20 826 modeli
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The ULTIMATE filament spool holder. THANK YOU FOR DOWNLOADING IT! IMPORTANT, PLEASE READ: 1. If you have problems with tolerances, please print this model by Asraff Amzani (thanks for) and carefully read the descriptions. THIS IS…
Wydruk około 14,45 €–17,66 € nettoWstępna wycena jednego wariantu
Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A volumetric calculation was used to determine the precise placement of the lines, as the spool diameter decreases more rapidly when it’s nearly empty than when it’s full. Three versions have been uploaded: Version Description Percentage…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.
Wydruk około 5,01 €–6,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
inspired from commercial product, I tuned it to suit gutterman bobines but can fit with a lot of brand. to use in combination with a clip https://www.printables.com/fr/model/249327-pfaff-sewing-machine-bobbin-cover/comments/1177551…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. Perimeters: 2 and more, Infill: 30% rectilinear.
Wydruk około 5,66 €–6,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: "wheel_holder_noHex.3mf" is uploaded if the hexagonal cutouts is not for you. Made a simple cad model to hold a heavy Solder wheel for people to use at my workplace. Solder roll supported: 64mm - high max 80mm - diameter max 14mm…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena jednego wariantu
This MINI+ spool holder was specially designed for Prusament PLA Recycled with a 2 kg spool. It ideally fits for use Prusament 2 kg spools, but it can be used for any spools thanks to adjustable spacing. You will need: 4x screw M3 x 8 mm…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…
Wydruk około 4,62 €–5,65 € nettoWstępna wycena jednego wariantu
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a spool for holding misc. cables January 2023 update reverted model back to older version that is thicker and more robust
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Wydruk około 22,26 €–27,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…
Wydruk około 5,19 €–6,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This enchanting 3D Printed Ghost Decoration with a captivating twist - it illuminates with a mesmerizing glow when you place a tea light inside! This spooky and whimsical ghost is the perfect addition to your Halloween decor, adding an…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
This model is based on the stock spool holder mount that snaps on the top bar of the Creality Ender 3 S1 (Pro). Use it as a drop-in replacement part or in addition to the original one. With a second mount you can fit a total of three 1kg…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
This is an adjustable print-in-place spool for filament samples. No assembly needed, just remove from build plate, snap off the built-in supports and you're good to go. How to use: Adjust the arms inwards until you can fit the sample roll…
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box. Highlights: Massive Noise Reduction Improved Stability (Lifting the magnetic sheet won't tilt the printer) 6 Support…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Wanted to move the spool holder off my printer to reduce vibration so I designed this simple wall mount bracket. Installation is simple, drill holes and slide the inner piece onto the outer piece ("bottom" text should face down on inner…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A brief video deomonstration: https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool. Run…
Wydruk około 4,58 €–5,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
A compact and reliable filament rewinder based on a linear counterweight mechanism that can be produced in a single 11 hour print. Provides a complete filament management solution eliminating the need for the space wasting and difficult…
Wydruk około 10,88 €–13,30 € nettoWstępna wycena jednego wariantu
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Joe3020 fitted an adapter for 10MM bearings for Overture cardboard spool, I remixed it to work on most spool holders. This adapter to insert into certain cardboard spools to reduce the amount of cardboard dust from spinning against the…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder has been specially designed for Prusament filament samples. However, it can be used for any samples or remnants of filaments from the spool. Up to three samples can be placed on the holder, so it is also suitable for small…
Wydruk około 16,56 €–20,24 € nettoWstępna wycena jednego wariantu
Update 2022/04/19 I've created a version of the Mark 3 arms for 2020 VSlot aluminum extrusions. Check out the remix section! Update 2019/10/18 I've imported this project from my Thingiverse account. To make things clearer, only the Mark 3…
Wydruk około 4,28 €–5,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
All I did is take what Prusa provided on Printables, and made it longer, that's all. I've found that I lacked places to hold 2kg spools while working. Now I don't. If someone else find this useful, happy printing! Don't throw short…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
Cardboard filament spools do not unwind easily on a spool holder. Two of these rings reduce the friction. On user request, I added 2 larger versions: Standard is 54mm diameter. This one should fit Larger version with 54.4mm diameter for…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Set of spool holders for Prusa MMU upgrade ( or any other printer/situation) were you want to print from your wall. mounted on a Skadis board from Ikea. The bearings and rods I used are all from the Prusa MMU2s Upgrade kit. This design…
Wydruk około 5,43 €–6,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview A simple retractable and locking spool for holding 20m of 3mm paracord with built-in storage on the back for hanging hooks/clips to use on the line. I would love to see any makes so please post some pics, you get prusameters too!…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I used to operate auto rewinder spool holders like https://www.printables.com/model/199248-narrow-double-stand-for-75mm-integrated-auto-rewin inside my dry-box. The challenge with those was that it always was kind of some fiddling with…
Wydruk około 8,49 €–10,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
