Wyniki wyszukiwania: rotated

Sortowanie

Liczymy pasujące modele…

P
Printablescolorful-corvid

Articulated Lizard with Rotated Ankles and Improved Clearances

A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…

Pobrania
4537
Polubienia
301
Ocena
4,77
P
PrintablesMax

Gridfinity Hex Bins Light (rotated grid) all sizes

Note, I accidentally generated these with the hex grid rotated, meaning the flat top was facing up. This might be harder to print as the grid will require bridging, but it does use a little less filament and prints a little faster. Some…

Pobrania
966
Polubienia
433
Ocena
5
P
PrintablesViragored

Articulated Lizard with Rotated Ankles, Improved Clearances and easy to print

The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…

Pobrania
737
Polubienia
46
Ocena
5
P
PrintablesIguanahotsauce

Rotated Honeycomb Storage Wall Mounts HSW

Update: Realized I modeled the countersunk hole in the wrong hexagon for the four piece connector, added insert-for-countersunk-hole-3-rotated-orentation2.stl which matches the non rotated version of this part. I accidentally mounted my…

Pobrania
695
Polubienia
118
Ocena
5
P
Printablesmiak3D

Rotated Longer Command Strip holder for Honeycomb Wall

I hung my honeycomb wall on a cement wall so i needed to use command strips around the entire thing. The original only worked on the top and bottom sides so i rotated the insert piece so that it would fit on the flatt(er) sides as well.

Pobrania
411
Polubienia
86
Ocena
5
P
PrintablesJones

VW Volkswagen Passat B8 phone tray with rotated USB port

I created this VW Passat B8 phone tray because my iPhone 8 with cover didn't fit into the standard one. Rotating the USB port by 90° it has space for phones with a length of up to about 15 cm which is about 11mm more than the standard…

Pobrania
330
Polubienia
50
Ocena
0
P
PrintablesVespercorp

Fan Rotated 90deg- Prusa Filtration System Housing (Remix)

Installation instructions is identical as provided by Prusa at : https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946#362491 If there are any hurdles or request, please feel free to reach out in comment or direct…

Pobrania
286
Polubienia
50
Ocena
4,83

Rotated S-Hook Hanger for Backpacks – Closet Rod Optimized

I designed this rotated S-shaped hook to hang my backpack flat against a closet rod or bar. Unlike a regular S-hook, this one is rotated 90°, so your backpack hangs parallel to coats and clothes – saving space and keeping things tidy.

Pobrania
272
Polubienia
28
Ocena
4,5
P
PrintablesBig Nuts 700

Amogus but scaled, rotated, and flattened

I found that the original model was very small, rotated, and not flat on the bottom, so I fixed all of that in this model so printing is easier You won't need supports for the model if you are printing them small Remix of…

Pobrania
257
Polubienia
14
Ocena
5
P
Printablesrharrison1971

Raspberry Pi 3B+ Heatsink Case for Prusa MK3S (Rotated)

This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the…

Pobrania
251
Polubienia
34
Ocena
5
P
PrintablesAnarc

Kailh Choc Keycap Tilters (Normal + Rotated) x20

Not just shamelessly stolen from Gurtmail but also heavily inspired by Majyk Oyster's x10 grapes, I realized that JLCPCB can actually produce twice as much for about the same price. This obviously depends on the used material. So, after a…

Pobrania
239
Polubienia
20
Ocena
0
P
PrintablesRamjetX

Thrustmaster T300 T500 TX TSPC 70mm hub (30 Degree Rotated)

Hi Internet Sim Racing Fans, Another quick upload by request. This is a remix of my original 70mm PCD Thrustmaster hub adaptor. Except this one is rotated 30 degrees to fit this…

Pobrania
211
Polubienia
23
Ocena
5
P
PrintablesKalooth

Neptune 4 Spool Roller Mod with 608 Bearings (Rotated Threads)

With the original version, tightening the holder into the arm on the printer resulted in the roller bearing surface being on the bottom instead of the top. Backing out the holder so the roller was on the top resulted in it being so loose…

Pobrania
209
Polubienia
26
Ocena
5
P
PrintablesUGhpbAo=

Remix - Delta-P V2 with rotated inlets

Remix of the V2 Delta-P duct rotating the inlets to even the airflow. For installation details detail see original model by teookie. STEP file included. Print in ABS/ASA with 4 perimeters, no supports needed.

