Wyniki wyszukiwania: sodas

Sortowanie

498 modeli

P
PrintablesLuis

SodaStream bottle stand / SodaStream Trockengestell

***Update*** I have uploaded versions with a smaller overall diameter. I have a SodaStream Duo and it came with one plastic bottle and one glass bottle. I wanted to have a stand for them to let them dry upside down. So I did some changes…

Pobrania
1825
Polubienia
209
Ocena
4,91
P
PrintablesCurlyVole

Stackable SodaStream Bottle Drying Stand

This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…

Pobrania
1744
Polubienia
191
Ocena
4,92
P
PrintablesPeter

Sodastream Bottle Drip Snout

Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…

Pobrania
1283
Polubienia
220
Ocena
4,97
P
PrintablesKryštof

Sodastream Bottle Cap

A model of a standard, easy-to-print SodaStream cap. I didn't use supports, but if you don't mind taking them off, print quality could be better with them. There are two ways to print this model. One is to print out the complete cap in…

Pobrania
1204
Polubienia
114
Ocena
4,67
P
PrintablesRi3del

SodaStream glas bottle stand

SodaStream Glasflaschenständer zum trocknen

Pobrania
1179
Polubienia
193
Ocena
4,88
P
Printableselbflip

Sodastream Bottle Holder

This is a bottle holder for our Sodastream. For licensing reasons, I published this model without the Sodastream logo. There are two different versions of the lid. Once for the 1 liter glass bottles and once for the 0.75 liter glass…

Pobrania
658
Polubienia
83
Ocena
4,75
P
Printablesjdj

Sodastream holder for Cornelius kegs

Do you use a Sodastream tube to carbonize/pressurize your precious brews in Cornelius kegs? Have you (like me) found it a bit cumbersome moving a keg around with its Sodastream tube attached? Or just finding somewhere to put the…

Pobrania
503
Polubienia
35
Ocena
0
P
PrintablesTom

SodaStream Crystal Bottle Drip Stand

...not really a "source file" remix but a reinterpretation of the basic design done from scratch in FreeCAD with some refined edge chamfers - parametric *.FCStd file is included Dimensions are fitted to the much more chunky SodaStream…

Pobrania
458
Polubienia
48
Ocena
5
P
PrintablesFredslund

SodaStream Glass Bottle Holder

When washing your sodastream glass bottles, leave them to dry in this holder, which fits both the bottle and the lid. Furthermore it features a removeable dripping tray. Print instructions Models These models can all be printed in any…

Pobrania
431
Polubienia
72
Ocena
5
P
Printablesrolleroll

Sodastream Halter für Glasflaschen // Sodastream holder for glass bottles

Sodastream Halter für Glasflaschen zum austrocknen. stabil / Standfestigkeit hoch / schlichtes Design Sodastream holder for glass bottles to dry out. stable / Stability high / simple design Print instructions Printer brand: Prusa Printer:…

Pobrania
430
Polubienia
41
Ocena
4,91
P
PrintablesZkaza

SodaStream Bottle Cap with Handle

A SodaStream Bottle Cap with a nice design and handle. 0,20mm Resolution, Support on the built plate only, infill 20%. PLA. Used Creality Ender 3 Pro.

Pobrania
409
Polubienia
92
Ocena
4,5
P
Printablesastrophage

SodaStream Bottle Base

I dropped my 1L Soda Steam Slim Bottle a couple times the and the bottom plastic base broke so I modeled a replacement. Just put a little hot glue in the bottom and boom…back in business. This model is designed to print with no supports.…

Pobrania
350
Polubienia
34
Ocena
5
P
PrintablesMartinD

Sodastream bottle adapter V2 (DUO) for standard 0,5 liter pet-bottles

Make your sodawater with a 0,5 liter pet bottle, like coke, fanta,… Works on Sodastream DUO, EASY, TERRA, ART, POWER and JET which uses normally 1 Liter Sodastream PET-Bottles Older Systems like COOL,.. have shorter bottles, for that you…

Pobrania
322
Polubienia
42
Ocena
5
P
PrintablesFabaya

Sodastream Abtropfhalter - glass carafes drip holder

The sturdy, stylish drip holder for glass carafes (Sodasystream Crystal) and plastic bottles brings order to your kitchen! The design makes it easy to put the glass carafes and lids in the holder. Der robuste stylische Abtropfhalter für…

