Wyniki wyszukiwania: shorter

Sortowanie

476 modeli

P
PrintablesFernando Pena

Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]

I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…

Pobrania
102
Polubienia
10
Ocena
0
P
PrintablesAndi

Prusa i3 MK2S shorter LCD support

Shorter LCD supports for the Prusa i3 MK2S to make it fit better into my lack enclosure. I found that even with the 45° heatbed cable support ( https://www.thingiverse.com/thing:2862941 ) the Prusa i3 MK2S is too big to fit inside the…

Pobrania
94
Polubienia
7
Ocena
5
P
PrintablesThe Mapster

Shorter version (2 inch vs 4 inch)

Cut down to 2 inch tall vs the 4 inch original.

Pobrania
81
Polubienia
9
Ocena
5
P
PrintablesPrince Plastic

[Updated] Wyze v3 Camera Bed Mount for Ender 3 Pro [shorter version]

Kind of a remix, kind of a whole reworking. This brings the camera in 15mm to increase stability, reduce carriage weight, and cut down print time. I printed mine upright with a brim, tree supports, and support blockers for the smaller…

Pobrania
69
Polubienia
12
Ocena
0
P
Printablesgrtych

V3 KE Right Removable Trash Bin - Shorter Length

Made the removable bin shorter in length to fit with the Nebula Pad being relocated.

Pobrania
39
Polubienia
9
Ocena
5
P
PrintablesBrian Bu

Shorter Snake

This is a shorter snake that of course prints quicker, but is also stronger since there is less smaller links. If you are looking for the shortest snake, it can be found here: https://www.printables.com/model/856137-shortest-snake-v12

Pobrania
15 988
Polubienia
1024
Ocena
4,96
P
PrintablesGürkan Altaş

Ender 3 V3 SE Lightweight Fan Shroud (Shorter)

I shortened the height so I could use the original air duct. You can stick to the print instructions in the original model I just changed the size. Due to the temperature, PLA is a problem as it gets closer to the plate. The original air…

Pobrania
1497
Polubienia
110
Ocena
4,89
P
PrintablesFisherman

Big Clamp for Small Arms - short version with shorter clamp screw - Multifunction Arm mounting system

For the small version of the excellent "multifunction arm mounting system" there is a remix for a more stable bracket that allows heavier objects attached to the arm. I wanted to attach this bracket to my IKEA "Kallax" shelves (~38mm).…

Pobrania
1150
Polubienia
130
Ocena
5
P
Printablesbagel

Ender 3 Pro shorter drawer (fits recently manufactured Ender 3 Pro machines that have less space under the bed)

Fits the newer Ender 3 Pro without needing to reverse bed bolts! The case is 52mm tall, so you can double check the bolt under your bed won't rub into the case. The 3rd photo shows which bolt to watch out for. This is a remix of…

Pobrania
1086
Polubienia
145
Ocena
4,86
P
PrintablesWDNick

Spray Can Handle with No Logo and a Shorter Trigger

This is a remix of Corefile's No Logo version , which is a remix of Joe's V4 version , which was a remix of FilamentCorner's version. My only complaint about the original versions of this handle was the length of the trigger. I like to…

Pobrania
1029
Polubienia
333
Ocena
5
P
PrintablesN8finch

Shorter Dryer Lint Vacuum Attachment

This is a shortened dryer lint vacuum attachment to clean out lint that gets past your dryer lint trap. I just did it on my Samsung dryer and got a little bit out that looked kind of old so I'm glad it's clean in there. I used my older…

Pobrania
841
Polubienia
448
Ocena
0
P
Printablesthejosh108

Makita router circle jig shorter

Shortened the design by cutting a chunk out of the middle of the track. Fits on more printers and prints faster this way

Pobrania
808
Polubienia
159
Ocena
4,82
P
PrintablesHenrik Sachse

Shorter Spool Holder for Anycubic Kobra 2 Pro

In order to save some space I reduced the original Anycubic Kobra 2 Pro spool holder to a width of 70mm. The original is 90mm. Compatible with my Anycubic Kobra 2 Pro Spool Mount: https://www.printables.com/model/855122 That combination…

Pobrania
730
Polubienia
65
Ocena
5
P
PrintablesAndreas Otto

Ender-3 V3 SE Ball Joint Filament Guide Shorter 1-piece print

Printed in PLA Plus, .2mm layer height and organic supports

Pobrania
686
Polubienia
59
Ocena
5
P
PrintablesCorr Pendragon

Shorter Rack Stud and Wrench (More forgiving for lower fidelity printers)

This is a basic edit on the original Rack Stud by Erik Jeppesen to make it shorter and slightly more forgiving for lower-accuracy and lower-fidelity printers.

