Stay Puff Marshmallow Man
Stay Puff Marshmallow Man.
Wydruk około 16,51 €–20,18 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2068
- Polubienia
- 379
- Ocena
- 5
Liczymy pasujące modele…
Stay Puff Marshmallow Man.
Wydruk około 16,51 €–20,18 € nettoWstępna wycena jednego wariantu
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Use color change/pause at layer Nozzle: 0.4 Layer: 0.1-0.2 (Recommended) No Supports needed Scale it as you like :)
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
HasLab Proton Pack that was released in January of 2023 came with 3 mini Stay Puft Marshmallows and 6 swappable heads. In order to display all 6, I needed 3 more bodies. I used the model from Nanotech76 to start with. I removed both the…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
Very simple design for a ring that keeps your silicone baking mats rolled up. Inner diameter: 28 mm. Print file has 3 rings in one print. No supports needed.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Just a quick and dirty Screwdriver bit holder for my Tayg TrailBox 59. It fits up to 25 bits upright plus all you need in the box. I hope you enjoy it.
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
A simple tool to get precise water levels in your Taylor K-1004 test kit comparator vials. The problem: The test kit requires filling vials to a specific line, but it's tricky to get the level exactly right - especially with the angled…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NEW Added 200mm clip arm for larger bags. Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion Updated: 04/07/2024 - added an extended version of the…
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…
Overview I always seem to lose my shirts' collar stays when doing laundry. Luckily, they are simple and fast to print! 3D printing collar stays also allows for easy customization, like the chevrons I've included on the version I printed.…
3D logo/signature of Taylor Swift , with a stand, so it can be easily placed on a shelf, table, etc. as a decoration Dimensions: ~ 200x65x11 mm (width x height x depth) - you can print any size you want I used this image to create the 3D…
Made this for a friend's Taylor-Swift-themed party. Easy print with no supports necessary. I scaled x and y up to max print volume, but set z to .75" in prusaslicer. .2mm layer black and gold filament with color change set at the start of…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
There's 2 files with filament changes at either 0.8mm or 1.6mm. This allows for a fast or strong print. For Prusa Mini owners, change the skirt distance from object from the default 2mm to 1mm to ensure no toolpath errors
Made this as a Christmas gift for my girlfriend who loves Taylor Swift. Two part kind of print, I just glued her legs to the platform when they were done. You will probably need to rotate the platform so the flat part is laying down on…
Nozzle: 0.4mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. A brim is recommended to make sure it doesn't lift Filaments Used: PLA Elegoo/Sunlu Black Transmission Distance: 0.6 PLA Elegoo Gray…
took ChrisThePropGuy's corey taylor mask and resliced it in meshmixer to be able to print it in 2 pieces as his mask stl was broken. Category: Other
Modeled after the layout of the Eras Tour Stage. Customize text with secret songs and venue. I used a color change stop on my MK4 and 3 perimeters with a 10% infill printing in PLA. Can also change the center and bottom text to be joined…
v13.1 is only available in .step. Fusion 360 keeps breaking my stl / 3mf outputs for this version, so STEPs for all. If you need an STL or 3mf I can add one, just be aware it would need to be repaired with your slicer before printing.…
Made this for my girlfriend to add a little decoration to her calendar. It is the title of the album, which the photoshoot for the calendar was done for, in a similar font as the original. The beginning swoop of the L is a little thin for…
Added the Queen name to Roger's bassdrum :D Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: SUNLU PLA Black Category: Other
Any feedback would be greatly appreciated. Nozzle 0.4mm Layer Height 0.12-0.24mm (Recommended) No supports needed Scale it as you like :)
A few notes on the profile: I separated objects by color: body parts, blue stuff, red cloths etc. the head and the hat strip are the only multicolored objects (AMS) so are on separate plates from other parts The hat strip has enabled the…
This is a very simple hinge / lid stay to keep a chest or box lid open. Split it up into objects in your slicer! I printed with PLA with 4 perimeters, 5 bottom and top layers and 20% infill.
Did anyone expect this announcement? Certainly not me! As I clown once again from my Reputation (Taylor's Version) speculation, I wanted to recreate the bookmark that will be included with the Vinyl! It's not exactly the same, since I…
Mini Stay Puft Surprised
Should print in all filament
Duck Jeep the Marshmallow Man! Is it Stay Puff or Stay Puft???
Tortured Poets Department out April 19th <3
I created large beads representing all letters (A to Z), size 60mm sided square with a 10mm hole on it. In this case it will be used on a Taylor Swift concert as decoration. The letters have also a geometry so in theory you can either…
Simply pause and swap or use a MMU/AMS to change filament.
