Wyniki wyszukiwania: sharps

Sortowanie

121 modeli

P
PrintablesPeter Farell

Stormtrooper Sharpshooter of the First Order.

Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023

Pobrania
2033
Polubienia
619
Ocena
5
P
PrintablesWizavich

Insulin Needle Sharps Dispenser

I wanted a dispenser for my insulin needles that could hold a lot of them. The 110mm tall one should hold an entire box of 100 comfortably but there are smaller versions included if you prefer. The inside has a small slope to help them…

Pobrania
821
Polubienia
146
Ocena
5
P
PrintablesNoktious

Safety Razor Blades Sharps Disposal Box

Tossing used blades in the trash is really bad. Tossing them in this box, and then in the trash is much less bad. NOTE: The razor blade silhouette on top is a separate solid body within the mesh of the box, you can select it in the…

Pobrania
746
Polubienia
63
Ocena
4,71
P

Sharps Disposal Can for Utility and Hobby (X-Acto) Blades

This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…

Pobrania
701
Polubienia
123
Ocena
4,94

Sharps Container

When my pharmacy started giving out cardboard sharps disposal containers (which they then refused to accept once they were full), I decided to put together my own sharps containers. I've included two versions on four plates - a square…

Pobrania
390
Polubienia
15
Ocena
5
P
Printableszeroflow

Razor Blade (Sharps) Container

One-Way container for used razor blades Print instructions Print with the opening down. https://a360.co/3diroqg

Pobrania
371
Polubienia
40
Ocena
4,8
P
PrintablesMrGreaterThan

Blade Bin - Utility Knife Sharps Container

This container is for safely disposing of your utility knife blades. Drop them in through the slot on the top and throw the whole bin away when full. The internal geometry prevents the blades from falling out. Update - 11/18/2025:…

Pobrania
268
Polubienia
24
Ocena
5
P
PrintablesThump2010

Diabetic Pen Needle Sharps Container

I wanted something on my desk that was not huge, bright red and with bio hazard signs on it for my diabetic pen needles so I came up with this. It has a needle bender for both ends of the needle cap, one is just a hole, lay the needle at…

Pobrania
254
Polubienia
33
Ocena
5
P
PrintablesT-MAN

Diabetic sharps container

I designed this simple sharps container to be printed without supports quickly and I wanted a compact form factor. I also wanted to make sure people knew there were sharps in there so I put a biohazard ☣️ symbol and a “WARNING SHARPS” on…

Pobrania
249
Polubienia
38
Ocena
5

Sharps Container

The sharps container will accept blades up to 25mm in width. The outer dimensions are 40x30x68.4mm . The model comes in two parts, the main body with debossed text and the text object. If you want the single color container, print just…

Pobrania
195
Polubienia
10
Ocena
5
P
Printablesjaztermareal

Sharpshooter mode and mid transformation versions Star Wars DC15 A rifle with enhanced detail for 1:12 , 1:6 and 1:1 figures and cosplay

UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. Two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…

Pobrania
188
Polubienia
44
Ocena
0
P
PrintablesMartin Lyne

Travel Sharps Container - Prefilled Injector pen

I've been looking for a travel sharps container for prefilled injector pens for a while now but the only ones that would take a full sized pen are 0.5l bins and far to big for air travel. The model consists of two parts and screws…

Pobrania
165
Polubienia
27
Ocena
5
P
PrintablesConnorBGenc

Vase Mode Sharps Disposal for Box Cutter and Razor Blades (Gridfinity Compatible)

Throwing out box cutter blades or razor blades? Don't just throw them in your trash or leave them laying around, or you risk accidentally cutting yourself! Print this quick sharps disposal container instead. This is a vase mode print, it…

Pobrania
161
Polubienia
21
Ocena
5
P
PrintablesSnobbyComa8

Sharps Container (MMU)

Simple case for sharps disposal. Lid requires a multi-material printer for the label. Glue the lid on after printing.

