Wyniki wyszukiwania: towe

Sortowanie

Liczymy pasujące modele…

P
PrintablesTronnic

All in One Temperature & Bridging Tower - PLA & PETG GCode included

A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…

Pobrania
85 623
Polubienia
4724
Ocena
4,83
P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Pobrania
34 681
Polubienia
2168
Ocena
4,9
P
PrintablesdePrintinator

Contemporary Dice Tower/Storage v2

Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…

Pobrania
11 277
Polubienia
3664
Ocena
4,91
P
PrintablesDJGummikuh

Stringing Test / Temp Tower

Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…

Pobrania
10 001
Polubienia
182
Ocena
5
P
PrintablesPrint-3D

Speed tower - test your maximum print speed

I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…

Pobrania
9768
Polubienia
477
Ocena
4,76
P
PrintablesPrusa Research

Extruder linearity correction calibration tower

This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA

Pobrania
8343
Polubienia
686
Ocena
4,88
P
Printablessteveleader

Prusa Mini Temptower for PLA, PETG and ABS

This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…

Pobrania
8051
Polubienia
340
Ocena
4,87
P
PrintablesFlyboyEUC

Collapsible Dice Tower

This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…

Pobrania
6439
Polubienia
1416
Ocena
4,89
P
PrintablesHD_Creator

Self releasing geared clamp hook for towels

Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…

Pobrania
5740
Polubienia
3272
Ocena
4,76
P
Printablesgeektoybox

Temp Tower PLA/PETG/ABS/ASA for MK4

Please don't forget to like the model if you find it useful. Thanks!

Pobrania
4889
Polubienia
292
Ocena
4,83
P
PrintablesPrusa Research

Homing Tower

On the Original Prusa XL , adjusting the belt to the optimal tension is crucial to achieving good quality on the prints. Here is a detailed guide .

Pobrania
4835
Polubienia
157
Ocena
4,68
P
PrintablesMitch

Temp tower(ready to go)

Sliced at .2 mm (Quality) profile. temp change will happen, you dont have to do anything.

Pobrania
4629
Polubienia
171
Ocena
4,65
P
PrintablesDaHouzKat

The GREATEST Towel Hooks Remix

From the well received GREATEST Towel Hook V2 now an Remixed Version that can be hang on a door without using tape or screw I really liked the original model but i didn't want to attach it with tape or screw, so i remixed it to be hang on…

Pobrania
4382
Polubienia
1572
Ocena
4,98
P
Printablesdroidik

Prusa Mini retraction tower (PLA, PETG)

1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Pobrania
3900
Polubienia
128
Ocena
5
P
PrintablesPeter Farell

Wicked Skull Dice Tower.

Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…

Pobrania
3401
Polubienia
1136
Ocena
4,92
P
Printablesphrogpilot73

Ender 3 V2 Temp Tower PLA

Included is a ready-made gcode for Ender 3 V2 temp tower for PLA. Bottom layer (below the test tower) is at 205 to ensure adhesion as print starts. E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps.…

Pobrania
3382
Polubienia
104
Ocena
5
P
PrintablesJonas

Dice Tower - 2026 update

Can be printed as is, without supports The design itself is based on the model by Juliuis3E8 on thingiverse. Main difference is that my design is a single piece print and I added some minor tweaks (like the windows) and an extension of…

Pobrania
3336
Polubienia
343
Ocena
4,97
P
PrintablesRxR

Modular Dice Tower Castle Stairs

"Building a tower is an art. Building the tallest tower is a masterpiece! Take it from a wisard." - Saruman the White - Here's a remix of the fabulous "Dice Tower Castle Stairs" by Squinn , for players who want to touch the sky (or for…

Pobrania
3106
Polubienia
791
Ocena
4,87
P
Printablesdjedje_zr7

Fantasy Dice Tower

Finally finished! More difficult to design than I expected. Printing the portal is optional. No support needed. I'm trying to design the tower and the portal to avoid supports, use the minimum amount of plastic, and look pretty cool. I…

Pobrania
2878
Polubienia
552
Ocena
4,9
P
PrintablesPeter Farell

Dragon Dice Tower

Dragon Dice Tower. New Version is Up. (11/12/2024) 2:13 PM (CMT) fixed bottom, enlarged exit door, and added dice ramp.

