512 modeli
IMPORTANT: The mounting hole distance are slightly off with the official bracket, thought I didn't notice much difficulty during installation, so I can't be bother to correct those. But do let me know if it is necessary for your usage.…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Traffic light for the model (road width should be 13cm) The signal has three lights (green, orange and red) and floats on the road. It is easy to install with 3 screws. In my mockup, it is controlled by arduino uno r3. dimensions: 9cm x…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Print the parts as shown. The body is printed at a 45 degree angle. The gcode and the picture use a 10mm support enforcer, but a brim is sometimes all you need. I used ABS as the holster sees a lot of UV. Print the other parts as shown.…
Wydruk około 3,85 €–4,71 € nettoWstępna wycena jednego wariantu
Requires 2 pieces of 3/4" x 5" (19mm x 125mm) Velcro one-wrap. Use a piece of 1.75mm filament as a rivet to retain the slider. The slider uses the belt clip button on the back of the radio to lock the radio in place. Print at 45 degrees…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
I modeled this in Tinkercad as a rough and ready replacement for the swiveling hook on the strap (GM00001288) of my LED work light (Makita DML801). It is by no means perfect, but takes hardly any time to print (41 mins) and seems robust…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena jednego wariantu
T800 taken from many components here on thingyvers. I decided to whip up a T800 bust for a mates birthday. Then I got carried away and designed these make shift shoulders, then I couldnt help myself again and added some hands and so on.…
Some simple shoulder buttons I found online.
The 3 plates can be attached by glueing straps to the inside of the larger shell and to the outside of the smaller one. I made this one for the right shoulder. It's not perfectly symmetrical, so if you want to use it on the left side I…
I made this mostly for the Vanguard 13, but it uses the same mounting system as the stock ATAB cannons. You can use it with the multi-arm backpack I posted a little bit ago. For added flair, you can print the bottom of the gun in a…
I tried to respect the original design as much as possible. Print settings: Filament: PETG, PLA Layer height: 0.15mm Supports: no Perimeters: 2 05/04/2022 Add shoulder parts "CShoulder.stl", "EShoulder.stl" 09/04/2022 Add shoulder parts…
For the uninitiated, this ornament is inspired by a sketch from the endlessly funny Tim Robinson's Netflix series, “I Think You Should Leave”. For the initiated, pretty funny show, huh? Want your Christmas tree to be sidesplittingly…
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
This model is compatible with the lego system.
This is a holder for a Joycon to make it more comfortable than using it on its own. I have included shoulder buttons on the holder so there is more to press. There is an included version of the STL with these buttons removed in case…
Remixed by preventing the shoulders from dropping when the figure is posed. Replace the armor shoulders with this remix to be able to use the shoulders for the skin. Download all other parts from Soozafone link
Use It For Decisions When You Don't Know What To Do.
This model is compatible with the lego system.
This is the second piece of several pieces that will eventually make the Predator gear. The idea is that these props could be used by cosplayers. This one the Shoulder Cannon Backpack for my Plasma Caster . It does not require any glue or…
Highly recommended the use of Hunky_clavicle_2mm_added_for_hip_armor.stl https://www.printables.com/model/747026-hunky-13-dummy-13-variant-larger-clavicle-shin-and/files
This is a digital 3D printable model of Mandalorian Mudhorn signet shoulder armor . The download contains 3D models ready to be 3D printed on a 200 mm print bed in STL and OBJ formats. It’s placed on the print bed as we would print it to…
Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…
Another cool Pep files from Pepakura.com Please always check the sizing suits your needs and adjust accordingly Cheers Jace
Cool Curved Shoulder Plate
This model is compatible with the lego system.
The Mandalorian beskar armor shoulder. Modeled from scratch based on on-screen pics. Use two glued elastic bands to secure it in place, the lower one around the arm and the upper one around the chest. UPDATE: Remodeled the shape to better…
UPDATE: It seems that Bambu Lab has made a change to the bottom plastic tray that these feet fit into. They have increased the tube height by about 3mm or so (I'm guessing they added length to accommodate the new rubber feet they sell)……
Note: I wanted to create some modern-ish shoulder armor for cosplay and started with some Helldivers armor as base. As i progressed with prototyping i felt like it wasnt quite to my liking in how it looks, but still wanted to publish it…
This model is compatible with the lego system.
