1287 modeli
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed pacman remix could work better:…
Wydruk około 5,93 €–7,25 € nettoWstępna wycena jednego wariantu
I designed this set of wrist rests for your Keyboard and Mouse. The keyboard wrist rest is designed as a split pair. I tend to swap out my keyboards between several different styles (standard, split, Alice, etc.) so having a wrist rest…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just your average XYZ cube with a few extras.
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
I made these to test whether Z-Hop has any effect on knocking down fragile parts. However I soon realised that these very simple parts are hilariously hard to print. So, give them a go, and post a make if you succeed (or fail!) and maybe,…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. Slots are sized to fit blades similar to sizes 000 or 3 1/2 (T blades will fit, but will knock into other blades. See…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Are you the owner of an insect-eating pet in your living room terrarium? Has it happened to you that insect food successfully escapes its digestor and makes it loudly apparent? You may have tried to trap him and end his loud preludes, but…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The door holders wear out over time to the point of being non-functional, so I constructed more robust ones in the same dimensions: The upper part (female) measures 98 x 22 and has a hole spacing of 78mm. The two lower parts (male) have…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
General Information: This is my version of a proportional divider / scale tool for artists. This tool is essential for accurately replicating the correct proportions from real life to paper/canvas. It has a modern and simple design. The…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Update December 28, 2024: Per request, added a PrusaSlicer 3MF file (and a g-code file for the Prusa MK4) with raised text that says “CALIPERS” - with a color change for the text and then another color change to go back to the original…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Gewürzregal passend für die Dosen von JustSpices als 4er 5er oder 6er Variante können Sie das Regal einfach mit poppelseitigen Klebeband in der Küche montieren.
Wydruk około 4,21 €–5,14 € nettoWstępna wycena jednego wariantu
3D-Printable Microphone Stand for Shure SM7B, SM7dB or many others. Elevate your audio setup with this custom-designed, 3D-printable microphone stand, specifically tailored for the Shure SM7B and SM7dB microphones. Whether you’re…
Wydruk około 4,95 €–6,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lid for the 10 slot blade holder for Andis clippers: ( https://www.printables.com/model/208188-clipper-blades-holder-pet-grooming-barbers-stylist/files ). For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. (T blades…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Print two of these for the back of a profile Sim Rig. It has two M8 holes in the center of each tail pipe to bolt up to the profile with. Print instructions Using Jet Black and then switching over to Pearl Mouse.
Wydruk około 22,23 €–27,17 € nettoWstępna wycena jednego wariantu
Little Green Army Women : Explosive Ordnance Disposal (EOD) Specialists
Wydruk około 2,56 €–3,12 € nettoWstępna wycena jednego wariantu
⚫ Halloween Ghosts ⚫ I haven't released any Halloween decor in 2 years. So I decided to make more ghosts with more faces for you to choose from. And you can also change the color of the face. I hope you like the model! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
Beasts axe. Full Beast Model Found Here. https://www.printables.com/model/823218-beast-beauty-and-the-beast
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Money Tic Tac Toe This version of Tic Tac Toe, aims to introduce a more exciting component in the challenge of winning. It can be played with Tokens/coins of Dollar (black) and Euro (orange), created for this purpose. After the end of the…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Test your bridging/cooling settings! Check if your bed adhesion is good enough for small footprint parts. Prints in minutes and uses less than 1 gram of filament. Category: 3D Printing Tests
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
First layer must be calibrated good for the link to work. The T-Part can rotate, but is sometimes stuck on the first layer. Just cut it free carefully. Uses Space Shuttle model from Space Race Chess Set by WillisMakerBot and Cufflink base…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
This rotational hook aims to bring new functionality to otherwise often unused parts of our homes and workshops. As stairs typically have vertical posts and are often located near an entrance, I see an opportunity to improve the…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Hello, I have for you Footprints for RC car RMT T98 Land Rover Defender 1:10, 1:12. Footprints have a place for one canister on each side. The canister is also included, which is in the picture. The footprints are slide-on to hold, no…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
First one milimeter print by transparent filament. Second milimeter print with black or white filament.
