Wyniki wyszukiwania: replacemen

Sortowanie

14 121 modeli

P
PrintablesPrusa Research

CORE One (L) Nozzle Replacement Tool

Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…

Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
23 393
Polubienia
3686
Ocena
4,9
P
PrintablesLinus

CORE One Nozzle Replacement Tool for E3D Nozzles (e.g. ObXidian HF)

tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…

Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1970
Polubienia
436
Ocena
4,96
P
PrintablesMich

Glasses Broken Frame Replacement

Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…

Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1735
Polubienia
260
Ocena
5
P
PrintablesAMPDesignworks

Black Diamond Storm 400 LED Headlamp Latch Replacement (now includes lever too)

My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
1193
Polubienia
28
Ocena
4,5
P
PrintablesFormFitPrint

Diaper Genie Complete Replacement Lid - For Older Models

One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…

Wydruk około 7,37 €–9,00 € nettoWstępna wycena jednego wariantu

Pobrania
969
Polubienia
31
Ocena
5
P
PrintablesAngelo

Broom thread replacement ø23mm handle - filettatura standard per manico scopa

Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…

Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu

Pobrania
822
Polubienia
60
Ocena
4,75
P
PrintablesAndrew

IKEA TARNABY Replacement Lamp Shade & Other Variations

IKEA don't sell replacement glass lampshades for their common TÄRNABY table lamp, so this was my solution… Original single walled vase mode print worked well but was a little flimsy so I decided to use a lattice vase mode technique I've…

Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu

Pobrania
817
Polubienia
108
Ocena
4,67
P
Printablesredvsgreen

KTM EXC/EXC-F Front Headlight replacement

Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.

Wydruk około 4,47 €–5,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
606
Polubienia
46
Ocena
5
P
PrintablesPaPa Dad

Replacement Battery Cap for Ryobi 4V Lithium Tools

My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
581
Polubienia
70
Ocena
4
P
PrintablesSimple3D

Knitting Machine Needle Replacement

I was trying to 3D print a replacement needle for my small knitting machine. I used the Revopoint POP scanner. I ran into a problem with it not being able to scan small parts. Support told me that part should be at least 50x50x50mm. I got…

Wydruk około 1,81 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
459
Polubienia
102
Ocena
0
P
Printablesfuzzms

Replacement lid for Moccamaster coffee maker

This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…

Wydruk około 4,88 €–5,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
432
Polubienia
26
Ocena
4
P
PrintablesHerander

Stylish Tokabo Lamp Replacement

In case you broke your tokabo lamp I left you a replacement for the glass part. It will be necessary to remove the retaing tabs as you can see on the picture and the botom part it is holding in place with hot glue. I recomend supports to…

Wydruk około 8,57 €–10,47 € nettoWstępna wycena jednego wariantu

Pobrania
362
Polubienia
78
Ocena
5
P
PrintablesHarabi

Fleischmann Kupplung (coupling) replacement H0

Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…

Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu

Pobrania
360
Polubienia
30
Ocena
0
P
Printablesshevron

IKEA toy train (Lillabo / Brio) replacement crossing barriers

A replacement for IKEA Brio / Lillabo train toy crossing gate. As the gates / barriers easily break off, this print can be used as a replacement. It was modeled from the original, with a few minor modifications to simplify printing.…

Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
353
Polubienia
48
Ocena
4,8
P
PrintablesHeikit

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
346
Polubienia
99
Ocena
5
P
PrintablesTurtleku

Playstation 2 front disc tray plate replacement

Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…

Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu

Pobrania
327
Polubienia
28
Ocena
4,67
P
PrintablesOiokohoi 3D

Toyota Yaris 2006 key button replacement

central locking buttons, both lock and unlock button. Inserting buttons require disassembly and insertion inside the battery case. On top of the board

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
319
Polubienia
37
Ocena
5
P
Printablesmstejska

Power button replacement for T430

Just replacement of broken power button.

Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
275
Polubienia
3
Ocena
5
P
Printablesgmmc

Mastermind replacement scoring peg

These little pegs are always getting lost or sucked up into the vacuum cleaner! I made a replacement peg as close as possible to the existing design. Just choose your color (white & black are standard) and print as many as you need.…

Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu

Pobrania
263
Polubienia
15
Ocena
0
P
PrintablesJ

BTT SB2209/2240 XT30(2+2) Replacement Shell

I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…

Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu

Pobrania
240
Polubienia
57
Ocena
5
P
PrintablesBernd

Replacement part for sliding door compatible to IKEA PAX 124341

Ersatzteil für Schiebetür kompatibel zu IKEA PAX 124341

Wydruk około 0,81 €–1,00 € nettoWstępna wycena jednego wariantu

Pobrania
236
Polubienia
10
Ocena
5
P
PrintablesOrson Jones

Replacement Flick-It for Bop It Extreme 2

Replacement flick-it for a Bop It Extreme 2. If you broke your flick-it print a replacement!

Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu

Pobrania
230
Polubienia
6
Ocena
0
P
PrintablesDizzelowski

Door Slider SPACEMAKER A67 X6 replacement

Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…

Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
229
Polubienia
5
Ocena
0
P
PrintablesND

TipToi Replacement Tip for Gen 4 perfect fit

Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.

Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
206
Polubienia
13
Ocena
5
P
PrintablesClemens

Makita Makpac Hinge Pin Replacement

Printed in ABS with 100% infill

Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu

Pobrania
205
Polubienia
14
Ocena
0

Replacement Clip for Black Diamond Cosmo-R 350 Headlamp

This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
200
Polubienia
4
Ocena
5
P
PrintablesTantalus

Mitutoyo Micrometer Replacement Battery Cover

This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
184
Polubienia
7
Ocena
0
P
Printablesahaque

Breville Tamper Replacement (54mm portafilter)

Breville Tamper 3D-Printed Replacement Part Overview Is your Breville machine missing its tamper, or has the original one seen better days? Look no further! This 3D-printed Breville Tamper is designed to match your Breville espresso…

Wydruk około 2,11 €–2,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
180
Polubienia
29
Ocena
0
P
Printablesdp studio

Curtains Slider replacement for attaching curtain clips/hooks to a curtain track

The story behind these sliding hooks/gliders (in Romanian: glisiere pentru călăreți agrafe de perdea) is born out of necessity and frustration. After several of my original curtain gliders broke, I embarked on a seemingly endless quest…

Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
178
Polubienia
14
Ocena
5
P
PrintablesMr. T

Clemsa Remote Cover Replacement - Mando de Garaje

Introducing a robust 3D-printed cover for the Clemsa Mutan Mini remote! After breaking twice, this durable design offers a long-lasting solution. Perfect fit, easy to print, and adds a layer of protection to your remote. Ideal for…

Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
173
Polubienia
12
Ocena
5
P
PrintablesAdam

ACTAR 911 Infantry Airway Cap - Replacement

This is a replacement Airway Cap for the ACTAR 911 Infantry (infant) CPR training manikin. You can see a comparison of the original piece and this model in the photos. Design notes The overall shape is faithful to the original piece, with…

Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
170
Polubienia
11
Ocena
0
P
PrintablesTJC_3dprinting

Ridgid 4ah battery replacement parts

We use a range of Ridgid powertools on the mine and the batteries get absolutely battered. Once the batteries clips and mounting plate are broken they are pretty much useless, I have spent many hours painstakingly reverse engineering the…

Wydruk około 5,77 €–7,05 € nettoWstępna wycena jednego wariantu

Pobrania
166
Polubienia
23
Ocena
0
P
Printablesanoetic

Mammotion Luba AWD 1000/3000/5000 Replacement Turf Tires

My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…

Wydruk około 10,50 €–12,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
163
Polubienia
21
Ocena
0
P
PrintablesCorey Ward

Tineco A10/A11 Hero Latch Replacement (Accessory attachment)

This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
163
Polubienia
9
Ocena
5
P
PrintablesRosti

Clipper Comb / Guard Replacement 3mm (Wahl)

Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
162
Polubienia
16
Ocena
0
P
PrintablesDanAndersen

Partsdrawer Replacement for Allit Basic 33 (Aldi Workzone, Lidle Parkside) small parts drawer (Kleinteilemagazin)

If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…

Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu

Pobrania
158
Polubienia
19
Ocena
0

BakFlip Mx4 Corner Replacement

This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts

Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
152
Polubienia
12
Ocena
0
P
PrintablesKapiKF

Drone Parrot Bebop 2 landing gear feet replacement

Drone Parrot Bebop 2 landing gear replacement. Printed with Nebula PLA filament 15% infill.

Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu

Pobrania
150
Polubienia
8
Ocena
0
P
PrintablesLockwatcher

Game Spinner (Die Replacement)

While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
147
Polubienia
31
Ocena
5
P
PrintablesTache

Replacement Holder for SKÅDIS "Container with Lid"

This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…

Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu

Pobrania
145
Polubienia
39
Ocena
5
P
PrintablesGary Hogarth

Tomato Glasses Kids B Glasses - Replacement Arms/Temples

UPDATE Added a V2 - a complete remodel but only in the shorter length for now My daughter came home yesterday and had broken the arm of her glasses at school. She wears Tomato Brand glasses, and these things are meant to be tough but…

Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu

Pobrania
141
Polubienia
15
Ocena
0
P
PrintablesDGA

PARKSIDE 150mm Clamp Jaw Replacement

PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…

Wydruk około 2,50 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
136
Polubienia
37
Ocena
5
P
Printablesplabs.cz

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
123
Polubienia
22
Ocena
5
P
PrintablesJoeDxb

Decathlon Oxelo scooter - brake replacement

This applies to popular and cheap Decathlon scooter. Original part got broken and no replacement parts are available by Decathlon. This mudguard serves as brake so without it the scooter is quite dangerous for a kid - thus unusable.…

Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
120
Polubienia
20
Ocena
5
P
Printablesmeagerfindings

Bonavita Carafe Lid Lever Replacement

Our carafe lid started leaking when tipped, this was most likely due to a toddler dropping the lid multiple times… happens. This print replaces the lever inside, just take off the covering, pull out the old one, struggle to get the seal…

Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu

Pobrania
114
Polubienia
5
Ocena
0
P
Printablescreativemario

Promethean ActivPanel AP9 Crayon - Compatible Replacement Pen

“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…

Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
113
Polubienia
8
Ocena
5
P
PrintablesMetikumi

F-Clamp Cover Replacement - Small Clamps

With this design, I created a replacement for the covers ("shoes") of F-clamps shown in the photos. As long you use the clamps on flat surfaces, this print is a good replacement. Clamping uneven surfaces or even corners is not possible…

Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
112
Polubienia
20
Ocena
5
P
PrintablesMetikumi

F-Clamp Cover Replacement - Medium Size Clamps

With this design, I created a replacement for the covers (shoes) of F-clamps shown in the photos. As long you use the clamps on flat surfaces, this print is a good replacement. Clamping uneven surfaces or even corners is not possible with…

Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
111
Polubienia
22
Ocena
0
P
Printablesbuchnema

Replacement Gear / Cog for Emsa Basic Salad Spinner

This little cog from the Emsa Basic Salad Spinner seems to brake quite easily: … so I made this replacement part. Works well again, don't know yet how durable it will be… Printed in PETG, supports are needed like shown in the 3mf file.…

Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
104
Polubienia
5
Ocena
0
P
PrintablesFredCo

Steelseries APEX M800 / QS1 switch lock replacement

This is a tiny small print for key lock replacement Print into Super Quality mode Remove all previous lock support from key and glue with CA in place. Be carefull on centering key and switch.

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
104
Polubienia
0
Ocena
0
P

Animal Crossing New Horizon - Monopoly Upgrade/replacement

Project is still ongoing! At some point those flimsy Cardboard pieces will wear down or you already have lost them. In that case you can print replacements! Ill be updating the Collection over time. at the moment im testing and modeling…

Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
47
Ocena
5
P
PrintablesJaneo

Insta 360 One RS replacement battery

Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…

Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
6
Ocena
0
P
Printableswolph

Magic Bullet (Blender) Replacement Gear

The model has been designed to be printed on the gear teeth (i.e. upside down) without any supports. The circle in the middle only exists to make the overhangs possible without supports and can be removed if you wish. While the friction…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
94
Polubienia
13
Ocena
5
P
Printableshughs

Prusa Bear PSU Replacement Brace

After placing my Prusa i3 Mk3S Bear Upgrade in an enclosure I realised it would be better to remove the power supply unit (PSU) and place it outside the enclosure to improve cooling. I searched for a replacement brace but the Bear Upgrade…

Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
93
Polubienia
25
Ocena
4,67

Nilfisk vacuum cleaner hose hook replacement / náhrada háčku pro zavěšení hadice vysavače

Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…

Wydruk około 2,68 €–3,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
93
Polubienia
17
Ocena
0
P
Printablespijusn

Xiaomi 1S Rear Reflector Replacement

Reflectors are a safety feature. Consider replacing them with a genuine part. Use this model at your own risk. Dimensions match the original part mostly. The clip is the weakest point in this print therefore it's made as a separate piece.…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
90
Polubienia
9
Ocena
0
P
Printablesmageb

Tefifon Replacement Cartridge Adapter

The original ceramic pickup cartridges of Tefifons are made from a material that absorbs moisture. Therefore, almost all of these cartridges are now rotten and need to be replaced. Here is a photo of an early attempt of me replacing the…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
85
Polubienia
2
Ocena
0
P
PrintablesUKE

Replacement closure for a SAVIC pet carrier

Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…

Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
84
Polubienia
61
Ocena
0
P
Printablespressi

Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
83
Polubienia
6
Ocena
0
P
Printablesgwendal

Audi Central Console Coin slot replacement

Replace the coin slot (part# 8K1858323V10 ) with an empty slot to store more useful stuff. Note: it is not liquid proof. The central console may need to be removed to replace the part. An alternative part is smaller but more liquid-proof.

Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
83
Polubienia
5
Ocena
0
P
PrintablesTempoWrites

Subwoofer Speaker Leg Replacement 4cm

Designed to fit a Jensen CS10 Powered Bookshelf Subwoofer cabinet, but easily scaled to fit other audio equipment. The original rubber leg had a steel washer to make the screw hole rigid, but I've been able to skip that piece. The screw…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu

Pobrania
81
Polubienia
9
Ocena
0
P
PrintablesJohan87

PAW Patrol Rescue wheels replacement projectile

I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…

Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu

Pobrania
80
Polubienia
5
Ocena
0
P
Printablesjbennet-t

Dresser Drawer Track Guide Replacement - Bassett

Replacement drawer track guide for a Bassett dresser. A very niche part, but hopefully somebody can find some use for it. Bought this dresser 2nd-hand, and one of the drawer guides (shown in white) was already broken. A second guide broke…

Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
80
Polubienia
8
Ocena
0
P
PrintablesStefan666

N-Scale Roco 25099 crane tender car mount and lift hook replacement

Second hand Roco N Scale crane came without a mount for the beam on the tender , and the hook was missing. Created a replacement , and fdm printable on slow speed. ( might need a few tries ) made to rotate ( use M2 or M3 boult and nut ) ,…

Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu

Pobrania
78
Polubienia
20
Ocena
0
P
PrintablesSica

Replacement for Beko fridge handle

Beko made some twin doors fridges that have handles held in place by some complicated plastic parts that often break. They are different top and bottom. I made both of them, printed in black ASA and gave it a bit of Acetone smoothing.

Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu

Pobrania
78
Polubienia
7
Ocena
0
P
PrintablesMaxPa

Vaude - replacement buckle / Steckschnalle Ersatzteil

This is a replacement part for the clips used on Vaude rolltop bicycle bags

Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
78
Polubienia
8
Ocena
5
P
Printablesnwilk123

Ikea LÄTT (Latt) chair seat replacement

I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…

Wydruk około 13,62 €–16,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
76
Polubienia
6
Ocena
0
P
PrintablesBob

Ikea Komplement Shelf Pin super strong replacement

Moving into a new apartment with your old Ikea shelves sometimes leads to reinforced shelf pins ;-) I am very happy with the result. It is really strong and works with the original screw. The thinkering with different print orientations…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
17
Ocena
5
P
Printablesperoteq

D'Addario tuner replacement part

This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
74
Polubienia
4
Ocena
0
P
PrintablesJCPhlux

Server Rack 1.3U Mounts (Cage Nut Replacement)

Server rack screw and cage nut replacement. I remixed this to for 1.3U items that fit on a standard 19" server rack. This is just the 1.3U Mount you will need the nut from Spartan's Server Rack 1U and 2U Mounts (Screw and Cage Nut…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
73
Polubienia
24
Ocena
0
P
PrintablesSteinamyte