Pobrania
611
Polubienia
60
Ocena
4,5
P
PrintablesHologos

Shorter Redux Bambu Lab Silica Gel Desiccant Tray - For New AMS v3

Remixed the base to fit with the original ams lid. It's 1.5 mm shorter than the original. Print settings They are the same as in the original model.

Pobrania
598
Polubienia
65
Ocena
5
P
PrintablesValerie Moore

SV08 Shorter under the drag chain connector

This is a Shorter under the drag chain connector for the SV08. Use supports. This uses the exact same 10x15mm Drag Chain that is provided by solvol. I get no kick back for this. https://a.co/d/bmJhGwp

Pobrania
591
Polubienia
74
Ocena
4,92
P
PrintablesChristian

shorter leg for Ikea Lack Table

we needed a space to park and hide our robot-vacuum so i printed these legs to use that cheap ikea lack we had on the picture is the 120mm version, but 100 and 150 are included in the files as well i printed that in petg with 5 walls and…

Pobrania
584
Polubienia
243
Ocena
5
P
Printables3DStubeMinden

Interview Handle for Rode Wireless Go (shorter version for Prusa Mini)

Microfon holder remixed for the “Rode Wireless Go (II)” : https://amzn.to/3HWJ8ot (Partnerlink) Original description: "This is my version of Rode's Interview Go Handheld Adapter for their Wireless Go systems. Plug the Wireless Go receiver…

Pobrania
583
Polubienia
61
Ocena
4,8
P
PrintablesOcelotzlasu

Just In Case but shorter

I thought that the original box looked weird so i made it shorter. I suggest scaling it up 10% or more because the hinge doesn't print for me in the 0.2 tolerance and breaks after one use in 0.4 tolerance

Pobrania
520
Polubienia
68
Ocena
4,58
P
PrintablesReviloRedab

Intex pool shorter skimmer

Intex pool shorter skimmer.

Pobrania
488
Polubienia
93
Ocena
5
P
Printableshodgeac

Elegoo Centauri Carbon Lid and three bed holder - Shorter and unlabeled

I replaced the original screws with 10mm M3 cap head screws to attach to the printer. I felt the original screws were not quite long enough to securely attach through the bracket and side panel while accommodating for the extra thickness…

Pobrania
449
Polubienia
63
Ocena
5
P
PrintablesGabriel

Ender-3 V3 SE Ball Joint Filament Guide Shorter

Made shorter to make the Light Bar fit. Light Bar: https://www.printables.com/de/model/683193-ender-3-v3-se-light-bar

Pobrania
419
Polubienia
61
Ocena
5
P
PrintablesChris Graham

Imperial Screw Measure Tool, but Shorter

Remix of the "Screw measuring tool, imperial" by cdlong. It's the Imperial Screw Measure Tool, but Shorter. We didn't need all of the diameters, so I knocked those off, made it shorter so it looks nicer, then added some magnet slots for…

Pobrania
414
Polubienia
47
Ocena
5
P
PrintablesTy10y

Franco Keychain (Shorter)

I didn't like how long RTM's keychain took to print, so I got rid of about half of the links to make it shorter! It's still a neat design that works great as a keychain. I printed mine with a raft to make sure all the little pieces don't…

Pobrania
412
Polubienia
48
Ocena
5
P
PrintablesKsprinter

Deadpool Bust - With round plate - Shorter

made it shorter to fill out my 22x22x25 printer better, printed at 45 degrees at 23cm height Neo Kobra - Anycubic

Pobrania
408
Polubienia
64
Ocena
5

Kobra 3 side wrap around fan duct shorter left duct

When I tried out bday998 ‘s model on my printer I discover the hotend wiring was forcing the left duct down into the print. So I shortened it so I wouldn’t be putting pressure on the wire and the fan duct wouldn't drag across the…

Pobrania
405
Polubienia
34
Ocena
5
P
PrintablesRoger Thomas

Shorter Christmas light hangers ( clips ) for a house

I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!). This is an alternative of my taller hanger with 2 screw holes. The picture shows the various…