Pobrania
208
Polubienia
23
Ocena
5
P
PrintablesIguanahotsauce

HSW Pins / Hooks - Rotated Print Orientation

I found that even with good layer adhesion the original model was not very strong because all forces were being applied in the same direction as the layers instead of in the direction perpendicular to the layers. I remixed the original…

Pobrania
202
Polubienia
36
Ocena
0
P
PrintablesChriswak

Mini Cooper sun visor glasses holder (rotated for print)

I use https://github.com/eth0up/prusaslicer-3dprintremote which can take the URL of an STL and slice/print/upload to the printer from a web interface, provided that a model is already in the correct orientation.

Pobrania
181
Polubienia
21
Ocena
5
P
PrintablesTxGnRnr

Unifi Protect G4 Instant Camera Mount 22.5 Degrees Rotated

I needed to mount a new Unifi Protect G4 Instant Camera on a wall, but I need the camera turned to view sideways along the wall. I found a suitable wall mount on Thingiverse by darklis: https://www.thingiverse.com/thing:5393420…

Pobrania
167
Polubienia
17
Ocena
0
P
Printablesfryc88

Sovol SV06 Plus SV01 Pro rotated LCD bracket

I had to install a printer the other way round for now, so to keep using the screen I needed a new bracket. This is one of my first models ever, so please excuse if things could have been done better/other way, however for my purpose it…

Pobrania
152
Polubienia
37
Ocena
5
P
PrintablesMad89

Creality Ender V3 SE/KE Filament Sensor Mount - Centered and rotated

Rotated mount for filament runout sensor to fit in tight enclosure

Pobrania
130
Polubienia
18
Ocena
0
P
PrintablesJoey

Arduino Mega DIN mount rotated 90 deg

Same as the original file, just rotated 90 degrees. I don't know if it was the model or the print, but the 'handle' part of the spring needed some persuasion to be broken free. For what it's worth, I didn't have the problem with the…

Pobrania
123
Polubienia
14
Ocena
4
P
PrintablesFerfi

Gravity Broom Holder but rotated 90°

In order to accomodate the brush and a dustpan, my solution was to rotate the broomholder and add a hook. Mounts to two 4mm countersink screws (with 7-8mm heads). Also the gear is now full.

Pobrania
119
Polubienia
25
Ocena
0
P
PrintablesTraincrossin

Eurorack Case Travel Skiff 38HP (34HP + 4HP Rotated Row)

I wanted to print a portable eurorack case that could could be powered via a USB power bank and played on the go, so here's my 38HP travel skiff! I utilized the rotated 4HP 3U for power, multiple, and mute modules. No supports needed, but…

Pobrania
118
Polubienia
26
Ocena
5
P
Printablesmjseabright

Rotated Octagon Lampshade

A cool geometric lampshade. It's made to fit on a table lamp base, but could also fit on a ceiling hanging light fitting. Designed in OpenSCAD. The main dimensions are parameters at the top of the scad file and are easy to mess around…

Pobrania
117
Polubienia
27
Ocena
0
P
PrintablesS S

HSW Hook rotated

Hook for the wall turned 90 degrees

Pobrania
114
Polubienia
16
Ocena
5
P
PrintablesDave in TXK

Q2 Spool Holder Bracket plus Box Splitter Rotated

Rotated the bracket for the Q2 Box 4 to 1 Splitter/Manifold to horizontal so that the 4 PTFE tubes entering the manifold have a lesser radius curve and a longer ‘straight path’ before reaching the manifold. Others found this orientation…

Pobrania
101
Polubienia
11
Ocena
5
P
PrintablesArek

Raspberry Pi 3B+ Fan Case for Prusa MK3S (Rotated) [Fusion 360 source]

Modification of https://www.printables.com/model/74422-raspberry-pi-3b-heatsink-case-for-prusa-mk3s-rotat with 30x30 fan mount added. M3x10 screws were used (and painted black with marker) + M3 nuts to mount fan. If your fan has low…

Pobrania
99
Polubienia
9
Ocena
5
P
PrintablesKLAPI

HSW Rotated Insert Hooks, Preferred print orientation, STEP files for remixing

Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…

Pobrania
95
Polubienia
13
Ocena
0
P
PrintablesRobin Tomaselli

PS5 Digital Horizontal Stand 150 mm rotated

Took the remix of this and rotated parts so support is no longer needed.

