323 modeli
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Wydruk około 13,60 €–16,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Wydruk około 11,13 €–13,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder for Wera stubby bottle opener
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Tool holder that fits a Wera Stubby
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Hey team, I've put together a simple, “stumpy” half inch socket wrench to help people get a socket into those hard to reach places in engine bays. In my case I had to remove a 12mm bolt from the rear intake of an R32 Nissan Skyline GTR.…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Snap-On TK72 Stubby Ratchet 1/4" Drive Handle (vert-print) I picked up this new stubby 1/4" Snap-On Ratchet (model TK72) from my local Snap-On dealer. I like the small size, but wanted something to help identify it in my toolbox, and keep…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
A little tool holder that fits for a Wera Stubby.
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updates: 12-11-2023 - Added size 5,6,8 and 10. 12-11-2023 - Added Imperial sizes from 0.05in up to 9/64 in 13-11-2023 - removed 10mm because it was too weak. Because of multiple requests i have now made a stubby version of the allen key…
I remixed the original model merely be shortening the middle of the column. The top and bottom remained proportional and in their original shapes. The result is a short, stubby column that I printed for use as a display stand. I printed…
Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…
This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…
Description: This bit tool is so compact that it can be used in the tightest corners. There’s never too little space for working with it. It is designed for a hex bit with a width of 6.3 mm (approximately 0.24 inches). According to…
Vertical grip that mounts to mlok rails. Stubby version included. Feel free to comment or message me if you need any help!
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Stubby grip based on the worker angled grip. use 30mm M4 bolt and two nuts. should work with any picatinny rail.
Wanted a Stubby Nozzle for my Makita Blower. Found some on Etsy but with Shipping, Taxes and the Price... Its by far not Perfect…
Ender 3 V3 SE/KE Stubby Spool Holder The top mounted spool on the Ender 3 V3 SE/KE can create a lot of ringing and general instability. Most people don't use the full Z-range of their machine, and this spool mount takes advantage of that…
None of the battery holders available met my needs so I designed one for myself. The screw holes accept a #10 self tapping hex head and do not interfere with the battery slotting into the holder. No supports needed. I also shrank the…
This a a stubby nozzle with a 70mm opening for EGO branded leaf blowers. This was specifically designed for the LB7650 blower but may fit other models as well (confirmed the fit works on a LB5300 as well). The design incorporates crush…
I needed a shorter nozzle for drying my car after washes and there was nothing already available. I am no CAD pro and used tinkercad for this, so the resolution isn't amazing, however it seals perfectly fine and works great for me. I…
Created a new case to house both the stubby and the standard LTT Screwdriver together with up to 36 extra bits. I might make a bit holder magnet version like my other case down the line but it would end up way too bulky for me to put in…
Remix of Alexander Þór's M12 Gland mount , with a PG7 thread rather than M12 (allowing a smaller strain relief gland to be used). Also adds a slot to slide the cables in through. This can be secured with an 8mm M3 SHCS screw and heatset…
I really wanted to find a high quality poseable Short Stubby model from NieR: Automata, and when I couldn't find anything that really ticked all the boxes, I decided to make one myself. This kit will require some post processing and a…
This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his wrench and didn't want to wait for the entire thing to print each time (all the important stuff is in the…
Milwaukee packout insert to hold 43pc socket set as well as m18 stubby 3/8 impact with 5.0 battery. Sockets are a tight fit to hold them in place in transport. left a spot for you to add your own text
Stubby Nozzle for DeWalt DCBL722 Cordless Leaf Blower Snaps in with ease and is great for drying cars/grilles! Has held up with moderate use Designed in Fusion 360 model file availiable for remix etc. Printed on Ender 3 S1 with Hatchbox…
This nozzle fits the Milwaukee M18 (2 battery) (2824-20) blower.