Pobrania
302
Polubienia
41
Ocena
4,6
P
Printabless17s05

SodaStream CO2 cylinder wall mount for kitchen cabinets

This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…

Pobrania
268
Polubienia
99
Ocena
5
P
Printablesamazing

Bottle Drying Stand for SodaStream Crystal

Inspired by https://www.thingiverse.com/thing:4602157 I created my own bottle stand for drying (and storing) SodaStream Crystal glas bottles. Important for me was a secure stand (the bottle does not tilt or touch other bottles with two…

Pobrania
242
Polubienia
24
Ocena
5
P
PrintablesBTuck

SodaStream replacement button

The injection molded plastic push button on the top of my SodaStream broke in half. I made this simple replacement (V2) as a temporary fix until I could buy a replacement button. I printed it with Translucent Blue PETG so it would be…

Pobrania
192
Polubienia
9
Ocena
4
P
Printablesthomers

Sodastream Gas Bottle Holder

I printed mine using a 0.8mm nozzle and 0.4mm layer height and no supports at all, which seems to come out just fine. As you can see, there are some bridges that would probably be of better quality when using supports. I don't care about…

Pobrania
187
Polubienia
39
Ocena
5
P
Printablesmp42

Sodastream / Wassermax bottle stand

Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles. Print with standard settings in PLA or PETG

Pobrania
110
Polubienia
15
Ocena
4,67
P
PrintablesRM

Sodastream Penguin Untersetzer

Untersetzer für den Sodastream Penguin damit das überlaufende Wasser nicht immer auf der Arbeitsfläche landet.

Pobrania
38
Polubienia
0
Ocena
0
P
PrintablesStephen J

Compact SodaStream Bottle Stand

Simple 2-part sodastream bottle stand that assembles for use, and disassembles afterwards in seconds for space-saving flat storage in a drawer (or similar). Printing: Material - anything you like really - not important. Silk PLA pictured…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesDamián Sládek

Sodastream bottle holder

Recommend printing in waterproof PETG :)

Pobrania
21
Polubienia
2
Ocena
0
P
Printablesbuchnema

SodaStream Duo Plastic Bottle Stand

I was annoyed that our empty plastic water bottles always topple over when we open the kitchen drawer. So I made this holder which keeps up to three bottles in its place. Although this minimalistic design looks quite fragile, it is…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesKraemer

UKEG 64 and SodaStream base

Use a SodaStream CO2 60L refill canister. You must purchase the ball lock cap separately. I like to use this set-up to force carbonate and serve Hop Water. SodaStream regulator: Sodastream compatible 0-30 PSI Mini Regulator…

Pobrania
16
Polubienia
5
Ocena
0
P
PrintablesFeirno

Simple Biohazard Tag 4 sodastram bottle

Simple Biohazard Tag 4 Sodastream Glas Bottles (I can edit 4 custom tags)

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesMartinD

Sodastream bottle adapter V1 for standard 0,5 liter pet-bottles

For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…

Pobrania
3016
Polubienia
440
Ocena
4,95
P
PrintablesPeter Sutter

SodaStream Replacement Nut

Simple and easy to print replacement-nut for the pressure hose of the SodaStream Crystal 1.0 and 2.0 and SodaStream Jet. If you have the option, select the "Nut.stl" file. The other file, "Nut_Co2_side_slim.stl", is designed for the side…

Pobrania
1814
Polubienia
69
Ocena
4,91
P
Printablesfirstgizmo

Sodastream bottle caps

Features: Prints in one part Fits on glass bottles (Sodastream crystal) Fits on plastic bottles Easy on your printer Many different designs to choose from Printing: Choose the design you desire for your bottle type and print it with at…

Pobrania
1504
Polubienia
130
Ocena
5
P
PrintablesMaRi

Sodastream CO2 bottle stand

I designed this to keep the CO2 bottle for my budget aquarium C02 fertilizing from tipping over. Fits an 425g C02/60 Liter/ 60mm diameter CO2 bottle Print instructions Used PLA, 0.3mm Layers

Pobrania
1471
Polubienia
122
Ocena
5
P
Printablespottedmeat7

SodaStream Nut

This is the nut that connects the little black CO2 hose, the hose has to be pushed through the slot in the nut. Printed with PLATech for strength. No supports needed Print instructions Category: Replacement Parts