Pobrania
85
Polubienia
3
Ocena
0

HSW modular stuff holder/basket/bucket remix OG hexagons 90° rotated

The STL file contains a collection of buckets in different sizes with OG Hexagons. Depending on the bucket sizes and number you want to print, you can split STL to individual objects. Open the file in Prusaslicer, right-click the model.…

Pobrania
83
Polubienia
16
Ocena
5
P
PrintablesRP1_MVac

Rotated Insert

Rotated Insert for Idiots like me who mounted their honeycomb wall wrongside up

Pobrania
82
Polubienia
16
Ocena
0
P
Printablestommekk

Betteri BC01 connector angle housing - remix with rotated connector

Maybe you print it in two parts (lay it half cutted sideward onto the printing-bed) and glue both parts together after printing. I never printed it by myself so far (I only implemented the remix because of a user-suggestion).

Pobrania
76
Polubienia
4
Ocena
5
P
Printablesmjseabright

Rotated Pentagon Lampshade

A cool geometric lampshade. It's made to fit on a table lamp base, but could also fit on a ceiling hanging light fitting. Designed in OpenSCAD. The main dimensions are parameters at the top of the scad file and are easy to mess around…

Pobrania
76
Polubienia
10
Ocena
0
P
PrintablesAdam

HSW cable bypass inserts rotated 90 degrees

Cable management for HSW for placing the cable at the top or bottom of the HSW.

Pobrania
73
Polubienia
16
Ocena
5
P
PrintablesNickolas Butler

Simple Twist Open Mushroom Rotated Threads

I rotated the threads of the bottom piece 7 degrees so that the dot on the top piece lines up centered when twisted on.

Pobrania
71
Polubienia
10
Ocena
5
P
PrintablesKing Ant

Rotated Gunpla Display Arm for Honeycomb Storage Wall

Rebuilt from step file of Honeycomb Storage Wall Insert-Full and copied the measurements of the original base by GunplaMark! Now you can choose the proper one for however you mount your HSW.

Pobrania
70
Polubienia
13
Ocena
0
P
PrintablesKLAPI

HSW Rotated Insert Calliper Holder, STEP files for remixing

STEP files included for remix support not needed if print orientation like in the picture. Please share your makes Have fun :)

Pobrania
67
Polubienia
2
Ocena
5
P
Printablesmalungo3d

Ubiquiti G4 Instant Corner Adapter Rotated Down

This adapter enables mounting of the G4 Instant in a corner 22.5 degree angle rotated down

Pobrania
65
Polubienia
4
Ocena
0
P
PrintablesShane Weastell

Westys PG7 (Hartk mod) Galeleo 2 Umbilical support bracket- rotated 90°

printed with ABS No Supports 40% infill Voron PIF settings

Pobrania
65
Polubienia
10
Ocena
0
P
PrintablesGanti

Filament Spool Holder for ASWX1 (Rotated Stand by 90°, Remix)

This is a remix of https://www.thingiverse.com/thing:3442347 Features same rolling mechanism he stand is rotaded by 90 degrees shortend the base removed the filament guide This was designed for my Artillery Sidewinder X-1, but should fit…

Pobrania
63
Polubienia
2
Ocena
0
P
Printablesthall72

Lego Compatible (412.dat) Arm Piece with 2 and 3 Fingers Rotated

This model is compatible with the lego system.

