31 854 modeli
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(3/28/2024) Added a new 3mf version that is ridiculously subdivided. Dont think it changes it much. but if someone wants to give it a go. Its named the same VSKUL only its 31mb Its a stretch to say this is an original model. It's a scan…
Wydruk około 10,07 €–12,31 € nettoWstępna wycena jednego wariantu
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Wydruk około 6,77 €–8,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 2 - adds support for round grids, adds a parameter for outer wall thickness, and allows for quick adjustment of $fn (facets) on circular grids. Summary Hexagonal grids are a nice design tool when printing. They are regularly used…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
HEXADIDG - FULLY 3D PRINTABLE DIDGERIDOO DESIGN BY: L3V3C Have you ever wanted to try play didgeridoo? Well, you now can thanks to amazing new technology of 3D printing. With modern and usefull design focused on the superior shape of…
Wydruk około 25,10 €–30,68 € nettoWstępna wycena jednego wariantu
This is a trident for Dummy 13. It's about 150x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
UPDATE 26.2.2022: added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing) added short straight track (the size of ordinary straight original track) with big side protrusions, which are…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
Zen Bridge and Temple. Print separately. Size to your preference.
Wydruk około 7,32 €–8,95 € nettoWstępna wycena jednego wariantu
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
Wydruk około 3,22 €–3,94 € nettoWstępna wycena jednego wariantu
Reproduction fidèle de l'emblème du Real Madrid, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 /…
Wydruk około 5,16 €–6,31 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) Silence broken only by hybrid fury. This wall-mounted 3D printable model of the Porsche 919 Hybrid pays homage to the three-time Le Mans champion. With its centralized cockpit, wide aero arches,…
Wydruk około 12,71 €–15,54 € nettoWstępna wycena jednego wariantu
this is a model I created to test out longer bridges and large overhangs
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! V2 Update info at bottom: I've been wanting to print a case to hold Switch Cartridges anyway, but I decided rather than…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Wydruk około 12,31 €–15,05 € nettoWstępna wycena jednego wariantu
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Simple bed level test - 5 x 5 grid of 25x25mm squares layed out in the shape of the Prusa MK3 Printbed.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu
This print holds six bottles of beer in your fridge and prevents them from rolling around. The model can be used sideways or upright depending on your needs. Perfect if you need to keep a six pack of bottles chilled but with the least…
Wydruk około 8,04 €–9,82 € nettoWstępna wycena jednego wariantu
Students will create a 3D printed bridge using different shapes for structural support. Then we apply weight to them. Whoevers bridge is the strongest will win the competition.
Wydruk około 3,89 €–4,75 € nettoWstępna wycena jednego wariantu
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not my design, found on Thingiverse: https://www.thingiverse.com/thing:3346103 which is a remix of https://www.thingiverse.com/thing:1615753 // Edit: Not sure but might be the same as…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena jednego wariantu
Hello there! Tired of your fridge running away only to be taken by some jawas and sold to the first scruffy-looking nerf-herder that comes their way? It seems like it's a problem that has plagued us for generations… or at least since…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
This is my version of a portable Quoridor game You can easily find the rules of the game in the internet https://en.m.wikipedia.org/wiki/Quoridor All my travel games have the same size. That makes them easily stackable. They are small…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Hi! Let me introduce the whole grid of 2023 Formula 1 World Championship! Now you can show the world who your favourite driver is 🏎 In the files section you will find: stl files with each driver keychain from the list: Red Bull: Max…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
Holder for spade bits up to ~1" compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More details…
Wydruk około 3,53 €–4,32 € nettoWstępna wycena jednego wariantu
Brio print comptatible with the Brio train system. Fun cheap part to print to improve the Brio system of your kids! Comments appreciated for improvements.
Wydruk około 4,35 €–5,31 € nettoWstępna wycena jednego wariantu
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
When you drive around with a fridge filled with food, the food tends to fall out when you open the fridge. With these rails most of the food stays in place. The rails clip on to the shelfs of a Thetford fridge and freezer where the…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Holder for Ryobi drill bit collection compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill bit sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Wydruk około 8,73 €–10,67 € nettoWstępna wycena jednego wariantu
gridfinity zip tie storage (came back to look at this holder and saw just how many mistakes i had made, iv learned how to do a better job of it so hear the updated version) Added a taller version for the longer zip ties enjoy
Wydruk około 5,91 €–7,23 € nettoWstępna wycena jednego wariantu
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
Bridge rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Test if your 3d printer can print in the air 3D Benchmark Print settings: Infill: 100% Supports: No Layer Height: 0.06-0.2mm Speed: tested at 40mm/s and 60mm/s (the slower the better)
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very simple box requires no supports. I printed it at 0.3mm as it doesn't have any fine detail so it prints fast. I have included the Fusion 360 file and a sketchup file in case you want to modify it.
