the skull, hollowed the model, and patched up the hole to print easily.…

Improved / repaired spikes for ReProps's "Majora's Mask from Legend of Zelda"

I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…

human tooth model (repaired)

This is a repaired and slightly modified version of "human tooth model" by Svenergy. The model is watertight and a 2 manifold. I've been told by someone with deep knowledge about human teeth that a tooth like this does not usually exist.…

High-Detailed Penis SheWee Repaired

The best Bambulab Glass Top Led Raiser mod - repaired slicing problems and added parametric setting

Remix of DutchDeveloper's ‘The best Bambulab Glass Top Led Raiser mod’ which has two issues: The slot is too close to the inside edge, causing slicer to generate holes in the wall. The slot fitment at 0.20mm is way too loose for my…

Tourist Duck repaired and larger

The model had faces inside which in my slicer came up as empty layers. So I fixed it and resized it by 160% Category: Art

Singin' in the Rain - 1952 - REPAIRED

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Shovel Knight - Repaired

Repaired the "Arm_L.stl", "Body.stl", "ShovelKnight.stl" files as per a request on Reddit. The files were showing error as not being watertight in Cura so repaired them. Category: Sculptures

Galileo 2 Extruder PG7 Mount (repaired)

The original "G2E PG7 Mount SB2040 3010 V1.5.stl" was not a single, solid design - parts of it were floating. I made some small tweaks to the Fusion 360 file (included) to make it a single, printable piece.

Spaceballs - Barf - 1987 - Repaired the Tail

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

OpenForge 2.0 Cut Stone Separate Low Wall - Gx, X, XA, XA w. door and repaired Q wall and X base

@devonjones excellent "OpenForge 2.0 Cut Stone Separate Wall Primary Walls" collection does not include some tiles which I needed myself. So, I created them by modifying some existing tiles. There are also parts in the original collection…

SD USB Organizer (Repaired STL)

This is a remix of thing:2644648 that repairs STL errors; loaded it in Microsoft 3D Builder, repaired, and saved the repaired model. This repair allows the slicer to properly make the four rearmost USB holes. Print Settings Printer Brand:…

The Birds - Rod & Tipi Porch Scene - 1963 - REPAIRED

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

(Repaired Thorax) Giant Vase Spider - posable halloween print in vase mode!

Just fixed the holes in the mesh of the thorax

Sweeney Todd - 2007 - REPAIRED

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Technoblade Memorial Repaired for FDM

Fixed DJScope's version to make it printable on my FDM. Prints at 3 1/2 inches tall or higher. Supports must be used! My daughter is a huge fan of Technoblade and I fixed this so I could print it for her. I make my fixed verson available…

MakerBot Replicator - REPAIRED CAD Files

Make a MakerBot! Replicate with a Replicator! This is the Original MakerBot Replicator CAD file. It is still available for download on Thingiverse HERE , but the files are missing some key components and it will not open properly in…

Sapphire Plus SP-5 Gantry Repaired

how you see from photo, are only about 3mm between rollers, WTF? Im asking myself, to get belts parallel must be 14mm or you get issue when make belts tight and X axis carriage are in position min, moving to max no possible, or if you…

Rode Videomic Me Lyre mount REPAIRED

"Rode VideoMic Me Lyre style mount by shiftline" is a mess on simplify 3D "Rode Videomic fixed coldshoe mount" has better looking coldshoe/hotshoe mount so i repaired and fusion them mount on cold shoe/hot shoe mounting Print Settings…

Omanyte repaired

I've just repaired crydrk's file so that there are no open edges. Praise Helix

Trackmania Nations Stadium Car (Repaired~)

ORIGINAL : https://www.thingiverse.com/thing:309517 The original model skipped layer on cura 4.0.0. So the model was repaired with 3D Builder (within Windows 10). All the wheels are filled for some reason. :/ 2022-02-07 - rip 3D Builder.

Quest 3 BoboVR M2 Adapter (Repaired Geometry)

Allows you to connect a Bobo VR M2 headstrap to the Quest 3/3S. I printed it at a 45 degree angle standing up on the bed with tree supports, so there is no major cleanup required.

Mesh-repaired Crater for 28mm Gaming

The mesh of the original crater was so broken that Cura outright refused to slice it. I cleaned it up in Blender and reduced the vertices count on the bottom. I also increased the height a little so that the crater bottom does not clip…

Repaired vacuum attachment

The original file had two bodies in model. This did not slice well in S3D so I removed the second body in meshmixer. Print Settings Printer: DIY Rafts: Doesn't Matter Supports: No Category: Replacement Parts

Candyman - 1992 - Repaired the Hook

Candyman 3D printable model. Easy to print, just adjust size to your needs and go!