Remix of my own file. Made it smaller. Scale by 2450% for you metric folk. Category: Sport & Outdoors
Quick simple wrench organizer for the tiny Craftsman stubby sets. Same part works for both standard and metric.
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…
Recommended printing: PETG, 3 walls, 15% gyroid infill
I adjusted the original model to make it as stubby as possible. I also removed all unsupported overhangs around the latch area. I also made the latch easier to press by making it larger. I also made the tip the same diameter as the…
The original mini hex bit driver was both good, and bad. https://www.thingiverse.com/thing:4040548 The good part was the ridges were nicely designed, and gave the handle a lot of grip. It was also a fun idea to have the stubby pop out of…
Stubby Handle for Hex 1/4 Bit Driver Screwdriver - Mini manico porta inserti esagonali Available for: 10 - 25mm bit 15/10/2025 Update. Added REV1 versions Bottom Chamfer: Added to enhance print bed surface quality. Bit Socket Tolerance:…
stubby grip that uses m3 hardware. the picatinny mount and the grip are sepperate parts so if you break the mount you dont have to reprint the whole grip, as is the case with other 3d printed grips I have used.
A simple Stubby Screwdriver with a length of 60mm (without bit extension). The only thing you need is a simple bit extension, as shown in the picture (10mm outer diameter).
Print this handle for your Games Workshop metal mold line remover tool to make it actually usable. No supports needed. An M3 nut and M3x10 can be used to secure the metal piece to the 3D printed handle. Stl file includes discs either end…
A remix to shorten the brush arm and have an inset for the A1 brush pad. The shortened brush arm gives better clearance for build plates that have alignment corner pieces. The inset gives stability to the brush when cleaning the nozzle.…
A (more or less) ergonomic stubby screwdriver handle, designed to work with generic 6.35 mm (= ¼") magnetic hex bit holders of 50 mm overall length. The design incorporates anti-roll elements, as well as a top access hole to push out the…
Designed to support a stowed LTT Stubby Screwdriver with or without a bit inserted in the shaft.
Having a big success with my Ratchet toothpaste tube squeezer I though I'd dip my toes in something more complex. And what else should I tinker with if not with Ratchet screwdrivers. So I did. And it was a challenge, let me tell you.…
To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/143533#profileId-167268 I made this model as i was getting really frustrated with all the Hex bit holders i was printing off from other peoples…
Not my design, Fusion has McMaster-Carr components that can be inserted. I found this stubby screwdriver there. I removed the shaft and extruded a hex with relieved corners. It is a tight press fit, insert an adapter of your choosing or…
Remix from https://www.thingiverse.com/thing:4841242 Wall mount for the nozzle scaled at 101.5% (the orginal design is too small) Category: Tool Holders & Boxes
A short, stubby 810 drip tip. Comes in two variants, a regular one and one with a "mesh screen" in the bottom to filter out ejuice “spit”. Fits well on my Geek Vape Z tank. You may have to scale it up or down 1% to get a perfect fit. I…
A remixed of 1x4 grid for stubby wrenches. a remixed of DesignTheEverything design please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Remix of my original model. Wanted something smaller, more palm-filling. That's what she said. Category: Sport & Outdoors
Size isn't perfect I had to heat up my bit with a lighter so it might take a few shots if you want it hot-swapable with other bits, basically I scaled down the old screwdriver handle to accomodate 4mm bits, when I did a numerical…
To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170238#profileId-186889 Follow up and improvement on my prior Stubby Hex Bit Driver with additional features…
This gridfinity bin is designed to hold a Wera Stubby Bitholding screwdriver with article no. 811/1. The bin should hold any other bitholding screwdriver as long as the center bitholding piece has a max. diameter of 10.5mm and is max.…
Stubby attachment for for EGO LB5800 (580 CFM) Leaf Blower. Includes crush ribs on the interior for a more flexible fit and a twist lock mechanism. Useful for blowing off car, gutters, etc. Depending on your printer's settings and…
Prints vertically on the exhaust side without supports.