Pobrania
371
Polubienia
31
Ocena
5
P
PrintablesThatGuy808

Shorter Shim for Lego Wreath Angles (remix)

Increased base height to strengthen and made less deep to make getting parts in and out a little easier. Supports: No Resolution: 0.3 Infill: 20% Notes: Sliced in Cura w/ Horizontal Expansion = -0.3

Pobrania
365
Polubienia
87
Ocena
4
P
PrintablesOctoYou

Easter egg painting tool - Shorter and improved instructions

A little tool to make it easier for you to paint the Easter eggs. An egg can be clamped between the two holders using the rubber band. The distance can then be optionally fixed with the screw. By turning the handle, the egg can be painted…

Pobrania
351
Polubienia
115
Ocena
4,86
P
Printablestoxilox

Oral B Steckdosenhalter with less supports and shorter

There is still ample space for the power cord inside the model. The "Einsatz" component remains the same, so if you have already printed that part from the previous model, you can reuse it.

Pobrania
328
Polubienia
25
Ocena
4,75
P
PrintablesKeyboardMouse

Universal telescope eyepiece smartphone mount for shorter eyepieces

I created a variant of the eyepiece mount that can be secured to shorter eyepieces too. I liked the original design, but I could only use it with my 25 mm eyepiece. With the new design I was able to use my 10 and 6 mm eyepieces too. BOM…

Pobrania
326
Polubienia
72
Ocena
5
P
PrintablesKevin

Honeycomb storage wall shorter tool holder

just a shorter version of the tool holder/shelf from Rob.. Check out the pics to see a size comparison… thanks

Pobrania
325
Polubienia
45
Ocena
4,67
P
PrintablesSaniainen

Shorter AEG M4 Buffer tube

I don't know why, but for some reason a couple of years ago buffer tubes with battery compartments have dissipated from all of my favorite shops and they were never restocked. So I made this. Size: -Tubes are 145mm long, about a notch…

Pobrania
323
Polubienia
16
Ocena
0

Shorter Door Seal for P1S

I liked the door seal created by Jia gantic but it did not fit right on my P1S - it would bind in the hinge if the door was fully opened. This remix cuts 0.8mm off the top of it and brought the legs closer together at the bottom for a…

Pobrania
311
Polubienia
72
Ocena
5
P
PrintablesJohannes G

MK3/S Shorter LCD Supports - fits Ikea Stuva

Shorter LCD supports designed so that the MK3/S can fit inside an Ikea Stuva enclosure with a hole for the bed cables. There is one hole for each side, slightly smaller than the bolt. Use a m3x10 bolt to thread directly into the plastic.…

Pobrania
294
Polubienia
21
Ocena
4,86
P
PrintablesMario Mateos

Ender3 V3 KE spool holder Shorter version

he same spool holder as the original but shorter. Ideal for those who use a side mount. As is not a structural piece, you can print in PLA without supports.

Pobrania
291
Polubienia
32
Ocena
5
P
PrintablesOcho Camino

Resmed Airmini Adapter for standard CPAP hose (shorter)

The original adapter here was unnecessarily long. To save space in my pack, I redesigned it in Fusion to be 18mm shorter. It also has some fillets and chamfers which make it less poky. Print with the narrow side down. No supports needed.…

Pobrania
286
Polubienia
25
Ocena
5
P
PrintablesRadioactiveLeek

DJI Avata 2 Stand - shorter base

Lower height base alternative for the linked model.

Pobrania
284
Polubienia
26
Ocena
0
P
PrintablesCeeBee

Bambu Lab Build Plate Holder|15 - shorter version

Remixed the the nice model from @javawizard_449936 to a shorter version to get it printed in the bambu lab x1c and with this version you can pull them out and dont have to lift them. (made a version for 15 buildplates, should be enough to…

Pobrania
277
Polubienia
27
Ocena
5
P
PrintablesManiok
Pobrania
267
Polubienia
38
Ocena
5
P
Printablesdaytrader

Vacuum cleaner nozzle - Staubsaugerdüse - MIELE - shorter Version

this is a shorter Version - fits a PRUSA and prints faster

Pobrania
261
Polubienia
15
Ocena
5
P
PrintablesChris

Shorter Headband for Face Shield with Closed Top

Modified an existing remix to close the top on the RC2 style face shield. The remix this was based on is slightly shorter than the Prusa version to reduce printing time and filament usage. The model with no hex holes was selected to limit…

Pobrania
258
Polubienia
0
Ocena
0
P
PrintablesSleepy

Bambu Lab P1P USB Cable Management Plate shorter

The original model is already perfect. I just shortened it a bit to make it fit my top riser for the P1P. If there is no need for the shortened version please consider downloading the original!!!