Wydruk około 0,81 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ich brauchte eine einfache Beschriftung für meine Malm Kommoden von Ikea. Breit 80mm, Hoch 44,6 und Tief 27,5. Schriftfeld Abmessung exakt 80mm Breit und 20 mm Hoch ich hab es in der höhe auf 19 mm geschnitten über likes makes und…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
stick some double-sided tape between the joystick rod and the shift knob to prevent it from rotating. https://www.printables.com/de/model/530160-button-box-for-simulater-ets2-pc I would be very happy about a Make, Like or Share! Happy…
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
Funktionstest für die Prusa MMU
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ztratil jsem originální nástroj pro otevírání víčka bateriového prostoru vysílače cyklocomputeru Sigma BC 12.12 STS. Tato jednoduchá pomůcka ho nahradí. Do otvorů je třeba nalisovat (vtlačit) ocelový hřebíček nebo v mém případě PIN, který…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Der Trenner teilt eine Ikea Obstschale in 4 verschidene bereiche auf, damit das Obst sich nicht berührt
Wydruk około 31,03 €–37,93 € nettoWstępna wycena jednego wariantu
I really like my Secretlab Titan 2020, but ever since I started playing guitar, the armrests began to get in the way. I wanted to find a way to make them foldable for practice sessions, while still keeping them usable for work. My main…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Stretchy Springy Ghost Toys STL files included for three ghosts: (1)Big Ghost (2)Medium Ghost (3)Baby Ghost Dimensions of Big Ghost: 3 in. x 2.5 in. Dimensions of Medium Ghost: 2.5 in. x 1.5 in. Dimensions of Baby Ghost: 1.5 in.x 1.25in.…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
After the success of the Ghost Booh for Halloween 2022 https://www.printables.com/fr/model/291519-ghost-booh You will love The Ghosts Booh crocheted for this Halloween 2023 ! This time 2 different versions : With or without a smile And of…
8Bit PAC-MAN's ghosts are back as a decoration (and/or light) for your computer desk or the shelf next to it. Easy to print and colorful brings back memories from that golden age where the video games are start to rule the world. Its easy…
Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths. Modular, very easy to print, this one requires no supports at all!!…
Inspired by "Ghost by Desktop_Makes" wonderful ghost, here are 13 Halloween Ghost decorations that contain an LED tea light in the base. Print Settings Printer: Troodon Rafts: No Supports: No Resolution: 0.3 Infill: doesn't matter…
created 2 lego ghosts (2588 and 10173) 1:1 scale intended to be printed for larger minifigures. Accessories made from scratch and work just like the real deal. I have provided both a split and full version in case your 3d printer can…
Build your own little ghost crowd! This collection includes nine draped-sheet ghosts, each with a different expression, from a cheerful smile and heart-shaped eyes to an angry glare and a dramatic scream. Display them on a shelf, decorate…
Cat and dog ghosts for Halloween decoration. Can be illuminated with LED tealights or using glow in the dark filament.
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
The chests from Factorio are ready to be printed. Chests share the same scale as all other official Factorio models. You can find here all shapes of chests in opened and closed variants. The chest can stand alone or could be glued onto an…
This is a Version of cncmodels4you 's hogwarts house crests found on Thingiverse https://www.thingiverse.com/thing:4541930/files I painted them in Prusaslicer with a lot of detail.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PEACE GHOST (THE FRIENDLY…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
Introducing the ultimate filament test swatch! This little print covers all the basics for printer testing, as well as being a convenient filament test swatch, all with a place for a label and hole for a keyring. The label is sized for a…
In case you print several of these filament swatches , you might need a storage solution. Here is a configurable one. You can even add little pegboard nubs to fix your swatches to a p-slot type pegboard. This box is based on the…
Źródło oznaczyło ten model jako treść 18+.
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
A fruit bowl in Voronoi design that can be printed in any size by changing the scale. Eine Obstschale im Voronoi Design die durch Änderung des Maßstabs in beliebige Größen gedruckt werden kann.
Zigarettenboxen mit verschiedenen Stückzahlen für Selbststopfer. Unterteil gedruckt aus ASA, Oberteil (Deckel( gedruckt aus TPU.
"Ghosts" Cookie Cutter set - create multiple variants of ghosts Suitable also for making linzer cookies. Model contains 2 cookie cutters in shape of ghost 7 cutters for eyes 7 cutters for mouth Parameters: Ghost Cutter 1 - 62mm x 70mm x…
Es ist ein Modell nach einem Schwertes aus Genshin Inpact. Das 3D Modell würde für ein Cosplay nach Bildern erstellt. Die Einzelteile passen auf eine Druckfläche von 270x200. Die Gesamtdatei kann aber auch selber in Teile zerlegt werden…
Rear and front body post in different lengths for Tamiya TT02. When I completly finish scad file, I will put it here. So you can then create your own variation. 4.7.2025 : added custom lenght (hcl22.5) variant as requested (This 3D model…
F3Z and STEP files
The divine beasts from Zelda Breath of the Wild. This was one of the very first projects I got into on my 3D printing journey, so excuse the messy models.
Great to hang on backpacks and keys for a fun seasonal accessory. STL & 3mf files included Keychain with clips: https://amzn.to/45NMF2P As an Amazon Associate I earn from qualifying purchases. Print settings 3mf files with these settings…
Here is my Boba Fresh/Re Armoured/Post Sarlacc Helmet. It's designed on the Side show helmet with the smaller turn signals. It is sized quite small at 100% so i'd suggest going to 103-105 for a normal sized head and 108 for larger sized…
Here's a tiny pergola for your climbing plants! Provide succulent shade for your succulents! This version prints faster than my original model because the four corner posts print horizontally instead of vertically, and that means that the…
I modeled this ghost from scratch using the original planter as a reference. The thinner walled models lower print time dramatically! Made the eyes a bit shallower to minimize the overhang. Included a solid model for vase mode prints!…
A few different stringing test. Because models are different so this will help to test stinging. They can be used for any type of filament.
