Frohe Ostern Schriftzug
Frohe Ostern Schriftzug
- Pobrania
- 2312
- Polubienia
- 189
- Ocena
- 5
871 modeli
IT WORKS! :) After dreaming this up for awhile, I finally got it to work! This is a swinging drift clip. The base and top come together in a 45 degree angle that allows the top to swing back to the straight position after hit. The holes…
I designed this driftwood piece for my tree frog's tank. It has a natural, organic shape that adds awesome vertical structure to your pet's enclosure! I printed mine in two parts and orientated it vertically to minimize supports and…
Schriftzug “Auszeit” als Deko. Drucken ohne Support liegend.
Držák baterie na podvozek Yokomo YD2 SXII, jednoduchý a funkční koncept. I po instalaci je stále možné použít odklápěcí držák baterie.
Simple octahedron counter to track score in your Riftbound game. Designed for multimaterial but can be printed from single material - digits are recessed.
Auch kein Freund von 0815 Zeitschriftenhalter, hier eine Möglichkeit 3 Zeitschriften in der Toilette aufzubewahren. Erste Lage bis ca. 180 Seiten möglich. (GEO mit 168 Seiten kein Problem) Zweite und dritte Lage bis ca. 120 Seiten…
I recently acquired a Oculus Rift CV1. One of the touch controllers was missing the cap in the middle of the thumb stick. Unable to find just that part without buying another controller I decided to make one. After you print this you can…
Ich brauchte einen Stehordner / Zeitschriftensammler im DIN A5 Format, der auch einfach und (relativ) schnell zu drucken ist. Daher dieses Design aus vier Teilen (das Seitenteil muß 2x gedruckt werden) das mittels der “Nasen” ausgerichtet…
Im Beispielfoto mit Prusament PETG (0,3mm Schichthöhe) gedruckt. Dieselben Druckeinstellungen sind im angehängten GCode (mit Farbwechsel) enthalten. Eine weitere GCode-Datei ohne Farbwechsel ist auch dabei. Erste Schicht Düse 240°C / Bett…
This display label (12 x 5 cm) is made to be used as descriptive label in an exhibition. It is reinforced on the back, so that it does not bend. It can be used in two angles, see picture.
Die Ventilkappen Beschriftung dient beim Reifenwechsel der Kennzeichnung
Zeitschriftenhalter für den Heizkörper im Badezimmer. Die kleinen runden Verbindungen konnen weggelassen werden und nur die Vertiefungen für eine bessere Verteilung des Klebers genutzt werden.
Ich finde die Marmeladengläser von GLÜCK in Form und Größe sehr praktisch für Gewürze. Ich reinige die Gläser, entferne die Aufschrift (mit einer Drahtbürste bzw. einem Aufsatz für den Akkubohrer), das ist in einer Minute erledigt. Ich…
Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…
DriftScoop – Paws Edition Part of the Drift Series Scoop. Clip. Go. The DriftScoop – Paws Edition brings pet personality to the rugged utility of the original DriftScoop. With the same travel-ready design and volume-tested functionality,…
A direct drive steering set with servo mount and steering arm made for Yokomo YD2S Printed on: Ender-3 pro No specific print settings needed My print settings: Layer height: 0.2 Infill: 100% !! NOTE !! U should print with something…
Einfache Schilder die mit Kabelbinder angebracht werden können
for English see below Meine MMU3 for MK4 ist gestern gekommen. Noch habe ich keine Erfahrung damit. Allerdings habe ich mehrfarbige Beschriftungen bisher durch eine Intarsienarbeit realisiert. Da ich mir vorstellen kann, dass euch das…
Overview Sick of loose screws rolling off your workbench or half-used resin bottles cluttering your space? DriftJug is here to bring order to the chaos! This versatile 3L container keeps bulk materials sealed, organized, and—best of…
drift · planter modern minimalist planter design with pattern that sits elevated on wrap-around plate full dimensions in mm ~ x: 130 · y: 130 · z: 100 photos show printed in wood pla .40mm nozzle .20 layer height 10% cubic infill fuzzy…
I wanted a GREAT looking drift track for my home…but didn't want to pay the crazy prices. I decided I was going to create this curb model in different diameters so I could piece together a track however I wanted! Available in 3ft, 5ft,…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