Pobrania
155
Polubienia
32
Ocena
5
P
PrintablesErik van de Pol

[ALCH] sharps / blade disposal box (ModuBox)

Don't throw hobby knife blades in the trash! This is a 1x1-grid, sealed blade disposal storage box, compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular…

Pobrania
147
Polubienia
24
Ocena
5
P
PrintablesRobMcFarlane

Simple Sealed Sharps Bin

Designed as a quick single piece print to give a safe way to dispose of old blades. Printing Notes ----------------- To get the best result, print the model upside down (slot against build plate) to prevent drooping when bridging the gap.

Pobrania
132
Polubienia
4
Ocena
5

Pegboard Razor Blade / Sharps Disposal Bin

I got sick of the old bottle I was using to dispose of razor blades taking up room on my bench, so I designed this to mount on a pegboard. Its sized for 1/4" holes at 1" spacing. Print Settings Notes: Optimized for the following print…

Pobrania
115
Polubienia
30
Ocena
4,67
P
PrintablesSlow3D

Sharps Container - Large

Container for safe sharps disposal like needles and cannulas. Two lid types allows for day-to-day use and disposal. The solid lid is used to close the container prior to container disposal. The other lid has restricted portals for needle…

Pobrania
111
Polubienia
7
Ocena
4
P
Printablestooclewell

Razor Blade Sharps Container (Vase Mode)

Vase Mode print for a razor blade container. Seems like blades can still fall out if you hold it upside down, so I'd recommend taping over the opening before disposing! I printed at 0.3mm layer height with an extrusion width of 0.8mm…

Pobrania
109
Polubienia
10
Ocena
5
P
PrintablesCrossCartridge

Sharps Rifle box patterns and jigs

measure your cartridges to make sure they will fit. Print the pattern and make a test box. The folding block is used when taping the corners. Some of the scoring jigs are imported together into the slicer, use left mouse button on the…

Pobrania
107
Polubienia
14
Ocena
0
P
PrintablesSlow3D

Small Sharps Container

This container was designed for safe sharps disposal like medical needles and cannulas. It is based on the Australian Standards for Sharps Injury Protection (AS 23907:2023) The key requirements, from the standard, that were incorporated…

Pobrania
95
Polubienia
3
Ocena
0
P
Printablesbiketiger

SHARPS DISPOSAL CONTAINER

Disposal container designed for Xacto blades Small size for desk drawer convenience. No supports necessary

Pobrania
95
Polubienia
13
Ocena
5
P
PrintablesEd Ivory

Sharps Container Magnetic

A used sharps container for the workshop. There are recesses in the back for removable magnets. Quick and dirty design. Make it better if you like. ***Not parametric*** But the fusion design files are here so you can play with it, just…

Pobrania
94
Polubienia
11
Ocena
0
P
PrintablesMatt

Scalpel and Blade Sharps Disposal Container

I made this for collecting my used scalpel blades. Affix lid with CA glue for a permanently enclosed container. This model has not been designed for clinical waste containment or disposal. Please check your local laws/regulations for…

Pobrania
94
Polubienia
12
Ocena
0
P
Printablessmdollins

HSW Sharps Container

Print Instructions : Print upside-down (slit against the print bed) 2 walls no supports

Pobrania
86
Polubienia
13
Ocena
5
P
PrintablesRevlos

Sharps Container

First thank you for an awesome model!I modified it slightly to be a desktop sharps container. I was recently diagnosed type 2 and needed something to store my sharps in. I figured I would 3D print a smaller container that fits nicely on…

Pobrania
85
Polubienia
6
Ocena
5
P
Printablesddl.vnt

ddl sharps razor blade box container

simple box container to store used DE safety razor blades be careful when trowing them in the bin, might be very dangerous for you and other operators print as in the model, i'd recommend not to use layer height greater than 0,2mm pretty…

Pobrania
84
Polubienia
10
Ocena
5
P
PrintablesAsa

Sharps Container - no supports needed

Stay safe and dispose of those sharps properly! If you don't know how to do a color change in Prusa slicer see this video for a tutorial (no MMU nor AMS needed):

Pobrania
83
Polubienia
24
Ocena
5
P
PrintablesFutrell Garage

Sharps container for needles

Simple container for my used syringes. The lid and container fit on the Creality K1 build plate.