Pobrania
258
Polubienia
54
Ocena
4,5
P

Logitech Keyboard Kickstand (Shorter Version)

Remix of "Q8Khajah"'s logitech keyboard stand. I reused the rubber feet from the broken stock logitech keyboard stands and just reattached them to the ones I printed. I used krazy glue to secure the feet more permanently to the printed…

Pobrania
246
Polubienia
6
Ocena
5
P
PrintablesK3DD

Screwable Tighter Bambu Lab AMS stackable stand - Shorter Version Remix

@fredster's version was too tall for my Platsa cabinet. So I shortened the long part to 160mm. So I can open both AMS so

Pobrania
245
Polubienia
38
Ocena
5
P
PrintablesAshyr

4th Gen Toyota Tacoma Glove Box Drawers and Shorter Divider for JKCover Glove Box Organizer

I have a 3rd Gen Toyota Tacoma that also has a glove box organizer by JDMCAR that uses Joshua Dennis' Toyota Tacoma Glove Box Drawers . My dad recently got a 2024 Toyota Tacoma and purchased a JKCOVER Glove Box Organizer . He liked my…

Pobrania
234
Polubienia
51
Ocena
3,5
P
PrintablesPavel Smalec

INTEX - Mega Fountain - 40 mm, 50mm shorter - fixed

See description on original INTEX - Mega Fountain https://www.printables.com/model/237227-intex-mega-fountain

Pobrania
223
Polubienia
9
Ocena
0
P
PrintablesCraig

Lego Model Stand Shorter Arm (X-Wing 75102)

The original is very well designed and perfectly balanced. I couldn't fit the X-Wing on my shelf with the foils deployed so I remixed the arm. With the modified arm everything now stands 295mm tall with X foils extended. The arm is…

Pobrania
218
Polubienia
48
Ocena
5
P
PrintablesDDD Projects

Creality K1 - K1 Max Shorter Riser

I did not like the loud rattling of glass on plastic filament makes. I placed round furniture feet in the corners of the glass to reduce the noise. This made it still a little high and I also did not like the gaps. By reducing the height…

Pobrania
217
Polubienia
36
Ocena
5
P
Printables3dPrintNBots

Kingdom Core Class Null Ray and Vs 2 with shorter peg

This is a model based on the kingdom class Starscream's null ray. Seeing that the next seeker isn't going to have some, this should be a good replacement.

Pobrania
202
Polubienia
13
Ocena
5
P
PrintablesCorvus

HORIZONTAL Print -- Talon Magazine (10/15) -- (shorter feed lips for more compatibility)

Straight Talon Mag [ 10 / 15 darts ] --> Horizontal Print --> shorter feed lips to be compatible with more blasters (e.g. ONTOS and MULTI-TOOL) --> for Talon Magazine springs (wire springs) This is a remix of the nice combination mod by…

Pobrania
201
Polubienia
50
Ocena
5
P
PrintablesPrism08

Updated Dual cardan coupling (RC car transmission) shorter version

This will go times 2 in my RC 4WD design (in progress) but it also drives (partly) of the overall design size. So I decided to streamline a little bit. I was able to design a print in place part (much shorter) but prone to breaking (!) So…

Pobrania
201
Polubienia
45
Ocena
0
P
PrintablesLeo Lorens

Logitech C270 riser (shorter)

Very simple model, easy to print. I did it with: Sunlu Silk PLA+ blue Layer height: 0.2mm Printer: Elegoo Neptune 3 Pro Slicer: Ultimaker Cura 5.3.1 Supports: not needed

Pobrania
201
Polubienia
21
Ocena
4,4
P
PrintablesJT Labs
Pobrania
196
Polubienia
21
Ocena
5
P
Printableseponymous

Steam Deck Belly Stand WOBBLE REMOVER Screw: Bigger AND Shorter

I loved Dadgrammer's screw remix for porgekins's Steam Deck Belly Stand Adjustable (sooooo much easier to tighten/loosen), but while it significantly cut down the unthreaded part of the screw, there was still about 0.5mm of play, which…

Pobrania
188
Polubienia
11
Ocena
0
P
PrintablesMatt

Shorter version of Insulin vial holder

This is a shorter version of the container I did in Tinkercad.

