Wyniki wyszukiwania: thermos

Sortowanie

496 modeli

P
PrintablesSurfalex2000

Homematic Thermostat stand

Needed a nice looking stand for the Homematic Thermostat. There are 3 versions. A supportfree, that you need to use double sided Table, and 2 with spring loaded mounts. The difference in the last 2 is only in the height. For best…

Pobrania
462
Polubienia
38
Ocena
5
P
Printablesecsv

Temset valve to M30x1.5 thermostat adapter

The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…

Pobrania
382
Polubienia
9
Ocena
0
P
PrintablesMikkoP HAM3D

Ninja CreaMi Insulated Tub Cozy (thermos)

A handy thermos cozy thing for Ninja Creami containers. Dual wall design with a large air gap in between for proper insulation. Keeps ice cream tubs cooler and ice-creams unmelted significantly longer Prevents water condensation and drips…

Pobrania
282
Polubienia
52
Ocena
5
P
PrintablesDominik

Moes Zigbee Thermostat (TRV) Adapter

Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…

Pobrania
220
Polubienia
19
Ocena
5

Nest Thermostat Backplate

Wanted a backplate for my Nest Thermostat to cover up the holes left from my previous older thermostat but I didnt like the large ones that Google sold that felt like they dwarfed the Nest. My version covers any holes within a diameter of…

Pobrania
204
Polubienia
22
Ocena
5
P
PrintablesLuis

Thermos TC Bottle drying stand / Thermos TC Flasche Trockenaufsteller

A nice little print to stop your Thermos drinking bottle from tipping over. Ein kompakter Trockenaufsteller für eine Thermos TC Flasche (1 Liter), der das Umfallen währen des Trocknens verhindert.

Pobrania
132
Polubienia
17
Ocena
5
P
PrintablesTiques77

Thermos TC Bottle drying stand & add on

A stand to let your Thermos TC bottle (500 milliter) dry on the sink with add on for to put the cap

Pobrania
26
Polubienia
5
Ocena
5
P
PrintablesChromatic

Hive Thermostat Mini Stand (remix)

This supports the mini version of the Hive thermostat. A remix of joepublic's design, adding support on both sides. For the stand, I recommend a layer height of 0.20 mm and printing with a brim. I used 15% gyroid infill. For the two…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesClaus

Thermostat for fan in enclosure

The print is designed specifically for the Schneider Electric Thermostat ClimaSys CC There are two versions of the print. One version with connect box for WAGO Connector and one version for 4 Connector Strip. It is designed for 2x0.75mm2…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesLeone25

Thermos Button

I made the mistake of cleaning with boiling water the original button so I modeled this one as a replacement. You can find the original thermos here (or in may other places, it's often rebranded): https://www.amazon.it/dp/B09SZL233P/…

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesvalde

Handle for Quechua Thermos 0.75L Decathlon / Fusion files!

Engineered for a secure grip and precise pouring control. Modeled to fit seamlessly on the original cap, thread this accessory solves the issue of the slippery metal surface, making it ideal for camping, hiking, or serving hot drinks like…

Pobrania
8
Polubienia
2
Ocena
0
P
Printablespipersw

Housing for XY-SA30-W thermostat

Print in asa or abs for heat resistance. Non brim (included with the stl file), with support

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesMrCorona

Hydrapeak 18/32 oz food thermos 3ml vial insert

Update: There are two versions of inserts now. The original size fits the 32oz thermos. There is a shorter version for the 18oz Hydrapeak food jar. I designed a custom insert capable of securely holding 20 vials, with the option to hold…

Pobrania
882
Polubienia
78
Ocena
5
P
Printableseight_heads

Google Nest Thermostat Trim Plate

I just installed the new Google Nest Thermostat and needed a trim plate to cover the holes from my old thermostat, Fusion 360 to the rescue! This is for the NEW Google Nest Thermostat found here not the Nest Learning Thermostats. Update:…

Pobrania
568
Polubienia
41
Ocena
4,8
P
PrintablesMrWhite

Heizkörper Thermostat Reperatur Teil - Smart Home / Homematik IP / Zigbee / Tuya etc.