Pobrania
1394
Polubienia
35
Ocena
4
P
Printableshallonhatt

SodaStream adapter with a grip

An adapter to use soda bottles (European?) with your SodaStream machine. This adapter fits the older style of SodaStream threads (pre 2018?). What differs this from the others here on Thingiverse is the grip on this adapter to remove it…

Pobrania
1032
Polubienia
74
Ocena
4
P
PrintablesGoutMayo

Adaptateur Sodastream

Un adaptateur pour les bouteilles sodastream en verre (Crystal) Bitcoin : 1DdrhYUJKzw3iEnvEhfff3Fox8DJin94F3

Pobrania
777
Polubienia
73
Ocena
4,83
P
PrintablesMario

Sodastream CO2 cylinder holder

Hello together, Who doesn't know the struggle with CO2 cylinders lying somewhere around in a cabinet taking up a lot of space? Therefore i designed a small bracket to screw into the cabinet. Depends on the bracket you need, it can hold…

Pobrania
628
Polubienia
101
Ocena
4,93
P
Printablesochm

Release Lever for "SodaStream EASY" - indestructible

I made some modification of model by dede67, his model has the same thin walls like original (which is originaly made from ABS), such thin walls is is easy to crack (around the holes). My remix add some material around the holes and the…

Pobrania
608
Polubienia
26
Ocena
5
P
Printablessimon

Sodastream Drip Cradle

Buy me a coffee, if you want :) Introducing the Sodastream Drip Cradle – the ultimate accessory for your Sodastream experience. Crafted with precision and care, the Drip Cradle is not just a holder, it’s a statement of efficiency and…

Pobrania
604
Polubienia
61
Ocena
5
P
PrintablesIvan Urbánek

Sodastream JET replacement part

The CO2 bottle fixing block in my Sodastream carbonator broke, so I decided to make one myself. Updates: 15.4.2024 - Second one lasted again roughly a year. PLA might not be the best material. Try to use PETG or even better PC or Nylon…

Pobrania
592
Polubienia
29
Ocena
4
P
Printablespatshead

Quickconnect Adapter for SodaStream Terra

This is a 3D printed adapter designed by my friend Alex Courville to connect old Sodastream CO2 tanks or the Sodastream bulk CO2 fitting to the latest style Sodastream machines. O-rings are available in my Tindie store . You can see see…

Pobrania
586
Polubienia
26
Ocena
0
P
PrintablesBmauro

Lever button for Sodastream Spirit

PLA, 0.2mm resolution, 20% Infill. With Support. Interface pattern spacing 1mm, xy-separation 100%

Pobrania
582
Polubienia
21
Ocena
5
P
Printableselatobi

SodaStream CO2-Tube-Nut

A Nut to replace the original SodaStream Nut wich is pressing the Tube in the bottle head. The broken “old” nut can stay on the black tube. printed in PLA with a layer hight of 0,2mm

Pobrania
533
Polubienia
29
Ocena
5
P
PrintablesEitoku

Sodastream bottle stand

A simple stand for two SodaStream bottles and caps. It can be placed next to the soda stream to dry washed bottles. The bottom tray is rimmed to keep water from running off the table. I made this with PETG filament, but PLA would also work.

Pobrania
504
Polubienia
49
Ocena
5
P
PrintablesSchwiftyProps

Sodastream Fizzi Button Replacement

Print sideways as shown for tensile strength. Add a 30mm M3 bolt and a square (hex works) nut. Some support needed between the holes but not much for easy removal.

Pobrania
484
Polubienia
32
Ocena
5
P
PrintablesStefan

Sodastream bottle holder

I designed this holder for a aquarium co2 dispenser.

Pobrania
481
Polubienia
42
Ocena
5
P
Printablescellarnerd

Corny keg holder for Sodastream bottles with larger hole

With this printed I can safely and securely attach my Sodastream CO2-bottle and the regulator to my Cornelius keg in my kegerator, making sure the bottle doesn't fall over and my beer isn't flat when I want to pour a pint. A remix of the…

Pobrania
475
Polubienia
35
Ocena
5
P
PrintablesKrohm Koala

Sodastream bottle stand

Based on a bottle cap and inspired by a bottle stand, i needed more than an only one bottle stand, so i designed this and remodel all the thing with more bottle space and my own design. CAUTION: The 3 and 6 bottles models need a print bed…

