Minnesota Vikings Logo
Minnesota Vikings Logo 1st Layer Yellow 2nd White 3rd Purple
- Pobrania
- 504
- Polubienia
- 74
- Ocena
- 0
163 modeli
Minnesota Vikings Logo 1st Layer Yellow 2nd White 3rd Purple
This is my take on the mn rebel alliance. There are lots of similar models and logos out there. I wanted bigger laser eyes and the North Star so I used tinkercad and used some .svg files created in vcs. I attached the .stl for those of us…
Skol Vikings! The Norseman's eye is not connected to anything so it won't be attached Category: Art
Logo of the American Football Team Minnesota Vikings
Minnesota Mosquito. G-code used .6 nozzle and fills up the entire plate. (Included organic supports)
Minnesota Timberwolves NBA Basketball Team Logo
Minnesota, USA (MN) Topographic Relief Map with Rivers and Coastal Waters Minnesota, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
I don't have any attachment to the Minnesota Vikings other than being disappointed with Daunte Culpepper 20+ years ago when he was on my fantasy team ;P, but I was asked to make this. So here's a Vikings coaster. There are 2 versions. V1…
!! Every parts doesn't need any supports !! Please check the laydown directions below this page(quite important) Also there is the assemble guide in text below (and the video comming soon) You should print like below : Black - eye x2 Gold…
Minnesota Wild Hockey Logo. This MN Wild logo prints quickley and easily without any supports necessary.
black base layers change to red at layer 7 change to blue at layer 9
the Chat-To Antenna from the word “castle” due to the design shape this is my version of the famous vertical “manpack” antenna. i had to buy alot of stuff and the total cost is almost the same as the commercially available Chinese version…
Here is the awesome looking Minnesota Vikings Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Material FT114-43 RINGKERN ca 1,5m Kupferlackdraht 0,7mm 100pF/500V Kondensator an der Speisung BNC-Buchse 20,2m Draht 0,25mm² div. Schrauben Der Print ist eine Antennenspule mit einem 64:1 Ringkern (FT114-43) in der Mitte verbaut. Beim…
Minnesota Vikings light switch cover
A 100db+ emergency whistle that says ICE OUT with the Minnesota State Flag design
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
[M10 Manpack] Ultra Portable Antenna Kit vertical HF antenna with optional loading coil i needed to create a super compact antenna kit utilizing all M10 threads. it enable the user to use the very cheap telescopic whip, loading coil and…
[Newest Antenna design from MiaouCat] THE JUNGLE ANTENNA easy to assemble and extremely versatile. using calculators online you can tailor this to any frequency of your liking and get a nice Vertical GP antenna for a few dollars. the most…
These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…
A simple clip to pass antenna wire through and to be held by a carbon 6 pole or pretty much any fishing pole with a decent enough top section (i.e. not the very fine squid pole types). The simple version should be adequate for most…
REMIX of JerzyG can hold about 50ft of 5mm~ paracord or 100ft of 2mm
Created a mutli-level model for the Twins. Wanted to print out multi color coasters. Resize as necessary (probably will need to scale down the verticality, I printed one out [pictured] and it's a bit too tall). Pause after each color,…
Airbrush Stand for Badger SOTAR 20/20 airbrush, with a cap holder. Compatiable Airbrushes Badger SOTAR 20/20 Badger Velocity Badger Patriot 105 #### Edit (10 May 2018) Added a non branded version Print Settings Printer Brand: Prusa…
Here is a great gift or personal treat: Minnesota Vikings Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print is…
This is a decorative plaque of the Minnesota Timberwolves. If you add a filament change at the correct layer, you get a multi-color print of the logo. Recommendations: Have a very clean nozzle. Any stray material on the nozzle can come…
A guy rope plate to go on the 3rd section of the DX Commander SOTA pole . This fits over the top of the pole when you are extending it and when you raise the 3rd from the bottom section it will sit snuggly on the pole. The inside edge is…
3D-Printed POTA / SOTA Antenna Winders Designed specifically for portable ham radio operations such as Summits on the Air (SOTA) and Parks on the Air (POTA) , these lightweight and durable 3D-printed antenna winders are the perfect…
Printed on Ender 3 S1 Pro, 10% infill.
Minnesota Vikings Oversized Necklace Logo that I designed. I hope you enjoy!
Make your own ATV / UTV plates that comply with the law. USE PET-G or ABS Violating the ATV law in Wisconsin results in a fine up to $250. Violation of ATV and off-highway vehicle use regulations in Minnesota is a misdemeanor, with a…
Enjoy… scale as desired for your preference of color/level heights.
The frame from the original design wasn't what i looked for so i just used the face-plate from the original and made a frame for my own. The frame now has a compartment for a battery-box (max 52x90mm) which is accessible from the outside.…
Minnesota state bird, the Common Loon.