Pobrania
62
Polubienia
14
Ocena
0
P
PrintablesKLAPI

HSW Rotated Insert with 13.5mm Hex Hole, 2 print positions, STEP files for remixing

STEP files included for remix 2 options of print orientation Please share your makes Have fun :)

Pobrania
54
Polubienia
6
Ocena
0
P
PrintablesTae

Pull copter ring rotated 90 degrees

Pull copter ring rotated 90 degrees. Not tested. If you print it, please post a make ;)

Pobrania
54
Polubienia
8
Ocena
5
P
PrintablesThorb

HSW self-adhesive double-sided tape fixture rotated 90 degrees

I wanted to build a new “Honeycomb Storage Wall,” but I was asked to avoid drilling any holes so it could be removed without leaving any marks. To solve this, I designed a bracket based on the hollow inlays, which can be easily attached…

Pobrania
53
Polubienia
14
Ocena
0

Universal Scraper Rotated

The Universal Scraper rotated, so you don't have to rotate it

Pobrania
52
Polubienia
5
Ocena
5
P
PrintablesAnuragD

Hex wall rotated insert - trimmed

Rotated insert for people who have installed their HSW wall with pointy side up. This remix just makes the adhesion a bit better. Original model has a lot of small parts that are not printing well at large volumes. So trimming the base a…

Pobrania
48
Polubienia
4
Ocena
5
P
Printablesrafi

cable chain rotated anchors

vertically moving chain links

Pobrania
44
Polubienia
5
Ocena
0

Print sheet holder for 6 sheets with OG HSW Hexagons 90° rotated

Remix of Staggered print sheet holder shorty 6 x 100 mm - OG HSW Hexagons 90° rotated

Pobrania
44
Polubienia
11
Ocena
0
P
PrintablesVinge.

Dice Tower - Direct Print - Rotated

Rollup Dice Box - Tower Core by 3D Printy Remixed by chuyskywalker A version rotated to fit the base made by 3D Printy. EDIT: Fixed the top part of the tower core, so that the notch is oriented corrected.

Pobrania
44
Polubienia
7
Ocena
0
P
Printablesctbaker

Rotated MCM Chopped Fingers

REMIX OF https://www.thingiverse.com/thing:2996289 Rotated the piece the spring goes into so the fingers will be pointing to the side and also a version where the fingers are pointed in the same direction as how it looks on their shirts…

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesJJT

Rattlesnake Rattle (rotated 70991)

This is a modification of thing "Rattlesnake Rattle" by trishabelly thing 70991. I had a bunch of problems printing the original because some of the parts were floating above the bed. Split is the original cut in half and the two parts…

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesKLAPI

HSW Rotated Insert Pliers Holder

support not needed if print orientation like in the picture. Please share your makes Have fun :)

Pobrania
36
Polubienia
5
Ocena
0
P
Printables@PRYMOPRINTS

Mount UCG for SKÅDIS - Rotated Pattern

Mount for Unifi Cloud Gateway Ultra (UCG), designed for SKÅDIS.

Pobrania
36
Polubienia
2
Ocena
5
P
PrintablesChriswak

Kids T-Shirt ring (rotated for print)

I use https://github.com/eth0up/prusaslicer-3dprintremote which can take the URL of an STL and slice/print/upload to the printer from a web interface, provided that a model is already in the correct orientation.

Pobrania
36
Polubienia
8
Ocena
0
P
PrintablesLuby

Rotated 360° wheel + standard wheel

360° wheel - needed: 1x bearing 608zz 3x screw M3 30mm 1x screw M3 20mm 4x nut M3 4x wood screw (depend on your project) Standard wheel - needed: 1x bearing 608zz 3x screw M3 30mm 3x nut M3 4x wood screw (depend on your project)…

Pobrania
32
Polubienia
7
Ocena
0
P
PrintablesBamBam Design

Rotated Heart Bowl - Turned 180°

Rotated Heart Bowl - Turned 180° The beautiful, unique rotated heart bowl. A fast printing bowl with a special shape. The bottom is a rotated heart and the upper heart goes in the opposite direction. Dimension: 140x 130x 40 Print: No…

Pobrania
31
Polubienia
5
Ocena
0
P

Pliers support for honeycomb system that are rotated 90 degree

Support for two pliers to be stored on the honeycomb system. The slot for each one measures 12mm (0,472") x 37,6mm (1,48") Note: It is honeycomb wall is 90° rotated.