This model is compatible with the lego system.
Great for people who need to carry bags but still hold hands with a child or hold a stroller. I designed a 3D printed bag support that can be carried by hand or worn on the shoulder. It is made with PETG filament for the main structure,…
This model is compatible with the lego system.
I created a version of the “Narrow Outer Shoulders” for the Prusa Mini some time ago (https://www.printables.com/model/101956-r130-outer-shoulder-for-180x180-printbed) and printed quite some pieces since that day. Now I do own a bigger…
This model is compatible with the lego system.
The last pieces I need to smooth out my whole model was to round out were the shoulders and biceps. The biceps pieces from Smooth were good, but it needed better shoulders. I had to tighten them up, and make them smaller and more fitting.…
Human head to use as a prop, decoration, or as a friend in the late night studying. Designed using blender software.
This model is compatible with the lego system.
This model is compatible with the lego system.
Just a remix of the original F16 Model by Perinhoo but the files should work on all slicers. Also, note that the stand that holds the plane up doesn't have holes to connect to the base or the plane so keep that in mind.
This model is compatible with the lego system.
This is the second part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…
the Mandalorian's shoulder armor both the normal one and the one with the mudhorn insignia
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
Bought original anti-vibration feet from Bambu Lab for X1C. Soon enough I've found out they are useless and they will eventually pop out from the printer and might cause some serious damage to the printer when printing. Bambu lab has…
Parts needed for a simple shoulder rig following 15mm Light Weight Support standard. For mirrorless cameras or smaller. The base plate screw spacing is made for a smallrig camera cage. Metal 15mm rods are needed for final assembly.…
This is a Wall mount for the Nozzle and the Bosch Professional GBL 18V-120. The device-Mount was optimized for the blower, but shoult also work fine for other leight Bosch Pro 18V-Tools, since it's attached to the base. Screw holes are…
This model is compatible with the lego system.
Can be used with both the Male and Female Carbon 13 Models.
This is another piece of several pieces that will eventually make the Predator gear. The idea is that these props could be used by cosplayers. This one are the armour plates for shoulder and chest. It does not require any glue or…
remix from https://www.thingiverse.com/thing:2334264 The original idea is great! I wanted shoulder mounts for my gopro and insta360s long time and finally found the Nicrombious's one! But I also found some stress concentration on original…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
This model is compatible with the lego system.
This was a request after I did General Kenobi's Armour. Sorry its taken so long. Just trying to catch up with a back log of requests. Please check the sizing suits your needs and post some pics of your progress if you do take the…
Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…
This model is compatible with the lego system.
Hi Steve, Here ya go buddy. I assume this is what your after ; ) I'd uploaded the suit to Etzy to generate a couple of $ so I could buy material for my 3D printers. But it hasnt really been a great success, Still I probably should have…
This model is compatible with the lego system.
This is made for the right shoulder
This model is compatible with the lego system.
After seeing the Lucky 13 articulated figure by soozafone I knew the amount of articulation could be used for a lot of variations, and this was one of the ones I immediately started working on. I replicated the head and split it into a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This was an 18h print at 0.2mm layer hight. No supports. I printed v_1.1 and have made minor adjustments to the v_1.2 (spot differences from photos to model). Will need make additional refinements. Like the second tone fillers are way too…
(I have been busy updating all my Phase 3 trooper parts and they should all now be scaled for 1:12, 1:6 and 1:1 and I have recently added the left knee part and now this piece.) Hi, still learning to 3D model here, I created from scratch…
This model is compatible with the lego system.
sholder mount in my skeleton shattered from over tightening so i made a replacement
More or less as featured in Season 3 Episode 2 of “I Think You Should Leave with Tim Robinson”, its the Feed Eggs game in physical form! Sadly, no bush is included. Magnets are used to hold the creature and basket to the base, but they…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Simplistic 3D model of a shoulder pauldron. Smooth, reasonably thick and about the right size for a large build. Resize and remix to your liking.