Pobrania
82
Polubienia
8
Ocena
0
P
Printablestooclewell

Rotating Sharps Container

Printed on bambulab p1s with 0.16 layer height. Rotating section has a 0.2 mm clearance. OnShape Files:…

Pobrania
82
Polubienia
8
Ocena
5
P
PrintablesMichaelKroes

Sharps container with Tickle Flex

This sharps container for diabetes needles contains a holder for a Tickle Flex and new needles. The hazardous waste logo is printed with a color change mid layer by setting the number of extruders to 2 and setting the extruder change…

Pobrania
80
Polubienia
10
Ocena
5
P
PrintablesClaire321H

Utility Blade Sharps Box

Box to deposit spent trapezoidal utility knife blades. Keeps blades secure with tapered interior opening to prevent blades from falling from box if overturned. Do not overfill box. When depositing a blade becomes difficult, dispose of the…

Pobrania
73
Polubienia
8
Ocena
5
P
PrintablesAstrobirder

Clorox Bottle Funnel for Sharps disposal

This funnel fits a US Clorox Bleach bottle to make it easier to use as a sharps disposal. Can be used for hobby blades (x-acto and similar), razor blades or diabetes sharps like pen needles. There is a thin wall that fits inside the lip…

Pobrania
71
Polubienia
23
Ocena
0
P
Printablessui77

Sharps Container

This sharps container provides a secure solution for the disposal of needles.

Pobrania
69
Polubienia
11
Ocena
0
P
PrintablesDakumori

Sharps Disposal Container

A simple sharps disposal containers with biohazard warning labels and a screw on top for safety. Prevents needle sticks for trash disposal workers. I recommend printing in a non-brittle filament to protect against drops. Ideally ABS or…

Pobrania
68
Polubienia
14
Ocena
0
P
PrintablesStefan Kellner

Dew Shield for Sharpstar 15028 HNT Telescope

Simple dew shield. I covered the inside with velours.

Pobrania
63
Polubienia
4
Ocena
0
P
PrintablesAnosognosia

2L Pop Bottle Sharps Lid

I found similar adapters online, but they didn't fit my pooch's larger insulin needles. This screws into the top of a 2L PET bottle, and can be sealed with the original lid during use or when full. the slide could be finessed to reduce…

Pobrania
62
Polubienia
11
Ocena
0
P
PrintablesNick

Sharps disposal container big enough for Olfa blades

Glue the top to the base, and then slowly fill it up with your used blades over time. In 30 years when the container is full, throw the whole thing away and make a new one. Don't be that guy or girl who throws razor blades into the trash.…

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesMatt Gard

Drop Target for a Game Plan "Sharpshooter"

This is a recreation of a hard to find pinball machine part. Thanks to njPinWiz for supplying a part to take measurements from. Measurements were rounded to the nearest mm. I did not "hollow out" the back of the part. The walls of the…

Pobrania
61
Polubienia
0
Ocena
0
P
PrintablesAaron L

Sharps container

This container is meant to be a safe way to dispose of double-sided razor blades. The blades easily slide in from the top and won't come out again. I only tried printing this on a Prusa MK3S and I suspect it'll be fine for any other…

Pobrania
61
Polubienia
5
Ocena
5
P
PrintablesJay Dubya

Sharps Keeper

I'm diabetic so I have to prick my finger, twice a day, with a sharp lancet to measure my blood glucose level. The used lancets need to be stored until they can be safely disposed of. I wanted a container that was easy to put them into,…

Pobrania
59
Polubienia
11
Ocena
5
P
PrintablesTuna

Sharps Box

For utility knife blades.