Pobrania
186
Polubienia
24
Ocena
4
P
PrintablesRed Haniwa

Ender 3 shorter Z-stop limit switch bracket

I had to loosen heat bed's spring too much for it to touch the nozzle, which doesn't help with overall stability of the bed so I remixed a shorter bracket from tichoh's. Shorter brackets are in 40, 43 and 45mm length, just print one that…

Pobrania
185
Polubienia
15
Ocena
5

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen (v1.3.4) SHORTER VERSION (180mm) FOR SHORTER PRINTERS

Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…

Pobrania
182
Polubienia
23
Ocena
0
P
PrintablesUnstizzy

Shorter Filament Poop Bin (150mm) - 2 versions

made mine in .3 with extra filament that has been sitting out for a year hence the beauty marks on the print but turned out ok. Made 2 versions: more poop version and one that is more aesthetically pleasing.

Pobrania
180
Polubienia
7
Ocena
5
P
PrintablesMOCCOR

More Airflow, Quieter Fan Noise, Shorter Cooldown - 4010 to 25mm Fan Duct - Ender 3 V3 SE

I designed this myself 100%, I didn't edit the original, but since I did use the original for some quick measurements I think that counts as a remix. The changes with my duct compared to others is, it fits correctly. It isn't off-center…

Pobrania
179
Polubienia
26
Ocena
0
P
PrintablesCeeBee

Bambu Lab Build Plate Holder|14 - shorter version for thicker plates

Big buildplate holder for wider slots for glas, carbon and PEX/dual sided PEI buildplates: 2x glas (thickness of the buildplate: 3,5mm - slotwidth 4,5mm) 2x carbon (thickness of the buildplate: 2,8mm → slotwidth 3,8mm) 10x PEX/dsPEI…

Pobrania
178
Polubienia
20
Ocena
0
P
Printables⠀

Neptune 3 Pro Clip-On Printbed Guide (No Adhesive Needed) | Shorter Version | REMIX

UPDATE 1: made a new model from the scratch – it's super tight fit and hard to install but worth it Description : This is a shorter version of the original model:…

Pobrania
178
Polubienia
33
Ocena
5
P
PrintablesColt45RPM

Shorter GFCI Outlet Shelf

Outlet shelf for a single gang GFCI outlet with a shorter overall length.

Pobrania
176
Polubienia
35
Ocena
0
P
PrintablesSteven

Low profile / shorter Prusa MK4 LCD display supports

This slightly reduces the footprint of the MK4 by shortening the LCD support length by 10mm

Pobrania
170
Polubienia
27
Ocena
5
P
PrintablesTedtot

Shorter Voron/Monolith pulley dehubbing tool

Stock Voron/Monolith BOM does not include M5x50 SHCS. The original model was a shy too long to use M5x40 SHCS, which should already be on hand. V2-beta changes: Choice to use an M5 T-nut instead of an M5 hex nut to increase contact area.…

Pobrania
167
Polubienia
24
Ocena
5
P
Printablesksanislo

Mega Zero shorter ring cooling duct upgrade (MK8 compatible)

This is nearly identical to the original https://www.thingiverse.com/thing:4631288 except the "middle" section between the fan and the flat bottom area has been reduced in height to 80% to accommodate the slightly shorter Creality Ender…

Pobrania
164
Polubienia
22
Ocena
0
P
PrintablesNikita Ign

ATX Case/Bench - Shorter & Lighter

Case was modified, so my PSU would FIT. I printed the original one and oh boy.. The chamfers - WHY? Literally had to cut open the case so my PSU would fit in there. But when I wanted to print another case like that, I started redesigning…

Pobrania
155
Polubienia
21
Ocena
0
P
Printablescyberal

Blobifier for Micron (shorter base, rack and pinion tray and 1515 extrusion mount)

A mod for the Blobifier mod that replaces the tray and servo arm with a rack+pinion mechanism to allow for a shorter base. Note: I'd recommend adding some plastic-safe grease to the rack and pinion interface to reduce wear and tear in the…

Pobrania
153
Polubienia
43
Ocena
0
P
PrintablesRNLDNKP

Cotton pad and swab / nail cutter/file holder (shorter version)

Remixed the original by Sergej to have a shorter cotton pad 'tube' since most of the time it would be half empty, which you can also see at most of the original makes. Use it to store your cotton pads, nail file, swabs, nail cutter and so…

