108 modeli
HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
This model snaps into the hairband, printed using small layers for the snap to be the right size and with a brim, but no supports necessary. This was really fun to design, I had to trace the arc from the band and attach the supplied snap…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps ! Two snaps attach to the upper and lower mounting points, perfectly centering…
Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…
Ever wanted to roll your backpack straps into a nice cylinder? Don't say you didn't do it as a kid. This SnapStrap simply snaps and holds your backpack strap tight so that it doesn't come loose anymore. Secondary its also really fun and…
Add multiboard compatible snaps to your openGrid board. This could be either: Adding a fill multiboard snap - Yes multiboard does fit into openGrid Adding the mid screw/push fit snap Adding the small screw snap Disclaimer: The grid size…
Just a remix for openGrid full + lite snaps with multiconnect. Revised version with the v2 directional snaps. Check out my snaps with multiconnect - no rotation: Multiconnect singlepiece snaps for openGrid - no rotation If you don't know…
This model is compatible with the lego system.
Modified the Battery Holder to Snap to a multiboard wall
Smallest possible case for the HC-SR501 PIR with snaps, mounting posts and indexing notch. Screws or tape mount to wall.
Press the Snapshot© firmly against the skin to prevent pain from a needle injection in opening of the device. Helps to reduce anxiety for kids and adults. As anyone with young children knows, the trick to a successful vaccination is…
This snaps for openGrid will allow you to attach anything using metric screws to your board. The following variations are available: M3: Snap Directional Snap Lite Snap Lite Directional Snap M4: Snap Directional Snap M5: Snap Directional…
A Multiboard dual snap that allows you to create 90° corner tile multiboards without using brackets. This minimizes filament use and space required (can be placed on tight corners, walls etc). Also keeps the tiles available for other…
This model is compatible with the lego system.
The 3D printed file is a custom attachment designed to connect a Paintball tank to an Oculus Quest 1/2 controller, allowing players to fully immerse themselves in the game Snapshot VR. The attachment is specifically designed to fit…
The default multiboard quad offset snap prints in two pieces. This prints in one, requiring no brides or supports.
Introducing the PrintCore SnapScrape. This isn’t just any old 3d printer scraper that you print, use, then throw away. This scraper has multipule features indluding, removable scraper, hook (for getting those horrible parts of filament…
This is a regular Multiboard snap with holes for various diameter 3mm thick neodymium magnets. With the standard snap the face of the magnets are 2.5mm proud of the multiboard grid. Designed for magnets that are 3mm thick, with diameters…
This model is compatible with the lego system.
What is it: It is a super slim case for the Raspberry Pi Pico W microcontroller. The case snaps together. No glue, no fasteners. The no glue part was important because at any point you may want to pop it loose of the case and put it on a…
I wanted to use the excellent miniatures from the Hellboy board game when playing TTRPGs, where it's important to track complex health and status affects for individual monsters. Since the Hellboy models don't have any unique identifiers…
Box designed by Mriamsosmrt to which I added snapping tabs to box and lid to avoid accidental card spill.