Replacement bracket for Playmobil excavator 3001 / Halteklammer für Playmobil Bagger 3001

Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…

Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu

Pobrania
71
Polubienia
2
Ocena
5
P
PrintablesJoseph Craig

TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct

Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…

Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
70
Polubienia
6
Ocena
0
P
Printableswedgeworks

Box Fan Replacement Foot

The feet on my box fan broke. So I took some photos, imported them into Fusion 360, took a bunch of measurements with a micrometer and boom. Replacement Feet on Demand. After I printed the first one I realized it was a little loose so I…

Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
70
Polubienia
13
Ocena
0
P
PrintablesMatthewGTaylor

Trekking Pole Replacement Baskets

Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…

Wydruk około 1,21 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
69
Polubienia
18
Ocena
0
P
PrintablesBotWithWrench

MK4 Nozzle Replacement Tool - No Tab

The first two times I tried to use this tool it became stuck onto my tool head so stiffly that I had to rip apart the model to get it off. This could be because I was using a fairly stiff/tough PLA, but regardless of the reason it was…

Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesSlicedbread

Toilet Tank Flush Lever Replacement for American Standard

My toilet lever broke and I didn't want to buy a new one. This model is certainly not overengineered and the tolerances are pretty tight in most places but if you'd rather print one than order one for whatever reason (or just need a…

Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu

Pobrania
65
Polubienia
10
Ocena
5
P
PrintablesPieter Koenen

Sealant Scraper Tool - Thumb or Finger Replacement Tool.

Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…

Wydruk około 3,21 €–3,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
63
Polubienia
6
Ocena
5
P
PrintablesKay

138x138x14mm Haus- und Hofablauf Ersatzrost (house and yard drainage replacement grate)

Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…

Wydruk około 6,26 €–7,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
62
Polubienia
6
Ocena
0
P
PrintablesLeoColman

Love Letter Favor Token — 3D-Printed Replacement (Single-Color)

Love Letter Favor Token — 3D-Printed Replacement (Single-Color) A clean, durable single-color replacement for the Love Letter favor/affection token. Prints fast, stacks neatly, and upgrades table presence without needing color swaps or…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
62
Polubienia
2
Ocena
0
P
Printables3Diocrity

Mares MR12 Scuba Regulator Replacement Cap

This is a replacement for the plastic cap that protects the Mares MR12 Scuba Regulator 1st Stage. Mine broke due to age and I didn't want to leave it exposed. I printed it first in PLA, but hope to print it soon in something with a…

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
2
Ocena
0
P
PrintablesMark DiVecchio

Replacement FasTrack Switch Stand (and optionally Lever)

The Lionel Fastrack manual switches have a weak design for the switch stand and lever. It would last a 10 year old kid about 3 minutes before it is broken. I have two switches, both broken. I did order replacement stand and lever for them…

Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu

Pobrania
58
Polubienia
6
Ocena
0
P
Printablesmkasberg

Replacement Ball for B. Toys Whacky Ball Toy

We lost one of the balls that came with our B. Toys Whacky Ball pound-a-ball toy. This model is perfectly sized to work as a replacement! Here's the original toy: Whacky Ball Printing Tips Because 3D printers can't print steep overhangs,…

Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
57
Polubienia
7
Ocena
0
P

Replacement Tray Holder – Kinderkraft Enock

This 3D model replaces the original tray holder part for the Kinderkraft Enock high chair. Perfect for fixing a broken or missing holder with better stability of the tray (tighter tolerances). Recommended material: PETG (for better…

Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
1
Ocena
0
P
PrintablesDonDallas71

MySmartBlinds Replacement Gear

This is a replacement gear for a smart blind automation motor. I bought several of these motors and after 5yr the plastic gear inside each has started to disintegrate and crumble. The stacked gears in the motor are mostly metal except for…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
8
Ocena
0
P
PrintablesOxyfraggle71

Heat-set Insert replacement holder for Weller soldering iron WEP70 connected to Dremel 220 Drill Press

I have designed two 3D-printed models to create a simple connection between the drill stand from Dremel (model name 220) and the soldering iron WEP 70 (station WE1010) from Weller. The main goal is to enable the vertical insertion of…

Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
10
Ocena
5
P
PrintablesSteveS42

Popsicle Stick Replacement

This design is a quick and easy replacement for a lost popsicle stick. It is not round like the original, but doesn’t need to be to function. It also prints with no support.

Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu

Pobrania
54
Polubienia
23
Ocena
0
P
PrintablesSarusani

Ekster Cardholder Replacement Backplate

This is a replacement for your Ekster Cardholder backplate. It is 0.5mm thicker than the original aluminium backplate to give it some stability. Note that this will not block RFID, this can be great if you store an access card and don't…

Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
12
Ocena
0
P
PrintablesThe Mapster

Radio Flyer Wagon Front Wheel Replacement Bushing

There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…

Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
52
Polubienia
4
Ocena
0
P
Printablesfluetke

Bremshey Dinett Replacement Bearing

This replaces a worn bearing for the serving tray of a 1960s Bremshey Dinett folding side table. You'll probably want to print this in Nylon or IGUS Iglidur filament. To replace the bearing, pull out the metal rod that is supported by the…

Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesSJM

Babybay Sicherungszylinder Ersatz/Replacement

This is a replacement for the Babybay safety connection cylinder. Settings Value Infill 5% (adaptive cubic) Perimeters 2 Layer Height 0.2 mm Material PETG (PLA) Supporting Material none Comments printed on MK4 with MMU3 FW6.1.3 Ironing no…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
51
Polubienia
8
Ocena
0
P
PrintablesJadozub

Volantex Phoenix V2 Replacement Motor Mount

The original motor mount for Volantex aircraft is crap, as any collision motor first cuts it clean off the rest of the fuselage. This motor mount replaces the entire nose section, providing strong support of the motor and better cooling.…

Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesF Engineering

Replacement for Blum 174H7100E8 EXPANDO dowel

Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesKlaus

Arctic Freezer 13 Fan replacement

It snaps in like the original one and you can use every 90mm fan. i tested it with the Noctua NF-B9 PWM and it‘s 1-2°C cooler and super quiet. (Open frame consition) You sould use at least PETG. happy Printig

Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesSpacekoaster

Staple Remover Replacement Handles

Hello, Here are some easy to print replacement handles for some cheap staple remover. Print them out of PETG (PLA is also fine, but not as durable), at your preferred layer height with 4 perimeters. Print 1x Up and 1x Down. Once printed,…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu

Pobrania
44
Polubienia
13
Ocena
0
P
PrintablesT.Mundal

CORE One Nozzle Replacement Tool for E3D Nozzles (e.g. ObXidian HF) Remix multicolor

Print it with colors without MMU import the 3mf file into prusa slicer and open it as a project, start with black - white - orange - black - white - black - orange - black ignore the message about wrong filament when you start the print…

Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
43
Polubienia
6
Ocena
5
P
PrintablesIgor Kopriva

Replacement part 481246279768 for Whirlpool dishwasher

Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
43
Polubienia
2
Ocena
0
P
PrintablesEricFrenk

Training Wheel Replacement 10.4mm Diameter

Training Wheel Replacement with 10.4mm shaft diameter. Based off of gigi78's Training Wheel. Changed the inner diameter to fit a different diameter.

Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
41
Polubienia
0
Ocena
0
P
PrintablesBM

Meccano beam L5 replacement

My son needed a missing part for his Meccano Junior Kit. This is a PLA version.

Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesAhmad

IKEA Cabinet Feet Replacement

I was moving furniture around and broke some of the plastic supports which comes with IKEA furniture. So, I did a 3D model of it and printed it for my cabinet. I used PLA filament, and the infill value up to your needs. Can range from…

Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu

Pobrania
40
Polubienia
3
Ocena
0
P
Printablesduskvirkus

Replacement Left Hinge Part for Bemis Toliet Seat

Hinge for my Bemis toilet seat broke. Tried to epoxy it back together. Didn't work so modeled a replacement part. If this is a design flaw and you happen to have the same toilet seat hope this saves you some time. Printed on a Creality…

Wydruk około 2,17 €–2,66 € nettoWstępna wycena jednego wariantu

Pobrania
37
Polubienia
9
Ocena
0