1041 modeli
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
4xM3 nuts and 4xM3x6mm bolts (best cap head socket screws) needed for assembly. After few test I found extenders wobbly, maybe trying print it with PLA will solve the problem. I'm still working on better version with supports to make it…
After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…
Subaru transmission seal driver for shifter linkage fit 2002 to 2007 6speed transmission. Should fit other years but can't confirm. Can't confirm for 5speed either. Let me know !! Confirm for oil seal part number: 806716070 Make sure to…
I bought a Shimano Deore shifter (SL-M591) with an indicator display which I don't want. I still need something to prevent dirt & water ingress, so I made this. I removed the display, & while it has the tabs for holding the spare cover,…
After a fall on my MTB I destroyed an internal part of my Sram X9 rear shifter. For fun, I decided to design a 3D printable version of the part and see if I could repair de mechanism. After a few iterations I had a working design that, to…
4b0 863 279 c wjd 80881
RALLY-STYLE SHIFTER FOR THE THRUSTMASTER TH8S Easy to Print Uses under 70g Of Filament Tested on the Thrustmaster TH8S Designed Without the help of AI Multicolor Printer Not Required Print settings are already Included in the .3MF Make…
LEATHER STITCHED SPORTS SHIFTER FOR THE THRUSTMASTER TH8S Easy to Print Almost No Supports Uses under 200g Of Filament Tested on the Thrustmaster TH8S Designed Without the help of AI Multicolor Printer Required Download the Bambu studio…
JDM SHIFTER FOR THRUSTMASTER TH8S Easy to Print Uses under 80g Of Filament Tested on the Thrustmaster TH8S Designed Without the help of AI Multicolor Printer Not Required Print settings are already Included in the .3MF, Make sure to Print…
The revisiting of an old project of mine, which I had published here on Thingiverse with my old profile Ive printed using a Bambulab X1C and printed with Sunlu Matte PLA.
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Are you stuck idling when you'd rather be driving? This pocket-sized six-speed gear box fidget may help. Feel free to make vroom-vroom noises as you lace through the gears. The gear graphic on the back identifies you as a proper gearhead.…
Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…
DIY Racing Sim Sequential Shifter Thanks for your interest in my DIY 3D printable Racing Sim sequential shifter. The idea was to design it to be strong & long lasting, but also cost effective and without any special components required.…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
I really liked jeoje's design for the Playseat Challenge, but I didn't have any M3 hardware that was long enough. I had some M6x40mm flat head screws leftover from another project, so I decided to use those instead. I started from scratch…
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part. Background I took the basic design from my M12x1.75mm shift knob and adapted…
Print what you want. No need for supports.
Hello, Today I have a 5-speed training gearshift for you. It is great for practicing manual gearshifting in a car. It prints several parts, there are also files for multi-color printing. For proper functionality, you need to use a Print…
I printed a skull found on thingiverse (https://www.thingiverse.com/thing:518109/files), and we got the idea to use it as a gear shifter knob for my car, as I had already woodturned a shifter a while back. The skull is scaled to 40% of…
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -Designed for 3d printing -Magnetic Snap action lever -M4 x 8mm spaced…
DIY Paddle Shifter PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Features Large 15x5mm magnets Ball bearing movement Compact design Easy FDM printing A simple…
This is a figit shifter which clicks when put in gear. Does not take muck material so it could be printed from end of the roll scraps. Happy printing and enjoy!!
This model is inspired by this adapter: https://cults3d.com/en/3d-model/game/adaptador-secuencial-logitech-g29-g27-sequential-adapter-logitech-g29-g27. The model is good but I wanted it to be more tight fitting and to be able to use…
Inspired by the drippy bucket I wanted to challenge myself to designing a dripping ice cream cone. From this I wondered how it could be used practically and thus spawned the drippy shifter. This design is made up of multiple parts with…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
Used the merged top and added hooks for rubber bands in order to have the option to convert it to sequential.
Tool to adjust gear lever of a VW Golf 2 Category: Automotive
This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the TH8A mount from floano: https://www.thingiverse.com/thing:3325124 Customized to hold the SHH Shifter and/or a handbrake…
I created this simple object to convert the Logitech G29 and G27 into a Rally Shifter. I wasn't happy of the actual design so I created mine. Caution: Only works with the original lether cover or you have to glue it ;) You just have to be…
Logitech Driving force H shifter Console to mount to Playseat Challenge. Ends up being a quite nice starting setup for a driving simulator rig. Use PETG with 35% Gyroid infill, and 2pcs M4x30 Screws with washers to mount. 2019.02.20: REV3…
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
Shifter gates: This keeps the same gate geometry and switch mounting as the original gates, but upgrades the thickness of the gate panel to feel more sturdy. The original shifter gates that came with the shifter were thin plastic. Shift…
I printed “Status_Symbol_3d - Gearshift keychain”. Although it was a nice fidget, I wasn't satisfied with the action. So I decided to make my own version of a gear shifter fidget. I made it so there's a spring to return the shifter to the…
Pre-threaded (M12x1.5) shift knob with a VW pattern.