Pobrania
58
Polubienia
4
Ocena
0
P
PrintablesTJJohn12

2nd Mass. Sharpshooters Monument - Gettysburg, Pennsylvania

Two companies of Massachusetts sharpshooters, a rarity in the American Civil War, fought as independent units attached to other commands. The 2nd Company of (Governor) Andrews sharpshooters was attached to the 22nd Massachusetts Infantry…

Pobrania
57
Polubienia
9
Ocena
0
P
Printablessquidmouse

Sharps Container with Drop Slot

Recently got diagnosed with type 2 diabetes. Started using a glucose monitor and realized I needed a place to put my used lancets and test strips. So I designed this simple two piece container that I can easily deposit and dispose of…

Pobrania
54
Polubienia
10
Ocena
5
P
PrintablesDiscotehk

.50-90 Sharps Cartridge Model

This is for a breach block shot counter for the Deadlands TTRPG. It's a 1 shot rifle so you really only need one round but you could always use them to fill out a Quigley Down Under cosplay, other bandolier or ammo belt. Cat for scale No…

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesCyclone-6

Portable Sharps Needle Container

This is a portable, disposable Sharps needle container (for diabetic needles, etc) with one hand closure and snap lid. This model is NOT FDA-cleared and should be used only when FDA-cleared sharps containers are not available. The model…

Pobrania
52
Polubienia
7
Ocena
5
P
PrintablesWhat2Print

Needles/Sharps Box from Insulin Pen

A used needles box from insulin pens. I made this blue box and red lid for the sharps.

Pobrania
51
Polubienia
8
Ocena
5
P
Printablesmabster314

Sharps Container

This is a small container I created to hold razor blades. It's intended to be disposed of with the sharps inside of it, and is marked “SHARPS” on the side. Print it with the slot facing the print bed. I used 15% lightning infill.

Pobrania
49
Polubienia
2
Ocena
5
P
PrintablesGuym

Solar filter for SharpStar 61EDPH V3

3D Printable Solar Filter – SharpStar 61EDPH V3 Description This is a front‑mounted solar filter holder designed specifically for the SharpStar 61EDPH V3 apochromatic refractor (61 mm aperture). The model is intended to securely hold…

Pobrania
48
Polubienia
3
Ocena
0
P
PrintablesCamPaine

Sharps Bin for HSW

This is a sharps bin for Honeycomb Storage Wall. Once the bin is full throw it in the bin and print a new one. Designed so that once blades have gone in they cant come back out. I have Tested for 10A blades and Stanley blades If you wish…

Pobrania
48
Polubienia
14
Ocena
0

Simple Sharps Container / Box ( sealed )

Small sharps container designed to be printed in one piece for personal use. It has 1.35mm walls all around ( ~ 3 perimeters ). As shown in galaxy black PLA. No supports needed. Use your best judgement when handling sharp objects. I do…

Pobrania
48
Polubienia
5
Ocena
5
P
Printableswesleyac

DE Safety Razor Blade Sharps Bin - Print In Place (by alasdairedward)

This is a reupload of DE Safety Razor Blade Sharps Bin - Print In Place by alasdairedward on Thingiverse! This is a print-in-place sharps bin for DE razor blades. It should hold at least 60 blades and is completely sealed so it can be…

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesJon@Studio17o7

Mounting Bracket for 5 Quart Sharps Container

Wanted a simple mounting bracket for an Oakridge 5 QT Sharps container I have been using for home sharps disposal. All of the brackets I could find were either way more complex or way more expensive than I needed. (All designed for…

Pobrania
43
Polubienia
5
Ocena
0
P
Printablesmatt

Sharps container

Just a small Sharps container, Couldn't find one I liked so I made it. 0.20 standard X1C, with 5% infill for me. Its my first model I have uploaded so please be kind to me lol. There is an open top one with lid and a compeltly closed one…

