130 modeli
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
Shout out to all the USMC Moms
Update: PFC, LCpl, and Sgt ranks have been fixed! I created these separate from the other ones because in a Gun Club, ya gotta have guns! Have fun with these for Hail and Fairwell gifts, Moto decor in your workplace, home or bedroom,…
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
The Coat of Arms of the USMC, in a simplified STL. The original site states the following for all models: Все модели взяты в открытом доступе либо куплены.
Shelf for use with Leviton SMC cabinets. Slots on top and sides should allow you to use either tie-wraps or velcro straps to secure the items/devices to the shelf. Print standing on its side using tree supports. Created from scratch using…
Experimenting with an Eagle, globe, and anchor with a skull on the back of the globe.
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
This a remix of rainb0w_wheez3's 8/16 port Keystone patch panel made to mount into a Leviton Structure Media Center cabinet. It flexes a bit in the mounts when using normal plastic push pin mounting connectors, but seems to hold up well…
Krabička pre ovládač krokového motora ZK-SMC01 @https://www.aliexpress.com/item/1005005124688985.html Vytlačené bez podpory. PETG / vrstva 0,2 / obvod 4x.
I created (2) different types of the First Sergeant rank, the flat diamond or the 3D diamond version at the center. When printing the 3D version labelled as “1stSgt V2”, the below perimeters worked best using the Cura Slicer: Print Speed:…
I created (2) different types of the Sergeant Major rank in order to choose from a plain and flat star to a 3D version star at the center. When printing the 3D star, labelled "SgtMaj V2", the below perimeters worked best for me on all of…
To all my Devil Dogs! Need to put you phone somewhere so you don't lose it? When Field-day Inspection comes and wanna show off how Moto you are? How about looking Moto-stylish at work? Then print one of these in various colors, add…
In Cura, the settings below worked better for me with this chevron and printed nicely: Quality: Detailed/High quality settings (to get better detail for the bursting bomb) Nozzle Tip: 0.2 - 0.4 (Can use a wider nozzle if printing size is…
Leviton SMC 6 & 8 Port Keystone bracket, smaller to fit better on a Lulzbot Mini 2 build plate and take less time.
I needed a renal friendly way to display my NCO sword instead of it gathering dust somewhere. Use 3M velcro to attach to wall and tape/foam to pressure fit the scabbard. f3d file included so adjust to your liking or make it work for other…
Ammo Box Key Chain No supports print time in less than 2 hours Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .12 Infill: 40 Filament: Amolen https://amzn.to/3nJW1MO PLA Olive Drab Notes:…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. The model is for the USMC ACV unit . While…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC MTVR unit . Three…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC ACV-30 unit. Note…
A small shelf for Leviton SMC's. The shelf can be positioned more left or right by attaching the shelf in different sets of grooves. Support me on ko-fi.
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. The model is for the USMC JLTV unit , and…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. The model is for the USMC LAV-25 unit . While…
They are made with such small tolerances that they should just stay on, but incase they are a little bit loose, you could use a tiny bit of sticky tape to fix them into place. Mine hold without any tho. They are for 8mm hex bolts so they…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This is a model for the USMC Rifleman unit.…
For the “Whoa-Club” that navigates in the gray of the USMC! Can be used for the US Navy and US Coast Guard Warrant Officer ranks by using a different color for the blocks. If using an FDM Printer, in particular using PLA, I recommend…
A dropstock for the G&G SMC-9. Uses the normal hardware to mount. You do lose the magnetic snapping part though.
