419 modeli
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A humangear GoTubb ™ inspired container, but much more minimalist, and much more fidgety! If you can print with multi-material, then you can even make the container look like oreo or macaron cookies! :) The Minimalist-10: Diameter: 35mm…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
=== Update === Uploaded a mirrored version plus spool holder rod for a third spool in the enclosure. Perfect for drying filament while printing other stuff. === Update === Second spool holder for original prusa enclosure. Ideal for manual…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Evolution from model https://www.printables.com/model/464458-prusa-mk4-filament-guide with new original design. Improvements - Guide is placed higher up allowing for printing full height of the printer. - All parts now snap together, no…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
The design is sturdy and saves about 800 g compared to a metal version. The dovetail uses the Losmandy mount points (3'') of the Celestron AVX mount and has alignment stops for easier mounting at reproducible positions. The parts are…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wallet with eject mechanism. Credit card sized. Includes optional coin and paper money holder. New in second edition sturdier design better fitting lid and longer lid screw more rounded edges fixed fitting issue with end cover Print…
Wydruk około 3,71 €–4,54 € nettoWstępna wycena jednego wariantu
A second filament spool holder for the creality ender 3 s1 pro printer
Wydruk około 3,49 €–4,26 € nettoWstępna wycena jednego wariantu
I made this spinning top card (ISO/CEI 7810 ID-1) to enter the Kit Cards contest. The credit card format follow the ISO standard but may be a little bit too thin for optimal use, but at least it works and fits in your wallet ;)…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was very tired of having my airpods end up all over my desk, so I made a holder/stand for them. I also made a version of it that has a logo on it. It is 100% compatible with first generation airpods case. It should be compatible with…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
angeregt durch diesen Beitrag: https://forum.prusa3d.com/forum/deutsches-forum-original-prusa-mini-benutzermodifikationen-octoprint-gehause-dusen/mini-lufterapp/#post-538903 habe ich mir eine Lüfterhalterung für den Mini…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for the second nozzle that comes with the HAZET 2162M grease gun. If you, like me, don't know where to put it this comes in handy. The nozzle is secured by a tight fit that wraps around the thread by more than 180°.…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Memento mori - set of four pictures of death (two colours)
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
A simple keychain that states the obvious. Printer: Ender 3 Pro Layer height: 0.12mm Filament: PLA Slicer: Ultimaker Cura For colour swapping, i just paused the print at a layer and manually swapped my filament
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Simple and prints quickly (~10 minutes on my printer). This keychain is based off of a picture I took of my xB so dimensions may be off slightly. About 2 3/4" x 1 1/8" x 1/8" for the original model sizing however should scale nicely for…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
DE: Dieses Modell ist ein Remix des ursprünglichen Mistral SUP Pump Adapters. Ich habe den Adapter speziell für das Ventil der QUECHUA Air Seconds Comfort ( Link ) Luftmatratze angepasst. Ziel war es, keine zusätzliche Pumpe kaufen zu…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
If you have or know someone who has a meade lxd55/75 SN10" and needs to center the secondary, I provide you with the 3D files of these parts that allow you to set the concentricity and rotation angle of the secondary mirror with great…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
remix for the Hinged Lid
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just slide the individual colors into the template. Must use a hammer.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
As a 30STM fan, I wanted something to decorate my room with. Few minutes in CAD and it is done now :)
Wydruk około 2,97 €–3,62 € nettoWstępna wycena jednego wariantu
I printed the egg in PLA with 0.1 mm layer height and organic supports, on build plate only, and up to 30° overhang. I removed the supports, cleaned the print, and inserted a TPU filament in the groove (about 64 cm in length).
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…
Ender 3 S1 secondary spool holder. Allows for you to hold 2 spools on the existing bracket.
Perfect collection to print metallic or cartoonish. These are the characters included: - TEN SHIN SHAN - GOKU - CHAOS - KRILLIN - YAMCHA Thank CREATIONSISHI for this spectacular pack
This is an insert / organizer for 7 Wonders (Second Edition) with the Edifice, Leaders, Cities, and Armada expansions. It features: * Separate and labeled trays for all of the cards. * Two trays for the money and debt tokens, one tray for…
I had a few extra tools I wanted to store, and loved the tool tray that rotates out, so I modelled this. Makes a great pairing with the original. It does not block any fans underneath.
Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…
MSI does not include the bracket for the secondary NVME SSD slot in the box with the laptop, you have to contact their RMA service for them to send you the bracket ! So that is what I did, and this model is as close of a replica as I…
Edit 6/29/2024: Thanks to feedback from users Vee and MiniVoeter I've made some changes and updates to the insert! First, it's taken me a while but I've finally designed a complete set of hexagon lids for all existing lidded containers.…
Update 4/17/23: I posted a redesigned version of this insert to also include the Edifice expansion in the base box. You can see that version here . This is an insert / organizer for 7 Wonders (Second Edition) with the Leaders, Cities, and…
This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place. I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added…
Accessories for Betrayal of the Second Era boardgame from Chip Theory Games. Mini Chip Organizer This is a drop in organizer to sort the mini chips into their three categories: Overland, Stats, and Skills. There is space for 16 additional…
This allows adding a second 2.5 inch dust port onto my Rigid sander. This better matches the airflow requirements for my 4 inch dust collector. If you see my 4 inch PVC dust collector project I have a splitter to go from 4 inch to two 2.5…
I designed some medals for a Minute To Win It competition we were having, and thought that someone else may find them useful.
This is an unofficial insert for Chip Theory Games' Elder Scrolls: Betrayal of the Second Era. I wanted to create something that would make setup and teardown as painless as possible while also allowing for modular setups based on your…
Printed it on a Geeetech I3 with 0.6mm nozzle to cut the printing time. The original model used a hard plastic (PLA/PETG). Tried it with Esun Grey TPU and it turned out acceptable. Used supports but they were tough to remove. Printed the…
I did a small video tutorial on how easy it is for any one to achive https://www.thingiverse.com/thing:3077839 check out the link. Print instructions Category: 3D Printing
The Second Sister's double-sided lightsaber, with rotating segments so the ring can fold and unfold between half and full circles. silver-core_1x is meant to be printed without supports (supports are in the STL), but all other parts can…
After a number of suggestions that the side ear flaps were not arched back enough, I decided to revamp this model where possible. It has sat in my finished folder for several months so have only now had the time to upload. Hope you enjoy…
You need to print player_tray and player_cards 4 times and minions six times. This insert is for second edition (square box). If you looking for first edition check out this design . Do you like my design? You can buy me a coffee :)…
Intro This is a remixed version of the War of the Ring quick setup inserts by WerfWerf . All I have done is split the trays up into smaller sections so that they can be printed on a 250mm x 210mm bed like the Prusa MK3S+. The original…
Remixed the https://www.printables.com/model/941851-second-desiccant-container-for-polymaker-polydryer since it was a bit rough to print. The circles were taking up a lot of time and the support for the upper overhang wasn't nice to have.…
Use your phone or tablet together with your laptop as a second screen. Can be stretched/shortened to fit laptops of different sizes. Print profiles included. Differences between versions: Macbook version - use this version if you have a…
Miniatures of all detectives and monsters from the add-ons suppressed memories and recurring nightmares miniatures. Mansions of Madness Second Edition — Recurring Nightmares: 8 detectives: Michael McGlen, Sister Mary, Gloria Goldberg,…
The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…
This is a complete rework of the "PERFECT Gloomhaven/Frosthaven Standee Set with MAGNETS". It is better in every way. Main features: HP counter visible from both sides! Rounded edges of monster and conditions holder (should not scratch…
I opened up a brand new copy of Camel Up (Second Edition) a few days ago and found that the pyramid that dispenses the dice was dropping multiple dice almost every time. When I searched about it online it seemed like others were having…
This holder has been designed to be glued into the hull of the fishpro. (The photos here are of a larger Lithium battery on my first version of the battery holder.) I have designed the holder to have a large surface area touching the hull…
You will need one or two rubber bands. Population Cubes should not fall though holes unless you pressed the device on both sides. In case you want to modify it, I attached a FreeCAD project as well In case you want to store it in the…
This is the Original file. Contact my Email at [email protected] if you would like modifications or permutations of the design to your specific needs. Despite the claims of Spencer3D on Ebay to the contrary. I also provide printing,…
This adapter enables the use of a car/bicycle pump to pump up an Air Seconds tent to the 7psi/0.5atm that is required. Can also be used for mattresses and other inflatable camping equipment. Be aware that a car/bicycle pump can easily pop…
Hope all of you have seen the tv show "The Bear" This little sign is very important part of Season 2. It is a dead simple design, but screen accurate and I made it for a friend. Thought why not share it.