drift · lamp modern minimalist table lamp, designed with a modular assembly approach for both style and functionality Assembly is simple and intuitive: Thread the power cable through the lamp body, allowing the plug to exit from the…
Initially, I designed this wheel for on-road drifting. I created it for the Traxxas E-Revo 1/16 (VXL), but it may also fit other RC cars with a 12mm hex wheel carrier. The front wheels are slightly narrower to provide enough steering…
I wanted to make a version of the little car dashboard drifter that I could use any hot wheels or similar cars on. It could probably be adjusted and tuned a bit more but I thought I would share it in case anyone else wanted to print one.…
English : Printed with the readable side laying on the print bed, in order to benefit from the good looking textured PEI sheet. Deutsch : Gedruckt mit der lesbaren Seite auf dem Druckbett liegend, um von dem gut aussehenden, texturierten…
READ THIS - NEW VERSION IN DRIVE TESTING PHASE! Model coming soon! - Model works as of now, you can assemble and drive it around on areas with no rocks etc(something like carpet indoor or hardwood flooring). Driving on asphalt or concrete…
Hyper-K Micro Machine The Kei Drift Truck. Inspired by Japanese Kei cars. This is my own desing created from scratch. This model has steering wheels for drift action. Consists of 20 parts , Designed for easy printing without supports. I…
A new version is available! Here it is! This is a 1:10 scale drift wheel with a 12mm hex. Print the wheel and tire separately. The wheel and tire fit together with two notches. add a thin bead of Super Glue in between the wheel and tire…
Hi Rodnie, Yes I do have this model kindly provided by Pyropete03 over at the Diviant Art site. https://www.deviantart.com/pyropete03/art/Fortnite-Drift-Kitsune-Mask-755448980 As always check the sizing suits your needs and if you do…
This is a spacer meant to be used to repair joy con drift using the method shown in this video: https://www.youtube.com/watch?v=Vid8lIXmZwE Instead of cutting cardboard and that imprecision, you can just print this spacer instead for that…
16mm spin-down +/- Might Dice for playing Riftbound TCG! These are six-sided dice ranging from +/-1 thru +/-6. Based on the design seen on-stream at Shanghai Nationals 2025. Featuring rounded corners, print with 100% infill for a…
A Nissan 180sx edited to fit a V16 open z chassis. It is not a original model, instead a drift modified car. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…
This is a hanging drift clip for 1/10 RC drift tracks. Prints in 4 parts. 1 upright - prints flat on the back with the feet pointing up. No supports needed. 1 crossbeam - prints on the side. Supports required under each interlocking…
People of the Drift Club asked me if i can Print some Rolecage stuff that fits in every Car. I tried my best to fit what they want. its just for the look, hope you like it :) The Sidebar you have to Mirror for the other side. Added some…
rift · laptop stand modern minimalist vertical laptop stand, with modular approach to be able to have different gap widths. dimensions in mm: stand ~ x: 153 · y: 123 · z: 81 available insert gaps: 12, 13, 16, 17, 18, 20, 22, 25, 27, 29…
Wheel model for RC drifting.
This project has wasted 20+ hours of my life. So please enjoy it and fix any issues you come across. Also feel free to improve and modify this design however. (Side note, this kit gives the exact same angle or a couple degrees more than…
A detailed 3D replica of the RAYS TE37 SEGA – inspired by iconic real-life car wheels, reimagined as a keychain or compact desk decoration . Perfect for car lovers, JDM fans, tuners, or anyone who appreciates automotive style in miniature…
Drift Car Fidget – Desk Toy A fun little fidget toy that actually drifts . This drift car has a common 608 skateboard/scooter bearing mounted in the nose, letting it slide, spin, and drift around your desk and any obstacles in its way.…
1/10 scale aerowolf inspired lip kit for 240sx. measurements taken from addiction rc d-max 180sx lexan body.
Hi, It's my air funnel for 30mm and 25mm fan.