Short, stubby and hexy suppressor. Bit of a play around in Fusion, someone might want it :) 14mm ccw thread. Print without supports at whatever settings you fancy, rafts not required.
Mix of two models to add ratcheting mechanism from @Martin Rigatoni to LTT Stubby Screwdriver from @CheffHD. You will need two rachets, everything else is by one piece. Be careful with supports in handle - there is a tiny guide slots on…
The “Stubby”, the shortest connector for @PeterH CAMLOCK System i could make. You could probably cut it a few mm shorter by removing the flange at the top if you want. Made to fit the dust port of a Makita DRT50Z trim router. Should fit…
Picking up ice cubes with my hand leads to me dropping them all over the place, but all the ice scoops I looked at were to big to conveniently dig into the ice bin in my new refrigerator. I designed this one to fit in the bin by making…
Shallow hole - 8mm deep Deep hole - 20mm deep Magnetic Bit Holder - 42mm deep
This screwdriver case can hold a staggering 72 LTT "shorty" bits. The key eye amount you saw the title, the title is not clickbait. You can fit both the original and the "Stubby" screwdriver in one case. All color variants of the "Stubby"…
Was after a small footprint Gridfinity organiser for my stubby spanner set from Super Cheap Auto. The holder itself fits in a 2x1 grid space, printed in just over 30 minutes on my P1S. Have included a step file for making any tweaks.…
Small and compact 1/4 inch (6,35mm) stubby hex-bit driver
GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/595624 In this alternative version the stubby body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…
General After some experiments with all this 3 projects I came out with one remix to join best of them all in one. This remix includes new type of a bit holder and body to build a ratchet version as well as a regular one. None of work is…
A stubby/wide nozzle for a Dewalt DCM562 leaf blower, designed to help shed water off my car post washing. Print in vertical orientation I did have a few issues with model warping/lifting off bed so had to add a brim and slow speed down a…
I designed this stubby nozzle for my Ozito blower so I could use it to blow the water off my car after washing it. It's for the dual battery Ozito Jet Blower:…
This is a modified version of Model #2554-20 M12 3/8" Stubby Impact originally designed by tonsoffun2325X model. This model is pretty easy to print, so long as you enable supports for the overhanging mounting plate. I used PLA with 35%…
A remixed of 1x6 grid for 16 stubby wrenches. Fits metric and in set. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Gridfinity (1x2) 7 slots stubby wrenches
64mm Extra stubby barrel
This is a snap-on style stubbier stubby screwdriver handle. It's shorter than the snap on stubby, and they don't make one like this. I use it for tighter spaces when a normal stubby screwdriver won't fit. I downloaded that file to Blender…
Other knurled knobs I've seen for the Prusa Mini have all been either too wide or too tall, so a remix was due. It's not too big, not too small. This one's just right. Dimensions measure 22mm wide x 11mm tall STEP, F3D & STL files provided
This is meant to short and sturdy handguard, safe to use vertical foregrips. Design inspired by m23 prototypes. Half mlok slots are good for most of attachments, but not all. Rule of thumb is, if an attachment can move half step on m-lok…
This is a Small siren Thunderbolt it is designed for kids, which is why it has rounded corners and a small handle it gives the print a bit more durability than some of the other ones I have found online. The handle prints with supports,…
M3 heated inserts can be placed on any of the 3.5 inch-equivalent screw holes.
GENERAL INFO I separated into 2 version: FANCY → https://www.printables.com/model/595619 Custom color accent ring and spinning end cap SIMPLE (This) In this alternative version the screwdriver body is a single color (You can still do…
Simple, stubby, cut to length if needed. Requires x2 m5x8mm screws and x2 M5 MLok t-nuts. Minimal organic support needed to support inner geometry. Print solid. Fuzzy skin is nice.
