8500 modeli
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
LED strip clip. Simple and works very well. Screws on one side only, so very compact. fits 10mm strips. Do not attempt to print on its side, screw will split the layers and crack the print….. I printed 24 of these all at once with no…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Remix of the popular mirage planter model by Teque5. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps, which are all scaled correctly. CS:GO Wall Art Maps Collection by…
Wydruk około 12,38 €–15,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the popular dust2 model by Frenzaih, updated to print better and (in my opinion) be slightly more accurate. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps,…
Wydruk około 8,87 €–10,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATED → 20.02. 2022 Removed bottom text due to customer comment UPDATED → 13.04. 2021 Changes: Updated STL, 3MF and G-codes Thicker bottom Reduced overhang at the handle at the bottom Thicker walls due to waterproofness. Added version…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Everyone's favorite Counter-Strike map de_mirage turned into a small succulent planter. This particular map version is from Global Offensive (CSGO). I really like admiring this from every angle, so I put the whole thing on a small…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Be sure to upload makes!
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is a remix of my own LED Strip Clip https://www.printables.com/model/68805-led-strip-clip This one allows you to mount two strips side by side with a single clip/screw. Great for the undeside of a lack table. Printing Print a few of…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This is a 200mm long bracket to hold a 10mm wide 5050 led strip on the frame of the Original Prusa i3 MK3/S. Remixed from https://www.thingiverse.com/thing:3034514 by nrp Print instructions I printed it at 0.3mm with supports and brim to…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
This is another “string winder” to wind and manage the line for flying a kite. Most designs I have seen were too small for my taste. That is why I made my own design. When you like a smaller „winder“ you can scale it. Of course you are…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
Wydruk około 3,64 €–4,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
I liked the power strip support, but had not enough space on the sides. so i just rearanged the holders to be screwed in front and back. i printed it with minmal support, just to make sure it comes out great. you can also print it without…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PowerStrip wie Tesa PowerStrip in super klein und mittelgroß Update 21.05.2023: PowerStrip_spezial hinzugefügt Update 29.05.2023: PowerStrip_universal hinzugefügt…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
The model can test your stringing and oozing behavior quite efficient up to 5 colors. The 3mf file has already sliced the 5 colors for you. It's sliced in the Alpha 2.7 Slicer version with Inputshaper, be aware about that. It's at the…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year!
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…
Wydruk około 3,86 €–4,72 € nettoWstępna wycena jednego wariantu
McDonnell Douglas F-15 Strike Eagle Fighter Jet Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Didn't have and couldn't find the aluminum channel for the LED strip lights, so I printed one out of PETG. So far it's holding up. I don't keep it on all the time, and I haven't don't any really long prints yet. Please use at your own…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LED strip mount to clip a light strip in a 45° angle. I designed it for a Philips Hue Lightstrip to be mounted behind a cabinet. The mount can be taped to an object, but in my case I decided to drill holes afterwards and mounted it with a…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Time is changing and a lot of opportunities are being created every day i think 3d printing is one step two the right direction. let's make the world a better place, a place where everyone has a chance to be successfull !! Print…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
Support de piles AAA : Peu contenir 12 piles AAA Peu être accroché aux murs avec une vis plâtre ou bois Instructions d'impression : Imprimez à plat et sans supports (comme sur les photos) Remplissez un peu pour la solidité
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
Beads for hoodie strings or shoelaces after the popular retro game Pacman. You can find the main character and a ghost in the set. Easy to print: Pacman with minimal support and brim, placed on the back side of head and ghost with or…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Needed something to hold two power supplies so used the one closest to the dimensions I needed. I moved the screw tap to be centered, removed one of the multiconnect slots and lowered from 100 mm to 55 mm. I had a comment that the screw…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws. The difference between the -1 and -2…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keychain with headshot logo.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
I saw Martin44's LED Bar which mounts into those mysterious hexagonal holes on top of the Z axis, but it's too big to fit on the MK3S buildplate as-is. I split it into three pieces - it fits on the Mini now - and added pin alignment holes…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Tame That Under-Desk Mess This simple cable organizer can be affixed under a desk or table using small-sized 3M Command Strips. Print as many or as few as you need, and organize your cables without screws or damaging adhesive. Prints…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Something designed, hopefully never to be used. Having tried out a few methods to split ventilation from one ventilator to multiple test lungs, this is my latest solution. It is designed to be simple and fast to print. The splitter has…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
