Wyniki wyszukiwania: tern

Vase mode Jack-o'-lantern - Halloween pumpkin lamp

If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…

7" Touchscreen case for Raspberry Pi 4 + internal fan

Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…

Large screwdriver holder with honeycomb pattern

Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…

Egg Maze Container cactus pattern

Egg-shaped puzzle container with “cactus like” ribbed pattern on the outside. This maze is not complex, without too many long dead-ends; but there are no external indicators of where the “pointers” in the maze are located. Designed to…

Frohe Ostern Schriftzug

Frohe Ostern Schriftzug

Green Lanterns (2026) John Stewart Ring

John Stewarts Ring from the up coming Green Lanterns HBO series. Not 100% accurate as only based on one shot from the teaser trailer.

Christmas Lantern for LED tealight

The Christmas lantern consists of two parts, which are printed in place. The inner part can be rotated so that the LED candle can be placed inside the lantern. The snowflakes are embossed in a way that allows the light from the candle to…

Articulated Jack-O’-Lantern Buddy

Meet the Articulated Jack-O’-Lantern Buddy – a fun Halloween-themed figure with posable legs and cute little arms. Use tree supports with back seam position. ✅ 70 mm tall ✅ Articulated legs for playful posing ✅ Perfect Halloween…

Egg Maze Container with leaf pattern

Make them earn their Easter candy with this egg maze container. Fun, yet not too difficult, maze to solve to open up the egg and get at what's inside. Printed in 2 pieces with 0.4mm nozzle and 0.16mm layer height. Supports optional.…

Glowing Christmas Tree - Tealigh latern - Christmas Decoration

Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA

International scout fleur de lis woggle - Canuto o pasa pañuelo con la flor de lis internacional de los Scouts

Hey there! Here's some cool info about the Scout symbol, the fleur-de-lis. Sir Robert Baden-Powell, the founder of Scouts, chose it as the official symbol. It's all about the Scout code: duty to God, others, and yourself. The fleur-de-lis…

Geometric Patterned Glasses Holder

Included g-code includes Hilbert Curve top fill and bottom fill, as well as ironing to produce a nice, smooth surface.

Twisted Lantern Lampshade

Twisted Lantern Lampshade Lampshade for E14 lamp socket or vase cover. Printing: The lampshade was printed with one perimeter in vase mode. The light mount adapter is also printed in vase mode. For E14 socket a negative volume was…

External 3.5" HDD rack (UPDATED TO V2)

Rack/stand for 4x 3.5" HDDs. Print one for each side. I used fairly standard hard drive screws, found in basically any computer hardware store. I added a flattened version to print laying flat, inspired by BrewKnell's make, which shortens…

Ghost of Tsushima Inspired Miniature Japanese Garden lantern

Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…

Tiny Winter Village Lantern

I modeled a small winter village for a lantern lit with tea lights. To create the model please follow the steps below: Print the top. This can be printed at 0.2 mm layer height with no supports. I would recommend printing in PLA at a low…

Fensterhalterung für Herrnhuter Stern

Fensterhalterung für einen Mini Herrnhuter-Stern

Crystal Tower - Light diffuser Lantern

A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…

😎 Party fun "nerd" glasses with interchangable lenses (choose your own pattern)

Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

nut driver / Mutternschraubendreher

A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…

Over the Garden Wall Lantern

This is a present that I made for my brother-in-law, who is a huge Over the Garden Wall fan. He picked 4 images that he liked from the show, and I was able to adjust them to fit inside of a lantern, replacing the glass panes. Tissue paper…

Simplified western locomotive as print in place

Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…

International Standard Banana for Scale and Reference

Have you ever wanted to find out the size of something, but instead of using pesky units like inches or centimeters, you wanted to use something much more REAL? Well, then this is the measurement tool for you! This International Standard…

Winter themed Lanterns for IKEA LED candles //Ladovská zima - lithophane na led svíčku + PF 2022//

Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…

Coaster with Beautiful and Functional Pattern

I designed this coaster to use in the kitchen, under the dish-soap bottle. The pattern not only looks nice, but it also prevents the bottle will stick to the coaster. The object is optimized for 3D printing and works with a wide range of…

Halloween Pumpkin lanterns

From the bottom, it is better to stick the light with adhesive tape to the pumpkin Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color: Orange Filament material:PLA Notes: 0,24 mm layer 0.4mm…

