766 modeli
Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…
Wydruk około 6,89 €–8,42 € nettoWstępna wycena jednego wariantu
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Wydruk około 2,98 €–3,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Full Text: Rocket 2.0 Passthrough: Creativity in Full Thrust Introducing the new Rocket 2.0 Passthrough model, combining simplicity, functionality, and innovative passthrough design. This rocket opens up endless possibilities for vibrant…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and…
Wydruk około 5,72 €–6,99 € nettoWstępna wycena jednego wariantu
Replace the original “house” with this one, and you will eliminate the 50% throttle stop as well as increasing the throttle friction. The friction is increased by having a more compressed spring due to the “shorter” inside. The 50% stop…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
accessories for sequential ordering attach the bottom plate add pins add rubber bands according to the required strength screw the top part 4x M4 print: material PETG perimeter 4 layer height 0.1mm filling 15% gyroid supports no old model:
Wydruk około 1,93 €–2,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This basic thrust ball bearing was designed for use with 6mm Airsoft BBs, which are cheap and very spherical (5.95mm+/-0.01mm). I purchased 1000 on Amazon for about $3.50 + shipping. The balls travel on a 40mm diameter raceway. The…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…
Wydruk około 14,82 €–18,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is probably the simplest form of hanging your Thrustmaster wheel from your wall. There are no mechanical or moving parts, just a simple form-fit that holds really well and is printable with any printer out there. I recommend printing…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
Backstory Inspiration came from the creator @yunayuna0522 on TikTok who uses an adjustable wrench instead of a shifter rod in her purple Honda S660 build My version connects to the Thrustmaster TH8S for a similar look and feel. Printing…
Wydruk około 6,13 €–7,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the ALTN Pitch Trim Lever for the PMDG 777-300ER MSFS 2020. Made for the Thrustmaster Bravo Throttle Quadrant. Fits great works great, enjoy.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Watch this video for more information:
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
First version of a drone based on a 90mm ducted fan capable of hovering using a thrust vectoring control system made of four jet vanes independently controlled by high speed heli servos. The stability is achieved through body angular rate…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and all addons 5 perimeters to screw and head of screw…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
Desk mount for a Thrustmaster T16000M HOTAS. This design will lock the mount in a forward position, so it's best placed either in front of you, or closely off to the side. This assembly is not entirely customizable like other models…
Summary A phone holder for the Thrustmaster T300 (RS) wheel. Currently fitting my iPhone 12 very well, but similar phones might also work. Very nice in combination with the Simhub Dash to show some metrics during sim racing. Printing…
Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…
This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…
Introduction With this adapter, you can hard-mount your Thrustmaster TMX or T150 steering wheel (T128, T248, T-GT II, T300, TX, TS, T500, 458, T80 models as well). It's quite an upgrade from the OEM clamp-style racing-fixation-kit-fk2…
Mount for fixing Thrustmaster T-LCM pedals to your Playseat Challenge. Print 4 brackets, screw them to the pedal base and fix it with zip-ties. Done! You need more simracing parts? Hace a look:…
Tired of your throttle sticking? Use real bearing, either metal or polymer. With adjustable detent. Personally I fly helicopter so I skipped detent, but great to have the possibility. Re-upload of ADU-labs Thingiverse files . Such a great…
I made my own air surfboards in Fusion for surfing the wind out of a car window. They can also be used as decorations, perfect for hanging from the rearview mirror of your VW Transporter or bug. you can also play with them in the bath :)…
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
Summary: Have you ever thought of attaching a Motor to your inflatable Stand Up Paddle Board? I have but I don’t like the ones you can buy, so I made this: This Stand Up Paddle Fin is designed for the Apisqueen U92 underwater thruster…
There are 3 files available on this page : 1/ The DESIGN PIECE is the most important one. You must use it as the base to design your own knob that fits around the piece. 2/ The ADAPTATER is the part needed to mount your knob on the…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG For better durability, 100% Infill Printer used for prototyping: Prusa MK4 Type of bed used for prototyping:…
Added a V2 which provides a much better fit on the shaft than my first version. I've also extended the lip as it tore off on the first version.
Introduction The weak link in the less expensive Thrustmaster steering wheels is the plastic gear and optical timing wheel. Over time it can wear out and with enough force, it can strip teeth. I was inspired by the Thingiverse models…
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease. Should…
This is not my design. It's a joystick remix of a gimbal designed by user Karavan on IL-2 Sturmovik forum: https://forum.il2sturmovik.ru/topic/13252-3d-печатная-механика-объект-77-б/ and shared on Thingiverse and v2 on Thangs. Images and…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers, 4 perimeters and infill 15% for the main body 100% infill to little parts Support is needed…
Made on a colleague's request. Because it's oriented at 35°, no supports are needed. Print it as is. Ø 0.4 : Layer height : 0.25 mm Perimeters : 1.2 mm Bottom/top : 1 mm
Print with supports, I used .12 layer size for better detail. I only printed a palm sized one, but it should scale up fine as needed. This is v1, I plan on making the turret rotate next, then adding opening doors.