Pobrania
30
Polubienia
16
Ocena
1
P
Printablescorona

ROTATED - HSW Pegboard Dual/Fork Attachments Adapter

Remix, this is the description from the original -- Reuse old pegboard dual/fork attachments in the Honeycomb Storage Wall. Both two and four H4 Inserts Supported (M3 probably fine). Printed in PLA but PETG fine. 0.6mm nozzle, 0.3mm layer…

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesCM 3D Printing

Litophane lamp pentagon (can be rotated with a bearing)

I made this for own use. Enjoy and download

Pobrania
28
Polubienia
2
Ocena
0

K1_K1C_K1_Max_Spool_Holder_v2_rotated_90.stl

Original design of Creality K1 / K1C / K1 Max Spool Roller v2 does not compatible with K1 SE Side Filament Mount (see photos), that's why i remixed Maximus' model

Pobrania
27
Polubienia
2
Ocena
0
P
Printablesjcjames_13009

Hexagon Hook for Prusa MINI Base (V2 Rotated)

This is just a rotated version (15 degrees from the hexagon) of the Hexagon Hook for Prusa Mini Base designed by Yasir Bilgic The original model wasn't exactly in a vertical position when placed on the leg. I just rotated 15 degrees the…

Pobrania
27
Polubienia
7
Ocena
4
P
PrintablesKelevra-5137.5

GoPro_Like_Joint_Case_Clip-90°-rotated

GoPro_Like_Joint_Case_Clip-90°-rotated

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesPieter Koenen

PTFE holder used for the injection molded Spool holder - R4 with the hole relocated and rotated.

This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesRamjetX

RamjetX Thrustmaster T300 T500 TX TSPC 70mm Hub Adaptor (90 degree rotated - 4 Screw Option for F1 Rims)

Hi Internet DIY Sim Racing Peeps... This was a message request for a mod to the Thrustmaster 70mm hub adaptor by SpaceKnight. It's the 4 screw option for a project he's working on and wanted it 90degree rotated for his mounting needs. By…

Pobrania
26
Polubienia
8
Ocena
0
P
PrintablesShrek69

Firefly 1S FR16 Nano Baby Quad - battery holder GNB 720mAh - rotated 90 degrees

Firefly 1S FR16 Nano Baby Quad - battery holder GNB 720mAh - rotated 90 degrees.

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesStephane jaglin

Pliers Holder for HSW rotated 90 degrees

Just added a rotated HSW insert at the back :-) Printed on PLA or PLA+, high speed fine, I print it wit support flat on the diagonal slope.

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesJakub 3D

Divider for IKEA Kallax Drawer – Rotated Eighth

EN: This remix is based on the Divider for IKEA Kallax Drawer by gskollnau . The original model includes two heights (100 mm and 50 mm) and three division types (quarter, eighth, and sixteenth). It was missing one variation — the eighth…

Pobrania
25
Polubienia
1
Ocena
0
P
Printableskenfuhr

Raspberry Pi Camera V3 NoIR Wide rotated mount

updated model to support the V3 NoIR wide camera

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesJo

Pop Funko Holder for Honeycomb wall - rotated

This sleek and functional Pop Funko holder is specially designed to integrate seamlessly with the honeycomb storage wall to display your collection. Perfect for collectors who want an organized yet visually appealing display solution!…

Pobrania
24
Polubienia
1
Ocena
0
P
Printablesroman_hegglin

BumpBangle - rotated and solidified

Thanks to cunicode for this great design! http://www.thingiverse.com/cunicode/designs I needed a solid stl to print it in "Vase mode" or "Joris Mode", and here it is. Category: Bracelets

Pobrania
24
Polubienia
6
Ocena
0
P
PrintablesHervea

HSW Corner joiner - connectors rotated 90° - Fixed for Bambu Studio and other slicers

HSW Corner joiner - connectors rotated 90° - Fixed for Bambu Studio and other slicers. SSD holder can be found at : https://www.printables.com/model/1300324-hsw-ssd-or-nvme-holder-with-usb-a-and-c-caps-for-h