Update 2026: Das Ersatzteil wurde nochmal überarbeitet in der Version 1.2 mit nur 4 Schlitze. 4 Schlitze reichen aus um den Gewindering auf das Ersatzteil zu schlieben. Jetzt sollte das Ersatzteil um einiges stabiler sein. Außerdem wurde…

Pobrania
565
Polubienia
23
Ocena
5
P
PrintablesLord Sexy

Heating Radiator Adapter Danfos RA Shelly TRV Adapter Smart Thermostat

I remixed it from lukasto to fit my needs. Only change is the M3 nut. On the original it didnt fit. This fits a M3 nut perfectly. Its not super pretty, but no one will notice… Its a adapter for the heater Print in PETG(!) I used 0.15 mm…

Pobrania
470
Polubienia
36
Ocena
5
P
PrintablesHarry

M30x1.5 adapter for Netatmo radiator thermostat

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Pobrania
449
Polubienia
17
Ocena
5
P
PrintablesLoboCNC

Soda Can Thermos

Keep your soda or beer cool and protected with this soda can thermos/kozy. The screw-on lid press-fits on the bottom (like a pen cap) so you don't lose it while imbibing. I had posted this soda can thermos a while ago, but took it down to…

Pobrania
395
Polubienia
71
Ocena
5
P
PrintablesPeeFeS

Homematic IP Wandthermostat Ständer

Es gibt zwar schon den ein oder anderen Ständer aber ich wollte ihn etwas anders und grundsätzlich ohne viel chichi. Er ist so konstruiert, dass das Wandthermostat genau passen sollte und man ihn mit etwas Kraft auch einfach wieder…

Pobrania
370
Polubienia
22
Ocena
5
P
Printablestr8

Radiator valve adapter from M34x1.5 (Polytronic valve) to M30x1.5 (standard for most thermostats)

An adapter to use thermostats or smart radiator controllers (like Fritz!Dect301, CometDect and probably others) on radiators with Polytronic valve. Print in PETG or ABS because PLA is not heat resistant enough!

Pobrania
334
Polubienia
11
Ocena
5
P
PrintablesMrWhite

Danfoss RAV Adapter für Thermostate / Smart Home / Homematic IP / Zigbee / etc.

Wer noch die alten Danfoss Adapter hat kennt wohl das Problem. Die beigelegten Adapter von den Hersteller sind einfach schlecht und können sich ganz leicht lösen. Habe dann teure Metall Adapter gekauft die man mit 4 Madenschrauben fixiert…

Pobrania
328
Polubienia
12
Ocena
0
P
Printablesk-eye

Bottle Dryer - 720 Dgree Thermos etc

A way to dry bottles of eg Thermos, 720 Dgree and so on. If the print should cause problems, simply turn the stand and print the other way around. Eine Möglichkeit, Flaschen von z.B. Thermos, 720 Dgree usw. zu trocknen. Falls der Druck…

Pobrania
325
Polubienia
53
Ocena
4,71
P
PrintablesAnand Jasani

Nest Thermostat Rectangular Trim Kit

A rectangular trim kit that can be installed under the Nest Thermostat to cover up any imperfections on the wall.

Pobrania
310
Polubienia
27
Ocena
5
P
PrintablesUlli

HomeMatic Funk-Heizkörperthermostat HM-CC-RT-DN Ersatzteil Flansch

Support wie im Bild. 3x 2mm Schrauben zur Befestigung notwendig. Gedruckt in ABS. Grobe Anleitung: Ausgangszustand Motoreinheit ausbauen (4x T6 unter dem Batteriedeckel, Verstellrad einfach abziehen) Flansch entnehmen (2x T9 seitlich)…

