Liczymy pasujące modele…
Hello, I have for you Footprints for RC car RMT T98 Land Rover Defender 1:10, 1:12. Footprints have a place for one canister on each side. The canister is also included, which is in the picture. The footprints are slide-on to hold, no…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
a model of the T95 tank, its really hard to print, so its better to make it smaller. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 30% Category: Vehicles
Based on a 3d model. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.06 Infill: 25% Filament: --- PLA Black Category: Vehicles
This is an XT30 / XT60 / XT90 Cap, it fits over the female side (battery side) of lipo batteries. It has a small lip on the bottom to make it easier to pull apart. Should fit snug. I use these to determine if the battery is charged or…
XT60/XT90 connectors are often used from model builders to connect LiPo batteries to the receiver system, electric engines or the control units and starter motors of jet-engines. With this tool the wires are aligned with the connectors…
Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2
This is a holder for xt90 plugs The plug is inserted from the front and can be glued in One version is with hole, but it saves only 1 gram i use the holder in a model airplane Category: R/C Vehicles
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
Projetei usando freecad, pente para corte de cabelo com altura de 3mm, para máquinas t9. 28/10/23 adicionado .step 28/10/23 adicionado .FCStd 31/10/23 adicionado versão com otimização de suporte e suavização de cantos .stl
Utilizes ribs on XT90 connector for fixation. You'd need to apply some force to press in XT90 into this panel mount. I recommend to use vice. Printed in PETG, 0.4mm nozzle, 0.3mm layer M3 Conical - conical head bolt/screw Plain - plain…
I wanted a screw-on xt90 panel mount but couldn't find any free models so I made my own instead of paying the eBay tax(eff those bitches). The idea is that as you screw the nut on the mount clamps onto the connector more but that doesn't…
XT90 Charged/discharged battery indicator protector caps I print 3 colours and use the blue for battery packs at storage charge. I've only printed in TPU Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Alientek T90B Rugged Case I was in search of a carry case for my T90B and couldn't find one but very much liked the design by @EddieCoast for the Pinecil V2.| After taking inspiration from him and several others (see the remix links), I…
Classic Playcards deck of 54 with options CARDS Standard 52-card pack, ranking AKQJT98765432 + joker Diamonds Hearts Clups Spades 2 3 4 5 6 7 8 9 10 Jack Queen King Ace Joker Use your cards wherever you want since they are waterproof when…
Going for a walk with the kid(s) is nice. Being able to bring your morningcoffe or tee with you, priceless! The cupholder is designed in two pieces: The holder - clips in place and secures itself on the frame with a hook on the existing…
xt90 male connector protective cap has a convenient hole to be able to tie it to the wire so you will not lose it As connectors are slightly different, you may want to scale a bit (0.5-1%) to fit your exact xt90 male plug
Remix model from m_a_CAR Versions for 6.5, 7, 7.5, 8, 9, 10mm guards. Printed with PLA due to layer adhesion issues with my PETG Filament. So I designed versions with easier layer adhesion by adding a 0.25mm layer. However the model…
Tight fit for both M an F part.
Here you find a few safety caps for the XT-battery-connectors. All of them are printed with TPU (Shore 95 or 90). You need a cable tie to attach it to the cable. Happy printing!
Come support these models over on Patreon Buy my time, Not my models. Easy to print T28 super heavy tank "Doom Turtle", 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. This is a…
I haven't printed this model yet. I'll update this section as soon as I print/got this printed. Length: 250mm Height: 50mm
This is the rear air filter housing that should fit K2 and later CT90's and maybe CT110's.