A summits on the air guy winder + tensioner for guying your mast. Are you tired of you guys or cord used for guying a mast getting tangled with each other ? This is designed to provide an adjustable guy with a winder to wind the cord when…
I designed these a few months back when I needed a shelf to hold my filament dryer. I printed with PLA and so far, they've held strong with no visible cracks or bending. I'd recommend printing in a stronger material such as nylon if you…
A 3D-printed Minnesota Vikings license plate featuring Justin Jefferson's number 18 is a unique and personalized way for fans to show their support for the star wide receiver. This custom license plate was designed with the team's iconic…
Support rings for telescopic HAM radio masts in various dimensions. These can easily be scaled in your slicer to fit other sizes, mine are for a SOTAbeams ultralight mast. Re-designed in 2020 to provide more strength at higher winds.…
Now you can show your love for the greatest state in the union (I may be biased). No supports needed.
This is a scan of the Dying Gaul sculpture at the Ringling Museum in Sarasota, FL. I missed some important detail on this scan (like, the entire face) and it turned into a practice test for using the Sculpt mode in Blender 2.8. The right…
Guying ring to support the Sota Beam Tactical Mini mask, inner diamater is 30mm, print with a large number of walls for maximum strength.
Here is the awesome looking Minnesota Timberwolves Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Lightweight set for portable antenna setup only 22gr for all elements in TPU Set was designed to be as light as possible, with decent ammount of strenght, and for minimum ammount of guying rope to be used. Designe is intended and printed…
This tip is designed to press fit on top of the SotaBeams Tactical Mini Antenna Mast. It is designed to accept a plastic carabiner - the kind recommended by KI6NAZ for example. It has reinforcements on the ring for better stability. It is…
Minnesota text cutout within the shape of the state.
Rescale as desired. Print white layer first, then red, grey, then blue.
This is a model of downtown Minneapolis, MN. I was inspired by this company. https://microscape.co/ It was created with photogrammetry and Google Earth. It is actually a photogrammetry scan of the photogrammetry 3d data that is now being…
Outline of the great state of Minnesota, with text at base.
University of Minnesota, Minneapolis, St. Paul, Goldy, made with a filament swap on an old Ender. I didn't have the correct maroon/gold colors but they look decent in red/gray. No supports needed (obviously), easy print for your office,…
I made a stencil for drawing or art you can put on your wall. I used black petg and it turned out well. No supports, brim, and infill 40 percent
This is a really fun Minnesota Wild themed hockey puck that you can display in your house or even play hockey with! Print Settings Rafts: No Supports: Yes Resolution: any Infill: 30-50% Filament: any pla green and red Category: Signs &…
Wire support for vertical (or any other wire) antenna using Sotabeams Carbon 6 portable mast. Designed for 2.5mm diameter wire. Slides over 2nd from top section with tight fit, no aditional hardware needed. Holes are very similar in…
Guying ring for Carbon 6 mast. Attaching height about 2m from bottom. Designed to “catch” junction point of both 7 and 8th section from bottom, so it uses reinforced sections. Rope holes 4.5mm. Tight fit around sections, depending on your…
This is a compact printable case for the SOTAbeams PP 4-Way kit, which is a small and economical distribution block for DC power up to 25A using Anderson PowerPoles. These kits make a great addition to a go-box to power your radio and a…
A simple loop hook to make attachment to the mast itself easier. This fits over the join bewteen the first two sections of the antenna.
A simple hook that attaches to the top section of the sota Beam Tactical Mini telescopic pole. It can be reversed so be used as a fish hook for ‘fishing’ wire or cable.
Refrigerator magnet in the shape of Minnesota with the location of Minneapolis shown as a star. Pause print at layer 29 to insert magnets. Magnet size used: 2mmx5mm
I made a quick stamp using the Minnesota Rebel Alliance Logo. ICE OUT! Print from TPU. Turn on Ironing. Roll on paint and then press onto paper or clothes or whatever your heart desired. It is a work in progress - I will print and test…
As a huge MNUFC fan, I wanted to use the logo to create my first 3D piece. Created it using Adobe Illustrator to export the pieces as SVG, and then brought it in to Tinkercad to combine them in to a 3D logo.
Minnesota Twins Oversized Necklace Logo that I designed. I hope you enjoy!
Minnesota Wild NHL team golf ball marker (25mm diameter, 2mm height and 10mm spike). Usage Place on the green to mark your golf balls location when it is in the travel path of a golf ball further away from the golf hole. Printing Tips For…
Minnesota Timberwolves Oversized Necklace Logo that I designed. I hope you enjoy!
Keyring for Minnesota Rebel Alliance, bc f'ck ICE
This is designed for Sotabeams lightweight antenna wire with a covering of heatshrink to protect the cable. I use 2mm bullet plugs for connecting wire, which are really cheap and found online with retailers like ebay, aliexpress. Slots to…
This is a replacement threaded cap for a SotaBeams Tactical Mini. Mine broke so a created this to replace it. I printed in ASA to withstand the Texas summer heat and with 0.1 layer height for thread resolution.