Pobrania
309
Polubienia
28
Ocena
5
P
Printablesukwebb

Hive Thermostat stand

A simple but effective stand for the Hive Thermostat. This requires nothing additional and uses the supplied back plate. You only need two m3 screws between 5 and 9mm long to fasten the back plate to the stand. Probably look best in…

Pobrania
261
Polubienia
18
Ocena
5
P
PrintablesCog Nomen

Modular Water Bottle / Thermos rack

Thanks to bjamdesign for the original. This is a refactor from scratch using 3/8" / 10mm dowels. I used 6" long ones from Amazon to avoid any need for cutting. My parts ended up a few millimeters larger on each side (I optimized for my…

Pobrania
260
Polubienia
94
Ocena
5
P
Printableschixxi

Netatmo Thermostat - Danfoss RA-N Adapter

Description The original Danfoss RA-N Adapter which come in the box which each Smart Netatmo Radiator Thermostat is complete crap. It does not fit properly, does not keep the thermostat in place reliably and the thread keeps failing. This…

Pobrania
245
Polubienia
22
Ocena
0
P
PrintablesTigFur

Thermostatic radiator valve control replacement

Why would you need this instead of buying a cheap replacement? Made to fit a Danfoss thermostatic radiator valve. Allowed me to turn off the radiator and push the valve's pin back. How to use: Press fit one half onto the valve The half is…

Pobrania
242
Polubienia
21
Ocena
0
P
PrintablesModern Makes

Google Nest Thermostat - Wall Trim Kit

This is a trim kit to mount your Google Nest Thermostat to a wall. For more information, print settings, and installation instructions: Click Here

Pobrania
242
Polubienia
35
Ocena
5
P
Printablescapze

Tado WIFI Thermostat Stand

Simple Tado WIFI Thermostat Stand, for easy grab.

Pobrania
241
Polubienia
14
Ocena
5
P
PrintablesRiley

Pop Can Thermos

The pop can thermos keeps drinks hot and cold. Show off your 3D printed thermos to your family and friends. Use a can opener to reuse old cans to drink coffee with the printable handle option. Utilizing Prusa's modifier mesh, the thermal…

Pobrania
234
Polubienia
86
Ocena
4,8
P
PrintablesGarlicGnome

Danfoss Adapter Homematic Thermostat

Danfoss Adapter Print: Material: PETG or PLA Layer: 0,2 mm Brim: 5mm Finnishing: Cut the Ring open at on of the Notches with a Saw. Afterwards you can Fit it onto the Valve. At last Screw on the Homematic Thermostat

Pobrania
224
Polubienia
12
Ocena
5
P
Printablesscenek

Diyless OpenTherm Thermostat Housing

Housing Dyiless ESP32 OpenTherm Thermostat, see https://diyless.com/product/opentherm-thermostat

Pobrania
220
Polubienia
8
Ocena
0
P
PrintablesAnand Jasani

(3 Sizes) Nest Thermostat Circular Trim Kit

A circular wall plate for the Nest Thermostat. There are 3 sizes available (160mm, 120mm & 80mm).

Pobrania
216
Polubienia
16
Ocena
4
P
PrintablesLennnard

Thermostat Adapter - Vaillant Circo to M30x1.5

Simply print in the given orientation. Do 4 Perimeters for ultimate strength.

Pobrania
215
Polubienia
13
Ocena
5
P
PrintablesKristian

eQ-3 Homematic IP Thermostat Evo (HmIP-eTRV-E) Front Cap Replacement / Repair

This is a replacement cap / front piece / bracket for a broken eQ-3 Homematic IP Evo (HmIP-eTRV-E) Thermostat. The front cap has broken off on two of my thermostats, which happens quite easily by accidentally bumping into the thermostat,…

Pobrania
209
Polubienia
11
Ocena
5
P
Printablesmoxieman19

Thermostat Knob

I made this knob for the thermostat in my parents' basement after theirs had broken. What are the chances that this knob fits something that you have? Probably unlikely - but there's only one way to find out! The knob is 1.375" wide, and…