Two variants of hinges for openGrid: open-grid-snap-hinge: Useful for connecting two openGrid baseplates together. Print with support on baseplate only. opengrid-magnetic-snap-hinge: Useful for attaching an openGrid baseplate to a metal…
Description: Transform your OpenGrid panels into versatile display solutions - perfect for craft shows, pop-up shops, and home storage! These precision-designed snap-on corners let you create both 90-degree dual-panel connections and…
This model is an iteration of my original dice holder, which didn't have any locking mechanism. This model, however, includes a satisfying snap to keep the container locked and secure while in your bag! This model is not print-in-place…
My wife wanted Mickey Mouse ears, so I remixed Spider Mouse Halloween Disney Ear by Rob Skidmore with HairSnaps, The Modular Hairband by Kadows . These Mickey Mouse Spider Web ears are used with the HairSnaps modular hairband. I included…
The original snaps are quite flexible and not stable enough to be fixed with a single screw. This version has a much stronger bridge, providing enough rigidity to mount it securely with just one screw in the middle. Print settings: No…
I was on Temu the other day and found a super cute sardine tin jewelry box and thought, hey, I'd like to try to make my own! But… I didn't find out until mine was done that the Temu one was actually 3d printed from a model on Makerworld…
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. While the 2 part assembly allows using a folded screw that can be printed in a stronger orientation*, that isn't always necessary,…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Name: CocoSnap fidget clickers from Kool Fingers Video: https://youtu.be/2D1s7jOAz_Y Printing Instructions: https://koolfingers.com/3d-prints/printing-clickers/ Fidget Clickers generate excessively loud noises for their small size. They…
Fixing the biggest weakpoint of openGrid: Strength The original snap design was loose, even though it fits most daily usages, it's still loose. The directional snaps are better, but they can't handle vertical pulling force well, because…
If you need to use single multiconnect to mount something, this prevents it from rotating and also makes the connection more tight and secure overall. Check the original for more information. I just made these because I like to use single…
This is a 1/4 inch (1,4'' screw) camera mount which snaps on 2020 extrusion. Suitable for small cameras like action cameras. Feel free to use however you like and remix. Print instructions Category: 3D Printer Accessories Summary This is…
This remix is a ready-to-print assortment of hooks generated with the openGrid Snap Gadget Hook Generator . Instead of configuring one at a time, I’ve prepared a 3MF file that includes five different hook sizes, with two of each, plus 10…
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. I made these simple snaps have the multiconnect connector as part of the snap. There are 2 different snaps, one using the standard…
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
QT Py snap fit board holder component. Needs to be combined with an existing or new bottom surface in a 3d modeling program to be usable. To use in Fusion 360: Upload the .f3d file to your project. Add it as a component by dragging it…
Horror Movies - Ginger Snaps - Beast of Bailey Downs - 2000 3D printable model.
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
easy to print without supports. Use at least 2 perimeters Buy me a coffee to get rid of the last headache :-)
Horror Movies - Ginger Snaps - 2000 3D printable model.
Meet SnapShelf , the fully modular shelving system I designed to adapt to your space and creativity. Each piece simply snaps together, letting you create unique layouts that go in straight lines, curve around corners, slope up or down, or…
Quad snaps with different offsets to fit all multiboard installations.
Update : Added single-piece snaps Models using a single Multiconnect attachment point can spin freely, which is very annoying. These remixed snaps prevent that. The following variants are available: Single-piece: Lite Lite directional…
This is a collection of 6.25 mm Extended Single & Dual Offset Snaps (DS Part A) designed for you to offset mount your Multiboard grids (6.25 mm is the most current & recommended standard for Multiboard system) You can freely remix those…
Remix of the original Dual Offset Snaps to fit on the side of my table. Includes the F360 Parametric file
This part is missing for some reason from the multiboard.io site, so I built it from the default offset snaps. It has the same offset as the other VHB tape mounts (which is different from those using screws) and has the holes removed for…
For me, the wall-mountable DS Part A with a 6.25 mm offset was too flexible when used with 10×10 tiles, and the tile flex prevented some snap-in parts from being installed. So I modified the Raised DS Part A , so it can be…
This is for the big headed people like me :) Print Settings Printer Brand: Anet Printer: A8 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 20% **Filament:** Generic TPU/PLA White Notes: You may print with PLA, but it will not have…
For most Video Analog board shields you will need 5 snaps - easy to lose or break, and sometimes difficult to remove. I printed in PETG .2mm layer with a 6 layer skirt, .3 mm away from the objets - on an FLSUN V400, and no, not anywhere…
This is a simple low-poly snap with a hook to grab anything you want to organize - cables\wires, etc.
It's an amateur render of the small clip holding the side of the ASUS AP201.
A 2x4, 4x4 and 5x5 Gridfinity base that snap together for lining your drawers and other organisinal needs. Base size fits most printers. Use your favorite CAD sofware to cut to size.