There is a universal plate that is meant to be screwed directly into the stud or you could use double sided tape if you trust it (I don't). The plates were printed using MMU2S and placed them face down to minimize the chance of quality…
Christmas Stocking Hanger for Mantle or Shelf. Balanced to stay put on the edge without sliding off. 2 versions. one with 90 degree edges and the second with rounded edges. Print on its side. For filament with poorer adhesion I recommend…
This is excalibur from fate stay night used by Arturia, also known as Saber. It's currently cut in pieces for a 200x200x180 buildplate, but you will also find the full stl in case you want to slice it yourself. The sword has an 8mm hole…
Printed in FDM, 0.12mm with 0.25 nozzle. supports required, can be printed in one pice. Can be printed with 0.4 nozzle, but need more work to get a good surface for priming and painting Add glue to the boty and then put glitter.
ENGLISH Upgrade your backpack with this multipurpose hook designed to prevent items from slipping off your shoulder. Ideal for musicians, hikers, and daily commuters, this hook securely holds ukuleles, jackets, bags, and more in place.…
1989 (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open! I rounded the edge at the end of the mounting holes to make it more stable. I have also added additional straight…
Staying Snoopy designed with the help of AI. Prepared for handpainting.
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio 1.- Print the lines in black color. 2.- Print the cardigan (white color) changing…
A new 3D figurine generated by AI, Bibendum Chamallow (Stay Puft Marshmallow Ghosbusters). Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld…
Midnights (by Taylor Swift) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
This is my current collection of collar stays for my dress/work shirts. These are modelled from my actual collar stays that came with my work shirts which needed replacing as some broke over time and others went AWOL. I suggest printing…
Made this for a friend's Taylor Swift-themed party. Scaled up the model to max print volume for x and y, but kept z at about 0.75" to1" height. Easy color change from the guitar to signature.
Taylor Swift signature and silhouette display decoration, with an added guitar in the background. My daughter has become a “Swiftie” and was very excited about this. Changed made in this remix: Added an acoustic guitar silhouette behind…
Spotify code that takes you to the Taylor Swift home page :) I highly recommend Just using the pre-sliced models, but if you can't: Instructions: Import the code itself and then the code chain of your choice. (Note: code chain 1 is the…
For those that don't know, during The Eras Tour at some point Taylor sits on top of a wooden cabin with a moss covered roof. It looks quite similar to the small nativity set we've had for years. So naturally I made a way for Taylor to sit…
Porsche Taycan Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick…
A sleek, minimal rear mudguard designed specifically to clamp onto your bike's lower seat stays using standard zip-ties. This style of fender provides critical, close-proximity protection for lower frame linkages, suspension pivots, and…
Evermore (by Taylor Swift) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Honda jazz/fit bonnet stay clip - 2016 model Grey version is abs after 5 years use. Printed in abs/petg
I made it as a Christmas present. Printed the signature parts upside down and glued it to the base. Source of the signature: https://de.wikipedia.org/wiki/Datei:TaylorSwift_Signature.svg
Are we out of the woods yet? Good. Have yourself a merry Christmas with these twin ornaments! Two paper airplanes flying, flying… Inspired by the line in Taylor Swift’s ‘Out Of The Woods’. At 100% scale, each plane is approximately 55mm x…
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No supports needed Scale it as you like :) You can print multi color keychain with a single nozzle (use this video for reference…
This is a model that allows easy tray stacking for a StayFresh Freeze Dryer. It fits over the corners of a tray, and allows placing another tray on top. The OnShape model allows configurable spacing between trays.…
Made this for my girlfriend to add a little decoration to her calendar. It is the title of the album, which the photoshoot for the calendar was done for, in a similar font as the original. The print is a little thin to be made with a…
Stay Puft Marshmallow Man Figurine from the original Ghostbusters film.
As requested by my girlfriend, I've made some fun, easy to paint/multicolor print Taylor Swift Earrings. Not much for instructions, just print signature side up, no supports and color/paint as you like! They're fairly sizable (60 MM),…
A slightly improved version of the classic STAYHOLD nylon buckle. Fits 27mm max width straps. No-sew design allows strap loops to be threaded onto the buckle. Prints without supports. Some light assembly required! Updated 2026-09-20 Added…
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No Supports needed Scale it as you like :)
I didn't want to pay £6 for a cheep clip that someone else broke on my car. so I spent many hours designing and printing this clip to replace it. Many Hondas use this type of clip with part no.: 90672S5A003. My car is a 2007 accord.…
This is a quick model I made to celebrate TS12 "The Life of a Showgirl" coming out.
Introducing the CollarCard: three sets of collar stays in credit card format. The stays are 9, 10 & 12 mm wide.