Pobrania
208
Polubienia
13
Ocena
0
P
PrintablesTuraiel

Nest Learning Thermostat (3rd Gen) Wall Plate with Optional Power Wire Slot (Parameterizable)

This is a custom square wall plate for the Nest Learning Thermostat (3rd generation). I have included a version that is just a wall plate and a version that has a slot for an external power adapter wire. I do not know if this is…

Pobrania
201
Polubienia
10
Ocena
0
P
Printablessober

Thermostathalterung

Mit diesem Bauteil lässt sich eine abgebrochene Halterung eines Heizkörperthermostaten ersetzen. In meinem Fall ein Bosch Smart Thermostat I. Das Bauteil kann z.B. mit 2K-Epoxikleber angebracht werden. Die Kante, an der sich die…

Pobrania
189
Polubienia
7
Ocena
0
P
PrintablesSELBSTgedruckt

Station for Braun Thermoscan Thermometer

Halterung für Ohr-Termometer Braun Thermoscan 6 und andere Modelle von Braun Zur Aufnahme des Thermometers und der Hygieneschutzhüllen. Gedruckt mit PLA 0,2mm Layer - 20% Infill

Pobrania
175
Polubienia
25
Ocena
5
P
PrintablesDatafreak

Simple W3230 Thermostat mount for Prusa Enclosure

This is a simple W3230 Thermostat mount for Prusa Enclosure. Example Thermostat: https://www.amazon.de/gp/product/B07RHDS2RN/

Pobrania
174
Polubienia
14
Ocena
0
P
PrintablesSergej Riedel

Thermostat-Adapter für Danfoss-Ventil Typ RAVL 3/8“

Hierbei handelt es sich um einen Thermostatadapter für das Danfoss-Ventil Typ RAVL 3/8“. Er ermöglicht das Anbringen eines Thermostats mit Innengewindeschraube 30 x 1,5 mm, beispielsweise eines Oventrop-Thermostats. Am besten druckt man…

Pobrania
167
Polubienia
7
Ocena
5
P
Printablesmakey_makey

Mazda BT-50 Thermostat or Air flow control knob

I printed with 20% infill and 'supports on build plate only'. Make sure the supports are on the side of the knob that you wont see. Keep in mind that summer temperatures in your car can exceed 100C. I've printed in PETG for now and have…

Pobrania
162
Polubienia
2
Ocena
0

Thermostat switch cover for BentoBox

This is a top cover for the BentoBox by thrutheframe to incorporate a thermostat switch I had laying around. At 30°C the fans for the BentoBox turn on. Be sure to by the NO Normally Open switch, so the fans turn ON at 30°C, see the…

Pobrania
161
Polubienia
75
Ocena
5
P
PrintablesNerdyBean

Enclosure for W1209 thermostat

Don't forget to give a like if the model was helpful to you. Update 12.02.2024 You can choose between two versions: the old version and the new version where I fixed some issues.

Pobrania
161
Polubienia
12
Ocena
3
P
PrintablesGvlad

Aqara thermostat M28x1.5 adaptor

The adaptors included in the Aqara thermostat pack did not fit my valve thread. I've made this adaptor and it works fine with the included plastic extender. I've printed my part with a 0.6 nozzle since my 0.4 just broke down but it turned…

Pobrania
157
Polubienia
12
Ocena
0
P
PrintablesA3DRS

thermostat box w3230

Una caja simple con alojamiento para un termostato w3230 y un interruptor de corte. En mi casi el interruptor es para la iluminación LED del gabinete. Por la parte trasera tiene la salida para la sonda y alojamiento para 2 conectores…

Pobrania
154
Polubienia
23
Ocena
5
P
PrintablesRene

Honda Hornet CB600 thermostat housing cover

Use a material that can deal with the heat. PETG should last well enough. Suggested print orientation:

Pobrania
153
Polubienia
8
Ocena
0
P
PrintableszBeeble

Raspberry PI 7 Inch Screen Project Box (or a Thermostat for me)