This is a complete set of 3D‑printed Stubby Hex Bit Drivers, designed for makers who want a compact, ergonomic, and reliable tool for everyday use. Each driver features a standard 1/4'' hex socket, making it compatible with all common hex…
Printed in PLA 0.3mm layer height, 60% triangles infill. The bit extender is press fitted with a clamp. The ring is just a small rubber band.
Prints well with: 0.2mm layer height 100%infill
As I searched around and could not find something already existing which fits my needs, I created that holder for the LTT Stubby Screwdriver – Linus Tech Tips Store (lttstore.com) and some additional bits, because I was also tired of…
I tried printing the other version on here which is friction fit and had crush ribs. It worked for a bout a total of 3 seconds in turbo mode before it flew off. These blowers really put some power down especially the 765 model that I…
Maybe you have already seen my Magnetic Bit Driver Handle . Now here is an alternative version: The Stubby Magnetic Bit Driver Handle Features: Can be used with every 1/4'' (6.35mm) standard bit Bits are hold in place by a Ø4x2mm magnet…
A gridfinity bin for the Klein Tool Stubby screwdriver. 3x1x4 gridfinity bin
This is a 2x1x3 Gridfinity bin for the Wera ratcheting stubby screwdriver.
Designed a TPU bumper for www.printables.com/model/906364-milwaukee-m18-stubby-nozzle-fuel-blower-model-3017 stubby nozzle. Printed in TPU with 100% fill and no supports bottom down. This is for the Milwaukee 3017-20 blower (2024). The…
Combined the Magnet and Hook version into one and made it smaller.
For an 11 Piece Stubby Wrench set. Remix of https://www.thingiverse.com/thing:2839603 Updated thanks to some feedback i got from @Littlefieldpc. One of the end peices was not square down on the buildplate causing printing support issues.…
Mixed together the Stubby PG7 Cable Gland Mount by Tom Whitwell and Voron stealthburner umbilicus and chamber sensor mount by IconoclastXYZ .
Small handheld screwdriver. Fits standard screwdriver bit. Quick print
a compact stubby spanner rack, designed for tool box or wall mounted deployment , it has room for 4 10mm x 3mm magnets to keep it anchored in the tool box, or 2 screw holes for wall mounted. It will hold 10mm, 11mm, 12mm, 13mm, 14mm,…
Built this in Fusion 360. Created slot in the bottom to add a magnet (10mm*100mm) .
This is my 2nd design of Lelit Elizabeth steam knob cover. Check my 1st design here . I feel this type of design is more comfortable to grab and turn compare to my 1st model. The cover is inserted from the back of the original knob and…
I F**KED UP THE SCALE. MULTIPLY SCALE BY 10. A laser scan of my M12 Stubby Impact.
Remix of DeWalt Stubby Nozzle for DCBL722
This soft tip should be printed in TPU and will fit snuggly over the excellent short spout model provided by @gpace08 here . Use-case for this is for when you're using this shorter spout to dry off vehicles - the TPU soft tip adds a small…
3 nozzle fitment. 1" inner with for stubby swivel handle from Harbor Freight. Part in pictures is made from PLA. Can be printed in PETG or ABS. 15% infill. Nozzles have a tight fit and under testing have not fallen out. If the front guard…
This stubby round ice scraper should be about 25-50% faster to print vs comparable scrapers with the same performance. If not better performance thanks to its sharp edge and ergonomic design. Print Settings Rafts: No Supports: No…
A stylish beer stubby holder for printing in vase mode (single wall without a seam) that keeps your beer cold and prevents a lot of condensation forming on the bottle in humid environments (perfect for the tropics). It's sized for a…
I recently printed a few of the excellent Lynx nerf dart blasters by Orion Blasters. These are a pump action spring-air blaster, with a 1913 style rail on the pump handle, to which the user should attach the foregrip of their choice. I…
Simple and small wall-mountable holder for Wera Stubby * Screwdrivers. Prints easily without any supports. * = Amazon Affiliate Links