Mermaid Corbels - Repaired

Since thingiverse can't seem to get their shit together and actually show the models that we upload under our profiles or in searches, this is the only way to get some models shown. If you want the files for the real model, you can click…

Fiat 626 With repaired Radiator and Reduced to 1/100

I wanted Jarlang's excellent Fiat 626 in 1/100 scale but when I reduced it and printed it the fine detail of the radiator bars collapsed into the space behind them. (Model on left in photo) I used TinkerCad to make a filler piece for the…

Wichita Keeper of the Plains - Repaired

'Keeper of the Plains’ statue located on the river near downtown Wichita, KS – as per original model description. Original model created by user “headwindh” on sketchfab, where they set the license as CC - Attribution

Makita XGT Track Saw Arbor Cover (repaired file)

a repaired file with no artifacting on the first layer

Intex Angled Water Jet Nozzle Remix - Repaired

simply repaired the original part because when imported to slic3r for printing, the upper third is completely missing. thx the designer and looking forward for testing in summer :) Print instructions Category: Sport & Outdoors Summary…

Fortress of Sacrifice, Complete Top Section (Repaired)

After printing the original model and having to assemble it I though a preassembled one might be useful. I HAVE NOT PRINTED THIS. PLEASE LET ME KNOW IF THERE ARE ISSUES WITH IT. I've remixed this to have the top tower complete for all…

Removable SKADIS basket | REPAIRED

Removable skadis basket | REPAIRED note: Unfortunately, the original file (on the left) is missing the pattern on the right side . The repaired version (on the right) has the pattern all over the model now! Original file with one half…

Repaired 1storage_core.3mf

As many have mentioned there is an issue with the 1storage_core.3mf file. I have just repaired it and posted the repaired file and gcode to help others not fall victim to the failed print I did.

Raspberry Pi Zero 2 W Case with Heatsink & GPIO Cutouts (LED Power/Ground) for Prusa Mini w/ repaired cracks

Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…

UPS Truck - Repaired Front Wheel

When assembling this most excellent model , I found that the front wheel wasn't manifold. Every time Cura sliced it, it would fill in the top as a solid, obscuring the hub. This is a repaired, manifold version of that front wheel. All of…

Repaired FrankenQuest Adapter / Oculus Quest DAS Mod

I found that the repaired DAS mod still had some errors in it. Took another stab at fixing those errors. Additionally, I cut off the bottom ~1mm to make for a larger build plate surface area so hopefully it prints OK without a brim.…

SCARBO SVF1 repaired parts

Repaired meshes if your slicer does not auto repair ( Simplfy 3D)

Coffee & Euro flap and Repaired flap 36 for Split-Flap Display by David Kingsman

I have made a remix of the $ flap and the # flap to provide respectively a € flap(flaps 28&29) and a 'coffee' icon flap (flaps 30&31). I have added a repaired version of flap 36. The little corner of the '5' on the bottom flap wasnt…

Cube Background Panels Repaired

Cube Background Panels Repaired with Netfabb

F.Lab's DIYbio Centrifuge Repaired and New Electronics

The STL files are just repaired so that they can be used with Slic3r. I'm using a Digispark instead of an Arduino for controlling the speed, you can find source and instructions at https://github.com/reefab/diybio_centrifuge Category:…

Magic Tracks - Repaired Gear - Réparation engrenage

[Scroll down for English version] Engrenage pour réparation d'une voiture Magic Tracks, au cas où l'engrenage n'est plus pris sur l'axe et se met à tourner autour de l'axe, la voiture n'avance plus. L'engrenage de remplacement est celui…

Tin-Tin Rocket center part with thread repaired

In the model from parufito was a gap between the center-part and a thread, making it unprintable. Add supports on printbed and it should work out even with 0.3mm height.

Repaired Iris Model for Bill Cipher of Gravity Falls TV Show Model

My son loves Gravity Falls, so I printed the original model for him. The iris model wasn't loading correctly for me in Cura, so I repaired it.

Medic-Repaired

Repaired in Netfabb Studio basic Dimensions: 0.85" x 0.28" x 1.64" (22mm x 7mm x 42mm) Category: Video Games

REPAIRED__raspi_bottoms__1_05-rpXXXXX - for Sneaks' Raspberry Pi cases

Please see Sneaks design for all information and instructions. When I loaded the __raspi_bottom__1_05-rp3bp STL file, Prusa Slicer noted 64 errors. When I loaded the __raspi_bottom__1_05-rp3bp-v75 STL file, Prusa Slicer noted 398 errors.…

John Deere Tractor repaired - Suspension broke

Suspension of left wheel was broke. So I designed a replacement and printed it. Kid happy, neighbor happy, me happy. Designed in TinkerCad, printed on my MK4 with Formfutura STYX PA6 (Nylon). The print was one of my hardest prints. Vacuum…

modern candlestick (repaired)

Inspired by: https://www.ikea.com/cz/cs/p/godtagbar-svicen-keramika-bila-70445673/

Repaired model of 1995-2001 ford explorer driver side door handle

As the description says. Print as oriented from PC, ABS, or PC/ABS blend, GF is a plus.. .2LH or smaller. 6 walls, 30% triangle infill.