This is a versatile and large wall-mounted Raspberry PI project box. I can fit 4 HATs in there along with the PI and the 7 inch touch screen. And it prints in two parts without supports. If you mount this on a wall, as intended, the vents…

Pobrania
150
Polubienia
12
Ocena
0
P
Printablesquietsnow

BentoBox v2.0 Thermostat Switch Cover

I was inspired by @RobBobM 's innovative idea to use a temperature switch to turn on/off the BentoBox 's 2-stage filter. Rob made this for BentoBox v1, and I wanted it for BentoBox v2, so I made it. :) I used a Normally Open (NO) 35ºC…

Pobrania
148
Polubienia
27
Ocena
5
P
PrintablesKodiac

Tado Heater Thermostat Child Lock

This cage is being put over your tado heater thermostate. The idea is that your toddler will not be able to turn main tado part of its base at the heater. The toddler will only be able to turn the cage but not put enough force onto the…

Pobrania
145
Polubienia
14
Ocena
4
P
PrintablesPeter

eQ-3 eq3 thermostat to Danfoss RAV valve adapter v8

Copyright (C) 2019 Peter Senna Tschudin SPDX-License-Identifier: GPL-2.0-only This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A…

Pobrania
140
Polubienia
6
Ocena
5
P
Printablesschnuckikucki

Heizkörperlüfter und Thermostat Gehäuse für für Heizkörper Typ 22 70 - 140 cm

Gehäuse für Heizkörperventilator oder Heizkörperverstärker bzw. Heizkörper-Booster Für 2-Platten-Heizkörper Typ 22 Mit einem Heizkörperlüfter lässt sich die Wärmeleistung bestehender Heizkörper einfach erhöhen. Heizkörperlüfter befördern…

Pobrania
140
Polubienia
25
Ocena
0
P
PrintablesHarry

M30x1.0 adapter for Homematic eTRV-2 radiator thermostat

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Pobrania
138
Polubienia
9
Ocena
5
P
Printablesnetpaq

Braun ThermoScan and lens filters storage box

The box is designed to hold: Braun thermometer. 60 lens filters out of their boxes or 2 boxes of 20 filters (40). The finger notch can be used to store the lens protector when permanently keeping a lens filter on the thermometer. I…

Pobrania
137
Polubienia
16
Ocena
0
P
Printablessoesei

DIYLESS OpenTherm Thermostat case

This case will fit the DIYLESS OpenTherm shield and WeMos D1 mini (this is the default package you can order from their website). The case allows for screwing it securely into the wall. The lid should stay in place by simply press fitting…

Pobrania
123
Polubienia
6
Ocena
0
P
Printablesbmoore04

Thermostat Knob (King)

Printed in ABS. .2mm layer height.

Pobrania
123
Polubienia
11
Ocena
4
P
PrintablesDelta-Fan

Abschlusskappe Thermostat Gewinde M30x15

Deutsch Um einen Heizkörper in unserem Haushalt stllzulegen, benötigte ich eine Endkappe, mit der ich das Thermostatventil ersetzen konnte. Die Kaufoptionen waren mir zu teuer, also entwarf ich ein Modell, welches mir gefiel. Es hat ein…

Pobrania
107
Polubienia
11
Ocena
0
P
PrintablesKKMS

Bottle Set - Potion, Elixir, Thermos etc

There are 8 different size and shape between 4mm to 15mm. nicely working screw cap

Pobrania
105
Polubienia
20
Ocena
0
P
Printablesdjk96

Braun ThermoScan 3 Box

Storage bock for fever thermometer and single use tip protectors. Glued in magnets.