For testing step motor performance resp. your DIY projects a ZK-SMC-02 is a real helpful tool. This is a case for it. Without a case it is not convenient to work with the controller. Printed on my MK4 with Prusament PLA Gravity Grey. The…
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Officer/NCO unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Corpsman unit . The…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC 60mm mortar team unit…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC HMMWV unit . Three…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC UTV unit . While…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M2 (.50 cal) gun team…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC grenadier unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC sniper unit . While…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M249 Gunner unit.…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Javelin team unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC MAAWS gunner unit.…
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
Used container file. made the inner card holder. added text and EGA
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M240 gun team unit.…
This is an original, custom-designed 3D printable enclosure for the Heltec V4 board. The design is simple, functional, and made for easy assembly. Features: Designed specifically for Heltec V4 Uses M3 DIN 912 screws (M3x16) and M3 nuts…
Since I drag this mixer around in the studio for controlling my stream audio, I needed a permanently attached stand. To give it a tight fit and prevent rattling, I attached some rubber pieces behind the mixer and some rubber feet. The bar…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC aviation ground crew…
APC SMC1500I Bezel 2x M3x20mm bolts required to piece the front together. I tapped the PLA to thread into and it's plenty strong enough. I've yet to get around to filler/paint but the body of this is good enough to share for others to…
Ich habe für die KTM SMCR 690 BJ. 2019 Stopfen für die Fußrastenhalterung entworfen. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%
USMC Coaster Set Marines Devildog Devil Dog United States Marine Corps 100mm With Holder
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. Note that this model is for the USMC Black…
Save your thumbs when loading BBs
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC EW operator unit .…
I created this clock face for my father who is a retired Marine. I created it in Fusion 360 then exported the 3mf. I've included a step file and the 3mf. The 3mf was scaled 2mm larger in the slicer to account for a little extra space that…
I will make some better photos when i have some time :) For questions u can ask
Ich habe für die entworfen. Stopfen Oben und Unten unterscheiden sich in der Tiefe. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%
This mount allows you to position a Berotec CUMPAN below the instruments of a KTM 690 SMC R (2019), possibly also other models. It raises the CUMPAN to the same level as the display and provides solid contact with both the triple clamp…
SMC bracket for mounting a Frontier GPON ONT model FOG421 into common Structured Media Cabinets. This includes printed mounting tabs for hanging the device, so no screws are necessary to be added after printing. Use the appropriate…
This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting…
6 mm hols Category: Replacement Parts New Modell is now out !!! https://makerworld.com/en/models/23629#profileId-359006
Designed for 3mm counter-sunk screws .
CNC motherbord BSMCE04-PP box Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Plastika Trček PETG any Category: 3D Printing
This is a 3D-printed holder designed specifically for the M-Vave SMC-PAD MIDI controller. It allows you to mount a phone or tablet directly onto the device, which is especially useful for setups using the Koala Sampler app. The holder is…
This is a fine Focuser based on a design from wal20. It uses two #6-32 screws to tension and lock on a piece of steel plate. Beneath the ring are a piece of felt to ensure a good lock down. Print instructions Printed on a Prusa Mk2,…
Printed with MK3+, PLA OKey but preferebly PTEG. Print it standing with supports. Update 20231226 with new DIN holder and opening for easier mount/dismount.
Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…
The WiiM Amp is pretty heavy and I wanted to develop a mount for the Leviton Structured Media Center (SMC) That would be able to handle the weight. I added a lot of mounting holes so you can place it in either side or in the middle of the…
Printed in PETG with 0.2 Layer height, 2 Perimeters and 0.4 Nozzle. Infill was 15% I added the Logos in Prusa Slicer. they are not included in the STL. I will add a photo where it is on the Monitor, i just do not have it here at the moment.
Need to mount network gear in a Leviton Structured Media Cabinet (SMC)? Tired of having to find the exact printable that fits your network equipment? This set of printables can be used to build out a scaffold where you then use then Hook…
I liked the model originally done by JHagen, but wanted to make it a sculpture for my father for Veterans Day, I added a base with an angled front and added text, "USMC and his rank of Master Seargent when he retired. Printer: Anycubic…
The front cap is a friction fit, while the back cap locks in place via the camera's mounting points. I added texture to the outside edges to make it easier to put on and take off.