This is a simple Connect 4 game which you can print and enjoy while staying at home. For more details you can see my video right here: https://youtu.be/ZiULWFkq_H4 The base is 200 x 142 mm (x y) and the grid is 191 x 130 mm (x z). The…
Bonnet Stay Clip Arm Rod Prop For Vauxhall Opel Combo Corsa C Meriva A Tigra
Perfect for fans of the classic movie, Halloween collectors, or anyone who loves themed 3D printed ducks. Cute, creepy, and nostalgic — a must-have tribute to one of the most famous movie monsters.
A simple logo version of Taylor Hawkins' hawk tattoo…RIP Taylor. Printed using Atomic Filament's Black Marble PLA.
MMU flat remix - Danger: Stay away from Server Room #2 from https://www.thingiverse.com/thing:4369725
This is a dual filament / colour Converse Chuck Taylor sneaker set for the very cute and popular Ghosties! model. Print Settings Print the sole in whatever filament you like and the top in perhaps some more colourful filament. I recommend…
Stay Puft Marshmallow Man from Ghostbusters Single Extruder multi-color print First layer: White Second layer: Red Third layer: Blue Fourth layer: Black
Kanshou and Bakuya from Fate Stay Night. These have not yet been printed, but you are free to download them and slice them to assemble them. The set size for the blades is around 40 centimeters, so most people won't be able to fit them in…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I recently purchased the Drill Press Sharpening System V2 kit from Taylor Tools, and realized I didn't have the time/materials to build the accompanying jig for chisel sharpening, so I modeled it up and printed it! Thanks to the Taytool…
I designed this printable chainstay protector for my Aventon Level 2 e-bike because the bike does not come with one. After just two rides, I noticed that the chain was damaging the paint on the chainstay. The Aventon Level 2 has a very…
Because I got an Just Spices advent calendar, I had to store 24 boxes of spices. I designed this to store them in the top cabinet with as little waste of space as possible. I designed this for printing with my 0.6 nozzle as I realized,…
Hueforge print of Taylor Swift's folklore album cover. Print at 0.08mm layer height, 0.16 base layer height., 100% infill. Filament Colours Used: PLA Matte Black PLA Grey PLA Light Grey PLA White Swap Instructions: Black until layer #6 at…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is a replacement lamp shade for the Walmart “Mainstays” brand floor lamp. My kids and pets kept knocking over our lamp, leading to the original plastic lamp shade cracking and breaking. This is a drop-in replacement for the original.…
Comes in two sizes, thick (5 mm) and thin (1.6mm). They consume about 80g and 25g of filament respectively. Obviously the thin version needs to be attached to something rigid. Scale the sign equally in X and Y to get the size you desire.
This is a cute cat keychain with the phrase “Stay Pawsitive” – a fun little reminder to stay positive! Perfect as a gift or just to brighten up your keys, backpack, or zipper pull. ✅ Designed for easy one-color printing. 🎨 You can pause…
I design this case for my gf (remix from iphone case voronoi by LinkDesigns, only working case I found out there for the iphone SE 2020 with TPU). She's a huge Taylor fan. I did for iphone SE 2020 but i could do for other models if…
A lamp shade for a Mainstays 5-light Floor Lamp from Walmart. I think it will work for the similar Ikea lamp but haven’t tried it. There are two models available. The regular one is designed for 0.4mm nozzles. The “thicker” one works for…
Hardware: 8 m3x8mm countersunk screws 40mm 5v fan Category: Electronics
The Tortured Poets Department - Lithophane Taylor Swift made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Right now I'm calling this style “ Relief Topography ” It's easy to print multi-color images on a single-color printer. I started with black and got lighter with each change. There are 3 stops built into the gcode where you can switch to…
Speak Now (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Showcase your love for The Life of A Showgirl with this keychain
I recommend using scaling in prusaslicer to match the needed size of your dress shirt if the provided size doesn't quite work. Ironing can be used to give a smooth surface if desired.
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open!
Collar stays for shirt collars. Shirt sizes vary so you may need to adjust the length in the step file.
Opel corsa c bonnet stay clip. Printed in abs. 20% infill. Print with supports. 37 minute print. To edit the step file. Edit the step file in solid edge. Open as an iso metric part. Go to options - units - length and click the drop down…
This holder conceals the charger cable and attaches to the cup holder without requiring any modification or disassembly of the center console. It can be installed and removed instantly, yet is stable enough to keep the phone in place…
Designed this for a friend as a gift, thought other people might like it. Change filament after 4mm (at the beginning of layer at 4.2mm for 0.2mm layer height). I used a line width of 0.25mm, otherwise some of the thinner parts of the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…