Helix Rift – Sensory Twisty Fidget Helix Rift is a satisfying rotating sensory fidget built from interlocking spiral blades that create a dynamic twisting motion while maintaining a clean sculptural appearance. The layered geometry gives…
I've tried various filament clips and didn't feel fully content with any of them, so I decided to create my own. I noticed that the spools with the tiny hole on the rim can be used to insert the filament end and it works so well. Only…
Here are available side mirrors for RC drift cars. The mirrors are in 1:10 scale. I always had a problem with mounting the mirrors, so I fitted them with a thread and a nut. The mirrors follow a design direction towards Japanese drift…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with grips so these…
Self-Customizable Sign for Labeling This blank sign is designed for you to personalize and label as you need! You can add your own text in several ways: After Printing: Simply write or draw on the sign with a marker or pen. Before…
Kräuterschilder zweifarbig aus ASA. Kleine Schildchen zum Beschriften von Kräuterbeeten. Weitere Kräuter findet ihr unter Dateien.
For the most up-to-date parts, visit the GitHub project page . A 3D-printed, 4WD RC drift car. 1:28 scale, fits 90mm (M) wheelbase MINI-Z shells. Test drive: https://youtu.be/90DoZpYbfy4 U-joint closeup: https://youtu.be/g_EzM2HMQvg Note:…
Rim and drift tire for Maverick Strada RX 1:10 RC car. 12mm hex hub, 88mm in diameter , 31mm wide (62x29mm rim). I printed the rim in ABS and the tire in TPE (Fiberflex 30D), 10% gyroid infill. No glue needed, its a tight fit. If you make…
Keep your Riftbound games organized with this magnetic counter and status tracker kit . Designed to display buffs, debuffs, and other status effects during gameplay, this 3D printable accessory includes dedicated slots for tokens, dials,…
rift x2 · dual laptop stand modern minimalist vertical dual laptop stand, with modular approach to be able to have different gap widths dimensions in mm: stand ~ x: 120 · y: 131 · z: 68 available insert gaps: 16, 17, 18, 20, 22, 25, 27,…
Dekorativer Schriftzug
This is an organizer for the boardgame Xia - Legends of a Drift System and the expansions Embers of a Forsaken Star, Missions & Powers, Sellsword MkII. It supports sleeved cards (I use Docsmagic Perfect Fit) and vertical storage. This is…
These Barriers are perfect for a Sturmkind drift track. I printed the parts from PLA and they work perfectly. The Barriers are ideal for limiting the track on a Rollrennstrecke drift course
Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…
Skydrifters! Two unique poses are provided. Both are integrated with their bases and are intended to be printed in one piece. I had good success printing the flying version with the base attached to the build plate and using mostly…
1/10 scale shotgun style drift exhaust. sized for addiction rc d-max 180sx.
A drift barrier for RC drift cars designed to navigate sharper corners.
hello . i created a bash bar , rear bumper for drift rc models
This creation makes it possible to drifter your favorite hotwheels car at the same time as you take turns. To realize the assembly you will need a chc screw M4x12 mm as well as a roller or scooter bearing. First assemble the car support…
Lets KILL all tyres with this little beast!! Fun and easy print. Enjoy! Juri
Bring your car to life with this incredible dashboard mount! Designed especially for drift enthusiasts, this accessory allows you to display your cars in a dynamic way, simulating the drift effect. Recomended print settings: Layer Height:…
This is a remix of @Formyx3D_1825765 awesome hextech design. I changed magnet size for bigger magnets and modified the box to allow a slot for a display card in a hard case. I also removed some of the stuff of the front so you can see the…
design to prevent joy stick from being crushed when traveling or placed into a pack.
Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this EDITS: 1/26/24: Added multi-body STL for the…
1:10 Scale Wheel for RC Drift Cars Printed in ASA material, ideal for strength and weight (one wheel weighs approximately 11.7g). Designed for Tire Mounting Tape. Fits perfectly, tested with Yokomo tires. Offset: 6mm Hex: 12mm
Simson Schriftzug alt für den Tank oder Seitendeckel ;)
Quick and easy to print. Flip the model upside down to print without supports. I printed it with 10% with zero issues.