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesKLAPI

HSW Rotated Insert Dual Plier Holder

support not needed if print orientation like in the picture. Please share your makes Have fun :)

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesJo

HSW shot glass holder - Alt Rotated with Hollow Inserts

HSW shot glass holder, Alt Rotated for Honeycomb Storage Wal l. Comes in 28mm, 36mm and 41mm. Bambu Labs PLA Basic Grey, 0.4mm nozzle, 0.2 mm layer height. Supports needed for Hex connection. Used default Bambu labs support settings,…

Pobrania
20
Polubienia
2
Ocena
0
P
Printablesbalazsgrill

Nerf mag skadis holder - rotated by 45°

I took the skadis mag holder made by Inspir0n and rotated them by 45°

Pobrania
18
Polubienia
11
Ocena
5
P
Printablesjoostme

Maxi Cosi Connector - Rotated Base

The original connector only allowed the USB C cable to be connected on the front/back of the babyphone holder. This didn't fit in our case, as we had a wall behind the holder. I simply rotated the base to allow the USB C cable to be…

Pobrania
18
Polubienia
0
Ocena
0
P
Printablesalbaras

Garmin 51mm Fenix Quarter-turn Bike Mount (rotated 90º)

Same as original. Print settings: 15% cubic infill, 0.12 mm layer height, 0.4 nozzle, 5 walls.

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesjohn rhoades

Rotated Pattern Die

To avoid major print issues, the die is 2cm x 2cm x 2cm. If you want to, you can scale it down in your slicer to 75% scale, which is the size of a standard die. (1.5cm x 1.5 cm x 1.5 cm) It is also recommended to clip off the corners, as…

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesEscrich

Orbiter extruder rotated 180 degrees on EVA 3 carriage, and new belt attachment

May be you like to use Eva 3 carriage, but is not possible to mount it in your current printer, with this some modifications yo can change the point for belt attachment, and mount an Orbiter extruder simply turning it 180 degrees over Z…

Pobrania
17
Polubienia
8
Ocena
0

Greater than Stud Button unless rotated 90 or 180 degrees

The greater-than sign is a mathematical symbol that denotes an inequality between two values. The widely adopted form of two equal-length strokes connecting in an acute angle at the right, >, has been found in documents dated as far back…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesJannis Jung
Pobrania
16
Polubienia
5
Ocena
0
P
PrintablesTDeV

Juwel Easyfeed - Rotated

The Easyfeed always makes a mess. The flakes fall to the side or stick and rot because of the condensation on the chute or funnel. With this rotated placement of the Easyfeed, that is now a thing of the past. Fits into the existing cutout…

Pobrania
15
Polubienia
2
Ocena
0

Modern Vases, normal and rotated

Modern Vase, normal and rotated. Print in Vase Mode --> cut off the top.

Pobrania
13
Polubienia
7
Ocena
0
P
Printablescaracarn

Ploopy A Plus Rotated Wrist Rest

The Ploopy A+ is a great trackball, but by default the scroll knobs are at the bottom, requiring you to tuck your thumb under your hand to use them. Or to move your hand entirely. Both are uncomfortable, in my opinion. This base rotates…

Pobrania
13
Polubienia
6
Ocena
0
P
Printablesak1r4 s4t0h

RC3S - Rotated Customizable Spool Support Structure

# RC3S - Rotated Customizable Spool Support Structure --- ### Remixed from 3 Sources: - [Anycubic Kobra 2 Pro - Rotated Spool Holder - V1](https://www.thingiverse.com/thing:6387319) by **Sbaro89** - [Anycubic Kobra 2 - Rotated Spool…

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesprobertson

Rotated Buffer Bracket_Frame_Slim

I wanted to be able to mount my buffer outside of my (old-school Lack) enclosure. I first tried the hanging mount, screwed into the tabletop that forms the bottom of the enclosure, but it required the tubes to have to twist quite a bit.…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesKLAPI

HSW Rotated Insert for GlueStick

Inner Diameter = 28mm , my glue is 26mm. I think its common size for GlueSticks.. 12/02/2025 - Rotated Insert for GlueStick or Anything else diameter 42mm