Pobrania
150
Polubienia
22
Ocena
5
P
Printablesartofdecks

SHORTER DRAW LATCH FOR 6U GRIDFINITY RUGGED BOXES

Shorter version of the original draw latch that allows 6u boxes to sit flat when latch is closed

Pobrania
149
Polubienia
24
Ocena
0
P
Printablesmakerdog

Spool Holder Bambu Lab P1P & X1C shorter lips

I slightly changed the lovely design of GrumpyNinja64 to my needs. The original file had a 1mm gap between the two parts and I extended the female part by 1mm. The lips where too long for me and I shortened them 3mm and changed the form…

Pobrania
145
Polubienia
21
Ocena
5
P
PrintablesGiobby66

Shorter Bottle Cutter

Thank you for downloading my design. Remember to like the model if you download it! :) Check out the original design by dav88! Please consider offering me a beer if this helped you! PayPal: @giovannicolo // [email protected]

Pobrania
137
Polubienia
16
Ocena
5
P
Printableslizard_e_

Closet Rod Filament Hanger (Shorter)

I printed with 3 walls and 15% gyroid infill With my settings (on my printer), the spool can hang from just 1 side of the hanger. The second side can be printed out for even hanging which looks better and offers additional support

Pobrania
136
Polubienia
11
Ocena
5
P
PrintablesMartinDubu

Longer Arms, Shorter Legs

I found the standard Carbon 13's proportions to be slightly off, legs too long, arms too short, so I just took the models and extended them.

Pobrania
134
Polubienia
18
Ocena
5
P
PrintablesSteve Hanov

Anet E12/E16/ET4 Part Cooling Fan Duct for shorter hotend

This is a remix of El_Terla's excellent work. It's just shorter so it won't hit the build plate when using a cheap MK8 hotend made for Ender 3. Fits right in and uses existing screws. All you need is the printed part. Print in PETG if…

Pobrania
131
Polubienia
3
Ocena
0
P
Printablesjazzykat

Shorter lens couplers for modular 35mm film scanner

My macro lens needs this to fill the frame better so i modified the 52mm lens adapter and other parts to be much shorter

Pobrania
130
Polubienia
15
Ocena
5
P
PrintablesEjas Mudar

Saitek/Logitech Yoke Mounting Screw - Shorter

This is a shortened mounting screw for the Logitech/Saitek yoke so that it fits under my table without hitting the keyboard drawer. This is based on Zerink's design, with smaller screw head and a larger bulb on top so that the mounting…

Pobrania
128
Polubienia
7
Ocena
5
P
PrintablesRobo_Kong

SD Card Grip Shorter (fits in spring loaded sd slot)

This is a smaller version of “https://www.printables.com/model/77594-sd-card-grip” because the original one does not work with the cr-10 SD card slot. This works great for the spring-loaded holding SD card slot.

Pobrania
121
Polubienia
18
Ocena
5
P
PrintablesLinkynoodle

Ball Valve Wrench - Pool Valve (Shorter Version)

Same as https://www.printables.com/model/211562-ball-valve-wrench-pool-valve/related But I shortened the handle

Pobrania
119
Polubienia
17
Ocena
5

Shorter Klicky Probe Bracket for ZeroG Mercury1.1

I am using a KlickyNG probe on a Voron Stealthburner on my Mercury 1.1. Based on an Ender 5 pro . I ran in to an issue integrating this into my machine. First, the stock Klicky probe mount extended too far over the print bed, greatly…

Pobrania
118
Polubienia
19
Ocena
5
P
PrintablesThe Next Layer

Even SHORTER Filler Filament Spool System

I liked the shortened and curved Filler remix, but it still had a completely unnecessary 15mm sticking out for the rolls that I use, which limited my access to things behind it... so I chopped it down even further. It'll now be a real…

Pobrania
117
Polubienia
18
Ocena
5
P
PrintablesCnrcg27

Clipper Sleeve For Shorter Clipper Lighter

Short Clipper Lighter Sleeve With Refill Hole

Pobrania
117
Polubienia
21
Ocena
5
P
PrintablesAdam

Shorter Gamesir G8 Extender to Hold ASUS ROG Z13

Shorter Gamesir G8+ holder for RRTronics extender. settings: .2mm nozzle

Pobrania
115
Polubienia
7
Ocena
0
P
PrintablesBasvH

Shorter Märklin C-rail buffer stop with wall

The original Märklin C-rail buffer stop was too long for my layout. I made a shorter version that reuses the original buffer. This version has a wall as endpeace. Can be used seperatly.