Vertical Laptop Notebook Stand with Hexagon Pattern

When using my notebook at home, I connect it to a usb-dock and need to securely store it on the side of my desk. So I made this stand to have it stored neatly and provides good air flow for cooling. This model consists of two feet and a…

Japanese Lantern Lithophane

Giving full credit to the original design - this is a remix of this lantern - Japanese Garden Lantern Lamp by Keenan - Thingiverse I printed everything at .15 layer height. I did supports only on the middle section on the openings for the…

Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]

This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…

🕶 Party fun glasses "smart-ass" with interchangable lenses (choose your own pattern)

Info: another model of glasses with interchangeable lens with different patterns the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

Winter Lantern with Interchangeable Color Panels

Get ready for winter with this stunning lantern, designed to brighten up any space with a warm, festive glow. With a modular design, this lantern can be printed in a variety of colors, allowing you to create a unique look. Each part is…

The Modular Lantern Frame, Lid, Pole and Foundation - Low Poly Design

This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…

Octoprint - Raspberry Pi3 case with internal Noctua fan

update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…

Osterhase Frohe Ostern 25 cm

Hello community 25cm Version Here's another sweet Easter bunny with Frohe Ostern My wife and daughter love him.

Flower Pot with Spiral Pattern in Various Sizes

I'm thrilled to present my latest design, a round flower pot that elegantly showcases a captivating spiral pattern swirling around its sides. It's not just an ordinary pot; it's a statement piece that combines aesthetic appeal with…

PS5 External HDD Holder

I got inspired by the “https://www.prusaprinters.org/prints/63672-ps5-controller-clip” and made a similar holder for the external harddrive. I printed mine with a 0.6 nozzle at 0.4 layer height.

Beetlejuice Buddah (From Howard Stern)

https://www.thingiverse.com/thing:4524495. - Original Used PLA Prusament .4mm Nozzle @ .2mm layer height. 15% Infill and 3 walls. Worked incredibly well for me! Make sure to like and subscribe!

Hernhuter Stern (Christmas Star)

Hernhuter Stern zum Aufhängen. eine LED Lampe in eine E14 Fassung ist in eine Spitze reingeklebt. Hierfür von der gewünschte Spitze die Spitze abschneiden. die 2 Halbkugeln werden zuerst mit Sekundenkleber zusammengeklebt. Anschliessend…

Rose International Woman's Day (Various languages)

A rose for every woman in the world! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Ironing: Topmost surface only Languages available: Portuguese, Czech, Spanish, English, Dutch, Deutsch, Italian, Romanian, French, Dansk…

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Hollow Jack-O'-Lantern

This is a decorative, hollow jack-o'-lantern that has been sized to be able to fit an LED tealight (fire and plastic don't mix, please don't put a real candle in this). You could also use it as a decorative container if that's your thing.…

Masks of Love Pattern

Fabric marking pattern for pattern from masksoflovewnc.weebly.com Includes slot for marking fabric fold point in A pattern. Will be attempting a print/cut/sew after current round of face shields is done. Have verified pattern is a close…

Eternal Desk Calendar english/german

Perpetual desk calendar for month and date, optionally with day name. Months and days in English or German.

Hyperpixel 4 Touchscreen External Lack Enclosure Frame Prusa MK3S

Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…

Bondtech feeder with internal filament sensor - IFS (BMG parts compatible)

This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor

Mini Jack-O’-Lantern Buddy

A tiny Jack-O’-Lantern Buddy for maximum Halloween fun! Use tree supports and back seam position. ✅ Just 10 mm tall – the smallest pumpkin buddy 🎃 ✅ Perfect for hiding around the house for spooky surprises ✅ Works great as part of the…

V-Slot 2020 Internal Corner Connector (Reinforced)

This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…

Jack-o-Lantern Chip Clip

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.2mm…

Keksausstecher für Ostern / Easter Cookie Cutters

Keksausstecher für Ostern (Osterhase + Ei) Cookie Cutters for Eastern (Bunny + Egg)

Genie in a Lamp - Lantern

Genie in a Lamp - Lantern Its interior is hollow and if printed in food safe material can hold liquid. DO NOT USE IT AS A OIL LAMP. (obviously) Add your own chain to attach cap to lamp.

Happy Eastern Dragon

A cute dragon for your desk! Keep the overhang threshold at 60 and that's enough for this model. Scalable to any size :)

Adjustable sternum/chest strap attachment

An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.