Pobrania
2842
Polubienia
683
Ocena
4,43
P
PrintablesTechromancer

Modular Dice Tower

Modular Dice Tower Print instructions .1 Layer height, 35mm/s. Filament PM Galaxy Silver. 65+ hours

Pobrania
2822
Polubienia
478
Ocena
4,81
P
PrintablesDaHouzKat

Dice Tower

Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…

Pobrania
2690
Polubienia
672
Ocena
4,82
P
PrintablesJonesSepp

Dice Tower

I use this dice tower to clearly distinguish the dices from each other (e.g. left: number of turns, right: action to perform). The tower and the two cases are both easy to print. I used PLA with a layer height of 0.2mm on a 0.4mm nozzle.…

Pobrania
2637
Polubienia
815
Ocena
4,7
P
PrintablesTommy Zero

Mini temp tower

Filament length Less than 3m Filament weight Less than 7g To save filament and time, the smaller the temperature tower, the better. 280~235℃ for ABS,PC,PETG 240~195℃ for ABS,PETG 220-175℃ for PLA,TPU The model is small, but the…

Pobrania
2243
Polubienia
107
Ocena
4,93
P
PrintablesKilinar

Temperature towers for PLA and PETG. GCODE for ELEGOO Neptune 3 Pro included

Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro

Pobrania
2183
Polubienia
67
Ocena
5
P
Printablesgiveen

Barad-dûr (Sauron's tower) dice tower

Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.

Pobrania
2175
Polubienia
462
Ocena
4,82
P
PrintablesMichael

Towel hanger - the better towel loop

A quick and easy print to make your life a tiny bit easier. In my experience towel loops tend to break, or they are too small or too hard to find. This hanger fits every towel, both kitchen and bath towels, and is big enough to handle…

Pobrania
2170
Polubienia
533
Ocena
4,98
P
PrintablesTiques77

Tour Eiffel (quatre pièces)/ Eiffel tower 30 cm (four parts)

Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.

Pobrania
2084
Polubienia
213
Ocena
5
P
PrintablesDaveDude

Balcony Strawberry Tower with IKEA Persillade Modular Hydroponic

Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…

Pobrania
1760
Polubienia
497
Ocena
4,75

Towel hook

Designed for bathroom heater with tubes of diameter 25mm (fi) and distance between tubes 9-11mm (gap). I discovered that distance between are randomly, so I decide add some “spring” to make locked mounted even that. Print on side - like…

Pobrania
1743
Polubienia
514
Ocena
4,86
P
Printablesphrogpilot73

Ender 3 V2 Temp Tower PETG

Included is a ready-made gcode for Ender 3 V2 temp tower for PETG. E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps. Comment out line 20 if you don't have BLTouch/CRTouch.

Pobrania
1722
Polubienia
64
Ocena
5
P
PrintablesRingarn67

Updated 220811 Ultimate All-in-One Temperature and bridging Tower (Auto Temp Setting)

Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…

Pobrania
1701
Polubienia
132
Ocena
4,67
P
Printablestoddanglin

MagicBand+ Charging Tower

Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…

Pobrania
1559
Polubienia
163
Ocena
4,8
P
PrintablesKehet

Dice tower with self loading mechanism

UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…

Pobrania
1522
Polubienia
869
Ocena
4,61
P
PrintablesTrevor Petski

Beach Towel Clip

A clip to hold a towel to a beach chair.

Pobrania
1514
Polubienia
172
Ocena
4,86
P
PrintablesC. Polke

Simple Towel Hook

Easy to print kitchen towel hook. Holds several towels and if printed with 100% infill its way stronger than it needs to be. Dimensions: Height: 35mm Width: 10mm Length: 18mm Perfectly fits a Spax 4,0 x 20 mm universal screw for mounting.…

Pobrania
1202
Polubienia
115
Ocena
4,91
P
PrintablesLukas

Fantasy Dice Tower - mini v2.0

Added base, connected gate, cutted few floors. v2.0 - Bigger exit gate so it will not block more dices. Smaller gate for better view for dices.

