518 modeli
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
Hey team, I recently had a need to transport a ‘Size D’ Argon gas bottle and wanted to put together a dust cap for safe transport. The information for this threat was gathered from this website: https://www.hoseshop.net/blog/bsp-threads/…
25mm industrial bases, that fit my Miniature Painting Handle and Base Set Miniature Painting Handle and Base Set https://www.thingiverse.com/thing:6247736 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
multi-color printing - transparent/color/transparent. Final transparent layer bridges the colored inner layers, so both sides of the print are smooth. ** vícebarevný tisk - průhledný/barevný/průhledný. Finální průhledná vrstva přemosťuje…
second attempt at an art nouveau earring, litophane version ** druhý pokus o secesní náušnici, litophan verze
Compliment your rugged PC build with textured fan side clips. I used silk PLA to give a metalic effect. I have included models for 120mm and 140mm fans. Printing I used 0.15mm layers for a clean texture. 0.20mm would look similar and save…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Update 2025-07-26: Added a sturdier version featuring support beams for improved rigidity. This design is inspired by reinforcement techniques I used on a spool holder that previously flexed under load. Tip: Print both support beams…
No supports Maximum details Model in size 1, 0.75 a 0.5 scale.
This is for the ultra nerdy be warned… I vastly prefer this industrial Brady label maker over consumer options because of the different size of labels and there ridiculous adhesion and durability and color options. This insert neatly…
I had made this from actual pipe before and decided to try and see if I could do in a 3D print. This is a full sized lamp but prints on MK3S (you can print on a MINI as well just use wood or make the base smaller) Lamp size : 200mm x…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
Gothic City is the largest, most modular 3D printable terrain on the market. You can create almost anything you can imagine with Tilescape 2. Check out the pics and videos from the Kickstarter here and purchase all of the components in…
Changed features provided in images; Much better airflow - including larger ventilation holes, rounded airflow paths, and additional airflow paths Ethernet Port - I read reviews from the original model and added a larger adapter port for…
I needed to spread an evenly thin and wide layer of SikaFlex glue in a recent project. So I made myself a modular system for a variety of parametric nozzles. When you first open the project file in FreeCAD it looks a bit messy… So let's…
FULLY MOVEABLE KUKA KR10 INDUSTRIAL ROBOT Consists of 7 separate parts. A great thing to understand the movements of the robotic arm. Each part contains holes for the protrusions of the adjacent part. this design was made by Yokata, the…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Description: It's an AA and AAA battery organizer with an industrial design. It can be placed vertically or horizontally. AA and AAA batteries can be stacked using holders of the same size. License note: This file is provided as a free…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
Tested and printed without issues using Cura slicer. Hello everyone, I've prepared for you this model of the Czechoslovak heavy-duty truck Tatra T-138/T-148 S1 in 1/18 scale with working steering, suspension, dump bed, doors and bonnet.…
Was downscaled from N. The roof is an original design.
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Industrial design furniture made from 3/4 inch water pipes. With these connectors, different types of furniture can be built from commercially available water pipes and wooden boards. The 3/4 inch water pipes (26.3mm) are available in DIY…
Another industrial building
11 different floor tiles for an industrial terrain. Each tile is 52.4x2 millimeters in size. They're not very tall, so they print quite fast. They've been designed for an FDM printer, but even a resin one will do the job*. Be aware that…
Keep your workspace tidy with this fully Modular Stackable Drawer System . Designed with an industrial aesthetic, these drawers are perfect for storing screws, electronic components, hobby tools, or small parts. The clever interlocking…
A set of futuristic ground vehicles for a generic SciFi setting, at 6mm scale. This set is designed to match the SciFi Road set of parts I have uploaded. This set is intended to be compatible with the other 6mm SciFi terrain sets I have…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Throne & Ash trial pack is the perfect set for getting started with building SystemHEX castles. Throne & Ash is our ultimate 3D printable castle-building system, featuring fully modular, interlocking buildings that connect to walls…
Gothic City is the largest, most modular 3D printable terrain on the market. You can create almost anything you can imagine with Tilescape 2. Check out the pics and videos from the Kickstarter here and purchase all of the components in…
Vytvořil sem si tento model pro trialové ježdění. Tiskový materiál PLA rozvor 260mm použité nápravy axial vlastní spojovací linky převodovka axial kopie
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
OVERVIEW: One assembled shelf bracket includes: 6 3D printed parts 4 screws M5x16 (you can use M5x14 or M5x18) One part needs to be printed with support 3D models are in the correct position in relation to the bed, no need to rotate them…
A lovely industrial lamp for your living room. Print instructions Buse : 0.4 mm Précision : 0.15 Température de plateau : 50° Température d'extrusion de la buse : 210°
Looking to dive into the world of industrial automation? This Industrial Automation Conveyor Belt project is the perfect way to get hands-on experience! Created in collaboration with PhaseDock and showcased at ECEDHA 2025 , this project…
Another industrial/steampunk inspired retro light Shorter print / fewer parts Check my other Industrial/steampunk inspired lamp @ https://www.printables.com/model/164129 Printing details Nozzle .4 Resolution .2 (speed is fine) Supports…
Gothic City is the largest, most modular 3D printable terrain on the market. You can create almost anything you can imagine with Tilescape 2. Check out the pics and videos from the Kickstarter here and purchase all of the components in…
Note - I am pretty sure this is a remix but I lost my link. Please advise and I will update this post immediately. These are simple pots to hang on the lip of my 50-gallon bowfront and grow some terrestrial plants. Land plants are really…
E.T.: The Extra-Terrestrial Thank you for downloads, likes… Enjoy !
