247 modeli
Funny Sign for bathroom of small business. Printed with two PLA Filaments. Color change at Layer change can be performed with almost any printer.
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
0.2 mm layer height recommended PLA 3 color changes, total of 4 colors recommended No MMU needed
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
A tool for turning the film sensitivity change ring for the Konica C35AF. You can easily change the film sensitivity even if the ring is stuck.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
The Boomerang V5 – Light and Fast Returning is the latest refinement in an ongoing boomerang design series, tuned for maximum distance and a quick, reliable return. Weighing in at under 10 grams , this three-bladed boomerang achieves an…
MK3s+. 0,4 nozzle 0.3 layer. Holder 60% and plate 30% infill. PETG.
This is a fast returning Simple design boomerang, that is durable and should be thrown at 35° to 45° Printing: PLA or PETG
Each file creates a different angle template 10 for 36°; 12 for 30°; 16 for 22.5%; 20 for 18°; 24 for 15° Use your favorite print settings. Primary use is to set angle arms on a wedgie sled used to saw segmented for segmented woodturning.
The goal of this project was to make a simple 3D printable turn table for 3D scanning of small objects. The model is hand-driven, by turning a knob that drives a worm drive with an attached scanning table. For 3D scanning using…
The originality of this piece is that the heart turns freely in the body of the cat. Print instructions Print Settings 1 x LucycatBody : Layer:0.20mm Raft:no Support:no Infill:15% 1 x LucycatHeart : Layer:0.20mm Raft:no Support:no…
3D Printed Turning Table. Top Plate: Ø140mm. For this project you need 29 countersunk head Screw M4x16, and 14 Screw M3x8 and 9 Bearing SKF 608-2RSH (Ø22 x Ø8 x 7mm) (The same used in most of the skateboard). The 4 Hole on the top plate…
I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…
The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…
You might need superglue or other strong glue that works on your filament type.
Brio 180 Degrees Turning Category: Mechanical Toys
easy fit with knob
These jigs can be used to set a miter saw or a wedgie sled to the exact degree/angle for cutting segments of wood that then can be glued up to make rings for gluing a bowl blank that can be turned on a lathe. Currently included in the…
USB-powered sentry with space for a 28byj-stepper, 30mm-ish speaker, and electronics. the lid of the magazine can be removed. the stepper needs to have the screw hole tabs trimmed down to fit. demonstration:…
https://tormek.com/en/products/accessories/tts-100-turning-tool-setter Use setter for distance of tool bar and protrusion of tool from model. I use with: https://www.printables.com/model/1329063-svd-186r-tormek-sharpening-guide
I recently saw some neat turned pens with herring bone patterns. Rather than glue individual pieces of plastic as the separators that help the colors stand off, I figured I would just 3D print the pattern so it can also serve as an…
I designed Malmö's landmark in Fusion 360 and it was a lot of fun. Especially the 90° turn of the building. The windows not so much :) I scaled the print to 180% because of the thin beams at the pointy side of the building and cut in in…
PETG, high infill, 0,3mm bottom layers and 0,15 mm threaded layers.
Needed to get my new lathe tools off the countertop so they wouldn't bang into each other. Figured I had a huge peg wall in my shop so I used MGX 's peg board program…. https://www.prusaprinters.org/prints/34992-pegstr-pegboard-wizard…
Put your head straight! Spin the segments to form a bust. CAN YOU GUESS OF WHO THE BUST IS? Each segment is numbered for easy assembly. The numbers are hollowed into the TOP solid. The stick is now printed horizontally - in direction of…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 = Have You…
[edit @ Aug 5th 2025] 🔥 V3 is here! This version should finally address the weakest point with an added rim around the piece (or “lug,” if you prefer) that used to break frequently - the one the cable passes through. Since my last PETG…
Replacement piece for the turning plate of the Combi C105 microwave oven. Print instructions Category: Kitchen & Dining Summary Replacement piece for the turning plate of the Combi C105 microwave oven. It might fit yours, the outer shaft…
I designed the mountable holder to fit the Easy Wood Tools mid size turning tools, and the organizer bins are sized to hold 2" micro-mesh sanding pads, or 2" round sanding discs.
This is inspired by woodturning techniques and a variation of this little thing: https://www.prusaprinters.org/prints/103978-woodturning-bowl-02 If you like this little thing, you might want to check those ones, too:…
I love this movie so much! So i made a cute little figure ^^
This is a bushing holder for pen turning bushings. They slide onto the stem of the bushing holder, but don't slide back off. Each holder has a 3" x 5/8" tab for a label (good for the Avery 6870 2.25"x0.75" labels). The bushing holders…
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
These bushings (range of sizes) enable grasping the rounded end or sphere of a spindle. Please see my video for an application on www.AsWoodTurns.com From one end, the bushing is hollowed to accept a sphere of the given size. From the…
Use the jigs to mount wood blanks in a lathe chuck. One jig centers the blank, the other jigs allow for off-center turning. The blanks should be 1.5" to 1.6" diameter made with a 1.75" hole saw, and are used to create wooden pendants.