Update: Added even lower profile version Update 2: Added a version for 2 Power Strips with a stronger hook
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesen Klemmen können 2 oder 3 Gardena Micro-Drip Verteilerrohre 4,6 mm (3/16") gebündelt werden. Das System sieht dadurch etwas besser aus. Translation: DeepL These clamps can be used to bundle 2 or 3 Gardena Micro-Drip distributor…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für meine Schüler bei der Feuerwehrjugend habe ich das dreifarbige Logo der “Freiwilligen Feuerwehr” erstellt. Entweder 3 teilig zum Verkleben, oder Komplett mit manuellem Filamentwechsel. Either 3 seperate parts or 3 colored with manual…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This Winder will ensure your string remain ready to serve. You can spool 2x30m without problem
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This ostrich sculpture captures the tall and elegant stance of the world’s largest bird. Ideal for collectors, nature-themed displays, and classrooms studying exotic wildlife. Printing : Suitable for FDM and resin printers Supports :…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
I saw a bunch of others models out there, but most seem to require screws (which I don't love in the bathroom and can't do in a rental property) so I wanted something that would fit on my build plate (Prusa Mk3) and would be supported by…
Wydruk około 8,73 €–10,67 € nettoWstępna wycena jednego wariantu
I adjusted the wall thickness from JBs model to 3 mm (that is strong enough), the height to 41 mm to fit my power strips and also optimized it for better 3D printing. If you want to remix the model, please take the original one from JB.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Printed without support with cylindrical pins (3mm diameter, 14mm length) you can connect multiple of these units together. CAD Model…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
Made to work with the Honeycomb Storage Wall system. Requires a single open hollow insert. Does not require supports.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Get ready to meet your new best friend for soldering LED strips and/or wires! I had to find a suitable sidekick for my upcoming soldering marathon, so I printed and tested two models that seemed promising. But alas, they were too…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My friend collects old Tonka Toy Vehicles. In 1965, Tonka make a police jeep #325 with a black & white striped hardtop roof. In 1962, they made a #350 Pink& White Surrey Jeep. There is also a green roof from the Vintage 1965 Tonka Jeep…
Wydruk około 9,79 €–11,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting clip for the Philips Hue Lightstrip V4 or other LED strips with 15 mm width.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
adapted the size to fit a 43x50mm powerstrip
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
//Which file to choose : 1) Mounting Option: Nut version Threaded insert version needs 4x M3 threaded inserts, preferably short ones Fasteners that go through the fan also screw into threaded inserts, instead of plastic 2) Want to cut off…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Nihil Strikeship appeared in the Star Wars main comic run (2020-) #29. Dimensions Length Width Height 86mm 63mm 17mm The model comes with an articulated stand. Alternatively, it is also compatible with a big pin and base . Print…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Flame cap to fit 14mm acorn nut on rear or front Strider bike through axle. Printed in PLA with 25% cubic infill. Will update with another version I find durability is an issue. Created mainly to make my kid faster, and partly to protect…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hey team, I recently had a need to transport a ‘Size D’ Argon gas bottle and wanted to put together a dust cap for safe transport. The information for this threat was gathered from this website: https://www.hoseshop.net/blog/bsp-threads/…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mounting system for LED strips and profiles like this one: https://bit.ly/3KG2Qot These can be used in 2020 extrusions for Voron's or similar printers. No tools are required, just a simple 90° turn to lock it in place in the extrusion.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a key for a Kohler generator enclosure, tested with model 14RCA . The original part is manufactured by Industrilas: Keys for insert 2-370 part number 291108 . I took measurements from the physical key and CAD file supplied by…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This zebra sculpture captures the unique beauty of its striped coat and elegant posture. Perfect for collectors, educators, or nature lovers looking to add a safari touch to their shelves. Printing : Suitable for both FDM and resin…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: UNITED KINGDOM, UKRAINE, CZECH REPUBLIC,…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Tidy desk, happy brain 🧠✨ This U-shaped holder lets you mount a power strip or similar rectangular item under a desk, on a wall, or inside a cabinet using two countersunk screws. The open top lips keep the strip securely in place while…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A slatwall designed power strip mount which can be slided inwards and carry a powerstrip without restricting any access.