Pobrania
115
Polubienia
7
Ocena
5
P
PrintablesMr.B

Deburring Tool Skadis T-Nut Mount / Shorter Version

Same like the original amazing holder but shorter. It will print faster and you will need less material.

Pobrania
115
Polubienia
15
Ocena
5
P
PrintablesSaga34

Shorter low profile side mount spool holder for AD5M

I just shortened the original model so that it fits all my spools from different brands (up to a maximum of 69 mm (6.9 cm or 2.75591 inches)) so that there wouldn't be as much play and the spool wouldn't move around. If you haven't…

Pobrania
113
Polubienia
20
Ocena
0
P
PrintablesScared__Bunny

Shorter Bobbin Holder - Unterfadenspulenhalter kurz

Just a shorter Version of the Original. Now also fits on smaller thread spools i.e. Gütermann. Works in Pla. Should work in Petg aswell or better. Very good Print For Filament leftovers Pleased rate, Show and Happy Printing!

Pobrania
113
Polubienia
27
Ocena
5
P
PrintablesVanessaE

IKEA LACK Table Screwless Stacker -- shorter, smoother

Making the assumption that there will have some amount of weight on it, I've made a very short version of salzig's LACK table stacker model, thickened the walls a bit, resized the leg "receiver" hole a bit and beveled the edge to account…

Pobrania
112
Polubienia
11
Ocena
5
P
PrintablesKrzysztofGW

PolyDryer Dessicant Tray and Lid (shorter)

Based on Alexander's model, but made it shorter for better air circulation inside the PolyDryer. Also my lid has smaller opening (you can use my tray with the original lid). Ready to print. You do not have to change the layer settings.

Pobrania
109
Polubienia
13
Ocena
5
P
Printablessylviatrilling

Calla Lily--revised with much shorter stem

This design with a much shorter stem works better for me visually. The g-code and the 3mf include the color change. Infill at 100% recommended.

Pobrania
109
Polubienia
11
Ocena
0
P
PrintablesYevhen Kifiak

Creality K1 X Carriage Cable strain relief for softer and shorter springs

This mod was created to replace stock springs with softer ones. It's hard to find springs with the same lengths so I changed cable strain relief to compensate smaller length of the springs. Stock spring: wire diameter: 0.8mm length: 12mm…

Pobrania
107
Polubienia
16
Ocena
5
P
PrintablesWenen

Ender 3 V2 BL/CR Touch Bracket 2.5mm shorter

Made it 2.5mm too short because my probe was too low, causing it to scrape against the bed. Also added some holes for the probe's mounting screws.

Pobrania
106
Polubienia
7
Ocena
0
P
Printableskisanto dyrmisi

hotweel display shorter model

you can stak your hotweels with this display

Pobrania
105
Polubienia
19
Ocena
0
P
PrintablesRoot-Core

Anet A6/A8 Y Belt Holder for shorter belts (with correctly installed transversal)

This thing enables you to use shorter belts in a printer with the traverse bar mounted on the lower side. This is a remix of https://www.thingiverse.com/thing:2782170 which is a remix of https://www.thingiverse.com/thing:2347849 Update…

Pobrania
102
Polubienia
9
Ocena
0
P
PrintablesMartins3DStuff

FT EMS Shorter Cable Ducts

I needed shorter Cable Ducts for my build, so i created this Hackjob in Prusa Slicer...

Pobrania
101
Polubienia
14
Ocena
5
P
PrintablesZoe

HSW 25mm paint holder x 6 shorter version

I wanted to be able to read the paint colour names on Army Painter Fanatic colours so made the wells for the storage a tad bit shorter to make it possible to read them. Print settings I am using for sturdiness: infill: 50% perimeters: 4…

Pobrania
101
Polubienia
12
Ocena
5
P
PrintablesThomas Riesel

Prusa MK4 bin remix, shorter version to support Squash Ball feet mod

Reduce the size (-50mm) to support squash ball feet damper (https://www.printables.com/de/model/50938-low-profile-toolless-prusa-i3mk3s-squash-ball-feet). With this shorter version I can use the bin AND the squash-ball-feet.

Pobrania
100
Polubienia
13
Ocena
5