I originally did this design in 2014: Now I know why Vader was so angry. He saw his electric bill. I made this as a reminder that following in Vader's footsteps is not only fun, but can save you some cash as well. Switch to Vader to go to…
First, I made the two top pieces: “Top Half A & Top Half B with 3-”Center Dowels" then glued them all together. I used “Glazing & Spot Putty” I bought from any auto parts store and hand spread it over the top but be careful not to get any…
I wanted to have a desk light I could easily turn around and I didn't fancy buying one. I'm a maker, by Jove, I make things! In his 3d printer enclosure video , Jonathan from the Next Layer mentioned these cheap LED lights on Ali Express,…
This remix of the Hubelino Elevator offers users several options for upgrading and customizing the original model: Rotary Knob : A newly designed rotary knob has been created to replace the motor in the original model. This allows for…
Since i have a new lathe i try to create also pens. I found this https://cults3d.com/en/3d-model/various/reusable-mold-for-pen-turning-blanks-makerneer model online. This is a good model, but it was too big for me so i designed a smaller…
What's the difference between a basket and a bowl? Perhaps just some holes ;-) This is a variation of Woodturning Bowl 07. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing,…
A returning boomerang requires no special settings and has very low filament costs and a short print time. Has Been Tested If you like this model, consider tipping to support Fonn Prints and help us with future models and more!
I recently started getting into pen turning and needed a mold to make my own blanks. I initially intended to make a typical silicone mold but screwed that up. Being impatient, I decided to see if a TPU mold would work. Good news, it does!…
in a few days, I will upload the video for this project. This Is a tool designed to help you turn wooden rings on a commonly sold mini-lathe. be careful not to overtighten the chuck otherwise, your ring will be likely to break as you turn…
Locksport is a great hobby, and a challenging one. Often it is needed to customise your tools to open just that lock you couldn't open with your current toolbox. This is a disc detainer - disc rotation tool. Before opening your disc…
This is an 80mm faceplate intended to be used for finishing turned work on a lathe. It is NOT for use when turning. It has a 1" X 8 TPI thread with 4 countersunk fixing holes on a 60mm diameter. I often have a number of pieces on the go…
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
Parametric Ball Turning Tool for Lathe I have been able to machine (mostly half) spheres in both aluminum and steel with this tool Required printed (or machined) parts: BallTurningTool_ToolBase.stl (1x)…
Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third…
These caps are to keep my wood turning tools sharp between use. Wood turning tools are not dimensionally accurate as they don't need to be and as you sharpen them the size can change do to the steel not being a consistent size. For this…
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
I got tired of spending so much money on those nylon finishing bushings, so I made my own. I printed these at 100% infil in PETG no supports with the large base on the print bed.
Recaro Seat Adjustment Turning Knob Category: Automotive
You can use the jig like you would a Oneway Vari-grind jig, or use it with a holder for bar guided systems like the Sorby ProEdge or Tormek and similar wet sharpeners. UPDATE : The main part of the jig now comes in 3 sizes : 16mm and 19mm…
Turning table for 3D scanner. Bearing large diameter 47 mm, small diameter 20 mm, and width 14 mm. There are 4 pockets for 10x3mm magnets in the base. When printing, make a pause at a height of 3.6 mm to insert the magnets.
This is the bowl version of Woodturning Vase 05 and I think it really works great as a bowl. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this…
This is a discsander faceplate for woodturning lathes. Put some self-adhesive velcro on it, punchout the holes (or don't), screw it on your favorit lathe, put some sanding paper on it and start sanding! I created and tested the M18x2.5,…
A rotating plate to simplify airbrush work. The model is placed on the plate and can be easily rotated thanks to the ball bearing. A ball bearing (Typ 6001-2RS) with the following dimensions is required for assembly: Outer diameter: 28mm…
You want straight walls and the beautiful cube pattern? Turn the axis of rotation by 90° and you're good to go. But you will lose the pattern on the bottom of the vase. Or is it a bowl or a trash can? The base pattern is a simple hexagon…
I loved the spool holder this is a remix of... but I found it a little bit tedious winding it in... so I added a handle... In the image the left part is the original, the right one is the remix... I used 15% infill for most of the part…
These turning tools were designed to use at a potter's wheel for forming and trimming purposes. 100% infill is recommended. Print with the handle flat against the print bed and tip pointing up.