Pobrania
1158
Polubienia
143
Ocena
5
P
PrintablesFredslund

PRUSAMENT Sorting Tower MK3

Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features! Printing If you just wan to get started printing, just take the G-Codes or the .3mf slicer files…

Pobrania
1006
Polubienia
502
Ocena
4,82
P
Printablestuc0w

Ender 3/5 PLA Temp Tower (BLTouch + Brim)

Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…

Pobrania
879
Polubienia
22
Ocena
4,8

Antique dice Tower

Dice Tower with a spiral staircase in antique style The model consists of three parts - spiral stairs, balcony and top cover. You can use the inside of the column to store the dice No supports are required, but this model will test your…

Pobrania
875
Polubienia
369
Ocena
5
P

Dice Tower

This is a dice tower I designed for my local D&D club, and is the first 3D object I have uploaded to the internet. I works surprisingly well, and helps prevent cheating on dice rolls. Print instructions On an I3 printer, print at the…

Pobrania
815
Polubienia
52
Ocena
0
P
PrintablesGralastair Bean

fast 30 min temperature & bridging tower MK4S HF nozzle

Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…

Pobrania
811
Polubienia
87
Ocena
4,8
P
PrintablesBigBrain3D

The original Retractable Purge Mechanism, for MultiColor 3D printing, Replaces purge blocks & wipe towers

Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…

Pobrania
778
Polubienia
172
Ocena
4,6
P
PrintablesTheZeroBeast

TZB MK3S:MK2.5S/MMU2S Extruder (MMU2S NO TOWER!) V2

This design is now outdated, V3 can be found here https://www.prusaprinters.org/prints/66215-tzb-mk3smk25smmu2s-extruder-mmu2s-no-tower-v3 This is for use with PRUSA i3 MK3S, MK3S:MMU2S & MK2.5S printers. Designed to be used with…

Pobrania
776
Polubienia
56
Ocena
5
P
PrintablesHawwwran

Better Bathroom radiator heater towel hook hanger

Simple and stable hanger hook. Click fits Stays tightly on place 2cm rail diameter Print instructions PETG is the best, but PLA works great as well. 0.3mm layer height is just fine.

Pobrania
765
Polubienia
115
Ocena
4,83
P
PrintablesFiz105

PRUSA XL Temperature Tower .4mm nozzle PLA,PETG

Just download the G code and print!

Pobrania
756
Polubienia
36
Ocena
3,5
P
Printableswedgeworks

PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping

Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…

Pobrania
723
Polubienia
39
Ocena
5
P
PrintablesSuperon

Easy to print Tank keychain - Tiger 1, Centurion (with rotating tower)

Two tanks with a hole for a keychain Centurion has a rotating tower Print in place few supports needed scaleable 25-40min print time, PLA, layer height 0.3mm

Pobrania
694
Polubienia
43
Ocena
5
P
PrintablesOzzy The Artist

Dice Tower & tray: cthulhu

A friend of mine wanted this printed for her. The cutout graphic in the original dice tray (included .stl file) did not print as well as I would have liked (undesirable top layer finish) so I remixed the tray without the cutout. Printed…

Pobrania
690
Polubienia
140
Ocena
5
P
Printablesdroidik

Prusa MK3S+ retraction tower (PLA, PETG)

0.5-2mm retraction tower that takes about 40 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Pobrania
689
Polubienia
18
Ocena
4,67
P
Printableslollo1188

Ikea SKADIS Towelholder

Simple Holder for Towel on IKEA SKADIS Pegboard Better to print it with 100% infill Reuploaded from https://www.thingiverse.com/thing:2849398 by CSD_Salzburg

Pobrania
675
Polubienia
189
Ocena
5
P
PrintablesRothamun

Over the shower door robe and towel hook

For shower stalls that don't have a towel bar. Hang this over the frame and you can keep a bathrobe and a bath towel handy and dry, just outside the door.

Pobrania
649
Polubienia
74
Ocena
5
P
PrintablesJB

Small Temptowers+wait for Tempchange with retraction

Like me, if you dont have time, or just not enough filament, just use the smaller Temptowers. Based on the "All in One Temperature & Bridging Tower - PLA & PETG GCode included" from Tronnic, and the remix “Prusa Mini Temptower for PLA,…

Pobrania
612
Polubienia
33
Ocena
4,91
P
PrintablesJonHart

Temp Tower PETG Core One

Remixed for the Core One

Pobrania
590
Polubienia
47
Ocena
3,67
P
Printablesckassoff

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Pobrania
590
Polubienia
33
Ocena
5
P
Printablesoanstein

Extension for TowerGarden (Hydroponic System)

Accessories for the TowerGarden – towergarden(dot)com Instead of the two upper floors of herbs, you now have 8 more normal places at half height. Requires 12xM4 12mm screws and matching nuts Only chemically inert and food-safe materials…

