1049 modeli
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
Wydruk około 4,37 €–5,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
Wydruk około 9,17 €–11,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
20.1.2024 Another week point found. :) So here is version 3. Added rib to Slider to add overall stiffness Adjusted geometry of pins that push joy con buttons. Now you can feel and hear response when you push Paddle. bgcode and project…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
was expanded from the original with a pressure shell. Since I couldn't print the steering wheel with supports to satisfaction. Printing without supports or anything like that. After the printing break, remove half the steering wheel and…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Created this attachment to mount the steering wheel to cardboard. I'm a noob, so I'm sure there was a more efficient way of doing this. I ended up doing it in 4 pieces for easy printing. All parts screw into each other. The idea is to pin…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Serve as toy or decoration. Maybe it could be used in a go-kart project if it were modified properly :) require screws: 6x - 3mm x 10mm 7x - 3mm x 15mm Printer setup: Nozzle diameter 0,4 10% infill Layer height 0.20mm no supports
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: I reorganized the files so they are easy to find in chronological order for printing and changed some file names for better understanding. I deleted the back plate file from the project due to confusion about what to print. I also…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
I used 4 m3x30 and 2 m3x20 socket head bolts and nuts. I printed it with carbon fiber petg with 60% infill but I recommend the highest infill youre comfortable with. The grips are pla and 20 to 30% infill is fine for them.
Check LOG bellow for changed parts! _ INTRODUCTION This controller is a 3-axis + 15-button HID, designed with Euro Truck Simulator 2 in mind. It also works with other games. The steering wheel has 900 degrees of rotation and force…
attach to your ps4 controller and get racing
Project main site: https://www.thingiverse.com/thing:4891321 This is remix of Formula B1 - (Sim racing) steering wheel for Thrustmaster T300 RS wheel base. With other wheel mount or quick-release, this wheel could be also used for another…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
I made this simple phone holder for watching videos in the car when I wait to pick up my kid outside the school. It is NOT to be used whilst driving. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
U can print this as one part in standing orientation.
GR.3S DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
GT-R DIY Steering Wheel PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Wheel Features 300mm Diameter x14 Pushbuttons x2 Optional Rotaries x2 Magnetic Paddle Shifters…
Remix from: https://www.printables.com/model/333283-simple-brushless-rc-sport-hovercraft
Steering Wheel for Cardbox cars or where ever it might fit! thightening just be turning the knob down! Wheel is screwed down with a m6 Screw, the Knob with 2 M4x25er from each side.
This is a simplified model of how a car steers using a rack and pinion setup. To replicate this model you will need print: 1x Axle Left 1x Axle Right 1x Crank 1x Gear 4x Linkage Pins 2x Linkage 1x Rack 1x Steering Assembly Support 1x…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
AMR DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
Great steering wheel for any driving video game!! Made to fit an Xbox one controller, it fits perfectly and fits snug! Super simple to print with minimal supports and prints quickly! It uses a generic skateboard bearing for the center and…
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
Made this to wall mount my NRG Quick Release steering wheel when not in use. Printed at >50% infill No Supports needed Use 4x wall anchors to mount into drywall.
Designed for a Logitech G27 Steering Wheel with a section of 29mm*32.5mm. Assembles as press fit with a 608 bearing. Prints nicely with adaptive layer height for the knob. You will need: M6x20mm Hex Head Bolt M6 Hex Nut 608 Bearing
With this wallmount you can hang your steering wheels on wall. Steering wheel locks in place with Moza Quick release mechanism. PLA works fine for me, 15% gyroid infill.
Replaceable Steering Wheel Cover for PXN V99/V10 (PRO/ULTRA) To install, remove the hexagon head screws from the wheel and replace the faceplate. To assemble the handles, you will also need: 6x M3 x 20 mm screws (DIN 912) 6x M3 nuts
This project includes over 100 .STL files, the entire assembly .STEP file, Grip & Molding files, a DIY guide and more! You can get all the files from this public Google Drive link:…
Two different steeringwheel model that I design with my kids next to me so that the size and details fit what they wanted.
This project has wasted 20+ hours of my life. So please enjoy it and fix any issues you come across. Also feel free to improve and modify this design however. (Side note, this kit gives the exact same angle or a couple degrees more than…
This was designed to fit a 92-95 Honda Civic. It fits right behind the steering wheel on the ignition/steering column cover and you have plenty of room for the wheel to turn without hitting them. This likely works for quite a few cars but…
Steering Wheel Stand for Phone or Tablet: Park & Watch Spending some time in your parked car? The steering wheel phone stand lets you quickly and easily set up your screen when you want to pass the time in your car. Simply unfold the…
xbox steering wheel to play video games
This is a part of the cabin design of my Unimog RC project . I'm providing the 1/10 print files but also the 1/5 in case you want to use it outside the design. I'm using height range in the print files in order to get the top part as nice…
I lost one of the spacer bit for my g920 and decided to model the one I still had in fusion 360. Print settings I used: Layer height: 0.2 10% gyroid infill Brim adhesion
VW Golf MK2 GTI steering wheel miniature created to use as a keychain. Printed with 0.2 nozzle.