Halterung für einen SMC Druckregler SMC AW30-F03DH-B mit passender Mutter M38x1,5mm zur Wandmontage
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
This works with the original hardware such as: Brass bushing Threaded rod Folded stock spring, plunger pin No post-processing required apart from a little force when inserting the brass bushing and the threaded rod. Recomended settings:…
OSMC Kodi Remote Control Stand Remote:…
I made this cage to be used with GEPRC Vapor D5 specifically but if you are already routing the XT-60 cable to the side it would work with most drones. Tried to find a good balance of durability and weight (it's about 15.7 grams). The…
The original blinkers for the SMC Ram are trash. By Swiss law there must be a certain distance between the numberplate and the blinkers. With this mount the problem is solved. DO NOT PRINT IT FROM PLA. PLA is not weather / UV resistant.…
Box for the Standa 8SMC5-USB stepper and DC motor controller with M6 screw mounting points spaced to match 25 mm optical table grid. Files include modifiers that can be used to force mesh bottom and top to allow for air circulation. To do…
Every now and then I ride with Navi (TomTom Rider 550) on my KTM SMC-R (2019) Unfortunately, the original TomTom mount looks really shitty and is also very high. I'm also too lazy to unmount them completely every time I drive without the…
A recreation of the folding stock backplate for the SMC-9. As the original part typically breaks at the hinge point and is hard to aquire without contacting G&G directly , I decided to design this 3D printed version with works really…
Only prints one side.
Discover the ultimate in simplicity and functionality with S.M.C. our Small Multifunctional Clip. This sleek, compact accessory combines the convenience of a bookmark and a paperclip in one minimalist design. Say goodbye to clutter and…
Created this for a friend as they did not like how the Vero V looks. Top should be printed from the flat side and same with the Base (They should be oriented correctly for printing already). Supports recommend for the rectangular…
I wanted to print this model for my father but wanted to give him the option of displaying it on a shelf or hanging it. The model printed great in Overture Black PLA. 0.2 First layer height. 0.24 Fist layer width 0.15 for all other…
Adapter for the robot KUKA VKR16 R1610-2 (CYBERTECH) to hold the gripper SMC MHZ2-25C. The blueprints of the gripper are on the photos.
Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR Support ZWO EAF and ZWO ASiair OpenSCAD source code on GitHub BOM 1x Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR 1x PK-EOS Mount Adapter Ring 1x ZWO…
english: Because I am too fat :), I bought a lightweight battery ( http://www.asn-shop.de/Motorrad-Batterie-132V-5Ah-V3-4s2p ) for my KTM SMC-R 690. The new battery is way smaller than the original one, and so i designed a insert for the…
This is an adapter that allows the Ubiquiti Access Point Wifi 6 Lite (U6-Lite) to be installed in a Structured Media Center (SMC). The mount that included in with the U6-Lite is screwed to this adapter using the included screws. The…
This works with the original hardware such as: Brass bushing Threaded rod Folded stock spring, plunger pin No post-processing required apart from a little force when inserting the brass bushing and the threaded rod. Recomended settings:…
PLA opal green Prusament 0,4 nozzle
The mount is designed for a single illuminated push button (see https://eckstein-shop.de/QITARuggedMetalPushbuttonwithBlueLEDRing-16mmBlueMomentary ) and contains an overhang to place it behind a wall-mounted shelf (so that it cannot move…
Needed a way to connect Canon FD/FL lenses to a RED Brain and still have the infinity focus. Adaptor rings (EF-FD) won't work due to the different mount distances, so I designed a completely new RED Mount. It is supposed to be used as a…
This is a close 1:1 model of the G&G SMC-9 Bolt labelled (Part: GHJ-A04, A013, A015). (Images showing only the rear being printed, but either side of the bolt will work with the OEM) You will need the other parts that make up the whole…
Remix to add holes for mounting in a Leviton SMC. Pattern for mounting to one side or central in the cabinet.
This is an extended magazine baseplate for FEG SMC22 magazines to add a little bit more room for your pinky.
I needed a simple way to secure my pi zero to my network cabinet.
This is a 0.8 MOD gear 65T for Pentax SMC600 F4, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or ZWO EAF stepper motor with 54T gear…
I picked up an SMC-PAD for pennies, but as the saying goes, "you get what you pay for"—the sensitivity leaves much to be desired. Looking for a budget-friendly fix, I stumbled upon OwlMuso's video about using electrical tape to adjust the…
![Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR](https://media.printables.com/media/prints/1116201/images/8431782_befdcc04-f9f2-4a85-bdd8-38d52b944702_41af4cad-e170-4f1c-aa6a-d68827a15950/p18-135-01.jpg)
