14 958 modeli
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Wydruk około 3,72 €–4,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Wydruk około 7,37 €–9,00 € nettoWstępna wycena jednego wariantu
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some users may find the +/- variants fit their machine's alignment marks and materials better than others. Luckily, these are quick to print and easy to swap out! I like to keep spares around as well. For ~$0.50 for a set of 2x5sizes, why…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.
Wydruk około 4,47 €–5,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
The clip on my Skoda Fabia has broken for the second time. I drive on a route where the sun often hits from the side/front. The cover, metal clip, and screws are reused from the original. The model requires a support structure and should…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My daughter is a big fan of the Monster High dolls, and sometimes she manages to brake their legs, arms or hips. Daddy to the rescue to fix them :) This is a knee articulation replacement should fit all (?) with some preparations. Print…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Replacementpart for PSU from Prusa MK4. If you want to place your PSU not on the foreseen place you can use these replacementpart. For example if you want to place your PSU outside of an enclosure. Recommend to Print in temperature…
Wydruk około 5,75 €–7,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
Somehow we manage to lose one of these hinges, so there was either designing/printing a new one or buying the whole trashcan again. We opted to for the harder way :-) There is a left and right variant, so look at which one you have…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
This is a replacement coupling hook&spring for Playmobil wagons. Printed in ABS the spring is stiffer than the original Playmobil piece, but that also means the wagons are less likely to accidently uncouple. The uncouple-lever was left…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This model is a replacement casing for a USB-A SanDisk Ultra-Fit. This holds the tiny circuit board. The tight fit allows this case to be used without glue. The Fusion 360 parametric model is included if your printer requires different…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have printed them with 100% infill. So far, they have proven to be surprisingly robust.
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Wydruk około 7,61 €–9,30 € nettoWstępna wycena jednego wariantu
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
Wydruk około 6,87 €–8,39 € nettoWstępna wycena jednego wariantu
Replacement for backside part of VW Multivan T4 cup holder
Wydruk około 2,97 €–3,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have this flash drive with broken slider, you can make simple case and continue of use it. PETG, 2 perimeters.
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu
This is a replacement for the feed door on the back of the Bird Buddy Bird Feeder. This replacement features hooks on the sides that keep the door from falling open when refilling with seed. This model prints in 3 parts, one for each side…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
It would be nice if you post your make. Thank you
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…
Wydruk około 2,65 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
II like the Prusa Printables spatula, but I didn't like reprinting the whole thing when the edge gets dull. I can also print the blade with a more durable material. There are 2 notches in the bottom at the seam to use a small screwdriver…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Just replacement of broken power button.
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.
Wydruk około 4,02 €–4,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We had a hose clamp break on a Platypus water filter. I had one on another filter (black one) to work from, so I designed a replacement to match the original (white one). The textured part was add using paint on fuzzy skin. You can…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a replacement golf ball retriever head that can be connected to the extendable 10mm diameter aluminum hollow post. This model is useful for pulling balls out of creeks and ponds. Assembly This model can be slid onto the end…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is my design of straightforward replacements for wooden dowels. I created them for the FFF process to print them using PLA or PETG material. If these dowels are printed with the described settings and in the correct orientation, they…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
This is a replacement for the large red gear in K'Nex toy sets, and includes the hooks and holes for the pink/brown clip to fit into, as well as smooth teeth to mesh cleanly with chains or other gears. This appears to be K'Nex part 90985.…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a collection of 3d printable caps to replace the metal ones on a Canon New F1 WARNING: THE PLASTIC PARTS ARE FRAGILE, YOU NEED TO SCREW THEM IN GENTLY WITH THE LARGER TOOL YOU CAN FIT. Otherwise, you'll have to dig plastic out of…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This part is to repair a workshop broom. The part is the plastic connector between the brush head and the handle. The broom is sold by a uk company called Jewsons. When making the model I increased the thickness of the material around the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I frequently lose the movable part that enhances the grip on the tip of the Spring Clamp I use at home. This campaign motivated me to try printing replacement parts. ・I tried searching on Google Photos for the model number of this Spring…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slightly inspired by this model (https://cults3d.com/en/3d-model/naughties/foreplay-dice), except when you try print text that is embosed to an angled side of the dodecahedron it looks like shit unless you make the dice really huge. Only…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
A while ago, I lost the metal key to my Mercedes car key fob which is already a pain enough, but this meant I couldn’t clip it to my keys as the split ring attachment was on that key. As this was problematic, I needed to come up with a…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in ABS with 100% infill
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Samsung XCover 4s is marketed and sold an a rugged “outdoor” mobile phone. In spite of this claim, the case of my own phone (and, for the record, several others at a client's site) quickly showed signs of deterioration. Fissures…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A piece for replace your lost tracks connector
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Breville Tamper 3D-Printed Replacement Part Overview Is your Breville machine missing its tamper, or has the original one seen better days? Look no further! This 3D-printed Breville Tamper is designed to match your Breville espresso…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of KIA car key remote replacement, added symbols to buttons. Added gcode is ready for 2 colours without MMU. Printed in PETG.