Pobrania
105
Polubienia
16
Ocena
0
P
PrintablesSeKoLi

Skoda Elroq Center Console Thermos Holder

This is a simple and practical thermos holder designed specifically for the center console of the Skoda Elroq. The holder is sized to fit coffee thermoses and travel mugs with a diameter of approximately 71 mm . It helps keep your drink…

Pobrania
103
Polubienia
6
Ocena
0
P
PrintablesMrBlue

STC-1000 Thermostatgehäuse

Ein Thermostatgehäuse für das STC-1000 Modul. Das Gehäuse besteht aus 2 teilen, der Boden und das Gehäuse selbst, das Gehäuse wird einfach auf den Boden aufgesteckt. Im hinteren teil befinden sich 3 Löcher (2x12.1mm 1x 5mm (Sensor) Beide…

Pobrania
101
Polubienia
13
Ocena
4
P
PrintablesPomi

Danfoss Ally thermostat adapter to Oventrop valve M30x1

Print instructions Print with 0,1 mm layer height for sufficient thread quality. Fillament PETG or ASA. 4 outer perimeters. Supports needed. Use cylinder support enforcer with diameter 27 mm. The support must not touch the internal thread…

Pobrania
100
Polubienia
4
Ocena
5
P
PrintablesSemaphore77

HomaticIP Thermostat/Switch Table Stand

A modular table stand for Homematic IP switches and thermostats. Update 2023-12-29: Uploaded all new files + pictures. Update 2024-01-13: Added high base V2, which doesn't tile when using the switch/thermostat. You need the HOLDING PLATE…

Pobrania
98
Polubienia
6
Ocena
5
P
Printablesacmegeek

Classic Round Honeywell Thermostat Housing Cover

If you have a classic Honeywell Round Thermostat and are either missing the cover or would like to change the color by printing your own, you are in luck! This is a near perfect match to the original. Easy to print and install right away.…

Pobrania
97
Polubienia
4
Ocena
0
P
Printablesedi1000

Braun ThermoScan 3

This model is printable without supports. Attached is a .step file to modify.

Pobrania
97
Polubienia
9
Ocena
5
P
PrintablesAndrás Bognár

W1219 Thermostat Enclosure with GoPro Mount

This is a very simple yet good looking enclosure for the very cheap and popular W1219 thermostat module. You can use this module for almost everything related to heating or cooling. It is easily programmable and suitable for every DIY…

Pobrania
94
Polubienia
7
Ocena
0
P
PrintablesPaul

HAL 9000 Google Nest Thermostat

HAL 9000 Now in total control of your furnace in addition to your pod-bay doors! I adjusted the design of the Concentrix Thingiverse design to accommodate the Google Nest Thermostat. I've included all of the files, but use my ring design…

Pobrania
93
Polubienia
43
Ocena
0
P
Printableschrisax212

on wall housing for Beok Tuya thermostat

on wall housing/mount for Beok Tuya thermostat

Pobrania
93
Polubienia
9
Ocena
4,67
P
PrintablesMaksym

Housing for XY-T01 thermostat - plain

This is a simpler version of the housing for the XY-T01 thermostat from https://www.thingiverse.com/thing:5679000 Note 1: There is no hole for the wiring - please punch through in your editor of choice according to the requirements of…

Pobrania
91
Polubienia
6
Ocena
0
P
PrintablesBladan83

plate adapter thermostat 503

plate 503 to adapt the thermosat 502 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Household

Pobrania
90
Polubienia
6
Ocena
0
P
Printablescmoi

Bouton thermostat congelateur

C'est un bouton de remplacement pour le réglage de la température d'un congélateur armoire de marque BRANDT.( ou marque du même groupe!) Couches : 0.15 remplissage : 100% matière : PLA (idéalement blanc). J'ai modifié la jupe du bouton…

Pobrania
90
Polubienia
3
Ocena
0
P
PrintablesBobbyDazzler

Tado Smart Radiator Thermostat Cover

I needed a cover for my Tado radiator valves. After a few attempts I've settled on 2 versions. One has vents on the top, you will be able to see the colour of the original valve showing through, but it also allows the temperature sensor…

Pobrania
87
Polubienia
3
Ocena
0
P
Printablesoitenk

Uno-Vac Thermos #4 stopper w/TPU Gasket

This is the first item I have ever modeled in Fusion 360. Dad's old Uno-Vac thermos had mold damage on the original stopper. Spent a few hours modeling a new one for basic use. I'd advise PETG for the heat resistance and of course, always…

Pobrania
86
Polubienia
7
Ocena
0
P
PrintablesHedberg

Danby Mini Fridge Thermostat Knob

Print Instructions: print with support.