RST99 – 3D Printed SFF ITX PC Case A compact, fully 3D-printable Small Form Factor (SFF) PC case designed for high-performance hardware in a minimal footprint of just 9.9L. RST99 compatibility: Mini-ITX motherboard SFX PSU 240 or 120mm…
Pretty much self-explanatory. Attach to the side of a Yaesu FT991 to protect the knobs and rear panel connectors and give the radio a more solid footing. Uses four (4) 4mm x 20mm flat head screws. If you have a large enough printer, print…
Would recommend to print in PETG as PLA tends to creep and loose the clamping power. At least 2 walls. SUPPORT NEEDED! Post your print and recommend any changes that you see fit
Simple XT90 connector panel mount bracket. The connector is soldered to a PCB which was made on a small CNC machine. Parts were printed in PETG. If you build this please share a make, you can also tag me on instagram @_cybermouse_
I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…
I modified this storage case for the Alientek T90B soldering iron and its accessories to better suit my own needs. Some of the original compartments and features were not useful for my setup, so I redesigned and replaced them with…
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
XT90 male and female connector covers with loop
Mounts a Retevis RT95 25 watt Dual Band VHF/UHF radio in a metal 50 caliber ammo box with batteries and an antenna. It is a totally self-contained high watt go-kit. Features include: Fits four 6Ah LiFePo batteries for a total of 24Ah of…
This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…
Used to plug the male side of an xt90 connector. Includes grip to more easily pull the plug out too. No supports or anything needed, tolerances are +- 0.2mm but model has been tested and can accommodate a lot of variation and still…
All printable parts for your Prusa Pro HT90. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: STRENGTH profile Filament: PC Blend 25% Grid infill ** Note that print settings are…
Would recommend to print in PETG as PLA tends to creep and loose the clamping power. At least 2 walls. SUPPORT NEEDED! Post your print and recommend any changes that you see fit
I needed a T90 Torx tool to change the desiccant cartridge on a Smart Fortwo (451) EV battery. It's a seldom used tool because the desiccant cartridge is replaced every two years. The German made T90 Torx on McMaster is $100+ and I don't…
Just a fun thing for the gun. With rail for attachments. Print Settings Resolution: 0,16 Infill: 10 Category: Other
Stand and enclosed fan shroud for Inovato Quadra. Air intake is from the slotted ports on the sides. Bottom hole is to allow for tree supports for ran roof. No other supports required if you know you can handle the curved overhangs on the…
The model exists of two pieces. Forst print the clamp on mount. See print orientation in picture 3. Next print the cup holder. It is important to add a pause to the gcode before printing the ceiling of the cup holder slot. See picture 2.…
Simple wall mounted holder for the Tefal DT9100 steamer. Would probably also fit similar Tefal steamers. Remember to mirror the part if you want the steamer to face the other way. IMPORTANT: The pictures and the presliced gcode is…
The HT90 has a very disappointing lack of print profile presets for the High-Temp toolhead. This led me to create what was missing to make it easier for my co-workers to quickly start prints. PEEK profiles are also lacking as there is…
This is an air intake boot for a CT90 K0 printed using TPU
This is a replacement for the DT990 slider housing that I modeled after mine cracked. Beyerdynamic offer a replacement part for sale but I didnt want to pay as it was simple enough to model. Print both sides with the flat face down…
This model was directly designed from scratch and is compatible with the dummy 13 We're finally in beta! Most problems are fixed, but there might still be some minor bugs. Disclaimer Please keep in mind that this model is still in beta…
These are Fender Plugs that can be used on a CT90 and printed using TPU
This carb to air filter holder boot is designed to be used with Honda CT90K1's that have incorporated a newer 2 screw carb with an intake opening of approximately 32mm. This has been printed with TPU which provides enough flexibility to…
3d printed DIN rail mount for Teltonika routers. Print with original orientation for maximum strength. Compatible with : TELTONIKA RUT200, RUT240, RUT241, RUT300, RUT360, RUT901, RUT950, RUT951, RUT955, RUT956, RUTX08, RUTX09, RUTX10,…
Simple box with sliding lid. No supports. Model name optional, but can be printed with a different colour.
Layer height 0.2mm Infill density 10% Gyroid infill Normal supports / snug / manually set over hangs as shown in last picture 3mf file contains a modifier to fuzzy skin, I find that it helps keep the gauge in place and looks nice, can…
Alternative, non-mobile, mounting for radios like the RT95 and AT778UV. Handles make for easier handling of non permanently mounted radios and add a measure of front panel protection. They also provide clearance for bottom mounted…
This carb to air filter holder boot is designed to be used with Honda CT90K1's that have a stock 4 screw carb with an intake opening of approximately 36mm. This has been printed with TPU which provides enough flexibility to allow it to be…
A 3D Printed Seal for a Honda CT90 K2 and Later Air Filter Housing
The 3D design of an RT90 tent peg combines robustness, lightness, and 3D printing ease to offer a reliable and practical solution for your outdoor adventures. This peg has been meticulously designed to withstand the most challenging…
ARTE&DISIGN GT92 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Couldn't find an Amass XT90 panel mount that had all my requirements so I designed this based on ideas from my previous XT60 remix. My aims for this design: No support needed. Can be used for both Male and Female connector. Can be removed…
Remixed the XT60 version - I couldn't get it to just scale in my slicer and fit appropriately, and the tether was coming out only one layer thick. The opening was enlarged for an XT90 female connector, and the tether & walls were…
This is a hub for connecting multiple batteries to an inverter to power your appliances and solar/off grid energy projects. Need a printer with large print bed, something like 300x300mm.
Description: Upgrade your Peugeot 308's interior functionality with this custom-designed 3D-printed cupholder adaptor. Say goodbye to the inconvenience of having just one cupholder, and welcome a sleek solution that seamlessly integrates…
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
Print the template with organics supports. PLA is good. First weld the two sockets with the template. The best is to use a rigid copper wire. Print the cover in TPU or VarioshoreTPU and glue it. You can have the XT90 to XT60 here :…
simply stick the holder to the rear of your Mac with double side, insert the T9 Samsung ssd and connect!