Pobrania
427
Polubienia
44
Ocena
5
P
PrintablesOggy

Sodastream Flaschenhalter

Halterung von Sodastream Crystal Glasflaschen. Zum trocknen nach dem Spühlvorgang und zum aufbewahren der Flaschen. Der Halter wurde mit einer 0,2 Nozzel und mit einer Schichthöhe von 0,2 mm gedruckt. Das Infill beträgt nur 5%, dadurch…

Pobrania
420
Polubienia
45
Ocena
5
P
Printablesra100

Sodastream Jet Button

Modified for Sodastream JET (https://www.amazon.com/dp/B07Q3966XW/ref=dp_cerb_1) Made the lever longer. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 10% Gyroid Filament:…

Pobrania
399
Polubienia
22
Ocena
5
P
Printablestrumpfi

Sodastream Crystal to Plastic Club Adapter (Glass Bottle to Plastic)

Adapter to use the glass bottles "Sodastream Crystal" with Sodastream carbonators which normal use plastic bottles with thread. Remix with easier handling. Printing is a bit tricky, use supports Print instructions Category: Kitchen &…

Pobrania
384
Polubienia
35
Ocena
0
P
Printableswuerfel

Sodastream glass bottle holder

This is a simple bottle holder for sodastream glass bottles and the lid. There is a small gap underneath the opening to let the bottle drain water from washing and let it dry. Prints sideways in one piece with minimal supports.

Pobrania
361
Polubienia
31
Ocena
5
P
PrintablesTom0285

Sodastream Cristal to Duo Adapter

Unfortunately, the Sodastream Cristal bottles are not compatible with the Duo. With this adapter, the Cristal bottles can also be used with the Duo. The short adapter can remain in the soda stream if only Cristal bottles are used. The…

Pobrania
355
Polubienia
32
Ocena
5

Sodastream Stand

A twisted stand for drying the Sodastream glass bottle. Designed in Fusion360 and printed with PLA Black without any supports.

Pobrania
354
Polubienia
31
Ocena
5
P
PrintablesBengineer

SodaStream Cap Dispenser

This is a storage and dispenser for SodaStream PET caps. it holds up to 7 caps at once and prints without supports. The caps can singly removed on the bottom. UPDATES: 2021-02-14 Added version for Crome Bottle caps as requested by…

Pobrania
353
Polubienia
90
Ocena
4,91
P
Printableslachtan86

SodaStream Terra / Duo to PET bottle adapter

Hey Printers, this is an adapter that connects a standard PET bottle to SodaStream Terra, working with the SodaStream Duo maybe - please give me feedback in the comments. If you would like to support my designs to give me a small tip,…

Pobrania
353
Polubienia
33
Ocena
5
P
PrintablesBengineer

SodaStream Bird Feeder with Roof

The design of this bird feeder is based of the design from Gavin Kennedy. It uses an old SodaStream PET bottle instead of the soda bottle. In addition I have designed a roof to fit the outer diameter of the bottle. The segments of the…

Pobrania
351
Polubienia
86
Ocena
5
P
PrintablesRawlus

Sodastream Water Bottle Sprinkler Head and plant watering adapter

Origin My household uses a lot of Sodastream water and we have a fairly large collection of these clear polycarbonate bottles acquired over time, but as they age the “expire” and can be unsafe for pressurized use. Design Parts: Solid cap…

Pobrania
342
Polubienia
42
Ocena
0
P
PrintablesJack

SodaStream replacement CO2 nut

WARNING CO₂ is under pressure! THIS MUST BE USED ONLY WITH SAFTEY VALVES IN PLACE This still may explode or break - be prepared Be careful Cover with towel when testing Wear eye protection Print slow with 10 perimeter/walls Use PCT, PC or…

Pobrania
329
Polubienia
21
Ocena
5
P
PrintablesMB

Schraubverschluss (screw cap) für Sodastream Crystal Glasflasche

Der Verschluss kann als Ersatz für den Original Verschluss eingesetzt werden. Er ist dabei recht griffig und gut zu drehen. Es wird empfohlen, ihn in PETG, ABS oder ASA zu drucken, da PLA die Spülmaschine nicht übersteht. Zusätzlich wird…

Pobrania
322
Polubienia
31
Ocena
5
P
Printablesamirchen

SodaStream container holder

print with PLA at 0.2 LH

Pobrania
321
Polubienia
91
Ocena
5
P
PrintablesMape

Sodastream to normal soda bottle adapter

This adapter makes it possible to connect standard soda bottles directly to Sodastream carbonator. Use a seal from a normal bottle cap, an o-ring or something else to properly seal the soda bottle properly to the adapter. Model is made…

