4106 modeli
Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Blood Type Keychain with NFC Tag (v2) This is a remix of my blood type keychain (see here ). The design has been completely reworked and is now in the shape of a blood drop . The keychain has a size of about 30 mm x 42 mm x 3.6 mm. The…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
UPDATED to V2 V2 now has a hidden mounting plate for a slim design and easy installation. Make sure to mount the plate with the hole named “up” in the up position. Use at least 4 perimeters on the mounting plate due to stress on this…
Wydruk około 11,54 €–14,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you carry your mobile phone in your pocket, you've most likely had lint accumulate in the USB-C port. Plugging your phone in for charging compacts this lint at the bottom of the port, which can lead to unreliable charger connections.…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
An OEM profile keycap that clearly marks an exit.** Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650 **Not just for Semiologists! Print instructions 80% infill 4 shells…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Simple Idea but big help! SINCE 2021 → I'm the original Inventor of this idea! Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG. Infill doesn't matter. Layer high 0.1. *Don't push to…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print holds six bottles of beer in your fridge and prevents them from rolling around. The model can be used sideways or upright depending on your needs. Perfect if you need to keep a six pack of bottles chilled but with the least…
Wydruk około 8,04 €–9,82 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Blood Type Keychain with NFC Tag This is a remix of the keychain by Max Siebenschläfer . I didn't use any of his files, but I still want to mark this as a remix. I think his idea is great. Compared to the keychains by Max, these keychains…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Wydruk około 6,62 €–8,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
Modifikace zakladače proužků pro šití roušek, kterou tiskneme v Industra Labs. Určeno pro pruh látky 40mm. Manuálně složený Gcode určen pro MK3S, tiskne postupně 9 vase tisků na nekolizních místech podložky. Počítá to se standartní…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model of knife based on description on https://www.knifeplanet.net/are-otf-knives-useful and https://www.youtube.com/watch?v=RtuXzDqRV For assembling is needed 4 screws M2-10 rubber wire
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
I was looking for a tight-fitting cover for my patio USB power outlets. After printing a few and finding none that fit tight and had a handle you could easily grip, I did my own. Two gcodes are offered here; one in PLA on the M3 and…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena jednego wariantu
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After printing my previous Infill Type test, I wanted to create a version with the Names of the options. I also wanted to have each type individually. Hope you like the files. Use the 3mf to get it all setup in PrusaSlicer with the…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu
By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
Wydruk około 5,09 €–6,22 € nettoWstępna wycena jednego wariantu
A simple coffee filter holder. Holds more than 100 Kalita wave filters. Print Settings Printer: Prusa i3 MK3S+ Rafts: Doesn't Matter Supports: No Infill: 15～20% Layer Height: 0.20～0.30mm Use the "Variable Layer Height" function if you…
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
Agent P aka -Perry the Platypus from Phineas and Ferb
Wydruk około 12,92 €–15,79 € nettoWstępna wycena jednego wariantu
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
This cable support is designed to prevent damage to cables inside an audio rack by keeping them securely in place during transport and handling. By minimizing movement, it helps maintain signal integrity and extends the lifespan of your…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
This is a remix of OG model, which allows to attach tape at the type C end, so the protector doesn't come off when pulling the cable. Use papertape or any coloured tape of your choice to colour code your cable ends.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
It would be nice if you post your make. Thank you
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
My generic step-down transformer from 220v to 110v has a front output that is just taped off. I wanted a more reselient and permanent solution - so this is it. You can, like I did, put a dollop of two-part epoxy glue to the middle of the…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
You need supports
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have known the saying for a long time and find it very funny. As there is a suitable contest open, I thought I would make a sign. Insert a color change at a height of 1.6mm.
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
Wall Art silhouette of the Honda Civic Type R FK8. Adjustable size. I accept model suggestions or ideas you have.
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little cover for the amazing Customizable & stackable beer crate for all types of batteries by CAD-Guy. I used the material reduced bottom from Antimaterie but increased the height to get more grip inside the crate. I used the lid to…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pentax K body cap with/without the old Asahi Optical Co logotype. No need to use support when printing. Regarding the pictures of the body cap, I have used sandpaper to make a more matte surface. NOTE: Harrow Technical UK writes “We do…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5/8" big thread a 3/4" small thread for classic lever tap. I print 100% infill from PETG In 3mf file is set 30% and 3 perimeters which should be sufficient strength and edited model for print without supports.