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesStefan

Screwdriver Holder bar for rotated HSW - Parametric

Use this only if you have a rotated HSW. Open the file in Fusion and set the required size by specifying the number of “units” (the number of hexagonal cells) in solid > modify > change parameters Use the clips and studs from the original…

Pobrania
12
Polubienia
0
Ocena
0
P
Printableskikko

Neptune 4 UBBI reverse bowden rotated 90 deg

It is a redesigned model and similar to the original, but with the UBBI rotated 90 degrees to be able to connect the runout sensor in front using this UBBI model . This is the filament HUB model used in the photo. It does not require…

Pobrania
12
Polubienia
4
Ocena
0
P
PrintablesPieter Koenen

PTFE holder used for the injection molded Spool holder - R4 with the hole relocated and rotated for a spool that is less wide.

This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…

Pobrania
11
Polubienia
0
Ocena
0
P
Printablesandrew632
Pobrania
10
Polubienia
2
Ocena
0
P
Printablescaesar_1111

SK-Tank part cooling fan duct - rotated fan

..first.. .its a clone of the SK-Go² duct for BL touch and the ones Ernest put on github... ...so if you can help me with the thing numbers I can also put tin the remis information. I just couldnt find them.... .now to the duct... ...for…

Pobrania
10
Polubienia
3
Ocena
0
P
PrintablesGB

DeckMate kickstand with locking hinge - 90 degree rotated interface

ClassicGOD's awesome deckmate kickstand, but the interface is rotated 90 degrees so that's compatible with my steamdeck case backplate During bumpy rides, the deckmate sometimes decouples when I was using the stand The original top part,…

Pobrania
9
Polubienia
2
Ocena
0
P
Printablesbdb

Black & Decker RTX Rotary Tool mod for Dremel chop - Rotated Arm

The arm for the original/parent model did not allow the tool to align properly. This version has the screw thread rotated 100º so that the switches are top centred.

Pobrania
8
Polubienia
1
Ocena
0
P
Printablesrbjam

Railcore rotated Z yokes

In the original Railcore II design the X axis travel is limited by part of the Z yoke blocking the heatsink fan on the low side of the X axis. On the high side of the X axis, is the part cooling fan that collides with the the Z yoke. This…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesRylanRoot

rotated pencil cup

its like my previous model but rotated

Pobrania
6
Polubienia
1
Ocena
0
P
Printablestimh2870

Rotated_Pi_Zero_DIN_Rail_Mount

Rotated version of the Pi Zero mount.

Pobrania
6
Polubienia
3
Ocena
0
P
PrintablesChriswak

Hakko Omnivise Knob Cover (rotated)

I use https://github.com/eth0up/prusaslicer-3dprintremote which can take the URL of an STL and slice/print/upload to the printer from a web interface, provided that a model is already in the correct orientation.

Pobrania
6
Polubienia
1
Ocena
0
P
Printablesnmtimo

Epilogue GB Operator Skadis Holder - rotated version

Someone asked if I could create a version of the GB Operator Skadis mount rotated by 90 degrees — so I did. This mount allows multiple GB Operators to be used side by side, even with the USB cable plugged in. It keeps everything neatly…

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesNo_fronts

Ikea Galant Locking Bar Endcap 180° rotated

I have an older Version of an Ikea Galant Rolling Drawer. After moving to an new home I lost the bar that interconnects the diallock with the drawer lock on the side. Ikea kindly sends out spare parts, but the newer revision has some…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesF C

HSW short hook (rotated)

A short hook for suitable for a HSW wall rotated by 90 degrees I printed it vertical on Prusa Core One so the printing lines make it lock once inserted and the flat surface is the most visible one

Pobrania
4
Polubienia
3
Ocena
0
P
PrintablesPablo S

Spacer with rotated holes for shower column

I have created this piece to fulfill my needs on a shower column from Leroy Merlin, precisely the item Column without battery Trend Kuchinox, purchased in Poland. The outer diameter of the item support is 40mm and it is smaller than the…

Pobrania
4
Polubienia
1
Ocena
0