A Hadley remix for the secondary holder - The secondary bolt and washer are added via a slot without any need to consider the mirror - so you can glue the mirror in place any time you like. There is also no chance of backing out the…
Used the parametric Fusion 360 file from TheSameNameTwice, 80 x 160 x 25mm inside. Tweaked a couple chamfers for ease of use, as this box is so shallow, it flexes a bit less. Updated: With a gasket that actually fits, should be made out…
This print houses a single Adafruit QT PY board with USBC connector. The top snaps shut and has two button cutouts to allow you to press the reset / PIN9 button. It has a small slit in the back for cables - I use it to wire in external…
Originally published here: Microphone raising trophy, second model by tato_713 - Thingiverse I made this as a reward for the first place of a freestyle rap contest, much like my first trophy model . Originally it had graffiti-like…
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
Guide to Adding a Second Aux Part Cooling Fan on a K1 Max Parts List: Delta brand fan from Digikey http://bit.ly/4aXW0Jd (if you purchase two of these to replace the original fan with this upgraded quieter fan the you will need the heat…
Zombicide Second Edition Dashboard
🌿 The Diadem of Leaves – The Second Crown Mini story: When the Enchanted Forest lost its royal crown, the fairies brought forth the Diadem of Leaves. The missing stone in its center became more than a loss — it became a prayer, a symbol…
My take on SkyWatcher Heritage 130P improvements. This is definitely not the first redesign of this affordable but capable telescope. Depending on your goals it may not be your best option, see lordzurp's award-winning effort if you want…
Side note: The "Download All Files" button seems broke on thingiverse. Just single download every file, and you are good to go.... Dear thingiverse community, since I am printing on a glass bed and got some PETG (transparent) from a…
Remix Information Modifications to the "Wandering Hour Clock" by clockspot Most details are included here but for full build details see my web page for this clock. Geneva Drive Clock…
push into the fan, then push the fan into place. one and done. face down, no supports, small layers preffered. 10 min avg print time for 3
Some models for Company of Heroes the board game, with som remixes of others' creations and some original models. Infantry movement tray - resized from https://www.thingiverse.com/thing:4900838 by Northernmenace, to print in clear PETG…
I wanted to add on my existing Belkin BoostUp wireless charger (model F7U054), so remixed this. (and removed the ‘D’ logo ;) https://www.belkin.com/special-edition-wireless-charging-pad/P-F7U054.html…
This iPad Lift Stand is designed to raise your iPad to the ideal height so it aligns perfectly with a MacBook display , creating a comfortable dual-screen workstation . It’s perfect for people using their iPad as a second monitor with…
I always wanted to sit on the couch with laptop but also have 2 screens. I always knew I could use my iPad as a second screen via Sidecar and I just wanted the iPad mounted above my laptop. So after 50+ iterations, we have UNIMOUNT. It…
Here are some modular lightsaber parts to transform my Cal Kestis/Jaro Tapal lightsaber into Cal's double bladed lightsaber made from parts of Cere Junda's saber. If you want to make the version with Jaro Tapal's sleeve you can find that…
A way to make a second hand in PrusaSlicer for the Düdel Clock if the mechanism allows. There is no new model. The 3MF file contains only scaled original models, build-in shapes, and negative volumes. The file was created using…
This modified version of the Datum PCB mount allows for 3D calibration using a second fiducial mark! You can find the necessary PDF for the second mark on the OpenPNP wiki here:…
Introducing the Ender S1 Dual Filament Support Arm 3D Print Model Upgrade your Creality Ender S1 printer with our latest custom-designed filament support arm. This innovative model allows you to conveniently accommodate two filament…
Wanted to make up a secondary wall mount for the Dyson V10 as our charging base is in the basement and I wanted a second one on the main floor and y'know stairs. Printed flat on the hexagon side using PLA at 0.2 Layer Height. Added…
This is the second floor of the VICTORIAN MANSION model. Depending on your printer, some components may require some minimum minor trimming. Commercially produced 4'x8' plywood flooring wasn't produced in this country until 1927. So the…
Wacom One PenTablet as Display The Wacom One is a Pentablet / drawing tablet which supports of a 13.3 inch fullhd display, similar to the professional Wacom Cintiq tablets. The connection of Tablet is HDMI in and USB (for Power and…
Setting the second hand while modding a watch can be a real pain. This tool makes it trivial. Most printers can print it fine without supports. This is a fork/variation of Flennery's excellent tool.