Pobrania
42
Polubienia
6
Ocena
0
P
PrintablesFoden

Disposable, or emptyable, sharps container

I really liked the original container but it was just a little too narro for the blades I use to lay flat. So I up'd the scale to 108.7%, exported the lid and edited that in F360 - added a ‘shute’ to make it harder for the blades to fall…

Pobrania
41
Polubienia
9
Ocena
0
P
Printableswhy not

Portable Sharps Disposal Container

This is a portable sharps disposal container. It is designed for portable and compact laboratories and also to be hung from a backpack for easy use. this is a good print for taking studies into the field were you have to carry your…

Pobrania
37
Polubienia
12
Ocena
0
P
PrintablesFelixAtter

Sharps Bins for small blades

print flat, model has internal arches to support roof so no additional supports needed. Smaller 30mmX80mm box works for most small blades as shown in pic. Longer 100mm version was created for a friend that does taxidermy and needed it for…

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesBlargruck

Razor Sharps Container

This is a small razor sharps container for safe disposal of double sided razorblades.

Pobrania
35
Polubienia
1
Ocena
0
P
Printablessmdollins

Sharps Disposal Container

Printed in PLA. No supports needed

Pobrania
35
Polubienia
4
Ocena
5
P
PrintablesRyxxi_makes

Division 2 Sharpshooter class Cherry MX Keycap

Division 2 Sharpshooter class Cherry MX Keycap uploaded a new repaired model that fits the key better Category: Video Games

Pobrania
34
Polubienia
8
Ocena
0
P
Printablese.nygren

Sharps Lid for protein powder container

Biohazard sharps container lid for protein powder container. The containers seem to come in multiple sizes — this one is for the one with the lid with an outer diameter of 139mm. It should be possible to adapt to the smaller size and I…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesWrightBuilt.ca

Sharps Disposal Bin

Designed to replace my full sharps container. Mostly used for broken utility/hobby blades. Objects inserted into the container remain inside well when inverted and shaken (I couldn't get any out and gave up after a few minutes). To find…

Pobrania
30
Polubienia
2
Ocena
0
P
Printableswarms

Large Sharps Container

seal with gorilla tape and dispose of your sharps properly. opening in the model is slightly wider than in the photo shown, to accommodate slightly larger 3ml syringes.

Pobrania
29
Polubienia
0
Ocena
0
P
PrintablesDiscotehk

50 Sharps mock breach block - single shot Deadlands shot counter

A single shot shot counter for the Deadlands TTRPG. Use it to keep track of whether you have a round loaded or not. Remove the mock round when you take a shot, load another when you successfully pass your reload. Gives you the feel of…

Pobrania
29
Polubienia
1
Ocena
0
P
Printablesericjray

Metro Shelving Clip-on Sharps Holder

I discovered the very well-made “CUP” holder from NotLikeALeafOnTheWind , and used that as the basis for a holder for a sharps container for my esthetician wife to use in her shop. Printing is straightforward with no supports needed.

Pobrania
27
Polubienia
7
Ocena
5
P
Printablesmethlon

Gridfinity AmongUS sharps box

a Gridfinity AmongUS themed sharps box, just fill with blades (from behind) and Vent um I mean throw away included 2 versions with recycle tags (PLA and PETG) should print without supports enjoy

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesHawkeye

0.8 MOD gear 80T (for Sharpstar Askar FMA180 telescope) & 0.8 MOD gear 40T (for ZWO EAF motor)

This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesTurnipToss

DE razor blade sharps bin

Made a small simple box to hold used sharps. Holds half size DE blades as that is what I use. Tape or glue the bottom to the top. STEP and Solidworks files are included for modifications. Print Settings Printer Brand: Prusa Printer: I3…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesGeorge

Sharps / Razor Disposal

I needed a better way to discard used utility razor knives. i was previously wrapping in electrical tape, but that was never a guarrentee for safety. This was a simple solution and portable / stowable option for those interested. The top…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesHawkeye

0.8 MOD gear 114T (for Sharpstar Askar SQA55 telescope) & 0.8 MOD gear 57T (for ZWO EAF motor)

This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…

Pobrania
21
Polubienia
2
Ocena
0

Safety Snapper and Sharps Collector for Retractable Utility Knives

I created this for use at work to provide a safer way to snap off Olfa blades and collect the sharps for disposal at the same time. There are two for the most common blade sizes: 18mm 25mm

Pobrania
21
Polubienia
7
Ocena
0
P
PrintablesGenericLifeform

Break-away Segment Knife Sharps Holder

Container to safely break and store the shards of a break away knife. Easy to print and just throw away the whole container once full to safely dispose of the shards.

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesmeub

1993 Nerf Sharpshooter Conversion for Elite Darts

This is a drop in replacement for the stock plunger on the 1993 Sharpshooter for one that supports a 17/32 brass barrel for use with Elite darts. It can easily be swapped in for the stock plunger without any permanent modifications to the…

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesKosmos Design

Sharps Box

This is a sharps box that I designed! It requires zero supports and should work with any print settings. Do keep in mind the warping of the corners, potentially better with a raft. FIX FOR WARPING To print without a raft: In PrusaSlicer,…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesFuNIILab

Reusable Sharps Bin

A reusable sharps bin for disposing glass/quartz micro and nanopipettes, commonly used in chemistry/biology laboratories. Although disposable sharps bin are preferred (and maybe mandatory in some places), access to these are not a reality…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesQueued

Diabetic sharps container, 2-color remix

A container for sharps, as per the original, remixed for multicolor printers

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesIvy Nightwind

Sharps container wall mount for 2 gallon

Couldn't find a model anywhere for the 2 Gallon sharps containers I use in my tattoo studio to mount them to the wall. Saw this model by zoejanexy on Thingiverse however it was not the right size and shape for my standard containers.…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesEliTheAsianGuy

Insulin Pen Tip Sharps Container

Originally this was designed to fit the Unifine Pentips, which I am using this for. It will fit pen tips no larger than 18mm in diameter. The container features an angled opening, which I thought would help prevent needles from falling…

Pobrania
17
Polubienia
3
Ocena
0
P
Printablescsh

Sharps disposal for X-acto blades -- Spiral Vase

I like to change out my knife blades early and often, but they are awkward to throw away. This simple sharps disposal container fits about eight standard #11 hobby knife blades. They blades will just fit in the slot, and won't come back…

Pobrania
17
Polubienia
7
Ocena
0
P
PrintablesRadek Průcha

Key top protection - Sharps gauge bonding

PETG or PLA, perimeters 3, infill 20%. Print on the side

Pobrania
16
Polubienia
1
Ocena
0
P
Printablessolids modeler

Sharps Portalab

A Sharps disposal kit with the capacity to attach lab collection or analysis accessories to allow for quick field setup of basic collection, sampling, and/or testing of clinical, chemical or biological requirements. Sharps container has a…

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesCreatedByLayers

Sharps Disposal Warning Sign

This is a fun way to direct people where sharp items/objects can be disposed of. you will need to do color changes or use an mmu or ams to color the item in.

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesgholland

Dwarf Sharpshooters

This is all the files from PhysUdo combined to print as one! Print Settings Printer Brand: Up! Printer: Up Plus2 Rafts: Yes Supports: No Category: Toys & Games

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesFoden

Sharps container - modified lid

Added lip to stop blades coming out

Pobrania
13
Polubienia
5
Ocena
0

Sharps container for razors and stuff

Print with the opening towards the bottom. Two version one with fully flat base for easier printing, one with a razor silhouette on it.