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of screw…
A rotating base for turrets, pan-and-tilt mounts, launchers, and swinging arms. The ring gear opens to an 81mm inner diameter. A thrust bearing stack carries the ring, so it takes the radial load from the ring itself and the lateral push…
Now we have more Barbatos armors, wait for more. Barbatos D-13 will be real. D-13 = Dummy 13
This upgrade is used to remedy the increased resistance of the Thrustmaster T.16000M throttle after some time. It is possible to add magnets to the model to get magnetic detents at the 50% position. For this you have to glue the Magnet_50…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability and rigidity, add : 6 first and last layers and 4 perimeters to basement and mouseplates 5 perimeters to screw and head of…
Hi Internet Sim Peeps, At request, I've whipped up a TMX/T150 to stock Thrustmaster Quick Release hub adaptor. Now, I want to preface this with the fact that I don't have a TMX or T150. I've used reference images and materials to gather…
Thruster Guard: A Southern Ocean Subsea Creation Enhanced Durability: Designed specifically for the BlueRobotics T200 Thruster . Protection: Offers a robust shield against unpredictable underwater elements. Performance-Oriented: Carefully…
Hi Internet Sim Racers! After remaking the Logitech base to Thrustmaster Adaptor... it was minor mods to make the locking rig into a wall mount for your spare Thrustmaster Wheel Rims... There's 3 versions. A) Thrustmaster Rim Wall Mount…
Hall Sensor Bracket replacement for Thrustmaster T300 T300RS TX Worked for me, use supports and enough infill. Hope it helps someone
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
A fully 3D printed RC harbour tug with a working azimuth stern drive. The two pods rotate 360°, giving it the same rudderless maneuverability as a real ASD tug — spinning on the spot, crabbing sideways, and full thrust in any direction.…
This is a completely original model, and is the result of 16 different iterations on the design. I tried to create the most modular (for future adaptability to other wheels) and compact unit as I possibly could and printable without…
This part is designed to hold the hall effect sensor in a Thrustmaster Warthog joystick when used with the ball bearing gimbal v2.0 by Psyrg https://www.thingiverse.com/thing:4550666 Please calibrate after installation using Thrustmasters…
make sure to use a small m3 bolt and nut to properly attach the knob Final version V4 uploaded, rod now fits snug in hole, handle fits without touching surrounding plastic and handle was thickened for easier use.
This .scad will generate a ball bearing retention ring of any size you want with any number of balls! I created it to work with Airsoft pellets (BBs) but it will work with any ball or sphere shaped object. The idea is to use this in a…
Remixed the popular offset extensions for Virpil/Thrustmaster to add more lengths and distance
A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm
WARNING - You need to determine if your printed mount is strong enough based on your setup and equipment. You should not only check that the mount is sturdy enough by your own standards, but you should also check the clearance of the…
Printing recommendations I've printed a first prototype in PLA, we'll see how long it lasts. Might print an ABS/ASA one and vapor smooth it for better finish. 0.15 LH 0.4mm nozzle No supports required Use high infill (I've used 50%) to…
I designed a screw on shift knob for the Thrustmaster TH8A shifter. Just remove the old one and screw on the new printed one with a little presure from above. I used PETG.
This is a thrust tube for a Dr. Mad Thrust 70mm EDF and designed for high speedsot an aerospace engineer, but i tried to design it as good as possible, and after schübeler's description on their website:…
Hi Internet SimRacers!! Updated 28/06/2020 - Added Logitech Wheel to Thrustmaster Quick Release thread, for connecting your original Logitech wheel to the new Thrustmaster adaptor or a Thrustmaster wheel base.. for .. some... reason...…
Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…
Technical information for the Joystick Mount files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and all addons 5 perimeters to screw and head…
This is Magnetic Paddle Shifter MOD for Thrustmaster T300 RS. BoM: 1x 5mm or 8mm bracket 1x M3x10 1x M3 nut 4x 10x3 (or 8x 10x2) mm Neodymium magnets 1x 2-component adhesive (Epoxy) Video: https://www.youtube.com/watch?v=PORMB1qgojM Print…
A 360° thrust vectoring unit for 70mm EDF's. The unit should be scalable as it originates from a smaller design, plus you have the ability to tighten the nozzle via a screw helping you with tolerances. The ball joint has an inner diameter…
I was looking around for something suitable to add thrust bearings to my Ender 3v2 and there was nothing that really suited what I wanted to do. Most of the ones that I've seen attempt to support the outside of the bearing and keep it…
I have noticed many people having problems with the USB-C port on the back of the T598 Wheel being loose/breaking off. It's best to contact Thrustmaster for a replacement, but I wanted to make something that would secure the cable…
UPDATE 01/11/26 After intensive use and testing different force feedback settings, I noticed the power plug could still move vertically and disconnections may occur on high torque operations and/or ingame hard impacts, either recovered…