Chess board with raised letter/numbers around the perimeter. The board is printed in 4 quadrants with a splice plate that overlaps the inner four corners. The perimeter also has rectangular channel for the connectors to snap into, 4 are…
SnapSlice Mini V2 is a tiny, lightweight print-in-place box opener designed to be quick and convenient to print. At just 2.31 grams, it uses very little filament and can be printed in under 8 minutes. Features: ⚖ Only 2.31 g ⏱ Under…
ive been converting models from other storage systems to openGrid recently and found that usually theres not enough space to put Multiconnect slots in and ive had subpar results printing openGrid snaps vertically. we can sidestep these…
If you need more variants feel free to ask in the comments, or here is a lose step by step on how I did it in Fusion 360. I've also provided the Fusion archive among the files. Download and open the STEP file you wish to modify from the…
SnapShell is a modular, 3D-printed backplate designed for the CMF Phone 2 Pro, offering both style, strength and unmatched flexibility. It features a sleek, minimal design that looks great even without attachments. But when needed, its…
Glas is variable here: https://www.ikea.com/de/de/p/pokal-schnapsglas-klarglas-90091996/ https://www.ikea.com/us/en/p/pokal-snaps-glass-clear-glass-90091996/ You can reduce infill to 10% and reduce wall thickness for a faster print
A remix of jh131263's excellent Mavic Controller attachment. Added female snap inserts for the DJI Mavic Combo official bag strap. Blender'd a male-male snap. Category: Gadgets
Really liked the functional design of GOEWS. And the look of HWS. So I made a two color version of GOEWS. Also added edges Added snaps so the pieces can be connected together to ease mounting The .3mf file contains the 5x6 tile with…
Will report back with a usage report - So far all seems solid enough and loud enough at low speed. When the rev's are up the exhaust takes over anyway!
Adapt the adapter with an adapter
This model is compatible with the lego system.
For quite some time i was inspired by archimedic and solids and I created them in the past. But when I lately found out, that Mathgrrl has snaps without axles, my fascination was revived. However her idea did not fully match my…
2026-10-04 added a 10 layer wall thick 3mf of the ratchet key for stand-alone printing. I had several of the weaker keys fail, so this one is a little more reliable. 2026-06-21 added improved version: Locking key now stays in place…
Simple 120mm Computer Fans holder for Multiboard with Tight Snaps
For when whatever you're attaching to openGrid using the metric screw snaps doesn't have holes spaced at a perfect multiple of 28mm.
The Treat cam is relatively easy to print and set up, it uses a button system and takes a quick photo of your best friend before rewarding them with their favorite treat. The duration between dispensing can be changed via Arduino code…
SUMMARY I was looking for a pen holder for my multiboard. Although I really liked a model I saw on Tingiverse, designed by "Jimbo Jones," I realized the mounting brackets were too difficult for multiboard installation, so I redesigned the…
This model is compatible with the lego system.
I didn't find such a part, so I upgraded it myself. They were very weak from the developer, they were constantly breaking, even during the build. Replaced everything with these Printing instructions: Use 3 perimeter wall thickness, 0.2 mm…
Introduction This model is a redesign of my keychain flashlight assembly, based on feedback and assembly observations. The assembly process required tools, sometimes insulating tape, and a non-intuitive assembly process. Recommended print…
This is a simple magnetic mount for 10mm ESD snap connectors that are commonly used around electronics workstations, including ESD mats, wrist straps, and grounding cords. I wanted a magnetic mount that would allow me to connect an ESD…
See https://makeanything.design/polypanels/
Simple SO-DIMM RAMs holder for Multiboard with Tight Snaps
Just a simple two piece fruit fly trap. Fill it with apple cider vinegar and a drop of soap, as they say, or whatever you wanna put in it to catch the flies
Inspired the collectible toys Tazos ( https://en.wikipedia.org/wiki/Tazos ) that I had during my childhood I've built this extremely simple construction system, that I called YUS (Yet Unamed Snaps). Theses collectible toys were simple…
These functional button snaps are designed for printing on any FDM printer capable of TPU 95A filament with the default settings. Rubber-like materials with similar shore hardness will work on resin printers, but more force is required…
I use the tree supports to the build plate only and print at 25% infill for strength. You will have to download the Multiboard snap from the Multiboard website.