We are currently building two armies for playing OnePageRules: Age of Fantasy. There are a lot of models available. However, I wasn't able to find fitting proxies for everything. So, this is my take on the 'Ghost Swarms'. Six small ghosts…
This set includes the crests of all the clubs in the 2024/25 season of the English Premier League. The individual color layers are designed so that all the crests can be easily scaled in the slicer. At 100% scaling, the crest length or…
Five statues of well-known communist leaders from history. Happy printing :) Mao Zedong, Vladimir Lenin, Joseph Stalin, Karl Marx, Friedrich Engels
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a revision of ModelStation's Space Shuttle model, with most of the major components fixed to be properly manifold and normals corrected (according to both Blender and Slic3r) where needed. I also took the time to un-triangulate…
This is a print test for bolt threads created and modified in Fusion 360. I needed a more consistent way to add threads to my projects - I used these test prints to play around with altering the standard threads generated in Fusion 360 to…
PLA 0.2mm. Numbers were printed without top and bottom layers with 25% honeycomb infill. UPDATE - 01.02.2023. 1. Following suggestions of Chiefton I added "0" and additional base for two digit numbers. 2. Original base is now 0.2mm higher.
Update vom 01.08.2024: Größe “S” hinzugefügt. _________________________________________________________________________ Diese Füße sind für Blumenkübel gedacht, um im Winter Frostschutz zu bieten. Im Sommer helfen sie Staunässe zu…
Three scary ghosts for you halloween decoration purposes.
Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…
A 3d printed scaper's tool is a handy device for aquascaping enthusiasts who want to create and maintain beautiful underwater landscapes in their aquariums. It also works great as a scraper. The design of the scaper's tool is parametric,…
Labists ET4 firmware!! Was a pain to find, had to go to Facebook and message a support guy. So here it is!! https://drive.google.com/file/d/1wXhCY1h7tXundF53bnfL9ESNWKrbd4Bc/view?usp=sharing Category: 3D Printer Accessories
I needed a variety of Z height adjustment tests. So I created a variety of heights (.15, .20, and .25 mm) and a few different types including 140mm square and circular prints. This should let you visually asses your Z axis height. In my…
Hogwarts house crests turned into keychains. All keychains were printed with multiple layer color swaps, but can be printed without any color swaps. The color swaps are saved in the .3mf file, but if you are completing manual layer…
I suspect they are rubber in the real aeroplane, but you're probably not going to actually put your feet on them. Printed in matte grey PLA. I used 50% infill to give them a feeling of solidity, but could be as low as 10% to save…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
RC generic body posts, 4 different lengths, 8mm diameter (quite large), fairly sturdy. The title sums it up mostly. 92mm, 76mm, 55mm and 45mm, should be generic enough to use anywhere where the body post doesn't have to slot into any…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This model is simply 2 different models assembled in Orca Studio. I wanted stackable sanding disc holders, but I always wanted some guiding posts so I could press the sander down onto the discs and end up with aligned vents. For this…
Intro A smarter, more sustainable bed scraper built to last longer and reduce waste. This 4-sided design gives you four fresh edges — flip it as soon as one side wears down, extending the life of the tool and keeping it effective longer…
Alaska, USA (AK) Topographic Relief Map with Rivers and Coastal Waters Alaska, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Print with supports (all models) in PETG or PLA. If you really want the joints to last a while, Print everything in PETG. I printed the Torso and fists in PLA and the limb connectors in PETG. Update: added corrupted version, enjoy!
Two variants. Detailed and simple.
NASA's Space Transportation System (STS, AKA Space Shuttle), modeled in 3DS MAX. Modeled in one day as a demonstration for a class I taught.
I couldn't find any commercially licensed dummy 13 chests with breasts, so I sculpted some in Blender. 3 bust sizes available. Printable without supports by placing the shoulders on the build plate. For best results, use the corresponding…
English Introduction: This 3D print template allows you to create a scraper with a plastic blade that won't damage your print bed. The plastic blades are printed with a 0.2mm nozzle, and it's recommended to use the provided print profile.…
Hope the 8th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.8 - Front mudguard + seat od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
This is a multicolor Pac-Man themed planter designed to hold small plants, like small cacti.The intended presentation is like in the first photo, with a planter ghost following Pac-Man which has a coin in front of him and follows a scared…
Check out our latest version at www.asana-dental.com Dentists are among the most vulnerable group of the population due to disease infections. The main reason for this is the exposure to infectious aerosol, which arises when drilling…
My takes on the creatures from Ghosts of Saltmarsh are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the…
a benchy heavily modified to be a cross between a pirates ship and a ghost ship
Floating ghost tensegrity ornament Two versions one with Woooooo and one with Boooooo When printing use the 0.3mm layer height and make sure ‘detect thin walls’ is checked. When sliced you should be able to see the single strands of…
This is a carefully curated remix to replace the cardboard standees in the hidden movement boardgame Beast ( https://boardgamegeek.com/boardgame/281549/beast ). If you're wanting Watchtowers for this game please check out my other remix…