Pobrania
85
Polubienia
5
Ocena
0

Minimalist Hive (Mini) Thermostat Stand

A quick and simple print in two parts for a hive mini thermostat. The upright part slots into the base and stays in place. To mount the hive, simply pop the cover plate off the back of the hive unit and secure it to the stand with some…

Pobrania
84
Polubienia
3
Ocena
5
P
PrintablesFxxx

TuYa TS0601 thermostatic head clip

The latch of the battery compartment lid is often damaged. Here is the solution.

Pobrania
84
Polubienia
3
Ocena
0
P
PrintablesJosh Smith

Nest Thermostat Cover

This design is intended to create your our own flair or color scheme to the standard Nest Thermostat mounting plate. This design is intended to subtly match standard junction box covers such as light switch panels. I have two versions of…

Pobrania
83
Polubienia
10
Ocena
0
P
Printableswerz 99

Adapter for Zigbee-Thermostat

Adapter for Zigbee-Thermostat/Radiator Thermostat from M30x1.5 to M28x1.5. Bought it HERE - including 6 adapters which are crap… ZIgbee2MQTT recognizes it as a Tuya TS0601. The original mounting thread has a size of M30x1.5 and I needed…

Pobrania
82
Polubienia
10
Ocena
0
P
PrintablesAndySava

Sigg shutter (thermos)

Because I couldn't find a variant for the thermos-bottle, I put this one up here.

Pobrania
81
Polubienia
8
Ocena
5
P
PrintablesPeter H

VENTILATED THERMOSTAT HOUSING

The exhaust fan in my printer enclosure is thermostatically controlled, with all the electronics concealed in the hollow of the Lack table top. This housing encloses the instrument and the addition of a small vent should prevent heat…

Pobrania
79
Polubienia
22
Ocena
0
P
PrintablesMau_Rice7783

Adapter Rossweiner Heating Valve Smart Home Thermostat (M33x2,0 to M30x1,5)

This adapter is designed for a Rossweiner heating (M33 x 2,0) valve to mount a Smart Home Thermostat (M30x1,5) Use a filament that can withstand temperatures of 100 °C, like ABS! When I bought the thermostat, other adapters with such a…

Pobrania
79
Polubienia
3
Ocena
5
P
PrintablesJing

AQARA Radiator Thermostat E1 Housing

Orientation Recommended orientation to print: Supports Use support painting tool to add extra supports: Printing options: PETG material (PLA would not withstand high temperature) 3 wall loops 25% Sparse infill density sloped printing…

Pobrania
78
Polubienia
10
Ocena
0
P
PrintablesMajohnes

Tuya ZigBee Radiator Actuator Thermostat Smart ADAPTER

This custom-designed part serves as an adapter between a SMART thermostat “ Tuya ZigBee Radiator Actuator Thermostat Smart TRV Thermostatic Valve Temperature Controller Support Alexa Google Home Smart Lif ” and the pre-existing heating…

Pobrania
78
Polubienia
4
Ocena
0
P
PrintablesPaul3D

Bosch Smart Home Radiator Thermostat - Replacement TRV valve connector

I use Bosch radiator thermostats, last year or so, the valve broke off from the radiator, it broke at the mount, a number of the holding clips broke, I suspect this was a gradual issue over time (maybe it was over tighted when originally…