Wydruk około 1,48 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this sturdy and versatile mount, you can easily hang string lights for a warm, inviting atmosphere. Perfect for restaurants, patios, or home decor, these mounts keep your string lights securely in place while allowing for…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Mynocks : Empire Strikes Back : Star Wars Stick a few of these on your windows or models.
Wydruk około 3,25 €–3,98 € nettoWstępna wycena jednego wariantu
Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
I was getting frustrated with the design of my previous stripping basket because a wave would hit me, fill my basket up with water and because of the lack of sufficient holes for water drainage, the basket would become heavy and weigh me…
Wydruk około 7,82 €–9,56 € nettoWstępna wycena jednego wariantu
This print was an update of my original power strip mount, modified to fit a rectangular bed frame without the need for double sided tape. This was designed parametrically, so you should be able to change the features as needed if it…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.
Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This winder is a small one for thin and short lines. I use it for my Prism 3D indoor kite.
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Original Author: Emmett Lalish The following modifications were applied in order to…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wydruk około 4,69 €–5,74 € nettoWstępna wycena jednego wariantu
Printed in three parts that need to be glued together. Optionally, you can insert two 3x30mm steel dowel pins to increase the strength of the glued part. Material 10mm wide 12V LED strip 4pin XLR male connector 80cm cable 2x 3x30mm steel…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
I like the way it looks with both the long ones and the dot at the end, but if you just want to stop the ringing, you only need to use one (1) of the long ones. I don't own any other squid balis, so I don't know if it's compatible with…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
A three colour keyring and fridge plate featuring Hobbes from Calvin and Hobbes. I've included the colour change .gcode created in Prusaslicer as well as the .stl
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Pen holder for wall mounting with power strips. Extra space to detach. For 4 pens. We use it to label our annual calendar.Size for original power strips. For loosening from below with needle-nosed pliers, for example.
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
Another niche art item. While creating art I often need strips of tape that are exactly 1/16" or 1/8" or ¼" (etc.) wide. While I could pull out a cutting mat and a ruler to do it, I wanted a quicker, easier option. This simple jig has…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Fluid Distribution Cap for Hydroponic Agriculture applications or a Microgreen Machine. Distributes water to up to 8 ways. It is designed to work with 1.5" (1 ½") PVC pipe threads, and 0.25" (¼") standard rubber irrigation hoses.
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
54mm width 41 mm height To get enough strength use a perimeter of 4 Please leave a like to be mounted with screws or doublesided tape (which does not work always - depending on surface of the table and weight of the plugs)
Wydruk około 2,42 €–2,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Audi a8 d3 krytka ostřikovače
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
A mod kit for the TF2 pistol by methanejuice. Please rate, like, and download so I can get free filament and keep making models. Adds: Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag. Aravage Range: 196.55in…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We needed a convenient way to store reusable shopping bags in the kitchen. I found a great model by Rixon Redd on Printables and modified it to be mounted with a 3M Command Indoor Picture Hanging Strips (Large) Pairs.
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Soportes para sujetar una regleta de enchufes cuadrada La tengo en una estantería pequeña de ikea Los Gcodes están preparados para MK4 y para MINI+
Wydruk około 1,97 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
WAGO 221 Keychain Multi-Tool: Strip Gauge & Lever Opener 💡 Project Summary A compact, pocket-sized 3D printed tool (keychain) designed to significantly accelerate and simplify wire preparation for WAGO Series 221 splicing connectors. This…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print Settings: Material: PET-G Layer height: 0.25mm Infill: 20-30% (recommended) Supports: Not required Assembly & Mounting: Parts joined with: M3x24mm screws Wall mounting: Countersunk screws 3.5x20mm Features: Custom-designed for…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I sculpted a model of a Boa constrictor to act as a base for some cool candles found at Aldi's. I include the original source file from Blender 4.5 but the scale will be wrong in that. How I Made It The base was made using a Bezier curve…
Wydruk około 8,31 €–10,15 € nettoWstępna wycena jednego wariantu