Seagate External Drive Holder

Seagate External Hard Drive storage container. also has a spot for storing the USB cable. There is a hole in the back of the unit to access the port while keeping the drive in place.

Mobula 8 Alternative Battery Mount

The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…

Ultimate Open Lattice Top (8 Point Pattern)

This print is great for all levels of experience. The open lattice pattern looks great still, but even better while it's spinning. The openings form patterns that change based on the viewing angle and the speed it's spinning. Want to show…

RYOBI USB Lithium 4V Battery Adapter and Pop-up Lantern

RYOBI has come out with a new USB Lithium 4V Battery system. The battery is charged via a USB type C port. So you can Solar Charge it! They only have come out with a Cutter, Screw driver, Chisel, and Rotary Tool. I designed and 3D printed…

BlueSCSI External Case

Simple, sturdy case for an external BlueSCSI DB25 v1.1. Requires two m3x10mm socket cap screws, but 8-11mm long should work as well. Exposes the SD card slot but hides all the other things. They’re inside if you need them! Print with the…

Lantern ⌺ Vase Mode

IPhone12 pro case honeycomb pattern

iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses

Prusa MINI Enclosure - External Display Housing

This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…

Industrial Phone Stand - Larger w/ Voronoi Pattern

I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…

Elegant Stand for Lantern

No Longer Supported This project has been replaced by: The Modular Lantern Frame, Lid, Pole and Foundation - Low Poly Design An add-on for the lantern LR2268. An elegant stand with a hollow stem. I designed this stand to allow converting…

Waffle Pattern Drawer Handle

Waffle pattern handle secured with M4 screw and nut. Print Settings: Material: PLA, PETG Nozzle: 0.4mm Layer height: 0.30mm Supports: no Perimeters: 2 Infill: 10% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222

Ultimate Open Lattice Top (6 Point Pattern)

This print is great for all levels of experience. The open lattice pattern looks great still, but even better while it's spinning. The openings form patterns that change based on the viewing angle and the speed it's spinning. Want to show…

WD Elements external hard drive desk holder

I wanted to have a nice place for my backup hard drive on my desk. The hard drive used is the WD Elements portable external hard drive (2 TB). Just use two screws (that aren't longer than the thickness of your table) and screw it in. It…

IKEA BESTA hole pattern drilling jig

I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…

Frohe Ostern Schriftzug MMU

Frohe Ostern Schriftzug Buchstabenfarbe frei wählbar.

Lamp shade with hexagonal pattern

Replacement of lamp shade made from fabric.

Washi tape tool | Cut washi tape into fun shapes and patterns! | straight edge, zig zag edge, arrows, chevrons

SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…

UFS-032 Black Pipe Diameter NPT Gage, External Measurement

This is my original design. It is similar to a circle template. The circles match the outside diameter of galvanized or black pipe made to imperial NPT standard gage. This was a tool of necessity. I was insulating pipes under my house. At…

Prusa XL - external USB power supply - PSU cover

I bought the stepdown USB modul on ebay. Search for “ stepdown USB modul ” an compare the images. I updated the part, the new board size is 19,2mm x 38,5mm Need one M3x6 screw. I mounted it on the right PSU, there is a free power port and…

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…

External MMU Mounting System (EMMS) for Original Prusa Enclosure (OPE) and MMU (Ultimulti)

Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…

Extra-wide lens hood Canon EW-73D alternative

The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…

Parkside led flashlight holder model HG06412 / Soporte para Linterna led Parkside modelo HG06412

A bracket for the Parkside HG06412 LED flashlight with hooks for use in wall-mounted sales in LIDL supermarkets. Perhaps it can be used in products from other manufacturers such as Ikea, but I do not know. The separation between hooks is…

140 mm fan grill with hexagon pattern

140 mm fan grill with hexagon pattern

Screwdriver holder for table, honeycomb pattern

The height can be adjusted to match the length of your instrument. Current height = 105 mm Hex size is 9mm Material PETG or PCTG. Rough surface mode is used. If you don't like it, you can turn it off.

Vase #6 - Pentagon Pattern

A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…

Wavy Pen Cup (Vase Mode) with alternate models

Details After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern. Dimensions…

Zip tie mount for Original Prusa Enclosure - External

I had a need to run and secure a power cable on the outside of my Original Prusa Enclosure. I designed this zip tie mount for that purpose. It has an inset for an M3 nut. I used a M3 x 4mm socket cap screw to attach to enclosure. Print…

star tree ornament - Stern Baumschmuck

es gibt eine größer und eine kleinere Version Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Infill: 0% Schöne Weihnachten!