Bau-Plättchen_Hälfte_2 - file with open slot repaired

open slot repaired in Bau-Plättchen_Hälfte_2

Quest2 Wall Hanger Remix v5 Repaired in 3D Builder

Previous version had slicing issues in Simplify3D. This version will slice properly.

Butterfly Balisong Comb Repaired

for EasyPrint

Small Case with insert for TC66C (Repaired)

FelixWurm_933065's original model only included the bottom piece so I extracted the top piece from the Fusion 360 file they included, and added my own insert for the TC66C USB-C power meter from AVHzY

Play-Doh Hamburger Press wrecked after 30 years. Now repaired!

After 30 years the lever of the press broke. I reengineered with TinkerCad and printed. Grand-kids have fun again. Printed on MK4. Happy repairing! If you like my post, explore my other Printables: https://www.printables.com/de/@Tritschi

WIi Balance Board (Repaired)

*Print flipped over* Print Speed: 250 mms Print Quality:1.5 mm

AR Drone 2.0 Camera Swivel Mount Mod - repaired

This is identical to http://www.thingiverse.com/thing:203968 , but with non-manifold faces fixed. It sliced/printed just fine for me on the first try with the "fine" setting in Simplify3D on my MakerGear M2 printer, no need to rotate or…

Repaired Décoration JUL Remix

I wanted to enlarge the model to print it (with my Ender 3V3 KE, 220x220mm bed) and I noticed a problem: the hands weren't perfectly attached to the base, there was a gap. That's why I fixed it with my remix. I also cut out part of the…

90 degreebraket Repaired

The origanal wouldn't 3d print so I fixed it in blender and now slices properly Category: Replacement Parts

Repaired pin for window locking handle

This is the pin I used to fix my window locking handle (Truth brand https://www.truth.com/products/Hinged-Window-Hardware/Locks/24-Series-Locking-Handles ) with 3D printed part. The video about this project is here…

Battery Dispenser Extension (Repaired)

This is the extension part of https://www.thingiverse.com/thing:399744 run through netfabb.com's repair service. It actually slices correctly with Slic3r now. For more information, see the original.

Shark Vacuum Pet Hair Turbo Brush Repair Sleeve (repaired)

Repair sleeve for shark pet hair turbo brush. Category: Household

Tesla Cybertruck (low poly) repaired

Philovance designed the new tesla cybertruck in low poly! It was really hard to sum up such a piece of art in few faces but I think he managed it :) And I just added some crucial features which has unfortunately been lost in the…

Bamboo Wind Chime [Repaired]

A wind chime in bamboo design.

Monolith Carriage for XOL/A4T 9mm belts repaired

Monolith Carriage for XOL/A4T using 9mm belts.

Repaired Pound Town Ticket

CymonBot repaired torso

Modified torso to have pins integrated- results in stronger connection and much lower chance of arms and legs snapping pins off body.

HTC Vive Desk mount (Universal) Repaired

Remixed HTC Vive desk mount - Simply ran through netfabb to fix STL errors. Looks good now. Category: Games

Lowpoly Skull pen holder for two color print remixed and bottom repaired

I am searching for a model to test my Ultimaker S5 dual colour print. Than I found this model an I liked it because the pens on my desktop need a home :-) . By slicing I could see that there is a problem on the bottom layer (u can see it…

Cooler Box repaired

My brother's coolbox handle broke due to overload. I took rough measures and rebuild the broken joint in TinkerCad. Few test objects to check the complete design, then printed the replacement part, mirrored for right and left version.…

CSM camshell collar-3-posts (repaired)

Fixed CSM camshell file for the 3-post collar that printed in 2 halves

Repaired GEN2 Honeycomb Filament Sample Tray

I was having a weird issue in Cura when slicing the Honeycomb version of the Filament Sample Tray. I imported it into Fusion360 and messed around for a bit stitching the various face groups around the problem area on the model. It seems…

Chancellor Chess piece (repaired)

The chancellor is a fairy chess piece that can move like rook and like knight.

Shower support - repaired part

I have a broken shower holder with an oval hole for the main support bar. So instead of creating a new support I just create a new part for the actual one. It's a niche project, I still hope that someday it will be useful to someone.

Cube Background Panel Repaired

When I tried to print original panel in BambuStudio with top surface ironing, some of the surfaces were covered with brides. I fixed the model in Fusion360 and it slices perfectly after that.

New Bright RC Tumble Bee - Repaired Wheel Gear

Repaired wheel gear (on photo, original is white, printed one is brown) for this toy. Fits the same screw as the original one. It might be printed horizontally to make it more resistant to the rotation strength. Print Settings Printer:…