Wydruk około 7,20 €–8,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement holder if the creality spoolholder needs to be used elsewhere Layer 0.2mm Perimeter 4 Fill 15% Gyroid Supports yes The model is designed in the absence of a digital spool rack…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated to v.1.5 . Reinforced locking cone. This side is completely flush. On the opposite side, the tube is extended by 0,5mm. Spare sewing machine thread spool to rewind thread from big one (for overlock machine) to home sewing machine.…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
this is just the spool holder end(thats came with my original prusa mk3 spool holder) that the spool sits on, perfect direct replacement part if yours broke like mine. have any questions message me. Print instructions printed .15 layer…
Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu
Spool holder compatible with MMU3 layout thanks to the filament guide included into a side part. only one specific side to print if you want to adapt your Ultimate Spool Holder for MMU3 layout For assembly, I advice to position cylinder…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena jednego wariantu
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…
Wydruk około 10,14 €–12,39 € nettoWstępna wycena jednego wariantu
I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in NovaMaker Silk Gold PLA on a Prusa MK3S+
Wydruk około 3,85 €–4,70 € nettoWstępna wycena jednego wariantu
Uses the original screws to attach the original spool holder to the adapter. Needs two extra M5 (minimum 15mm long) screws for the frame attachment. All holes have a diameter that enables screwing the screws directly, or using a tap…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Updated Modular organizer for sewing machine bobbins. Segments can be screwed together, can fit 6 bobbins per segment. Now with increased clearance for easier use. Print instructions Resolution: 0.2mm or lower Infill: 20% Rafts: No…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
Wydruk około 17,36 €–21,22 € nettoWstępna wycena jednego wariantu
Side Spool (left or right) filament guide with filament sensor for Ender-3 S1 No support needed - Gcode included is for Ender-3 S1 PLA / 0.2 / 15% infill It made for PC4-M10 PTFE connector EDIT: S1 pro/Led bar version added ("guide_led"…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
🇬🇧 This is a very simple filament spool rack. You only need two wooden rod (⌀ 18mm diameter) between the printable ends. Also, you can print the included small horizontal supports to avoid rods bending with tender wood. I printed them in…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Using 2kg spools for printing require a spool holder extension. I got inspired by a model of MartinL and his simple extensor. But his model just doesn't fit, because it has just a blank hole without clips/pins. So I modelled my own…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Hey makers, I still had exactly 5 PC4-M10 PTFE adapters and i wanted a long clip to integrate them into Michal Fanta's wonderful spool holder system. So I built in an M10 thread and minimized the holes from 4 to 3 mm so that the PTFE does…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have designed these easy-to-use cable tidy spools to store a variety of cables in a neat and compact manner. My previous method of using rubber bands and cable clips was still problematic due to the cables tangling and the difficulty in…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
3DP got tired of adjusting the Prusa Mini's stock spoolholder. And when the big spool didn't fit, he lost his last bit of patience. He decided to create a new one that would fit all spools. He created a new spoolholder that would fit any…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
A vertical solder reel holder for desktop use. It has a guide and a spool lock to prevent unwinding while being moved about. There is an M6 thread in the guide arm for a strengthening bar, and an M12 thread in the main spindle for either…
Wydruk około 7,76 €–9,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just 2 versions of clips on which we can screw PC4 (Push to Connect) M6 PTFE fitting. I don't have CAD software to edit STEP files then i updated the original STLs using Blender. The threads were generated with OpenScad before integration…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple spoolholder with a hex-pattern. Fits perfect for Prusament spools. Print instructions Best results with 0.15mm but also works with 0.20mm. Print with PLA or PETG Print with support on build-plate only for body 15% infill For a…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Since I don’t have space for a standard spool holder and even for any vertical spool holder, i have used or rather tried to use horizontal spool holders. I have used multiple types from this website. E.g. i have used this one:…
Wydruk około 7,09 €–8,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PolyDryer Splitter Mod – Dry Two Spools at Once Thanks to this mod, you can dry two spools at the same time using a single PolyDryer unit. This design is ideal for users who own only one dryer and want to optimize their drying process,…
Wydruk około 14,82 €–18,12 € nettoWstępna wycena jednego wariantu
With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple measuring cup that I am using to measure detergent for the washing machine. A full cup is 40 ml and the line inside the cup marks 20 ml. I have printed the cup using PETG but should work with PLA aswell. Rember to use supports…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It would be nice if you post your make. Thank you
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
09/17/22 update: If the wingnut continues to loosen when the spool spins, you can rotate the base 180% and flip the fishing line spool 180%. Or you can add an extra jam nut before screwing on the wing nut. After overpaying for 200yd…
Wydruk około 5,32 €–6,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EDIT 20210127 Added Holders for Flush cutters, Pliers that come with Prusa Printers and IPA-Spray bottle holder. Also found out that all parts can be printed without supports :) EDIT 20210120 Now works with the IKEA Skadis System Since I…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Needed a bigger nut to fit spools with bigger holes. (e.g. Sunlu spools). Should fit on spools with a hole with 76mm diameter. Also works with Prusament spools. Print instructions No supports needed. G-Codes for one or two pieses available.