!!!UPDATE !!! Use the NEW STL's for the Shifter Base and Shifter Lever instead of the .step models 8x5mm magnets microswitches For a single Shifter: 4x M2x10, 2x M2 Nut 1x M3x30, 1x M3 Nut 2x M4xXX, 2x M4 Nut ----- mounting bolts, length…
This is an OEM looking BMW E30 shifter/gear knob that fits into your E30 with ease. It has a peg in the middle so it doesn't rotate and a recess for the original BMW gear knob emblem, which is this part number 25111221611. I got this…
A mighty owl-man adventurer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate…
H shifter with Magnets and Sequential hooks
An extension to the original Logitech shifter knob. It is about 100mm (10cm) tall. Outer diameter is 35mm. To install it you need to remove the original top by removing the decal on top of the knob and removing the M4 screw. Put in the…
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…
>>>Newer Altered Version Available<<< I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days. I modified the slider for increased durability and smoother movement, and I remixed the top plate for added…
I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…
Clip used to attach the brake and shifter cables together for neatness. Very tight fit.
I really liked Forker45's shift knob and the fact that H3wro's uses the original logitech shift knob cap, so I combined them together to make this! The picture of my print in black were H3wro's original model (I also uploaded his file)…
These dummy shifters are modeled after the shimano grx shifters. They are basically fake hoods and thus the only benefit is to give you the same comfort as regular dropbar shifters. Main purpose is the fixie and indoor trainer bikes with…
Wanted a ball shifter knob but due to the assembly and design of the original I had to add a threaded end to add the knob after the lever is inserted into the H pattern gate. Threads are a standard M6 and the threads in the ball were…
I didn't like the original screw, so I made my own version with better grip. 55mm thread version should be enough for 20mm desk but i also made 75mm version. I recommend using adaptive layer height for better thread quality and at least 3…
The ClickShift is an experimental new fidget design, combining a ball-joint joystick and ball detent mechanism to make a joystick that snaps into multiple positions. The result is a “clicky” joystick that produces a fun tactile (and…
Snap on extensions for using larger wheels.
M18 adapter to mount a shift knob in a Logitech G29 shifter
I've designed the button Box to work with 300mm to 320mm steering wheels. The button box contains 8 push buttons and 2 magnetic paddle shifters and interfaces with a PC via an Arduino Pro Micro. Assembly Print out the parts. Choose which…
Manual H Shifter e caixa de engrenagens USB sequencial com Arduino e duas opções de montagem. Além do vídeo, disponibilizei os arquivos para quem quiser fazer também. Dica extra no vídeo sobre como atribuir um nome personalizado ao…
The Final Shifter Mod… Modular sequential shifter mod for Logitech G Shifter (G29 G920 G923) and H-Pattern stiffness improvement. Only 4 M3 x 16 screws + Nuts needed. I moved the slider on top of the shifter mod to make it more versatile…
Try out my latest design found on cults: https://cults3d.com/en/3d-model/game/magnetic-fidget-shifter-v2 use code “FOUNDONPRINTABLES” for 50% off at checkout. Introducing MK2 of my magnetic fidget line. This model shows major improvements…
Changelog: 12/02/2025 Added a 6+R version. Look for the “_6R” files. I checked everything in cad and it should work just fine but I did not personally test print (tested by c4tkybnm, check the makes). It may look a bit weird because I…
This universal mount is designed for the Playseat Challenge. The mount was originally designed for the shifter plate from Advanced Sim Racing. But it can be used for any custom design. The spacing between the mounting holes is 85.2mm.…
No support needed, I printed it in PLA with .2mm layer height with a .4 nozzle
This custom long-throw shift knob for a Logitech G-Shifter is a press-fit (no hardware needed) replacement for the ball style shifter it comes with. I printed mine using an Ender 3 Pro, using a 0.2mm layer height, and 3 perimeter shells…
Shifter Knob Sparco Style for logitech shifter
Print with lots of walls at high quality
Logitech Paddle Shifter Adjustable Extenders These clip-on paddle shifter extenders offset the stock paddle shifter to better fit aftermarket wheel adaptations. These are designed to fit perfectly with my other hot swap wheel connector…
On my Mercedes 300CE W124 was rubber boot on manual shifter. There are many aftermarket leather boots for few bucks. The issue is that original frame fastening boot does not worked for me. So I created new, more sturdy. There are two…
it is for a can am atv, it is better than the stock shift knob
For the shifter, I used ABS material. After printing, I sanded it with 180/320/500/800 grit papers and polished it for a better finish. If you use 100% infill, the knob will feel more solid and, in my opinion, it will be better to use. I…
Shift Knob Threaded Adapter for Logitech Shifters Ever wanted to put an actual shift knob on in place of the Logitech foe leather knob? Do it! Install ; Remove logitech foe leather shift ball by popping off center cap. Unscrew standard…
Custom Mountain Bike Grips, Chain Guide & Shifters Several 3D printable components that were re-designed for a mountain bike. Consists of a multitude of variations of Handle Grips, Chain Guides and Shifter Plates that may be useful to…
Mi è piaciuta l'idea geniale della guida originale e così ho modellato un altro progetto con il modello H che avevo su di essa.