Updates to ari.mandjelikian 's excellent model to add a few more options to help with storing smaller items. The three-tier version has small pegs to help it locate correctly on the lowest level box that will need some supports. The top…
This model is compatible with the lego system.
This is Jhin's shoulder cannon from League of Legends! This model was ripped from the in game Jhin model and edited to look better. I would recommend modifying the model in whatever program you prefer to use in order to shape it to your…
Hi Anthony, Just doing the shoulders now so should have them loaded up later today. Do check the sizing suits your needs and let me no what you think, Cheers Jace
These are some simple shoulder straps that people can use to mimic the ones seen in season 3 of the Mandalorian
3D scan of Shoulder Blade Scan - Scapula (Right) Missing Coracoid process! (part of the bone is missing) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection…
This model is compatible with the lego system.
These are the 3D models in .STL, .3MF and .step format of the shoulder buttons for the Sony PSPGO (PSP-N1000) handheld console. The left shoulder button on my PSP GO broke and I could not find a replacement button. I modeled and printed…
So having looked over cap that it appears that the creed mandos have scavenged whatever they could find... I saw mudtrooper shoulder bells and biceps, shoretrooper bells and some post imperial bells Shoretrooper Shoulder bells and…
The CMPSR is an open source 3D printed folding shoulder for violin. This prints with minimal supports, and the areas which do require supports are covered by the foam pad. This fits a standard full size violin. Materials (4) M5x10mm bolts…
Quickly threw this together at the request of my nephew for his car - concept and size roughly based on a few examples I saw on the market, exact angles and dimensions down to your own needs … made it parametric so he, and now you can mod…
This model is compatible with the lego system.
Here is my third version of a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the game, but if you're making a costume for…
This model is compatible with the lego system.
Dont know what to do ?! Throw the dice and let fate tell you what to do. 12 different possibel things to do. Try out if you ask your self what you should do :D Hope you are enjoying the To-Do Dice Check out my Designs on Pinshape.com…
A washing machin has teared my wife bra shoulder strap. Both ring and "eight" were destroyed. The fix was needed - infant feeding bra. Open designs were made to avoid ripping and sawing strap loops - stitches with high load and…
UPDATE: added scaled versions in 1:12, 1:6 and 1:1 scale. Although this model is now obsolete as I have since made a new non remixed version (see my other models) I will leave this version up for those who want it as some may prefer this…
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
This model is compatible with the lego system.
This model is compatible with the lego system.
Shoulder armor parts for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included are 2 versions, v1 with no raised ridge and v2 with raised ridge to give you options for how you wish to customize the…
Another awesome prop from Marvels Thor 3 "Hulk Helmet" I've left the centre of the helmet hollow incase you want to get an old brush from the local hard ware and add actual brisells. please cehck the sizing suits your needs as the Hulk is…
There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…
Got my Prusa i3 2 months ago and love it. Was thinking while building it an allen key T handle would make sense. And a nut holder/driver. I may have got a bit carried away… The idea is to use the screw driver “ends” in your fingers or put…
Print at 35-60 degree angle . use supports.
I used tinker to lengthen the clavicle because I wanted that broad shoulder look
As a special request to Nicole Davis https://www.thingiverse.com/daviscosplays/about Here is the chest armour to go with the helmet. As for the canisters on the back. I wouldnt waste fillament attempting to print those when you could…
New model, new armor! I'm going to keep doing what I do best and make the types of armor bits I would have loved to play with as a kid. I took the pauldrons from my Bastion/Rampart 13 and added them to the Carbon 13. It limits the range…
This model is compatible with the lego system.
This is my remix of a Raspberry PI Zero WH or PI Zero 2 case. This work was made from scratch but the idea was based on this case: https://www.thingiverse.com/thing:3952272 I designed it with the following enhancement from a design I saw…
![Bulky Shoulder Armor + Clip for Attachments [Unpolished]](https://media.printables.com/media/prints/894836/images/6928491_7c419462-5c7c-43cf-91ee-5a081637d2c3_3d6ae363-f47c-4261-a85d-413b03bba5c4/armorcutup.png)