As per SOTA General Rules, this model cannot be used commercially.
This is a guy line spreader and base with pegs and line tensioners. The line spreader (flange) will slop fit onto the joint between the second and third tubes of the mast. The line goes from the bast that holds the foot of the mast,…
This is a low mass guy ring for the SotaBeams Tactical Mini Antenna Mast. This is sized for the 4th segment up, which seems to work well. It's almost chest height. PETG might be warranted for windier/higher stress climates. The fitment…
Minnesota Wild Oversized Necklace Logo that I designed. I hope you enjoy!
I was inspired by Minnesota's commission for a new flag. I really like what they came up with so I thought I should print it and maybe some other people will too. I hope that many other states follow Minnesota's lead and create better…
Use with zip ties to attach your mast to your bag. Printed in ASA
This a ring to attach guy lines too for supporting a SotaBeams Tactical Mini.
Two emergency whistles based on the MN Flag, with the Rebel symbol in place of the star
A simple clip to attach a Slim G 2m Antenna to a mast. Fits tactical mini, tactical 7000HDS, possibly many more. Simply clip this to the slim g and when deploying, slide this onto the mast before attaching the top of the antenna to the…
Minnesota Wild logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more logos. Print at 100%…
I wanted to make a scaled down version of the model posted by TUxLf3MK to be printable in a smaller format. The original model didn't have enough height difference between layers to easily accomplish this so I made a solidworks and step…
Simple. Print it at .16 layer height for cleanest fit and print. It just works. 3" metal pipe fits perfectly. Stores 1g. Enjoy. Customize.
Bring your favorite NFL team to life with this oversized Minnesota Vikings logo! This model was designed with clean details and printability in mind, making it a fun project for football fans, collectors, and makers alike. Whether you're…
I designed and printed this as I damaged my screw cap for the sotabeams tactical mini mast. I printed these in PLA Typically used for SOTA / Summits son the air. V4 / version4 is a better fit. There are TWO versions of the tactical mini…
A 100db+ Emergency Whistle with the Minnesota State Flag design! The phone number for the Immigrant Defense Network is on the back! Please spread this design far and wide, Minnesota 3D Printers! Stay Strong Minnesota!
Hexagons are the bestigons! Here is a Minnesota shaped ice scraper both in small keychain form for side mirrors and lights, and in full size for windows and windshields.
A dynamic and customizable Minnesota State Flag. There are four (4) models: A full state flag model ready for printing. The Star Left Flag Right Flag
Minnesota Golden Gophers Oversized Necklace Logo that I designed. I hope you enjoy!
Hockey pucks of Minnesota Wild. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection: https://www.printables.com/@m_collectable/collections/2703845
Sotabeams Tactical Mini Antenna mast guy rings. Can be used for both top and bottom. Uses two M3*20 bolts and parachord for guying. Printed in PETG with 4 walls, 25% infill.
This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Minnesota United Christmas Ornament Use the model with supports to save time and materials. (remember to un-click add supports in your slicer if not using prusaslicer)
This is a from-scratch rebuild of the RoboForce figure SOTA. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
This connector is made for hoisting a matching unit to the top of a Tactical 7000 mast. It is modeled after https://www.sotabeams.co.uk/versatile-top-antenna-insulators-5-pack/
This is a scan of the sculpture 'Portrait Bust of a Man', currently on display at the Ringling Museum in Sarasota, FL. From the site: According to an inscription on the base of the bust on the left, the sitter is meant to be Francesco…
Der Erdspieß verhindert, dass der Antennenmast am Fuss verrutschen kann. Der Innendurchmesser beträgt 31mm. Zusätzlich wird folgendes benötigt: 1 x Schloßschraube 6mm (in beliebiger Länge mit durchgehenden Gewinde) 1 x Mutter 6mm 1 x…
Enjoy. Adjust clearance by yourself
State of Minnesota with cannabis leaf.
Ich habe den Halter für einen SOTABEAMS Carbon 6 entworfen. Der Innendurchmesser beträgt 3mm. Zum Drucken eignen sich PLA, PETG und natürlich auch andere Filamente in den Standardeinstellungen.
The settings will vary depending on printer and slicer. I used Orca Slicer with Elegoo Neptune 4 Plus. Find each part below label in the color that it is. Please refer to your own research as to print multi colors. This is meant to print…
The Logo is only 0,2mm thick so print this with a resolution of 0,1mm so you get 2 Layers. The last STL file is then a "Normal" Print with a Layer hight of 0,2mm and an Infill of 20%. The circle around the Print is just for Alignement…
A loop for the top of my sota beams pole to pass a sloper/inverted L random wire. I think it is for the 2nd to last smallest section. I haven't tried it yet but I'm hoping for less friction when I pull the wire through when I'm trying for…
For all you Minnesota Vikings fans. Category: 3D Printing