I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…
Finally, I managed to find a good concept for me to build my SciFi Industrial terrain line. Inspired by one of my oldest terrain designs, I finally was able to update this and present some really cool SciFi buildings you can use for your…
E.T. the Extra-Terrestrial Statue / Außerirdischer
This is an industrial handle that works best in pairs. It is designed to be mounted on a vertical surface. With the 45 degree angle, it gives your hands a natural position for carrying a heavy fixture. In my case I use it for Inspection…
Dual trial lens holder for standard optical trial lenses. Prints in two pieces that can be glued together. Update: Added 1pc model
A 1:48 Scale Garbage Dumpster
Features: Flexible buttons. Reset button indicated with inset circle: Strong enclosure for impacts and transport Snap-fitting lid No hardware for assembly (only for optional fan) Mounting provided for 30mm fan (ensure your fan isn't too…
Hello. I designed this hook to hold a motorcycle helmet, a backpack or any other not so light things. It has 4 attachment points for better grip to the wall. Designed using fusion 360. I like the look of steel structures, tried to make it…
I designed this for a Parkside wall-based vacuum sucker to be compatible with my Kärcher NT 70/3 Me Tc vacuum, that uses the thicker DN40 (40mm ID) standard instead of the DN35 found in household vacuum cleaners. I recommend deburring the…
Industrial locker hook. Printing with no supports, 0.6mm, "speed" mode Exists in simple and double version Quick and dirty version made with Tinkercad
Imagine a world where computation began with gears and steam-powered machinery. Enter Charles Babbage, a visionary mathematician and inventor who conceptualized the world's first mechanical computer, the Difference Engine No. 2, back in…
The Strider Collapsing Rod Stock From DI, A wonderful budget friendly printed alternative to metal & polymer collapsing rod stocks. Fully Open Source Files SBL1/Protean/Worker Collapsing Rod Stock Full Metal Rod Construction Quick Deploy…
With two designs, one whole for larger printers and another cut for printers with a bed of 180 or more.
A little project I modeled over spring break! It's an extremely small (271 mm) tank engine using almost entirely 3D printed parts! You just need to supply 15~19 suitable screws (I used #4 x 3/4" screws) & some glue! It is unpowered…
Do you feel a lack of tactile feedback when running over cards? Print a trolley! inspired by cover artwork. Printed in PLA with 0.2mm layer. No support is needed. 3 parts - need some gluing (or stack together in the slicer and try to…
Industrial Controller Holder - my take on an industrial design inspired holder mount for a controller. Easy to print and assemble, this controller holder will make a nice addition to your gaming setup! Features: Easy to print parts,…
My mother wanted cabinet knobs for her kitchen that had an industrial/steampunk sort of feel, but didn't find anything suitable at the normal retail stores. She asked me if I could print up some industrial-looking gears which could be…
Remix of the Framework Industrial Mainboard Case by @Magmabow. It removes the expansion card slots so that it's easier to plug directly into the USB ports on the main board. It also makes it so that it can be printed in two pieces on a…
This number plate covers the control cables and wiring between triple clamps on a Trials bike. Dimensions are based on my 2000 Sherco 2.9, but it may fit others. Printed in PLA, the picture here shows it bare, right off the printer. I…
Perfect for TV remotes, gaming controllers, pens, tools, or everyday accessories.
This is an accessory pack meant for dioramas. Intended for 1/12 scale, they can be scaled as needed. One of the floor grates comes with an integrated foot peg and can be used as a figure stand (results may vary depending on figure).
🖖 LCARS Industrial Replicator Panel — Utopia Planitia Fleet Yards Make it so. Turn your 3D printer into what it always secretly was: an Industrial Replicator, straight off the drafting tables of the Utopia Planitia Fleet Yards. This…
A pack of industrial based miniature bases for all your wargaming needs (D&D, 40K and all the other abbreviations). This pack contains multiple bases and I'll update it whenever I add new bases to this category. I'll be discontinuing the…
It needs supports only for the feets. The doors stay in place with some semispheres.