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesJenno

Replacement Lid Converting a Lysol Bottle to a Sharps Receptacle

For personal home use only - not medically approved A replacement lid for an empty Lysol container (95 wipes size) that can be utilized for hypodermic syringes / needles collection before disposal. The outer seal rotates from its closed…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesRoman Hujer

EAF holder TS 76EDPH (Sharpstar)

Focuser holder for TS Optics 76EDPH (Sharpstar) APO triplet Support for: ZWO EAF OnStep Nema17 Focuser My Astro focuser BOM 1x GT2 Timing pulley 40Teeth/Bore 6mm 1x GT2 Timing pulley 20Teeth/Bore 5mm 1x GT2-142mm Timing Belt size 6mm 3x…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesMaker Wulf

Utility Blade (Sharps) Container

This model scales up the original for use with utility blades. Adds a sliding dovetail for the bottom so everything can be printed easily without supports. Use a dab or two of CA glue to affix the bottom in place. Recommended print…

Pobrania
11
Polubienia
6
Ocena
0
P
PrintablesKubamelon

Sharps Disposal Box for Safety Razors

Sealed box for disposal of shaving blades / other sharps

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesSysErr

Sharps dispenser

Use for storing/dispensing my sharps for my diabetic insulin pens

Pobrania
10
Polubienia
3
Ocena
0
P
PrintablesJosh

Sharps Box

Sharps container to hold used razors and scrapers for later disposal. Print with the opening on the build plate to ensure the tapered face prints easily without any supports

Pobrania
9
Polubienia
1
Ocena
0
P
Printablespeepsnet

Half Razor Blade Sharps Bin

I wanted something to to store my used razor blades in. This uses very little filiment and is disposable. The blades are inserted through the bottom and won't fall out. I also designed a view port to see how full it is. The lid snaps on…

Pobrania
9
Polubienia
0
Ocena
0
P
Printablesc8_h10_n4_o2

Gridfinity 2x1 sharps container

A gridfinity bin to discard used blades in. This can be printed with zero top layers and zero infill to save a bit of filament in the bottom.

Pobrania
8
Polubienia
2
Ocena
0
P
Printableswinchcable22

Sharpshooter Gun Shooting Rest PAD

Sand bag pad replacment for the (Winchester / Allen Company) Sharpshooter Gun Shooting Rest. Fols and pops in easily. Best prtinted in TPU 95A. Printing on side of bottom work. side is more durable but longer print time and sligth more…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesWhat2Print

Insulin Pen Sharps Container

Insulin Pen Sharps Container that is not to big but holds at least a few weeks of sharps. Can be printed with a single layer change at layer 120 on the lid to color the text. Use supports to get the text color different on the lid. The…

Pobrania
6
Polubienia
3
Ocena
0
P
PrintablesNightStorm

Sharpstar 13028HNT-AL Dew Sheild

This is a fully parameterized dew shield I created in FreeCAD for my Sharpstar 13028HNT-AL Newtonian Astograph. . It prints in two pieces, a collar that fits around the OTA a mating the tube body. One can optionally put a piece of foam…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesMason Fizer

Small Sharps Container (Various)

Small square sharps containers. Project file has three different prints for 3 different sharps blades. The largest is the double-sided razor container, while the other two are for #2 and #11 X-acto blades. The slots are sized specifically…

Pobrania
4
Polubienia
0
Ocena
0

Safe Disposal Box for Used Blades / Sharps

Both original models are fantastic!

Pobrania
4
Polubienia
1
Ocena
0

Sharps Bin Wall Mount

Wall mount hook to hold the sharps bin out of reach of children and pets by fastening to the wall.

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesDocWeebl

Gridfinity Blade Bin / Sharps Bin

A sealed box to keep used blades safe. once it's full, throw the whole box away and print another. Gridfinity compatible - sized 1L x 2W x 6H. Includes slots for magnets, but it seems like a waste to fit them to a disposable item. Can…

Pobrania
2
Polubienia
0
Ocena
0