Pobrania
525
Polubienia
81
Ocena
4

Gringotts Dice Tower

Gringotts Bank Dice Tower - A cool dice tower I found on Thingiverse I added in a little extra support on the back nothing to fancy just to help it print a little better. The STL file is not scaled up but should roll a standard D20 just…

Pobrania
490
Polubienia
109
Ocena
5
P
PrintablesCUBE3DWORLD

Orthanc, Tower of Isengard for Echo Dot 4th / 5th Gen

Orthanc, Tower of Isengard from the Movie "The Lord of the Rings". It is a decorative Stand for Echo Dot 4th Gen. Suitable Device: Echo Dot 4th Gen: https://amzn.to/3eIkdu4 How-To-Print: Recommended Layer Height: 0,3 mm Support: No…

Pobrania
487
Polubienia
108
Ocena
4,5
P
PrintablesLukáš Toman

FDM Eiffel Tower FDM

CZ-Měřítko jeho 220 mm, 240 mm upscale show být v pořádku Výška vrstvy 0,2 nebo 0,3 (foto je 0,3) Obvod 2 nebo více Na výplni opravdu nezáleží, odešel jsem jako 10% Gyroid horní vrstva 0,6 mm+ takže 2 pro 0,3 mm nebo 3 pro 0,2 výšky…

Pobrania
477
Polubienia
29
Ocena
5
P
PrintablesSusanov

PLA/PETG Temperature towers + GCODE for Ender 3 V3 SE

Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.

Pobrania
475
Polubienia
11
Ocena
0
P
PrintablesJarda

Hydrophonics Moduled Tower

Hydroponics Moduled Tower (inspired by Hydroponics Tower from https://www.thingiverse.com/thing:2403922 and partially https://www.printables.com/cs/model/63055-upgraded-modular-hydroponics-tower-more-compact-st ) is designed to be…

Pobrania
460
Polubienia
64
Ocena
0
P
PrintablesNUeB

DJI mini 3 pro Cooling Tower / Display stand

DJI's mini 3 pro drone has no internal fan. When powered up but not flying, the drone tends to overheat and shut down after some minutes. This can be very annoying, especially during firmware upgrades. This model is a drone display stand…

Pobrania
446
Polubienia
85
Ocena
4,8
P

Mini Tower Computer Case for the Raspberry Pi 5

Mini-Tower Computer Case for the Raspberry Pi 5 with acrylic windows and NVME daughter board. Any NVME HAT should do the trick but I used the slim ElectroCookie one for its minimalist style and quality. The case clips. You can add a M3…

Pobrania
406
Polubienia
191
Ocena
0
P
Printablescalebc

230-190 PLA Temp Tower

unless it copied my script into the model you'll have to set it up. here's the layers with temp in case it doesn't. 20% infill layers 13 230 layer 47 225 layer 81 220 layer 114 215 layer 148 210 layer 181 205 layer 215 200 layer 248 195…

Pobrania
401
Polubienia
15
Ocena
5
P
PrintablesFredslund

PRUSA Sorting Tower MK1

Check out the new version: https://www.prusaprinters.org/prints/55640-prusa-sorting-tower-mk2 don't know what to do with your old prusa spools? make a sorting tower so you can organize all your small parts. works for all prusa spools!!…

Pobrania
400
Polubienia
145
Ocena
4,67
P
PrintablesJake White

MK3S PLA Temp Tower [Fixed]

Only confirmed to work on the MK3S so print at your own risk otherwise. Sliced with basically the default PrusaSlicer settings at 0.2mm layer height.

Pobrania
380
Polubienia
7
Ocena
5
P
Printablesbenoitmeunier

Moses Hightower for Sanding Discs

It is designed to be modular to provide flexible use. The demi-spheres provides guides for easy gluing and you can print the grit number in 20 pt on a 3/8 ''(9mm) labels with any Dymo Label maker.

Pobrania
367
Polubienia
91
Ocena
4,5
P
PrintablesHammerTech3D

PLA Temp Tower - Prusa Core One / Core One + | Balanced / Speed / Structural (195°C - 235°C)

PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…

Pobrania
333
Polubienia
14
Ocena
5
P
PrintablesGralastair Bean

PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…

Pobrania
327
Polubienia
36
Ocena
5
P
PrintablesCactus zim

worm dice tower

found this online and thought it was cool Original model: https://cults3d.com/en/3d-model/game/purple-worm-dice-tower Creator: https://cults3d.com/en/users/LittleTup/3d-models

Pobrania
325
Polubienia
54
Ocena
4
P
PrintablesMiguel M.