Description This pack currently includes: Phone Stand V1 Phone Stand V2 DualSense Controller Stand Some models require screws and nuts for assembly depending on the accessory. List of items to print for phone stand V1 model : 1 Arm 1 Base…
Study mount to attach a T16000m HOTAS system to a Poang chair. It's a bit long of a print and requires eight M5x40mm bolts, and eight M5 nuts, but it's secure, adjusts back and forth, and easy to assemble. Tolerances should be big enough…
The Thrustmaster T.Flight Hotas works fine on a table. However it's not the natural way to fly. If you separate them, there's no easy way to attach either side to anything and it doesn't work either. So here's one of my solutions. Put it…
Was going to install on a plane, but didn't want to disassemble it to install. Its made for a 64mm edf but could most likely be scaled up or down for a larger or smaller edf. Will require 2 servos, I'd recommend at least 9g if using a…
This is Thrustmaster T.Flight Hotas X for my office chair, easily adaptable for most chairs - just put some foam between chair_clamp_bdy1 and chair_clamp_bdy2 and scew it tight. The elements named right and left are simmetrical except for…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
Print with supports and I used .12 layer height for better detail
Thrustmaster TMX f1 wheels
for 6 pin aftermarket wheel
Mechanical, threaded adapter to attach Thrustmaster grips to Winwing Orion2 base. Can be used with FS Projects Airbus sidestick grip. Wiring needs to be modified to change from 6 pin mini DIN to 5 pin mini DIN. Picture of wiring (found on…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : Infill : 15% 4 perimeter layers Print the base in the orientation you prefer, depending on where you want the…
This is a fully parametric 3d-printable thrust bearing cage, using cheap ball bearings to provide reliable motion. I needed a thrust bearing in a weird ID/OD combination for a low-load situation, and couldn't find anything reasonably…
The original TFRP Pedals are quite slippery and do not feel like real aircraft pedals. To improve grip I designed a simple footrest which can be easily screwed on top of the pedal with the original screws. Print in PETG since some…
This is a remix of https://www.thingiverse.com/thing:4076523 and the thrustmaster coupler from https://www.thingiverse.com/thing:3393638
Give your sim-racing setup a cobra-inspired shifter knob with a flared hood, detailed scales, a segmented belly and sculpted fangs. Cobra 90 has a shortened neck and a widened grip surrounding the mounting socket. The scale detail…
Using these parts one can replace the low quality potentiometer in the T16000M yam axis with a hall effect sensor. You will also need: A1324LUA-T hall effect sensor two 5x2mm N52 magnets see…
This model provides a cheap and universal means for reliably measuring the static thrust of your brushed or brushless motors. It is powered independently of the motor, allowing a wide variety of configurations to be tested. Build Video…
Press Like for encouragement. Comment for improvement. Adaptor Virpil/Thrustmaster base to VKB NXT grip and vice versa. It hasn't been tested since I do not own a VKB. Thanks to crash1983 for the VKB interface! Note: 3D-printed plastic…
Description WARNING - You need to determine if your printed extension is strong enough based on your setup and equipment. There's no way I can guarantee this model won't fail. There are too many variables including the quality of the…
Remix from the nice design Slowly I've used the thread from the original and made some adjusts to the thickness and also added a cut for to fit those 70mm Aliexpress drift style wheels with horn. It should work with T500, T300, TX and…
Hi Internet Sim Racing Fans, Another quick upload by request. This is a remix of my original 70mm PCD Thrustmaster hub adaptor. Except this one is rotated 30 degrees to fit this…
This is mini-Din 6 pin connector (SPI serial protocol) for Thrustmaster steering wheels. Solder wires and use hot-glue gun to fix connector in place. Nice video guide is here: https://youtu.be/Hg58OLH7puU?t=345 Print Settings Printer…
you should print this with supports and the infill density doesnt matter to much but also dont change the scale from what I have for it to fit. This is small and only takes 5 grams of fillament and it works on the Thrustmaster TH8S shifter.
Should you need to print replacement grips, or want to convert a left to right handed grip, these scans should get you started.
I added a thrust bearing to the HotWheels clamp. This stops the tip of the screw from moving around as you tighten, it also makes it turn easier to get the clamp tighter. Other than the printed parts you need 1 x 5mm thrust bearing 1 x…
Purpose Simple addon to the back of Thrustmaster P310 (and other similar rims*) that converts them to magnetic paddles. Makes the feel of the paddles feel much more premium, and provides a nice solid point where the paddles aggressively…
Description This mount can attach a Thrustmaster T.Flight HOTAS 4/One/X to an Ikea Poäng chair. Materials 6x M5 screws 35mm for vertical, three for each holder. 4x M5 screws 30mm for hinge, two for each holder. 10x M5 hex nuts. 4x M6…
Please check the excellent description on the original model that contains all relevant materials and print settings. Just in case, I've attached that model's description as a PDF under this model. You might need to reverse the plate,…
