2755 modeli
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Wydruk około 13,14 €–16,06 € nettoWstępna wycena jednego wariantu
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Wydruk około 3,03 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rc 1:10 scale triangular roof tent. Střešní trojúhelníkoví stan. Stan se otevírá na kloubu s použitím M3 šroubu, v zavřeném stavu ho drží magnet. Při dotahování pantu nechte šroub volný a nedotahujte ho jinak praskne pant.. Rozměry:…
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
Print, assemble and program your own intelligent Smart Plant Pot. With a hidden water reservoir, pump and sensors why not make your plant care easy. With an Arduino Nano at its core this project uses a water level sensor to let you know…
Wydruk około 5,55 €–6,78 € nettoWstępna wycena jednego wariantu
Designed as a stand for the awesome XGIMI Elfin Portable Videoprojector whose size is 19.2 x 19.4 x 4.8 centimeters and weights less than 1kg, but the stand can surely bear heavier devices, just not sure how heavier. [edit] I added the…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
I have included my files, but your conditions may vary. With a large model, I found it useful to print with a draft shield.
Wydruk około 7,35 €–8,98 € nettoWstępna wycena jednego wariantu
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
A new design inspired by the illusion of movement form slide projectors. No matter how you rotate it, it will always look the same. Used Filament: This model was printed using Aircraft Grey Matt PLA from FormFutura The FormFutura team was…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
When designing a 3D-printed river model, remember that rivers increase in size and volume as they flow from their source to their mouth. They always flow downhill due to gravity, taking the path of least resistance. This causes rivers to…
Wydruk około 8,77 €–10,72 € nettoWstępna wycena jednego wariantu
Projector HY300 Cover This 3D model is a protective cover for the HY300 projector. It is designed to cover and shield the projector lens from dust, scratches, and other damage when not in use. The model is lightweight, easy to attach and…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
LUMIERO is a small handheld 35mm projector I designed for a university course on "expanded cinema". It can handle up to 20m of film and uses a camera flash as lightsource(will be changed in future versions). With LUMIERO you as an artist…
Wydruk około 12,92 €–15,79 € nettoWstępna wycena jednego wariantu
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This is a project box for the SDS011 detector. Using the YABB_Box Libarary.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
This box is designed to fit the Arduino Compatible DC-DC Boost Module with Display - XC 4609 from Jaycar or eBay. Has hole for voltage adjust screw as well as button hole for display change. In and Out holes fit 8mm DC socket panel mount…
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
Bohrschablone 140mm PC Luefter fuer DIY Projekt - Virtueller Pinball (VPin) Für meinen Virtuellen Pinball (Flipper) habe ich 140mm PC Lüfter verbaut. Abmessungen: 140mm x 140mm Da dies ja PC Standards sind, können Sie auch auf andere…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
****THIS DESIGN IS PROPERTY OF BEEKINDCROCHET. THIS IS FOR PERSONAL USE ONLY AND MAY NOT BE MADE AND RESOLD. THIS GOES FOR BOTH THE FILES AND FINISH PRODUCT MADE WITH THE FILES OR ANY VARIATION THEREOF. This tab design was made by me on…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Žáci vytvoří pomůcky pro vizualizaci vzorců pro výpočet obsahu rovinných útvarů - trojúhelníku, kosočtverce/kosodélníku a lichoběžníku.
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
EN: Power supply 2x1.5V AAA batteries for Christmas star at https://www.printables.com/cs/model/656256-christmas-star-vanocni-hvezda The electrical part needs: - 220 ohm resistance - 3V high luminance LED - 1 pc anode battery contact…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modified version of the Steamdeck dbrand Air Tag by InsaneNemesis that includes the mounting pins from the official dbrand universal mount lock. You will have to download the original mounting plate from dbrand in order to make…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kryt terminálu s živým napětím pro zdroje MeanWell řady RD s terminálem se šesti pozicemi.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Univerzální protikus držáku projektoru Solight 1MP2. Print instructions Tisknuto na Prusamini PETG 0.2mmQuality, Infil 60%, 2h50min. cca 25g
Wydruk około 2,20 €–2,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Today I designed a project box to showcase an Arduino UNO build . The enclosure is made to neatly hold all core components in one place, with dedicated mounting points and clean cable routing. It includes holes and cutouts for 7 LEDs , an…
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
Předmětem projektu je vytvořit 3D mapu Evropy. Žáci pomoci návodu vytvoří a vytisknou 3D mapy jednotlivých států Evropy.
Wydruk około 0,71 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Have fun with it! It worked perfectly to print it without support material
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Built for Light Reflection Shape Science Fair Project
Wydruk około 9,74 €–11,90 € nettoWstępna wycena jednego wariantu
služi na odkladanie nastrojou
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Vytvoření 3D modelu z projektové dokumentace RD zpracované v SW Archicad. Výstupem je návod na převedení projektové dokumentace .pln do souboru .stl a následný export do souboru G-code pro 3D tisk.