3d printable files for a pair of magnetic Shifter for your simracing wheel. they have a satisfying feeling/click, and are made to work with most microswitches (designed for omron ss-5gl, but most microswitches are almost the same…
A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm
Try out my latest design found on cults: https://cults3d.com/en/3d-model/game/magnetic-fidget-shifter-v2 use code “FOUNDONPRINTABLES” for 50% off at checkout. Everything should print in under an hour. All prints should be oriented in…
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
These bushings have been designed to enhance the shifting feel of VW manual transmission vehicles, allowing for more precise and crispier feeling shifts. This is a remix of Alberhasky_Designs ( Volkswagen MK7 GTI Shifter Bushings ) I have…
replacement part for w638 vito need 1 oring to hold it in place
This is a small box to hold an ESP32-Wroom32 micro controller, a level shifter and a female power plug. It uses M2 screws. Can be printed without any supports. Used Parts: These are just examples, not recommendations. The parts are…
A sequential adapter to turn the inexpensive USB shifter (can be found for $50-100 on Aliexpress or Amazon). To install: Move shifter to left (inbetween 1st gear and 2nd gear) Place Sequential Adapter in shift gate, between 3rd gear and…
This accessory for the board game Heat: Pedal to the Metal by Days of Wonder helps keep track of where the gear shift pawn is for each player. It also looks cool on the table. You can print the top flat, and insert pauses at specific…
This is Magnetic Paddle Shifter MOD for Thrustmaster T300 RS. BoM: 1x 5mm or 8mm bracket 1x M3x10 1x M3 nut 4x 10x3 (or 8x 10x2) mm Neodymium magnets 1x 2-component adhesive (Epoxy) Video: https://www.youtube.com/watch?v=PORMB1qgojM Print…
Arduino based shifter/handbrake combo for PC. For this project i got inspiration from Amstudio's handbrake projects. https://amstudioprojects.com/handbrakes/ The Handbrake sketch for Arduino is from him. Arduino sketch for shifter come…
Shifter for Gaslands. Fast print (~1,5h), friction fit and no supports. Can be used as a fidget toy.
4x 8x5mm magnets (6x if you want a stronger click) 2x microswitches 8x M2x10, 4x M2 Nut 1x M3x50, 1x M3 Nut 2x M4xXX, 2x M4 Nut ----- mounting bolts, length depends on your wheel models
Needed a shift book bracket from my e28 and saw a couple of posts on eBay that were 3d printed and thought "wait I have a 3d printer, ill just design my own." So I took some measurements and pictures and came up with this design. Its far…
this is an h pattern shift guide for the logitech g923. there are also options for a short and tall shift knob. you will need 1/8" longer m3 screws. if you are having issues getting the screws to line up flip the shift guide around, it…
A simple shifter knob mod I made for my Logitech G920 shifter that came out nicely so I decided to share :) .Using original screw to mount .Printed with 4 walls for extra strength .Only needs supports for the hole I painted out the rest…
This is a Remix of the great model from andonius: https://www.thingiverse.com/thing:4800227 Starting with the grey Version I added a german joke to the stl with meshmixer which is in the style of the original Shimano Ultegra print. It…
Center Console Filler for Empty Shifter Space
FIts a 2015 Toyota Verso. Its about an 8mm diameter metal shaft with 20mm of threads at the top. Print Settings Printer: Trilab DeltiQ XL Rafts: No Supports: No Resolution: .4mm Infill: 30 Filament: Fillamentum Flexfill 98a Vertigo Grey…
Use this to mount my shifter on my sim racing rig (TR80 Lite in the photo) Should work on most sim rigs unless you're using a specific type of extrusion. Holes are for M6 bolts. I printed with extra walls for strength near mounting holes.
This model can be used as a spacer to increase tension in the spring holding the ball bearing thus improving the overall feel of the shifter. I created this as a replacement for the bolt mentioned by the gentleman in this YouTube video:…
Gear Shifter Fidget (6x3mm magnets) | REMIX (note: Modified to fit eight 6x3mm magnets instead of the original 5x3mm. And parts have to be glued together in the end.)
I printed the top and bottom parts in ABS. The spacer is optional, I printed it in TPU of a different color.
Fanatec shifter knob holder - on 8020 profil rig. Perfect for Sim-lab, Simxpro, TrakRacer rigs
screw m3x10 Zero Delay Arcade USB Encoder PC to Joystick button 12mm and 7mm or custom