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
Here is an rail spoolholder for larger rolls! Hier ein angepasster Spulenhalter für größere Rollen! Print instructions 3-4 perimeters + 20% infill for strength.
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This spool holder is modified 2 kg spool holder from @Prusament to be compatible with Prusa MK4. Was extended and cut from the front to avoid a risk of collision between the extruder and filament holder. Note: If you find any problem, let…
Wydruk około 5,72 €–7,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 This adapter is usefull if you want to use the Gravity Spoolholder for single filament Prints without the noisy clonk sound 😏 Print instructions…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter inserts into certain cardboard spools to eliminate the cardboard dust from spinning against the spool holders. Fits cardboard spools: Polymaker Overture Inland (Microcenter) Duramic I personally use Polymaker filament because…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
I've been learning FreeCad by designing my own accessories for RastaP's Honeycomb Storage Wall . This Solder Spool Holder is my first fully parametric design. The FreeCad file has a spreadsheet in it with all of the parameters. The ones…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You do not know what to print for Halloween? How about this Halloween pumpkin with lid, big enough for one or 2 LED tea lights. (ex: https://amzn.eu/d/cHnOr0r) Dimensions: Diameter approx. 101.20 mm Height approx: 90.06 mm Printing:…
Wydruk około 7,43 €–9,08 € nettoWstępna wycena jednego wariantu
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Base with honeycomb bottom and fixed filament guide for Gravity Spoolholder by Michal Fanta . It has a thread for a PC4-M10 connector. Many thanks for the great design.
Wydruk około 8,27 €–10,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summary: This spool holder component is for Prusa MK2, MK3, and MK4 printers. This spool holder is compatible with the default provided injection molded spool holder from Prusa, and matches the same aesthetic. The 1kg version of this…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A quick and easy-to-make replacement for your old, damaged, or missing toilet paper spool holder at home. The roller should fit most toilet paper holder brackets. Additional parts required: Spring from old toilet-roll spool (or a new…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
Simple spool holder for Prusa Mini+ (and similar). They sent me a wound plastic that protruded beyond the coil and I could not use the standard coil stand. Those models of holders that I found seemed to me too complicated (and requiring…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have designed these easy-to-use cable tidy spools to store a variety of cables in a neat and compact manner. My previous method of using rubber bands and cable clips was still problematic due to the cables tangling and the difficulty in…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Recommend printing with at least 15% infil. This is ment to be used with:…
Wydruk około 6,02 €–7,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is a roof part for prusament spool birdfeeder by RT3D Workshop. The original model risks getting the fod wet and causing disease to birds. This is simply an extension with soda bottle threads, no gluing is needed. The original model…
Wydruk około 13,10 €–16,01 € nettoWstępna wycena jednego wariantu
When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed my own Cable Tidy that was great, unfortunately, it didn't work too well with thin flexible cables, so I found this one by 3DprintA18 at https://www.thingiverse.com/thing:3961897 Print instructions Printer: Prusa Model: Mk3S &…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
No matter which Artillery Sidewinder X2 review I saw - all, myself included are unhappy with the original Artillery Filament spool holder. It is wobbly, tends to fall apart, and the filament sensor holder is awkwardly positioned. Thats…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Description: Vertical Prusa MINI+ Spool Holder. Easy to print, no screws needed. Cool and space-efficient way of storing your filament while printing. Well balanced. Print in one piece. Print Settings: Printed with 10% infill with gyroid…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