Dell Wyse 5070 in Extended (fat) version have a little smaller hole for secondary ethernet port, than normal 5070. So there is small bracket for securing Ethernet port from this : Aliexpress M.2 key A+E RTL8125B network card…
Small container to store the ship stands from the game. fits snugly in the box. (possible to print and ship for a small fee) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .16 Infill: 15…
I remixed some parts for barnEbiss2's Second Edition Ork Dreadnought. https://www.thingiverse.com/thing:4646790 I'd like to add an Ork pilot at some point. I might also make a 3D-printable banner. Category: Toys & Games
This is a skyshard token for the board game Elder Scrolls: Betrayal of the Second Era. Skyshards are collected during Delves, and accumulated in the game as a stack of cards. These skyshard tokens can be collected instead, and can also be…
About Organize all the Encounter, Delve, Specials, and Guild cards plus their respective chips into boxes specific to each region. These were designed in the style that you see with board game insert master js500 and Hextra . I have…
This fits Redit User VykkuF replacement cover (shared with permission) https://cad.onshape.com/documents/621cd0e291925d80f9f11098/w/256af39dc487ebcffbda78e0/e/bc10719f7a26fb2e1b503295?renderMode=0&uiState=6a104f437494deeb2d455f77 redit…
A funnel for refilling plastic bottles 0.5l , 0.75i or 1.0l
I just did a very small remix of the card box design by js500 (thanks for providing the scad files!). I just did not like the additional “Guilds” label and I changed the order of the slots, such that the guild cards are the last slot. I…
Got irritated at how easily the tiles could while playing the game so I created these. They are designed to accept a a 3mmx2mm magnet to snap together. The magnet presses in and no glue is needed for the most part. If glue is needed press…
Secondary mag release extension for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. Hardware Required: 2 - M3x10mm screws Print Orientation: Outer sides facing down.
Updated 4/16/2025 2025/4/16更新 “Pre-checking the shape of the curve” was added. 「曲線の形を事前に確認する」を追加しました。 ---------------------------------------------------------------------------------------------------------- This is a machine that draws…
I needed some of these plastic clips spacers (anti crabbing clips) for my old Everest secondary glazing windows but could not find them online. So lets print them
This remix corrects a small bug where a curve in the finder mount obstructs the lip of the telescope (lordzurp is aware and is updating). BUT the real reason for it is to add a larger mount for a Crayford 1.25" focuser - 71mm base plate…
Inventum AC701 Secondary Intake Hose Adapter / Dual Hose Conversion This is an air duct adapter for the Inventum AC701 portable air conditioner. It allows you to add a secondary intake hose to the rear intake side of the unit. Single-hose…
Secondary mirror spider holder for my Celestron FirstScope 114EQ telescope
This adapter allows an Ethernet port to be mounted in the Flex IO slot originally used for an extra display output. This was designed for a ProDesk/EliteDesk G4, but it may fit other generations of HP mini PCs. The adapter is designed for…
A carbon filter that attaches to the back back of a Bambu Labs X1C and P1S over the exhaust fan. Requires: 4X M3 Countersunk Bolts ( 6mm, preferred but up to 20mm should work). 4X M3 Heat set Threaded inserts ( 5mm long and about 5mm…
Are you annoyed when you switch eyepieces to take a closer look and have to adjust the Focuser every time, and sometimes lose your target? Try the Turret: set the focus for each eyepiece once and leave it be! Much easier, and more time to…
Werkzeug für die zweite Stufe von APEKS-Atemreglern zum Einstellen des Hebels. Ich habe zwar ein Servicetool, welches als Zwischenstück zwischen MD-Schlauch und zweite Stufe eingesetzt wird, wollte aber ein einfaches, leichtes Tool für…
I, personally, use the first layer calibration a lot, and I am guessing most of you do as well. However, I also wanted something that could calibrate the 2nd layer as well. So, I remixed Herbert's “bed level correction for Prusa mini”, so…
He's a little guy. Print him with supports and enjoy!
![Elder Scrolls: Betrayal of the Second Era + Valenwood Insert [BOTSE]](https://media.printables.com/media/prints/ed39d689-aa74-45c4-a73b-b7868a6e8d2b/images/9344262_8cdb6e5c-a286-496d-9d72-5825fda4b6a5_6aeab8d4-e50f-4fe0-a339-ffeb344c9761/cover.jpg)