Over Door Towel Bar

A simple towel holder that allows you to hang a hand towel to a cabinet or vanity door. Printing There is nothing special about printing these. No supports. 20% infill is fine. I personally print with 3 or 4 perimeters to add a bit of…

Pobrania
323
Polubienia
113
Ocena
0
P
PrintablesRxR

Aria The Dragon for the Dice Tower Castle Stairs

"Why settle for a dice tower when you can have a dice tower with a dragon? Everything is better with dragons!" - Daenerys Targaryen - Transform your gaming table into a legendary kingdom with this majestic dragon, a remix of Aria the…

Pobrania
322
Polubienia
63
Ocena
4,85
P
PrintablesRobertusMaximus

SCI FY Tower Terrain

Another incredible SCI FY terrain piece! This tower is made to process the toxic choking atmosphere of the incredible dirty industries that rule within the endless city-state megalopolises of the White Desert. Even the retched standard…

Pobrania
321
Polubienia
61
Ocena
5
P
PrintablesRosti

Dice Tower - Folding (Flat-Pack)

‘Sägertorn’ is a flat-pack dice tower. Not appearing at an Ikea near you any time soon. It incorporates 3 tumbling slats and a discharge ramp. Board games pack flat, why shouldn’t the dice tower? This tower can pack-flat into the top of…

Pobrania
313
Polubienia
83
Ocena
0
P
PrintablesRobC

Paper Towel holder v2 for Ryobi Link

Simplified version of my Paper Towel holder for Ryobi Link . Print recommendations: Layer Height: 0.30mm Supports: None Infill: Gyroid 10% Filament: OVERTURE Grass Green PETG.

Pobrania
306
Polubienia
77
Ocena
5
P
Printablesneale

Small Parametric Temperature Tower

A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…

Pobrania
287
Polubienia
18
Ocena
5
P
PrintablesCtihy

KARAK - věž na dlaždice / tile dispensing tower

Výdejní věž na dlaždice hry Karak upravená tak, aby pasovala do mých insertů. Pojme všechny dlaždice včetně rozšíření Regent. Víko lze zvolit: jednobarevné bez draka jednobarevné s drakem dvobarevné s podbarveným drakem (stáhněte upravený…

Pobrania
286
Polubienia
24
Ocena
5
P
PrintablesKation

recyclingbin dice tower

Cool looking dice tower

Pobrania
283
Polubienia
68
Ocena
0
P
PrintablesPeter Farell

Zapotec Dice Tower.

Zapotec Dice Tower.

Pobrania
282
Polubienia
90
Ocena
0
P
PrintablesSentient Matter

Tiny Tower: helps you make perfect fits

This Tiny Tower helps you print good-fitting parts. No more need to print multiple gauge blocks to find the required clearance. Tiny Tower does it in 2 parts. A 5.7 degree taper angle works like a magnifying glass. It magnifies the…

Pobrania
281
Polubienia
35
Ocena
5
P
Printablesmozgy

Temp and Bridge Tower - GCodes for MK4 and XL

Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle

Pobrania
267
Polubienia
20
Ocena
5
P
Printables3DBob

Creepy Hand - Dice Tower

EDIT: I added another model with a larger hand and chute. This original hole is about 30mm, and the Large version is almost 40mm. I kept this model as a single piece, accepting the trade off of more supports for no glue. This model is…

Pobrania
261
Polubienia
100
Ocena
5
P
PrintablesJonHart

Temp Tower ABS Core One

Remix for ABS on the Core One

Pobrania
259
Polubienia
29
Ocena
5
P
PrintablesTimeOut@Home

Another Dice Tower v2 Compilation

I first ran across “Yet Another Dice Tower v2” years ago and printed many copies for myself and friends. Since then I have lost the files and it appears that the original model is no longer available. There are many derivatives of the…

Pobrania
258
Polubienia
61
Ocena
4,5
P
PrintablesRegan Maloney

Leaning Tower of Pisa Bookend

File is for an approximate 15cm tower but scale up or down based on size of books. Bottom is thin and flexible, meant to slide under books. My 0.3mm test print (attached gcode file) printed no problems without support.