First of all thanks to @kadows for their HairSnaps hairband design. Print Guide First download and print the hairband by @kadows in the appropriate color. Then you can take either of my snap designs/remixes, print and attach it to the…
Small wall mounted display stand used to showcase a Funko pop or other small item. The riser is printed horizontally, separate from the base, and snaps in. This eliminates weaker layer adhesion issues when printed upright. Two round…
Your school schedule just got a 3D upgrade. Instead of printing a new timetable every time something changes, simply swap the tiles. SnapSchedule is a reusable 3D-printed weekly timetable with interchangeable pieces for days, times, and…
Tired of the pantry chaos or workshop clutter? Meet the SnapStack FIFO Jar Organizer —a modular, snap-fit system designed to store and dispense 70mm x 90mm jars with First-In-First-Out logic. Just snap new jars in on one side, and the…
I made this for my wife's shaver, because none of the other solutions worked, and there was no other good way to store it. Simply snaps onto wire. Our basket's wire is 4mm thick, but I can adapt this to other thicknesses easily.
Curtain Rod holder for 16mm curtain rod. Rod snaps in. Added adapter for 13mm extension if needed.
First of all thanks to @kadows for their HairSnaps hairband design. Printing guide Print the hairband by @kadows. Then print my inverted cross snap design. All in black. Obviously. Attach together and enjoy (use glue if needed).
Introducing the SnapStand for Qi2 charging (left in pics) similar to Google's PixelSnap Stand for a fraction of the price. It's also compatible with non-Qi2 phones (that don't have magnets). The throwback design to the original Pixel…
A revision of https://www.printables.com/model/832708-conways-game-of-life-still-life-tiles using hidden snaps instead of jigsaw like fittings. These 19 tiles (with alternates) fit together like a puzzle, but the only way to complete it…
Insert for the original Expeditions organizer. It goes in the same slot as one of the mechs and has slots to hold base.
Why haven't i had this idea earlier? I swear i could not find a single good sharpening product made specifically for bread knives. Even the serration sharpening rods are too slim and only grind the center of a tooth at the correct angle.…
The Physics of Attraction, 3D Printed. HeartSnaps are flexible TPU clips that use magnetism to bundle your cables, hold notes on the fridge, seal snack bags, and hold things together. Designed with TPU in mind for the hinge, the two…
This is your portable "flyfishing" kit - literally a kit that allows you to fish a fly. The gear will equip you to capture a fly alive and store it in a tiny bottle for later handling, with ease and convenience, even hygienically. Preview…
OpenGrid Snap Puller T-handle that pulls stuck snaps out of the tile A one-piece tool for removing openGrid snaps (the threaded squares that press into the grid). It screws into the snap's own thread, so you get a proper handle to pull on…
SnapSpace ist ein modularer Organizer zur besseren Raumnutzung im Eingangsbereich, auf dem Schreibtisch oder in anderen Bereichen. Die Konstruktion ermöglicht das platzsparende Verstauen kleiner Gegenstände wie Schlüssel, Stifte, Notizen…
Die Metallklinge ist nicht 3D-gedruckt und muss separat erworben werden. Überprüfen Sie die Kompatibilität mit dem Modell vor der Montage und prüfen Sie die Funktion des
A Multiboard dual snap that allows you to create 90° corner tile multiboards without using brackets. This minimizes filament use and space required (can be placed on tight corners, walls etc). Also keeps the tiles available for other…
![Pi PICO-W Slim Case [SNAPS TOGETHER - no glue] (with and without headers)](https://media.printables.com/media/prints/385457/images/3229748_ab46d5e6-982d-4b10-a173-4fe5264d163a/2.png)