Kristina's Bird and Flower-Themed Side Panels for the Modular Lantern

These are Kristina's unique bird and flower-themed side panels for the modular lantern. I created various prints from her design: There are simple solid three-colour prints and variants where the leaves or the flowers create cut-outs.…

Wall hanger for western guitar

Hi, easy to print wall hanger for an acoustic guitar (western guitar). The Opening ist 45 mm, this fits to many western guitars. Classical guitars won't fit in! The Idea was to create a wall Hanger that snuggles as tight as possible to…

DIN Box (with internal rail), for power supply / transformator

This enclosure fits a (video) doorbell transformer that uses a DIN rail. Not always there is enough room left in a fuse box. This box/enclosure, has a 35mm DIN rail inside and has fits a double width DIN module. You can print it without…

Herzen Brezeln Sterne gingerbread mold - cookie cutter set/ Lebkuchen-Form Keksausstecher

Hello friends from all over the world :) This is my contribution to the cookie cutter contest. In Germany, in the winter time there is this gingerbread mix, called “Herzen, Brezeln, Sterne" available in every grocery store. With these…

Xiangqi / Chinese Chess - complete set (pieces board box) Western-style pieces, 180mm bed

This is a Xiangqi (aka Chinese Chess) board and pieces, targeting the Prusa Mini. It fits in the build plate by nature of being sliced into parts with connectors between. It is multi-colored based on layer changes (for the playing pieces)…

Lantern Christmas Bulb 2024

There are 3 other ornaments in this series – a finial, a topper, and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me to stay up to date. I've provided my PrusaSlicer project files (3MF) and GCODE…

Alternate Prusa XL Spool Roller

I wanted to replace the static XL Spool Holders with a holder that incorporates some bearings. It's useful for both holding a spool directly, or when feeding filament directly from my filament dryer. The design uses two 608 bearings that…

Bakugan Attributes Talismans - Internal Magnets

The Bakugan Attributes are representative of the Bakugan's elements. These have internal slots for 6x3mm magnets. Use your slicers multimaterial painting bucket fill function to add color. Included FreeCAD file includes all of the…

Outer Wilds Relic Lantern with Flame

Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to…

Synology DS218 holder for WD Passport external drive

Two easy-to-print hooks for adding an additional drive - WD Passport - to your Synology DS218 server. Add adhesive felt pads and everything will sit tight.

External SSD & HDD stackable holder

This holder is designed to hold multiple external HDD & SSD. It is stackable for compact footprint on desk. Max size of SSD & HDD holded : 123 x 83 x 21mm Print parameters : PLA or PETG Noze 0.4 with 3 perimeters for separators (for clip…

Without Words (International Travel Helpcard)

Just a little wordless creditcard size helper. In case you're lost for words abroad. Print with your favorite settings. Advise to use smaller nozzle (<0.4) for sharp engravings. Color change at height 1mm. * You can of course also scale…

Multisystem Alternative Lid - Genesis / Megadrive v2

This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…

12.7mm Slimline External Disc Drive Enclosure

This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity)…

spacer ring for Winter themed Lanterns for IKEA LED candles // Ice winter - lithophane for led candle + PF 2022 //

Vytvořil jsem distanční kroužek na svíčku z našeho papírnictví. vnější průměr 42 mm / vnitřní průměr 37,5 mm I created a candle spacer ring from our stationery store. outer diameter 42 mm / inner diameter 37.5 mm

Hoodoo Hex sheet Chainmail pattern (Version1)

Here is a sheet of the hoodoo hex pattern, wilI l update it with a few sizes and the parametric model when done.

DIY External HDD / SSD

This simple case enables you to bring a second life to old 2.5 inch hard drives from old laptops or other devices This adapter is sized to fit the Anker USB 3.0 to SATA Adapter available on Amazon The enclosure features small retention…

Bolt Pattern Gauges

I ran into a problem when buying wheels for my truck. I went to get the wheels being told they were one bolt pattern and it turns out they were a different bolt pattern. These gauges are for checking what lug pattern the 8 lug wheels are…

Fox Lantern / Lamp Shade – Multi-Purpose Light for St. Martin, Tealight, or IKEA Fado

I designed this lantern when we needed a quick and simple St. Martin lantern for our little one — and I wanted to see how such a project could be made efficiently and with minimal material using a 3D printer. The result is a versatile…