I created this 3d Lettering because i could not find any. Use this in combination with other models or modify it according to your needs. Have fun.
2 modelos de organizadores para el hueco entre asientos del Peugeot Rifter
Easy to print drift tire for a 1/10 RC car. PETG is perfect for this kind of application. PLA works too, but I wouldnt recommend it. Those tires drift well and are quite durable. Removing the supports (I would recommend tree-support) can…
Bierkiste-Batterien-AAA-Beschriftet
1:10 RC Drift Track curb. 950mm diameter. Two options, the one with a hole saves around 14% filament per section.
These punches are used to drive new shift detent pin bushings to the correct depth in the ZF5 transmission case. These are BMW special tools 232360, 234022, 234023, 234021, and 233110 These punches are based on the drawings from the…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
Just a simple part to help keep your motor cool. Please print in the default orientation with supports. I have included a cut pattern you can print on your 2d printer to help with cutting the hole in your car body. Please make sure that…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
All Arrma Grom tires can be printed with supports only on the build plate. Drift tires printed in PLA will be the most slippery. Print the road tires in TPU for better traction, though they remain quite slippery. Pin tires can be printed…
These are Drifting the WPL D12 very well, bone stock! Even better when upgraded Remix of a 1:10 scale RC Drift Rim (Source file/Author unknown; will 100% credit when I find it, Thingiverse) Remix of Gadoga "Tamiya M Chassis Drift Tire…
Einfache Möglichkeit einen Überblick über die Pflanzen im Garten zu haben (es handelt sich hier um einen Remix). Die Schilder sind inspiriert durch ein super Design von Martin Merklin (seine Schilder sind auch direkt bei ihm im Shop…
Gäste/Guests WC Schriftzug/Lettering
Drift wheel and tire combined, 65mm diameter, 12mm hex. The shaft hole is 4mm, but its easy to add a negative cylinder, center the wheel and a cylinder of the desired diameter. keep in mind to do ad 0.1mm for tolerances. I created it for…
can be printed together or separately in other colours can be printed without support card contains BMW keychain the BMW E30 is very realistic Print in place kit card , Assembly required
License plates for RC 1/10 drift car, attach with double sided tape. Printed in 0.1 layers. Add color change in prusa slicer on the last layers to get multi colored print.
Simple single part RC drift tire. This is the updated version to add spokes. I also added a STEP file for easy editing.
Wheel model for RC drifting.
Englisch The Minions to hang/stick to the door with Welcome lettering and hole for peephole. Door viewer has an outer diameter of 26.85mm. Deutsch Die Minions zum an die Türe hängen/kleben mit Welcome Schriftzug und Loch für Türspion.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Rims can be printed in PLA, tires are printed in PETG. Can be glued together
Hello There! This RC Drift Boat (Airboat) is a model designed with a goal of being a flat-bottomed Airboat with the ability to pull off quick 90-degree horizontal skipping on the water. Tested version 1 of the RC Drift Boat is currently…
Traffic Cones for Car Drifters or Anything
A piece of wood for your creativity. Chop it, hack it, mix it.
NOW INCLUDES STL MODELS TO IMPORT INTO YOUR PROJECT Import your 3D printable files into this project and create your own body kits for your Jiabaile 1:43 Scale AWD Drift Car Here is a link to the product to make sure it's correct Sorry in…
Simple magnetic body mount for the Yokomo YD2 vehicles. I specifically made this for the YD2-Z RTR model. You will also need 12mmx3mm magnets, and some 1.5mmx15mm screws to attach it. It is designed for the screw to go through the factory…
I tried ESylin's drift wheel ( https://www.thingiverse.com/thing:1334558 ) and they worked great, just wanted some that are a closer diameter to the stock tires so I drew these up. This design is for use with 12mm hexes, which the Slash…
A set of drift wheels for the WLToys K989 rc car. There is a right and left wheel so that the angle of the spokes look the same. But there is no problem with putting them on either side of the car. I have printed these wheels in both PLA…