I wanted to store my chuck jaws on the wall and the commercially available holders seemed over priced for what they are so I decided to make some 3D printed ones. Due to the size of the print bed I had to make it in two halves, so to…
No specific print settings required. For contrasting text color, change filament in top layers. Appropriate for VicMarc VM-120 chuck used for woodturning. Please see my video at https://www.aswoodturns.com/2022/08/soft-jaws/
Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…
Easy way to align your nocks to the right position for maximum accuracy. If you hit your own arrows as a consequence, you also might need a suiting nock extractor at some point. Also check out the Ultimate Archery Companion . Printing is…
Another variation of the Woodturning Bowl 04. You might call this one the sleeper bowl. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and…
The original design's nob is not very easy to turn, especially to smaller hands(my son). So I have designed this little handle to attach to the nob which makes turning much easier!
Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…
Inspired by woodworking techniques I tried a variation of a simple stacking pattern. If you like this one, you might want to check this too: Everything is based on this simple pattern: If you like this little thing, you might want to…
I designed this for vending events I go to and was told I should post the files so I decided to go ahead and do that… I printed this on my Sovol SV06+ using what I had left of a few different spools.This is fully stack able and the sky is…
Turning Keys for Car Wars in 1X and 3X scale including the additional tick marks needed for Bootlegger Reverse and T-Stop maneuvers. Print each half and glue them together. These are quite thin so I am unsure about printing them without a…
Put anything on it you want to turn around. Printing I printed with PLA+, layer height 0.2 mm, on a smooth build plate. Assembly Place the Separator on top of the Base Plate. Place eight bearing balls in the groove of the Base Plate .,…
This chassis was designed by Cornell University students with the following features: Zero-point turning radius Caster/omni-wheel dual mount Half-hex rails optimized for 3D printing and future-proof for a potential injection molded…
Updated 30Apr23 - See below… This is a variety of push-on protectors for woodturning chisels. If, like me, you tote your woodturning tools to various venues in a toolbox, where they can rattle around and crash into each other and the end…
Same base pattern as the vase before, just changed some dimensions and the shape of the vase. I like the left one a bit more but you'll need support to print this. The right one is optimized for printing without support. This might be a…
Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…
I used LowRob's idea and redesigned it more to my liking - but the exact same concept. I recommend a height range modifier from the build surface up to 35mm and make it a “Fuzzy Skin” for easier grip. You should be able to print it with…
Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…
I couldn't find anything easy enough to turn my quail eggs while they were in the incubator so I made a solution.
This model requires support material, and it is important that the undersides of the floating areas are clean, so I highly recommend using a dedicated support material for the interfaces. OpenSCAD file is included for the brave who want…
Still playing with woodturning techniques. Same pattern as for the https://www.prusaprinters.org/prints/102766-woodturning-bowl-01 , but a different result based on the different shape. If you like this little thing, you might want to…
I needed to sand the inside of a narrow but deep woodturned part (for a “Weizenholz”). It is very dangerous to sand the inside by hand, and you can't reach the bottom anyways. This is a adapter for the Crown Revolution tool (I have the…
Welcome to the turning drag chain gantry connection tower. It is the best way to give the cable freedom in turning by a moving toolhead. So check out the pictures and if you like it → build it!
Wheel of Fortune - Vanna White - Turning Letters Since 1982 3D printable model.
Still playing with woodturning patterns. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this too:…
Turnable tail wheel for Heewing T2. The original landinggear is good but I missed a turnable tail wheel as well as a better way to quickly attach and detach the landinggear. Also mount knobs for quick assembly of landing gear without…
Hanger for turning chisels in two sizes
A simple knob I designed for a table fan. Print it up side down.
Wall mount for turning inserts boxes with max size of 42mm x 12 mm > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid.
Replacement handle for a Ryobo table saw, or other handles mounted to shafts. 8.75mm shaft protrudes from the table saw, and this drives a screw to wind up the height of the blade. This should suit most applications with a similar shaft…
Still playing with woodturning patterns. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and than patterned along the dotted lines. If you like…
This is based on the internals of Woodturning Vase 07 and prints completely without support structures. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into…
This is a set of small targets to be shot at with airsoft guns or really any other gun replica. I have designed only a few shapes thus far, but I hope to add more soon! The base is separated from the rest of the target, so should the…
Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…
this is a model for a cap for M6 hex screws no supports needed 0.2 layer height
This is a modified wall section of the K1 Max riser made by Fred Boisselier to include the model number “Transmogrifier 3000” familiar from Calvin and Hobbes comics. Why 3000? Because it's better than 2000! To stay true to the original…
Variation of Woodturning Bowl 04. The shape is more roundish but will need support for printing. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single…
I designed two different attachments for the live center for turning balls. The attachment simply attaches to the standard 60° center to clamp the workpiece without damaging it. Printed from TPU with 20% infill. Update: Added Modell…
Turning vane for RB14 similar to 2018 Spanish GP. Pictures are after some rough post processing. You must take the barge board off prior to removing the turning vanes to have the right layering on the aero bits. if you hate this you can…
Robust live centers (and others) have ¾"-10 TPI threads for accessories. This adapter lets you put a 1.25"-8 TPI chuck onto this live center. This can be useful for centering or for reverse mounting on some clean-up operations when you…