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
- ska band 3D model for single filament multi-colour print -- ska punk skapunk 2tone band logo rudy rudeboy rudegirl skank mod Australia -- My models are free but if you'd like to buy me a coffee https://buymeacoffee.com/davidlachlanmoore…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Trojan Records Jamaica Ska Rocksteady logo - ska/reggae 3D model for single filament multi-colour print My models are free but if you'd like to buy me a coffee https://buymeacoffee.com/davidlachlanmoore that would be greatly appreciated.…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram @StawiamKlocki.pl to keep up with latest designs Go to Google Sheets to get files list for your LEGO models Watch General…
A fully parameterized project box to customize for any of your electronics projects. Fusion 360 archive and STEP file provided. Material efficient, quick to print, dust proof. Requires 4x M3 Screws, 6 to12mm long. If you like it or…
This model comes in two different types, if you want just a figure then click on the figure folder, there is a version with supports and one without. If you want a posable action figure then click on the action figure folders, again, one…
Version 3 (03/22/2026) It's everyone's favorite Eridian! Based off of the blockbuster film Project Hail Mary adapted from the Andy Weir Novel. Print the quantity specified in the file name, the hands are your choice. Print with ASA or…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Amaze! Amaze! Amaze! Straight from the 40 Eridani system (and the official movie website), I have collected and optimized the official Rocky STL files for us leaky space blobs to print at home. While the original files are incredible,…
Greetings, fellow enthusiasts! I'm thrilled to share this 3D printed Raspberry Pi NAS project with you. I hope you find it not only enjoyable but also adaptable to your unique requirements. I am always eager to receive feedback to enhance…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
Źródło oznaczyło ten model jako treść 18+.
This Universal Mount is designed to allow you to connect accessories (e.g. battery banks) to your Project Killswitch. The Universal Mount is comprised of two components (Lock and Plate). They can be assembled using two-part epoxy or…
Printed Enclosure Project for Prusa MK4/S - PrintClosure Info: External dimensions - 520x520x620 (XYZ) Internal dimensions - 490x580x490 (XYZ) Can be printed even on smaller footprint printers (like Prusa Mini). Uses printed pins and…
The included files are a mounting bracket for the Magcubic Projector HY300 PRO. All the models available did not work for me so i had to make my own. The features include Support free design Can print in 2 orientations (Flat and Standing)…
Further details about project can be found here . Project 376 "Yaroslavets" (Ярославец) is a Soviet and Russian riverboat. It was designed in 1953 and since then was manufactured in huge quantities. A lot of these ships are still used by…
I did not make this model, but I would have liked to. The movie is amazing and this print is also awesome.
This is a fully 3D Printed Stirling Engine made by New Zealand ProjectsToPrint (now defunct). It only requires a printer, printer materials and a few basic home tools and materials to make. It is powered by hot and cold water. This does…
An universal mount for Samsung Freestyle projector. It will be used for wall mount but it should work also for ceiling mount. It is shaped to avoid limiting adjustment projector position. There are two 4 milimeter holes, to secure it on…
When doing electronic projects there always is the search for a housing. There are plenty on the market but rarely fit the exact size and usually can not be considered cheap for some molded plastics. In addition much mechanical work needs…
Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…
3D Model Print Instructions Rocky Action Figure Instructions This model includes 2 figure style option: ● Articulated Action Figure (1 body and 11 limb pieces) ● Statue (1 static posed figure) Both model styles include two file options :…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
I 3D printed “Grace” from Project Hail Mary using a free model straight from the official movie website.