This is an industrial style handle for your drawers and cabinets. It prints in on the large face without any support. I reccomend unsing at least 3 perimeters and 30% infill for the reqired strength. I included a parametric F3D file, so…
After trying to find a second mount for the UMR-I (it is supposed to be mobile after all...), I decided to just print my own. I plan to use the UMR-I for my parents as a backup for their very bad cable internet. But they want to also use…
Industrial Phone Stand This is a rugged, industrial-inspired phone stand designed for durability and functionality. The design features a robust, mechanical aesthetic with reinforced ribs, mounting holes, and enough open clearance for the…
PRINT SETTINGS: Material: PETG recommended ABS/ASA for high temperature environments Recommended settings: - 5 walls - 45–55% gyroid infill - 0.24 layer height - Print on side for maximum strength Mounting: - Countersunk screw holes -…
Fits Whalen Industrial racks. 3/8" upper slot opening, 3.0" slot-slot spacing. Print recommendations: as this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50%+ infill wall overlap. Print on it's…
Print Settings Printer: Bambulab P1S Rafts: NO Supports: NO Resolution: Top-cover, Top-Pipe, Base-Pipe 0.2mm Resolution: screw, nut 0,8mm Infill:Top-cover, Top-Pipe, Base-Pipe 15% -20% Infill:screw, nut 50% 4 walls Filament : PLA
El “PLC” (Programmable Logic Controller, por sus siglas en inglés) es un dispositivo electrónico que se programa para realizar acciones de control automáticamente . Un PLC es un cerebro que activa componentes de maquinarias para ejecuten…
A sleek, minimalist "wave" pattern that feels both organic and futuristic.hollowed-out design provides a sense of lightness and transparency, making it a perfect centerpiece that doesn't overwhelm a space.
Cool industrial aesthetic for your desk, garage, or man cave
Adjust the shelf in Fusion360 and show off your prints with this modern bookshelf design. Default dimensions creates spaces sized 40mm Long x 30mm Wide x 27mm Tall.
Spaceship fuel....alien and astronaut drink...something. Made for #LMShow Print Drive 2022 but late No support is needed for the lid thanks to the 45 degree lip between the threads and the top. Threads are 90 degrees, rounded, and thicc…
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera. It is based on my own manual measurements. I am hopeful that someone will find it useful for creating their project. DISCLAIMERS: The…
Modern robotic arm sculpture inspired by industrial automation and precision engineering.
!!! This model is currently not updated anymore due to limited time. Tolerances might not be perfect. Some featured might be added some might be removed!!! I designed this Watch Stand compatible with the Apple Watch chanrging puck. It's a…
terrestrial dragon, breathing fire
A rotary pipe valve time switch (yes i could have made is like an actual valve but longer and much harder to print out). print the 3 parts non printed part rotary switch - amazon, ali express etc heat shrink tubing tools knife and or…
I saw wiky1982's design and rather liked it, but it didn't fit the current standard mini lights we have in the US, which often have a safety latch on the side. So I redesigned it from scratch with a couple changes. Changes from the…
Insert for the Trial by Trolley card game box to organize the 3 different cards sets and tokens. Token box has a bottom to prevent cards from slipping under the cards. My son's first design :) Print instructions Printed 0.20 layer height…
Love the design but would not fit my S23 Ultra. Quick remix and it's good to go!
Industrial pen holder on your desk www.martintulak.sk @tulak3d
Printed without support with cylindrical pins (3mm diameter, 14mm length) you can connect multiple of these units together. CAD Model…
Your download will include all the files necessary to print the prop shown above. The piece is assembled using 8 M6 bolts and 8 m6 lock nuts, also a dab of glue or contact cement for small details like the wire conduits or fake bolts.…
This contraption is the result of a bored person with access to 3D designing tools. I, personally, like it, but tastes may vary. Comes in 2 versions: with and without a “reinforcement” beam, and should be printable without supports.
I printed this for a demonstration of the plastic extrusion process. Hope you can find it useful too!
Scaled from real structure found on the internet to 1:220 (single fan cooling tower). Added some pipes and side stairs from photos on the internet. The provided gcode is added for print time estimation. It printed very good apart from the…
Increase grip comfort and style. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print settings: PLA or…
Industrial Hercules DJ Knob Set Set of 3 Knobs for the Hercules DJ Board.
The printable connection pegs for this part can be downloaded here and the single tile version can be found here .
![Charles Babbage's Difference Engine: TrialPiece [Work In Process]](https://media.printables.com/media/prints/660789/images/5205811_0cb2a7a9-743b-4260-87ee-4041f1bf48b9_8471e325-4a9f-4442-ad31-81a2a442fa4a/trail_piece.jpg)
![[Compact] Framework Industrial Mainboard Case](https://media.printables.com/media/prints/6cd80c56-b03f-4332-a792-97700c120b5e/images/10655890_16338e5a-1fab-4623-8bf4-d74735e77fbb_ec5db624-2b2f-46c2-adff-4f47f07da8ff/compact-industrial-case.png)