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
This is a tiny little project (about 1 gram of filament), which simply creates a refrigerator magnet out of a 10mm diameter x 3mm neodymium magnet in the shape of a popular type of thumbtack. I bought 35 of these magnets from Amazon (US)…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
A fridge magnet in the shape of the necronomicon to hold your evil spell shopping list. Glue 4 to 5 Ø6mm X 2mm magnets in the hols on the back.
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
JERRARI3D.com The GEN2 Grid Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. These drawers feature grid pegs…
Wydruk około 3,70 €–4,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Wydruk około 4,76 €–5,81 € nettoWstępna wycena jednego wariantu
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Yet another Gameboy Cartridge. Includes classic or "newgrip" styles and OpenSCAD file. Print with build plate supports, 0.2mm layer height
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…
Wydruk około 6,73 €–8,22 € nettoWstępna wycena jednego wariantu
Remixed from https://www.thingiverse.com/thing:4878022 I resized the dimensions to match a ridge wallet exactly, added tapered edges so it feels better in the hand, and added tapered screw holes at the correct dimensions so the stock…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Gridfinity Tape measure holder
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 4,64 €–5,68 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped A parametric Modell of the standard Gridfinity Box in Solid Edge. If you set a Dimension to 1, the Model gets stuck. So if you want a 1x4 Box, Set 4…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Socket holder 10-22 metric The socket holder uses a gridfinity 2x5 bin. Its made for metric sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22. Used with 1/2" drive ratchet. Print with 10% gyroid/grid infill and no support. You…
Wydruk około 8,84 €–10,80 € nettoWstępna wycena jednego wariantu
I always felt like most models used unnecessary amounts of filament, so I decided to try and create my own models with less material. It's still reasonably strong and prints quite fast and without supports. Recommended Settings: Material…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Holder for Dremel 1/2" and 1/4" Dremel sanding bands, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 2,60 €–3,17 € nettoWstępna wycena jednego wariantu
This is a simple holder designed for up to 5 SNES games, intended to be compatible with both PAL and NTSC cartridges. However, I've only had the opportunity to test it with PAL cartridges. I printed the stand by laying it on its side with…
Wydruk około 4,75 €–5,80 € nettoWstępna wycena jednego wariantu
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
Design description This is a gridfinity holder for 10 LR44 Coin cell batteries. Block area is 1x1, and has a height of ⅓, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Scaling is not advised , but if you do, scale the characters also. I added a BLANK PIN so get to work on the REMIXES! All the characters are individual, so you can print any phrase. Print Grid Board in 1 or 2 colors with easy filament…
Wydruk około 5,30 €–6,48 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Description Stripper clip holds 10 rounds of 5.56/223rem or any other similar cartridge Intended for clip loader located here Print instructions No rafts No supports 0.20mm quality 15% Infill PLA + or better Thank you and happy printing!
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Simple Gridfinity box for index cards and/or 3x5 post-it notes, plus two writing implements. Wells for pens fit regular Sharpie markers, many types of mechanical pencil and our beloved Pilot Acroball-2 black and red pen.
Wydruk około 7,08 €–8,65 € nettoWstępna wycena jednego wariantu
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tanos BasePlate Printed with Aurarum Black Petg Set Skirt to 0. Recommended printing with a .8mm Nozzle at .4mm layer height ([email protected] is great but time consuming) May add Parametric .FCStd if enough interest.
Wydruk około 6,81 €–8,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…
Wydruk około 11,72 €–14,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These hooks snap on to the back of standard gridfinity bins, in heights 2u, 3u, 4u, 5u, 6u, 9u and 12u, with space for the stackable lip. Please note that the lip is required - it's the mechanism that allows the hook to grab the bin. They…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…
Wydruk około 9,84 €–12,02 € nettoWstępna wycena jednego wariantu
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Wydruk około 10,03 €–12,26 € nettoWstępna wycena jednego wariantu
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 50+ Supports: Yes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Material: PLA or PETG Raft: Optional Brim: Optional Two of these parts are…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Socket holder 8-22 metric, 3/8" drive ratchet. The socket holder uses a gridfinity 2x5 bin. Its made for metric sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22. Printed with 10% infill. You can hang it on a peg board…
Wydruk około 7,08 €–8,66 € nettoWstępna wycena jednego wariantu
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