Pobrania
77
Polubienia
2
Ocena
0
P
PrintablesForfelet

M28x1.5 adapter for Netatmo radiator thermostat

Adaptor supplied (M28x1.5) were too short for my radiator. Printed in PETG 0.2mm

Pobrania
75
Polubienia
4
Ocena
5
P
PrintablesMrak3D

NETATMO thermostat wall mount

I wanted to replace my old thermostat and mount Netatmo on the same place, using same screws. So this mount has two screw holes (84 mm distance), it holds Netatmo thermostat and allows to change temperature by pressing top/bottom. Lover…

Pobrania
75
Polubienia
7
Ocena
0
P
PrintablesBerserker

Heizkörperthermostat (Radiator thermostat) Adapter Oventorp M40x1,5mm

Adapter für Standard Heizkörperthermostate auf das alte Gewindemaß M40x1,5. Ich konnte im gesamten Internet keinen Adapter für die tollen elektronischen Thermostate finden, deshalb selbst ist der Mann. Bitte in PETG drucken da diese alten…

Pobrania
74
Polubienia
4
Ocena
0
P
Printableshallonhatt

SIEMENS Coffee maker tall thermos holder

A holder for the SIEMENS EQ.6 series 300 (and probably other models) to be able to hold taller mugs and thermoses (up to 19cm). If you find another model that it fits, please tell me in the comments :) Print Settings Printer Brand: Prusa…

Pobrania
74
Polubienia
13
Ocena
0
P
Printablesdave8888

Nest Thermostat Wall Blanking Plate

This is a wall blanking plate for a Google Nest Thermostat version 3. It covers the hole and wires that are left exposed after the thermostat has been removed (to be moved to the desk stand for example). The plate is a friction push fit…

Pobrania
73
Polubienia
7
Ocena
0
P
PrintablesTim Angus

Google Nest Thermostat Heat Link Pattress/Adapter for Standard UK Back Box

If you purchase a current generation Google Nest Thermostat, to fit the Heat Link component, it comes supplied with a couple of screws which are (presumably) intended to be used with wall plugs that you supply and fit as the end user.…

Pobrania
71
Polubienia
5
Ocena
0
P
Printablesrobomaniac

Kids Thermos funtainer handle

set perimeters to max 6 for examples I use PETG

Pobrania
71
Polubienia
3
Ocena
5
P
PrintablesRadekP

Cap of Lidl Livarno thermostatic shower mixer

Replacement of Lidl Livarno thermostatic shower mixer's end cap. Print it with 0.3 layer of finer, PET-G preferred.

Pobrania
70
Polubienia
11
Ocena
0
P
PrintablesGrey

Thermosonden-Halter für Burnhard Grillthermometer

Das Modell lässt sich ohne support in 0,2mm Schichten aufrecht stehend drucken. Viel Spaß!

Pobrania
70
Polubienia
7
Ocena
0
P
PrintablesDB3DUK

Nest Learning Thermostat 3rd Gen Stand

Rear cable guide channels can direct the cable left, straight back, or right. Two M4*16 screws and two M4 hexagonal nuts required. Supports not required but can be enabled for the cable channels underneath.

Pobrania
68
Polubienia
2
Ocena
5
P
Printablescpt_dietz

Thermostat Knob

Thermostat Knob for Household appliance Outside diameter: 40mm Height: 25mm Pin diameter: 6mm

Pobrania
68
Polubienia
5
Ocena
0
P
PrintablesB&B TECH

Google Nest Thermostat - Wall Trim

Google Nest Thermostat - Wall Trim , snap off the thermostat and install around base plate (no need to remove base plate). Should cover most of the old holes from those ugly older rectangular thermostats.... except where mine had some…

Pobrania
65
Polubienia
3
Ocena
0
P
PrintablesCyril D

Delta Dore Euro-Tybox4 Thermostat cover panel

It should also work with rev1. Other thermostat may share this design It was designed without the lost original part but it's matching the device.

Pobrania
65
Polubienia
0
Ocena
0

W1209 Case Digital Thermostat

Protective case for the w1209 module with access to the screws and external buttons. Includes various mounts for the temperature sensor, allowing it to be mounted on surfaces.

Pobrania
64
Polubienia
6
Ocena
0