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The story behind these sliding hooks/gliders (in Romanian: glisiere pentru călăreți agrafe de perdea) is born out of necessity and frustration. After several of my original curtain gliders broke, I embarked on a seemingly endless quest…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case. I remixed the stl on Sketchup,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this in Fusion 360 to fix the broken button on my Air Canada carry-on, and avoid having to buy a new one. Printed in PETG on Prusa mini, using supports underneath to print “upright” as it would be installed. I recommend printing…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Wydruk około 10,50 €–12,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If a padeye on your kayak breaks or is lost then this is can be a useful replacement. In addition to the printed part you will need an eye bolt to screw into the center hole; I used ¼" with 20 threads per inch in this design since that is…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Accessories: 1x M8 screw with cup head 100mm 1x M8 lock nut with nylon insert Print instructions Printable without supports. STL: https://www.myminifactory.com/object/3d-print-86835
Wydruk około 2,59 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The core for my standard 3M tape dispenser broke, so I figured I'd create my own replacement. Turns out it's a common enough problem that these things are sold on Amazon… go figure. =) Will need support during printing given it's design,…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A replacement for the paper section of the Remembrance Day Poppy. It is a fast under 20min print and is intended to be printed with 0.05mm layer height
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement part for the inner part of a remote control of the Blanco Elon kitchen sink. You can find this part and the corresponding parts with the item number 119 293 for about 18€ or you can just print this part. I created…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Tired of Hearing your Ender5-Plus sound like a jet engine? do you feel like every day, all you hear is tinnitus ringing in your ear as you sleep? FEAR NOT, for I have blessed you the file and setup you need to do in order to make your PSU…
Wydruk około 10,62 €–12,98 € nettoWstępna wycena jednego wariantu
Background As the uploaded pictures show, the knob on my OLFA model L-1 utility knife broke. Rather than throw the knife out, I opted to create a replacement part myself. This part is more interesting than it looks, it's doesn't just set…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
UPDATE Added a V2 - a complete remodel but only in the shorter length for now My daughter came home yesterday and had broken the arm of her glasses at school. She wears Tomato Brand glasses, and these things are meant to be tough but…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement kickstand for Supcase UB rugged case for samsung galaxy s21. From what I understand, this should work to replace the kickstand on other rugged supcase designs and cases that are just rebrands of this case since they use the…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multiple knobs from my Frigidaire drop-in range were broken in various degrees. Replacements are expensive, so I modeled this myself in Fusion 360 with measurements taken from a mostly working knob. I printed mine in ASA/ABS for heat…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
Car door clip replace (307SW peugeot) (original is in picture)
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The plastic pods tend to break ; and if you are buying seeds instead of the plant capsules you might need this ! My daughter has 2 modulo nano gardens - that's 8 pods total ! This is not an exact replica of the original pods but it's the…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
A friend had a broken dash panel on his old Hilux and wondered if I could replace it. A bit of 3d modelling later and it fits perfectly. I printed this .8mm thick, with two bottom layers in white and two top layers in black, and then…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
A quick Remix to add the logo of Royal Enfield.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The plastic piece that holds the shock mount for my microphone onto my boom arm just snapped in half, and I just hastily taped it back on with gaff tape for a while. I just decided to whip up something to replace it in f360. This is one…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Overview I needed to replace one of the little rubber feet that holds the front flap of the cargo cover in place in a 2009 Subaru Forester. I found this design and printed it but decided to make a few changes to make it easier to insert…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This applies to popular and cheap Decathlon scooter. Original part got broken and no replacement parts are available by Decathlon. This mudguard serves as brake so without it the scooter is quite dangerous for a kid - thus unusable.…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Resizing of the Ball may be Needed to ensure clearence. The Example gcode resizes the ball to 7.3mm diameter and splits it in to two halves. There is a Square Connector, no glue needed. The Example Gcode disables Elephant foot…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