F1 Mclaren MP4-30 2015 Steering Wheel. Mclaren MP4-30 2015 Steering Wheel full scale replica. 129 pieces relatively easy to print with the 0,4mm nozzle and simple assembly. It is a model that requires a little more time than a single…
This bolts on over the front end of the steering rack on the TT02 and takes out some of the side to side slop. The stock screws you remove to fit this are too short, you'll need ones somewhere around 15-16mm. When I finished my TT02 build…
Here it is the replica of Lewis Hamiltons and George Russels steering wheel. This is a static (a decorative design) model and it is not designed for simracing or similars. I hope you like it. I also leave you here the stickers that I have…
Your child want to drive a real car or bike - but is waaaaaay to young? No problem - with this steering wheel! Just print the wheel & stand and add a screw (6mm diameter / 50mm long / max 14 mm head) with 2 nuts to keep it safe. The wheel…
this can be made with two colors or with one color. Recommended settings: Layer height: 0.2 mm Supports: None Nozzle size: 0.4 mm Infill: 100% or less Materials: PLA Brim: None
This model is compatible with the lego system.
Credit to F1 Steering Wheel by Ata Mert Aka. It is a 100% accurate engineering model with over 200 pieces. Every, screw, nut, circuit board, screen, etc … but it has many 2D surfaces that can't be 3D printed. Anywhere that was carbon…
Fully 3d printed design for the PS5 mini wheel. No need for bearings/springs/shafts Category: Games
This model was built by myself from scratch, but I made reference to @Referentiel 's Wheel Pro and added an adjustable vise for it to hold Joy-Cons both with or without protection case. I also added holes for @LordS_809327 's Paddle…
This steering wheel is really big (~2h print time). It will block your view on the bottom right part of the lcd :D
add al the components together! start racing! :) BTW: you need a bearring for this....... (check original post to see wich one)
This model is compatible with the lego system.
Hi, I made a 3D model of a SG90 Servo Steering Gear, 20 tooth, 0.5 Mod 20PA. This is used in my project '35 KPH FAST Lego RC CAR - Lego RC Car Part 2' on my YouTube Channel TinkerTown. Check out the details there.
Tištěno na tiskárně Prusa I3 MK0 - 3mmABS
Die *.stl Datei muss gegeben falls repariert werden. Es empfiehlt sich mit Stützgeometrie zu drucken. The *.stl file may need to be repaired if necessary. It is recommended to print with support geometry.
I made this one for my DIY tractor, to help with steering this hell-machine. My hint for you is to print together top holder and ball - just use supports. It will not be possible to combine these two later, also no option to separate (but…
This model is compatible with the lego system.
Two Versions Available: Version 1 - For GS / FSR / ES / SCV12 / MISSION R Wheels Version 2 - For RS / CS Wheels Installation Instructions: Step 1: Pull the quick-release lever on your steering wheel toward the wheel face until it locks…
Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my…
A knob for your printer, to turn round the elegant way
This model is compatible with the lego system.
This model is compatible with the lego system.
This is press-fit, you will need to play with it a bit to find the right size. It's also possible to glue it in place - it's very unlikely that it will break, this is much sturdier than the original one. STEP and F3D files included. In…
I thought of doing this to give an interesting effect
This is probably a problem in all golf 3. I printed petg, bcs i don't like print with abs. 100% infil. 2024-10 Update. V3 is only longer, V4 and V5 I made it more convenient to print at an angle without support. Inclined at 30 degrees.…
An elegant ship wheel knob for the 3D printing captain that you are. A slightly less obtrusive size of pedRamezani's original: https://www.printables.com/model/238864-giant-ship-steering-wheel-lcd-knob-for-ender-3-end While I love the…
I have build a custom replica of the legendary AMG GT3 steering wheel for sim racing. I made some adjustments to make it more compatible with sim racing needs (funky switches , rotary encoder etc). The wheel is mainly made of carbon and…
I wanted to wall mount my SimMagic DD Steering wheel, but other than having to buy a full or even half a hub at a huge cost, i thought i might have a go at printing one. V1 was printed and was too tight of a fit and require sanding. Also…
Simple design to learn about car steering wheel No support required I have a plan on create mini driving gear with force feedback for my future RC car, and also able to play Euro truck simulator 2. A very long way to go Outer diameter:…
Here's my design for Carbon Fibre Formula or GT3 style steering wheel with sequential shift light. I made this for my Mazda MX5 track car but the wheel uses a standard bolt pattern that will work for mostly any vehicle. While the wheel…
Steering wheel for kids. Easy to print without any support or infill and fits on Prusa Mini. Space in middle to put logo or name. Feel free to remix it and customize to make your kid happy.