A 100% 3D-printed 7.23L custom one-off Mini ITX case sporting dual 4mm tempered glass side panels, a custom watercooling loop with a 45mm thick 3x80mm radiator, and a hand-built custom pico-psu. Project log on SFF Network:…
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
Various Gridfinity models to hold utensils. A specialized bin for utensil pairs, such as table/tea spoons or salad/dinner forks. I found that my tablespoons in particular had trouble fitting into 1u wide Gridfinity bins, so this design…
Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…
Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…
Ever wanted to build an UK Ant weight / US Fairy weight, but you've had no idea where to start? The SVRN platform is a system I've developed and extensively battle tested over the last year to help get you started. The base robot is a 4wd…
To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…
Your favorite Alien comes to life!!!! print at 700% to make him lifesize. I hope you enjoy!!!! An official version of the Rocky model was uploaded to the Project Hail Mary website (available here ). It is dimensionally accurate and highly…
This is a project where I designed and printed a model of the Mothership that belonged to the mighty god Apophis in the Stargate series. The ship comes with its landing platform and has one feature - those retractable pylons that were…
The Samsung Freestyle projector uses low-profile 1/4" tripod screws to attach the stand to the body, and I lost one of mine, so made this as a replacement. It is low profile, so you can still fit the projector in the case with its…
The gridfinity system from Zach Freedman ( https://www.youtube.com/watch?v=ra_9zU-mnl8 ). called out to me, but I was similarly inspired by the modular project case design by Alexander Chappel. So this is a 4x5 gridfinity compatible…
This is my 3D printed model of the Ha´tak class Pyramid ship from the series Stargate SG-1. Model is completely made by me with a sole idea to be assembled like a lego. No glue is needed at all. If you want to make it for yourself, here…
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Has a 10mm flat bottom to print on bed. SIZE: 20mm ball SUPPORTS: NO BRIM: OPTIONAL
This is a perfect replica of the Dovetail System by Microjig. Here two types of Track Nuts bots need to be used with M5 Insert Brass Nuts and two kinds of track screws: one for M5 Bolts and the other one to be used with M5 Insert Brass…
Been wanting to do a full size K2SO for my Man Cave for a while and I see there is a really cool one over here http://www.thingiverse.com/thing:2038000 ,but I found this really detailed model over with the guys on FacePunch.com "Only…
Version 1.2 Added 2 new parts that are specific to mounting in the top “Pie” location. TopHoloFrameServo and TopHoloLockRing. Intended Design/Use I designed these parts for mounting MG90S servos and Astropixels to MrBaddeley's MK4 R2-D2…
This will be an on going project of scanned portraits of makers from YouTube and Instagram. Download your favorite maker. Collect, modify and print them all. This project is made possible with assistance from Shining 3D and the Einscan HD…
ball diameter 12 mm with bevelled bottom
Trojan horse , huge hollow wooden horse constructed by the Greeks to gain entrance into Troy during the Trojan War . The horse was built by Epeius, a master carpenter and pugilist. The Greeks, pretending to desert the war, sailed to the…
*6/11 Update: Still working on some new bell designs to get a better sound. Will post the files and video soon! Updated the mouthpiece files. Note: This is an ongoing project and I will be making modifications to the design as I'm able to…
Last year I designed a linkable knitting loom system that would allow users to add/remove links as they work for increases and decreases. This is FAR more usable than the standard round loom because you can easily modify stitch count and…
This is my Project Trebuchet. 3D printed model a pedestal. More, you can find here on my YT channel: https://www.youtube.com/playlist?list=PLyHwaiEHdyZruxSmANcpdu5kfF3HwPKXv
A Hologram projector prop as seen in the star wars films/tv shows. This design is based off of that seen in the pilot for Obi-Wan Kenobi on Disney+. Adjust scale in your slicer of choice to make sure main body and antennae are at the same…
Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
I decided to share the unmanned ground vehicle project I made to improve myself by publishing all the design files and material list. The design process took 1 week, printing time 1 week (with 2 printers and 0.6mm nozzles). It is very…
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
Description PDF This is the third version of my vertical axis wind turbine. (V.A.W.T.) This third version is completely inspired and modified by the Aeolus project. In the future I will publish other changes after carrying out the first…
This model is the ship from the movie Project Hail Mary which is based on a sci-fi novel written by Andy Weir. If you are using the individual file folder, print the fuel tank 3 times. The main engine file exists in both folders. I have…
These are various styles of projectiles that fit in Adam-M's Catapult Card https://www.printables.com/model/211679-catapult-card . I printed the catapult in PETG, but didn't have anything to shoot in it, so I made these to fit nicely in…
HydroJug Lid Wrench – Flip Straw Model (40oz Traveler / Classic) This is a 3D printable wrench designed specifically to fit around the HydroJug flip-straw lid, making it easier to tighten or loosen the cap without straining your hand. The…
EDIT: Added Version 2.7 .step & STL files Added updated version of the guide (Thanks Tyra_Nerf and the other reviewers) Hi there and welcome! Thanks alot for checking out Mjölnir - We've been so excited to share this with you, that we…
Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…
This box is intended to be customized, the default configuration probably won't work for very many people. Simple changes like box size can be made with the OpenSCAD customizer but due to limitations in its capabilities most of the really…
Project Face Shield is a non profit charity. We are funded by donations. To find out more aboout Project Shield NZ visit us here: https://www.facebook.com/groups/shield.nz/announcements/ This is the fast printing headband design being…
![Modular Display Stand for LEGO Star Wars / DC / City [Main Project]](https://media.printables.com/media/prints/267597/images/8102146_4a778b8f-e3b6-4ded-82a1-d47a535d9e47_03546910-d95f-4a36-8f71-1214f98a583e/cover.jpg)