Pobrania
321
Polubienia
44
Ocena
5
P
Printablesarminth

Adapter Sodastream Crystal glass bottle to Sodastream easy

Safety advise: use at your own risk! Don't use without a gasket! Remix from https://www.thingiverse.com/thing:3404200 This adapter let's you use crystal glass bottles in the sodastream easy. You need an O-ring - or even better an original…

Pobrania
309
Polubienia
21
Ocena
5
P
PrintablesOcinHonig

Sodastream Crystal Duo Adapter

A insert to use crystal bottles with the sodastream duo. I added a hole to easily remove the adapter when you want to use other bottles. + I removed the sharp edge.

Pobrania
303
Polubienia
19
Ocena
5
P
PrintablesArctic

Sodastream bottle cap thread

I want to make some projects in the future with old Sodastream bottles so I derived part of found model to be my universal start point and I think it could help others, too!

Pobrania
298
Polubienia
20
Ocena
5
P
PrintablesSebash

Sodastream Duo Bottle Holder Dishwasher

Note: the holder works fine but after a few runs the used PETG has deformed. I used the Auto program on the dishwasher which should not exceed 60 degrees Celsius but together with the mechanic force it will not persist. I am looking out…

Pobrania
289
Polubienia
40
Ocena
0
P
PrintablesGoutMayo

Egouttoir Sodastream

Egoutoire pour bouteille sodastream x4 Bitcoin : 1DdrhYUJKzw3iEnvEhfff3Fox8DJin94F3

Pobrania
277
Polubienia
37
Ocena
4
P
Printablesmitfasos

Sodastream pump release lever

I tried to make an exact copy of the release lever for the sodastream pump. Minor simplifications were made for the cost of using more material. The model seems to fit very well and works properly. However, strengthening of the sides…

Pobrania
266
Polubienia
18
Ocena
5
P
PrintablesSchuMaker

Sodastream CO2 Cylinder Support

Support for CO2 Cylinder for Sodastream or similar. The "Bottom" part is minimal conic, so the Cylinder is stored safely

Pobrania
257
Polubienia
47
Ocena
5
P
PrintablesJan Tomášek

SodaStream JET Button (No Supports)

Remix for no supports print. Replacement part for broken push button on the SodaStream JET.

Pobrania
246
Polubienia
12
Ocena
5
P
PrintablesBengineer

SodaStream Funnel (screw on)

This is a screw on funnel for PET soda stream bottles. Presses snugly against the top of the opening with no gap. Designed to print without supports. 2020-10-13 Update: Added Step Files for the Funnel and only the thread.

Pobrania
239
Polubienia
32
Ocena
5
P
PrintablesFredster

SodaStream C02 Cap with Thread

This is a screwable cap for the SodaStream C02 Cylinder

Pobrania
238
Polubienia
13
Ocena
5
P
Printablesdavidpadbury

SodaStream Bottle Rack (x5 and x3)

We drink a ton of sparkling water so make up a bunch of SodaStream bottles then leave them in the fridge to chill. We used a clumsy bottle rack to stack them horizontally on a shelf but they'd frequently fall off and it was quite…

Pobrania
236
Polubienia
49
Ocena
5
P
PrintablesBengineer

SodaStream Dryer Stand Foldable

This is inspired by Steffan Krautzs SodaStream Rocket Dryer. https://www.thingiverse.com/thing:809870 Its a really useful kitchen tool to dry out the SodaStream PET bottles after washing. To make the stand more compact for store, I have…

Pobrania
235
Polubienia
57
Ocena
4,38
P
PrintablesUko

SodaStream Minimalistic Funnel

There are some cases when it's hard to pour a liquid into a standard plastic SodaStream bottle without spilling. For example, if you are pouring water from a Brita filter, or juice from a screw-top carton box. This funnel is designed to…

Pobrania
231
Polubienia
25
Ocena
5
P
PrintablesSandwich

Sodastream drip holder

drip holder for the soda stream crsytal bottles. it can hold the bottle an the cap. It should work für other bottles. The tray can be easyly replaced, so you can clean it.

Pobrania
231
Polubienia
29
Ocena
5
P
PrintablesPhilip

Sodastream CO2 Gasbottle holder

You only will need some M3x40 screws.