A simple KlickFast stud to fit Motorola T92 H2O handheld PMR radios. Fit confirmed with official Peter Jones KlickFast docks. Print settings Orientation: 90º rotation (as screenshot) Material: PETG/ASA (for strength) Nozzle size: 0.6mm…
A printsheet holder for Prusa Pro HT90. Up to six printsheets. On the picture: printed with black PETG, 15% Infill
This TPU front-end camera mount for the Rekon 10 Pro frame allows you to mount an O3 or O4 camera far enough forward, thereby removing propellers from view. It also provides an integrated finger mount, allowing you to attach an action…
I slightly increased the width to fit the multimeter in the rubber case and made holes for compatibility with honeycomb storage wall. Also I increased the height for the probes holder. You'll need to print two M3 inserts (included in the…
I created a case for these inexpensive reflashed TV boxes, to use as a replacement for unobtainable Raspberry Pis. The only parts needed are a 4010 5VDC fan and a 40mm heatsink. With this setup, the CPU never gets above 70 degrees C or…
A tool to help you align the T9 key when replacing a FEP foil on your SL1S resin tank. Other than that, the #1 advise for a painless FEP replacement is: get WERA 05028032001 TX8IP screwdriver. ____________ Printable on both MSLA and FDM.…
Introduction The original was posted by me at https://www.thingiverse.com/thing:3368589 but this one is a newer one. Models In the folder ‘original’ the files for the original are found. In the folder ‘With OBD opening and cover’ a…
Motorola talkabout T92 H2O belt clip. Just replace the original black hanger with the belt clip.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 complete with doors and windows. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed for…
It's based on the chaotic lab model. But I recommend checking out the other remixes as they provide great value.
Remixed the model with these changes: Make the end larger to accommodate my 8AWG cable which seem to have thicker insulator than other 8awg. Added hex nuts on the other side Make 3 different versions for standard Amass XT90, Sparkless…
JEŠTĚ SE NA TOM PRACUJE Jedná se o odolné pouzdro pro telefon Xiaomi T9 / K20 16.4.2020 aktualizace. Pouzdro byo dokončeno osobně asi doporučuji spodní část tisknout z FLEX filamentu ale je možné použít i jiné. Použite šrouby M4x10 ane…
I designed this based on the "Mini Track Loader RC" from Zedpi. You can use the lego chain and all the other parts from Zedpi's design ( https://www.thingiverse.com/thing:1000713 ). So it is only slightly larger as the original one from…
This is a hole cap that can be used on a CT90 and printed using TPU
File redesigned to be used with the selftapping screws of the original DT990 Pro Sliders
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 front bumper. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed to install them, they…
A gasket for a CT90 with the D-shaped speedometer. I used TPU to print it. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Matter Hacker TPU Black Category: Automotive
This is a piston support tool to aid in the reassembly of a CT90 engine
Print the template with organics supports. PLA is good. First weld the two sockets with the template. The best is to use a rigid copper wire. Print the cover in TPU or VarioshoreTPU and glue it. You can have the XT60 to XT90 here :…
I created a case for these inexpensive reflashed TV boxes, to use as a replacement for unobtainable Raspberry Pis. The only parts needed are a 4010 5VDC fan and a 40mm heatsink. With this setup, the CPU never gets above 70 degrees C or…
Short and Tall Caps for use on CT90 & CT200 Speedo's printed using TPU
The "taurus pt92 stand" is a bespoke stand meticulously designed to cradle the Airsoft Taurus PT92 H.P.A pistol. This stand not only serves as a stable platform for displaying your prized possession but also accentuates the sleek design…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 rear bumper. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed to install them, they hold…
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…
I grew increasingly frustrated with the difficulty of separating two connectors, so I went online and could not find anything suitable. Thankfully, there was a model I thought was “halfway there”. Unfortunately, I was not satisfied with…
This is a Gasket that Can Be Used on a CT90 K1 Speedo printed in TPU
Hello, Welcome to my profile, full of models and miniatures :-) I have RC car RMT Land Rover T98 treads for you. They are suitable for embellishing your RC model. They are in 1:10 scale. No glue is needed to apply them, they stick to the…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Antenna for RC car RMT T98 Land Rover Defender. Antenna fits beautifully into the original body. It prints quite well I used PLA/PETG Basic material You need…
ARTE&DISIGN GT93 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Prevents the connector from filling up with crap. Print it with TPU Print instructions Category: Sport & Outdoors Summary Prevents the connector from filling up with crap. Print it with TPU
The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…
This model now includes BOTH mg90s servo and the higher operating temp FT90M servo compatibility! The MG90S mount, arms and entire .step have also been updated. The FeeTech FT90M is the same servo that is used with the Nevermore…
GEARS for plotter Hp t920 T372473 B3
This is a front air filter housing I designed for use on K2 or later Honda CT90 motorcycles. The housing is an assembly composed of the three parts I have included with this model. The upper and lower mounts slide into mating grooves that…
optimized for fdm. the model was assembled on the knee: removed small details in the air, voids were removed, tracks were strengthened. v. 2 added holder for radio, reinforcement of the front part of the track