Horn delete plate/filler, bolts between hub or quick release and steering wheel. Doesn't protrude like the other delete plates with rings around them. *Print upside down with supports Print Settings Printer Brand: Creality Printer: Ender…
I don't know if I should even share these, as they are far too awesome for the general public to handle. BUT! I think Optimus would want it this way. So, here they are: AUTOBOT BADGES FOR YOUR VANAGON! These fit an '88 VW Vanagon 2WD (I…
200mm (outer diameter) steering wheel, designed to be printed in two parts then glued together. 5mm hole for mounting. Original design, blender file provided for customization.
Enjoy a video as you sit in the Costco parking lot eating a poutine or as you sit waiting to pick up kids from school. Please do not drive with this on your wheel. Designed for a stock 2019 Ford Edge steering wheel and a phone that is…
Formula 4 Steering Wheel with Assembly Guide This project contains the components to build a Formula 4 style steering wheel that is compatible with popular sim racing software SimHub. This is the same style of wheel used in the iRacing…
Compatible Products: ESSENZA SCV12 Steering Wheel Vision GS Steering Wheel FSR Formula Wheel GS V2P Steering Wheel KS Steering Wheel Installation Instructions: Step 1: Assemble the desktop stand according to the included assembly guide…
Summary I modified the original Tarmo5 steering link to adjustable steering link. Screw = M3x30mm countersunk head Nut = M3 Many thanks to Engineering Nonsense for this beautiful Tarmo5 RC Car! Nothing special I am not a CAD modeler Print…
Steering wheel for 1/10 scale RC Tim Cameron's Showtime buggy. Use M3 nut and bolt. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.15mm Infill: 20% Filament: gembird PLA+ black Category: R/C…
This model is compatible with the lego system.
This is a steering block I remixed from Sidpatchy's model . I made the piece that attaches to the steering assembly a little bit thicker to make it more durable. Link to the original Traxxas product here Compatibility: Traxxas Bandit…
This is my Version of LocalwarCorp´s F1 Steering Wheel. It is optimized for smaller printers (build plate of max 150x150x150). There are some screws needed for the install. Some pliers are also a good idea (for pusing the pins into the…
A simple interactive steering wheel for toddlers. Printable without supports. Fittable to popular BabyBjorn bouncer. Assembly with superglue, paintable with toy-safe acrylic paints (european standard EN 71-3) As safety cannot be…
Update 22/05/26: Added WSS_CrackerCrows.stl (fully wiimote functional) & WSS_CraskerCrows_Prop.stl (Non functional prop, just for play). Based on the MPI-K-Tilt by Max Papis Innovations Many thanks to user @CrackerCrows for requesting…
This model is compatible with the lego system.
This model is compatible with the lego system.
A stand to display steering wheels, compatible with 70mm D1 quick release systems. Max diameter for round rims: 320mm.
In addition to a sequential shifter, Logitech Driving Force GT steering wheel has little nubs behind the wheel for changing gears. Those are not very nice to use. This design is for an add-on shifting paddles that are attached around the…
RC car steering suspension replacement for a broken one
This cap fits both: AirTag and Moto Tag. It is a press fit, so make sure it holds with enough force. My inner tube diameter is 31.85mm (Rockshox ZEB Select+). Pressing force was about 5 kg. If your steering tube is wider you can wrap…
After I found a Go Kart in the garbage because the steering wheel was damaged, I decided to draw a steering wheel to 3D print it. Size of the steering wheel: Ø197,5 mm Hole diameter for the Shaft: Ø23 mm Print instructions: Filament: PLA…
ENGLISH : Ferrari 488 GT3 Steering Wheel for Sim Racing. Compatible with Simucube 1 and 2 wireless. Based on this PCB : https://s.click.aliexpress.com/e/_AAYK5Z More informations :…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is remix/heavily inspired (and redrawed from scratch) of @JoseJacobUK_230742 model for two reasons - original model didn't perfectly fit on P1 V2 wheel and its STL has errors (unable to import). Although original caps and stickers…
i had an issue with a to loose steering link that is when i made this change that made the tolerances higher