Pobrania
250
Polubienia
108
Ocena
5
P
PrintablesJohn Simonsson

bathroom hook for towels

not much here just use the included gcode file and print. Attach to your wall using screws

Pobrania
248
Polubienia
36
Ocena
5
P
PrintablesChris Truebe

Mini Collapsible Dice Tower - PIP

I love having a dice tower to roll my dice, but I have not found one that is easily portable. So, I made one that is not only as small as a soda can (width wise) but is also my first print in place model. The base is able to be snapped…

Pobrania
248
Polubienia
39
Ocena
4,33
P
PrintablesAcE Krystal

The Next Towel // more hygiene, style and fun

The towel solutions that gives people their preferred level of hygiene. The impatient : Are you the type of guy that just doesn't care and dries his hands on what ever is in reach? No problem! The basket is made out of the original towel…

Pobrania
243
Polubienia
155
Ocena
0
P
Printablesskypy

Tiny Distance Tower Test - Retraction / Extrusion / Bridge ..

Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…

Pobrania
238
Polubienia
9
Ocena
5
P
PrintablesTommy Zero

Temp tower for interlaminar strength test

Filament length Less than 2.5m Filament weight Less than 6.5g You can easily test the strength of the filament with leftover filament.The model has a cutout for easy breakage, so you can feel it break at the center of the letter. 260~235℃…

Pobrania
236
Polubienia
17
Ocena
5
P

Medieval Dice Tower now 100% more Crenelations!

🎲 Presenting the "Medieval Dice Tower" - Your Ticket to Gaming Glory! 🏰 Tired of dice taking unplanned vacations during your epic DND/RPG quests? Say farewell to the chaos and roll like royalty with our 3D printed Medieval Dice Tower! 🌟…

Pobrania
236
Polubienia
13
Ocena
0
P
PrintablesHuKru

Prusa Mini+ Prusaslicer Temperature Tower (All-in-one)

Needed a MINI+ version with the setup so i combined all of the information from the 4 remixed models

Pobrania
234
Polubienia
15
Ocena
5
P
PrintablesCarter

RPi4 Ice Tower Cooler Case

Cover modified to Fit HexCase Cover added clearance to IceTower by .5mm per side Base modified to match HexCase Snaps (interchangable) Collabortive Project with WeakNerve ( https://www.prusaprinters.org/social/9859-weaknerve/ ) Concept…

Pobrania
225
Polubienia
23
Ocena
5
P
PrintablesDan Rogers

Seed Starting tray for Hydroponic Tower grow cups

A simple rack that holds hydroponic tower grow cups upright while establishing roots in a seed starting. Blacks out the water area underneath of the tray to discourage algae growth. Once the seedlings are established and there are roots…

Pobrania
220
Polubienia
54
Ocena
4
P
Printablesj.pinter

Dice tower Slavin

Rozhledna Slavín uzpůsobena jako herní věž. Model rozdělen na dvě části - věž a střechu. Tisk je možný bez podpěr. Slavín lookout tower adapted as a dice tower. The model is divided into two parts - the tower and the roof. Printing is…

Pobrania
207
Polubienia
50
Ocena
5
P
Printablese645824

Color coded Dice Tower Castle Stairs

This is a 4-color print of the spiral staircase. 1: PLA, Prusament Marble Gray 2: PLA, Protopasta Opaque Black 3: PLA, Polymaker PolyLite Brown 4: PLA, Prusament Pristine White The stairs are brown, the stair rail is brown, the stair…

Pobrania
200
Polubienia
44
Ocena
5
P
PrintablesYevgen Negvey

TempTower 220-265 / 180-225 with .3mf Easy to edit

M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo

Pobrania
195
Polubienia
2
Ocena
5
P
Printablessharkman

Paper Towel Holder

Simple paper towel holder with a honeycomb pattern. Includes universal screw holes for easy mounting and large roller handles that screw into the base to hold and support the roll.

Pobrania
193
Polubienia
68
Ocena
5
P
PrintablesJohn

Towel Clamp Hanger

A very strong towel clamp hanger. Print with 0.1mm layer height and 4 perimeters. Use PETG. After printing let the part cool down. Then twist the clamp in its final Position.

Pobrania
188
Polubienia
33
Ocena
5
P
PrintablesRizato

Dynamite and Detonator Dice Tower With Functional Plunger

Update May 3rd: Improved Freewheel and Pawls leading to better plunger action & longer coasting. Update May 2nd: Added new STL for Detonator box without text (Not pictured) Amp up your tabletop gameplay with this themed interactive dice…

Pobrania
188
Polubienia
147
Ocena
0