Pobrania
230
Polubienia
55
Ocena
5
P
PrintablesLegojeff

Sodastream Spirit press button fix - Updated

Here is a fixing solution to the press button of a Sodastream Spirit machine that broke. This part is quick to print (less than 30 min) with a minimum support. It helps to maintain in place the broken original piece. You can glue it also,…

Pobrania
230
Polubienia
7
Ocena
3
P
Printablesgglockner

SodaStream Carbonator Storage

Store 8 SodaStream 60L carbonators. Works great to transport them to your store for exchange. Designed to fit the print bed of a Prusa i3. I used PETG but it should be fine to use PLA. For faster printing, use a 0.6mm nozzle and 0.3mm…

Pobrania
229
Polubienia
34
Ocena
5
P
Printablesmape

Kegland Oxebar keg stand including a SodaStream mount

This is a stand for a Kegland Oxebar keg (4l and 8l version) with a SodaStream mount. Puts together a Oxebar keg and a SodaStream cylinder into a nice package so it can't fall over (especially for the 8l version). If you use a mini…

Pobrania
227
Polubienia
12
Ocena
5
P
PrintablesMaddin

Sodastream Duo Drip Off Glass Bottle

Most of the exisiting dripoffs for 3D printing did not fit for SodaStream Duo glass bottles, so I designed this one. @OliWee_1551265 made a wallmount for this dripoff, take a look at Sodastream Duo Drip Off Glass Bottle Wallmount .

Pobrania
227
Polubienia
28
Ocena
4,92
P
Printablesakastura

Sodastream bottle cap v1

Sodastream bottle cap. Use the gasket

Pobrania
226
Polubienia
23
Ocena
5
P
PrintablesNoreva

Sodastream Glasbottle Drip Cradle

Changed design for the shown bottles.

Pobrania
226
Polubienia
18
Ocena
0
P
PrintablesSpongebob

Sodastream Jet Button (no support)

This is a remix of https://www.printables.com/model/300630-sodastream-jet-button/ where I removed the fin on the button

Pobrania
222
Polubienia
9
Ocena
5
P
PrintablesAK

Trichter mit Gewinde für Sodastream Flaschen / Funnel with thread for soda stream bottles

Dieser Trichter mit Gewinde passt auf Sodastream-Flaschen. Wir nutzen eine alte Flasche als Behälter für das Geschirrspülmittel und verwenden den Trichter zum Nachfüllen der Flasche. This funnel with thread fits sodastream bottles. We use…

Pobrania
220
Polubienia
35
Ocena
5
P
Printablesronbot77

Bottle Rack parametric for Sigg, SodaStream e.a.

PLA or PETG can be used 0.2 mm layer height 0.4 mm nozzle

Pobrania
206
Polubienia
82
Ocena
0
P
PrintablesDaDaniel

SodaStream DUO bottle stand

A double bottle stand for the sodastream DUO bottles. Glass bottles and plastic bottles fit into the rack and the caps can be inserted. There is also a drip tray if the stand cannot be placed at the sink. Printed on a MK3s with PLA in…

Pobrania
204
Polubienia
14
Ocena
0
P
Printablesdswinton

Sodastream Syrup Plates

Do you live in absolute filth? Does the state of your pantry walk a fine line between something you're just quietly ashamed of, and a genuine hazard to your families health? Mine too! This model takes you just one tiny step further away…

Pobrania
203
Polubienia
44
Ocena
5
P
PrintablesChris vK

Sodastream Easy - repair

My sodastream got broke... i think this might be the most frequent reason. You can find this problem with the broken plate for the locking pin, everywhere in the internet. Ok... got a printer, so i can print a new lever... but why…

Pobrania
195
Polubienia
15
Ocena
4,86
P
Printablescomanda

SodaStream Duo Sprudler-Hülse / Carbonator-Sleeve

Mir ist bei der Reinigung des SodaStream leider die Hülse kaputt gebrochen. Auf Nachfrage beim Hersteller, teilte man mir mit, dass es das Teil nicht einzeln zu erwerben gibt. Unfortunately, the sleeve broke while cleaning my SodaStream.…

Pobrania
189
Polubienia
6
Ocena
5
P
PrintablesEvilknievel

Sodastream Co2 Bottle Rack

Its a little Rack for 3 co2 Bottles Sodastream

Pobrania
186
Polubienia
25
Ocena
5
P
PrintablesShigrath

Water Bottle Dryer (Sodastream Glass Bottle Remix)

This is a slight remix of ShaneF12's file to specificly fit Sodastream Glass Bottles, who have a smaller hole but still require a strong base since they are heavier and have a bigger bottom. The new tip is 2,4 mm wide. I recommend…

Pobrania
183
Polubienia
24
Ocena
5
P
PrintablesMalte Makes

SodaStream Glass Bottle Stand (3D Print optimized)

This is a stand for the Glass Bottles from the Sodastream. Water can escape easily, nothing goes inside the bottle, ensuring maximal airflow. Water droplets will vaporize on the bottom and not go over the small border. Please leave a Make…

Pobrania
177
Polubienia
53
Ocena
5
P
PrintablesTobias M

Sodastream Bottle Stand

Just a simple Sodastream Bottle Stand with a width of 10 cm. Works with the plastic bottles. Didn't tested it with the glass bottles. Printed with 20% infill at my Ender 3. Uploaded the same at Thingiverse:…

Pobrania
171
Polubienia
20
Ocena
5
P
PrintablesJack

DryIce maker - Sodastream CO₂ cylinder

Potential Danger! CO₂ is under 57bar pressure ( 5.7 MPa). So be aware this is not a toy - wear protection glasses and gloves. Dry Ice is very cold -78°C ( - 108° F ) direct contact can lead to severe burns. Print with lot infill and…

Pobrania
170
Polubienia
34
Ocena
5
P
PrintablesCitruspers

Sodastream Jet Drip Tray

Why My colleague lost the drip tray to his Sodastream Jet machine, which was rather inconvenient. I was able to get a hold of a spare one and modeled a replacement that's tested and fits. Features Tested to fit Sodastream Jet machine…

Pobrania
168
Polubienia
8
Ocena
5
P
PrintablesMatze

Sodastream Deckel mit Symbolen

Da wir mit einigen Sirups gleichzeitig arbeiten und hier manchmal Verwirrung über den Inhalt der Flasche entsteht, habe ich die Vorlage von Kryštof um die bei uns am häufigsten verwendete Symbole erweitert. Der Dichtungsring ist direkt…

Pobrania
168
Polubienia
2
Ocena
0
P
Printablestraweg

SodaStream Bottle Dryer (stackable) - remix

just a small step for a designer - one giant change for mankind :) But the real oscar goes to: https://www.thingiverse.com/devstroyer/designs for the basic design ( https://www.thingiverse.com/thing:3657011 ) I love it - thank you ! I…

Pobrania
162
Polubienia
18
Ocena
5
P
PrintablesJack

Sodastream bottle dry stand

small secure screw on ring to dry Sodastream glas bottles (crystal / Glaskaraffe ) upside down - single dry rack

Pobrania
160
Polubienia
35
Ocena
5
P
Printableselatobi

CO2 Bottel Rack (SodaStream)

A modular rack for the CO2 cylinder, to store them more efficient in the shelf. The rack fits perfectly on the IKEA Hejne shelf. The parts are screwed together with M3x16 Screws. The connectors are unthreaded and the Screws are screwed…

Pobrania
158
Polubienia
64
Ocena
4,71
P
PrintablesAlexMu

seal for Sodastream® or other sparkling water maker bottles

chamfer on bottom to compensate elephant foot 3 perimeters line width 0.45 0.2mm layer height TPU flex material 0.8mm top/bottom tickness hide seam no retraction top pattern: concentric

Pobrania
157
Polubienia
22
Ocena
5
P
PrintablesBengineer

SodaStream Dryer Stand Foldable

This is inspired by Steffan Krautzs SodaStream Rocket Dryer. Its a really useful kitchen tool to dry out the SodaStream PET bottles after washing. To make the stand more compact for store, i have made two of the legs foldable The design…

Pobrania
157
Polubienia
37
Ocena
4,75
P
PrintablesPhilip

Sodastream CO2 Gasbottle Holder 2nd Edition

The first gasbottleholder needs screws. This version is slightly different and do not need screws. Some bolts holds everything in place. If you feel better, you can glue them together.

Pobrania
156
Polubienia
18
Ocena
4,67
P
Printablesbzioo

Sodastream Flat Syrup Bottle Tray

Neat little Sodastream syrup bottle tray Also compatible with YO syrup bottles

Pobrania
151
Polubienia
29
Ocena
5