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An elegant and functional hair stick designed for creating both quick and intricate hairstyles. The model features a minimalistic and elegant design . Its lightweight construction allows for easy and secure hair fastening without causing…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
This gauge can be used to measure standard pipe threads used all over the world (except US). Parallel (straight) threads, British Standard Pipe Parallel thread ( BSPP ; originally also known as British Standard Pipe Fitting thread / BSPF…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a guide for tapping an M5 thread into the end of I-type 2020 aluminum extrusions. These are the type with 5mm slot width. The model was inspired by existing designs like this one:…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A shipping container that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. If you like this model check out this collection of my other toy train models.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print without support;
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a toilet paper spindle in case yours broke. No Springs Needed so Its fully 3D Printable Best Printed with 0.16mm layer height or smaller When installing be sure “Spindle Female.stl” is on the right side to avoid unscrewing while…
Wydruk około 3,88 €–4,75 € nettoWstępna wycena jednego wariantu
I've created this cupholder because in my 2017 Audi S5 the RedBull cans and other stuff wasn't fix in the standard one. Also I've added a storage for my IQOS Iluma One and space for 2 cigarettes which fit in and are prepared, so you don't…
Wydruk około 5,05 €–6,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Knob for Potentiometer 3296 print with brim and disable detect thin layers.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.
Wydruk około 6,60 €–8,07 € nettoWstępna wycena jednego wariantu
just construction beam i made for my 3D house cutout project use it freely RECOMENDATION USE BRIM !
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Combat Carrier Prototype 99A as inspired by my novel “Mongruxx - Until we cross this bridge again" Book 4. A semi-sentient broken down combat bot, Weaponeer 259 builds. His cavalcade included seven of these vehicles. In the dark,…
Wydruk około 4,69 €–5,74 € nettoWstępna wycena jednego wariantu
Model Transport Box for Polaroid i-Type and 600 film photos, to get your instant photos safely home, with eight slots and lid. There is one model with the label "polaroid i-Type 600" and one without the label in the files. Dimensions The…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This is a fat platypus I made while learning how to sculpt in Blender! There's no real reason to print it other than you want a fat platypus. Pretty simple. I used tree supports and they came away pretty cleanly, even at the smaller scale…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
New version of the Screwable round box with plenty of space for antenna-/ speaker cables and plugs. You can attach the box to the ceiling or a wall with up to 4 screws. The cover box consists of a lower removable part and a cover plate.…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Japanese logographic symbol for "Love" as a typographic sculpture.
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Screwable round box with plenty of space for antenna / speaker cables or connection plugs. You can attach the box to the ceiling or a wall with up to 4 screws. The cover box consists of a lower removable part and a cover plate. This…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you draw a circle on an x/y plot touching both axes, the distance from the origin to the centre of the circle is R+L, with L being the distance between the origin and the nearest point on the circle, and R is the radius. With a bit of…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
A remix of a butterfly knife model but with the blade removed and replaced with a simple rectangle to prevent cuts and allows you to flip it around safely
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model The model is a photo frame and photo storage box that reuses parts of the Polaroid i-Type, 600 or SX-70 film cartridge. The model consists of two parts and an optional stand. The frame can be set up directly, hung on the wall or…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
These custom nut holders are specifically designed to simplify the process of securing connectors onto a D-Type arc mounting plate. Each holder ensures the nut remains firmly in place, making assembly and maintenance quick and convenient.…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This is an adapter for to connect a vacuum cleaner to an Einhell TC-RS 38 E disk-type sander. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% or more Filament: PLA or PETG Notes: Print with 0.4 nozzle and 0.45mm line…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
3D model of the Forza company logo. Print time: ~1h Used filament: PLA Used filament length: 1.62m Weight = 5g
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Polaroid SX-70, 600 and i-Type frame. You can find all my models here , thank you who will appreciate with a download or with a like
Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu
Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
These three panel covers are designed to neatly protect and secure unused mounting openings. Each cover is tailored to different fastening preferences: 1. Screw-Mounted Cover • Two mounting holes for M3 screws and nuts (buy DIN 7991TX ) •…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…
Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu
This is a simple earbud holder to make your earbuds look nicer on your desk. It will give them a cleaner look, than just throwed down. It will take up very little space. This print does NOT need supports.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Use this adapter to mount your Dremel type 395 rotary tool to an AXA tool holder for fitment onto an AXA tool post. The design does not require additional hardware, but rather clamps the dremel as the tool holder screws are tightened. I…
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
Storage for 8 pots of yogurt
Wydruk około 9,46 €–11,56 € nettoWstępna wycena jednego wariantu
This 3D model, designed with the visual assistance of DALL-E, is a colosseum-style football stadium that showcases contemporary architecture while attempting to simulate an architectural studio's prototyping workflow. The primary goal of…
Wydruk około 32,85 €–40,14 € nettoWstępna wycena jednego wariantu
1936 became the year of Auto Union and its young Bernd Rosemeyer. He became the new star in the European racing scene. It was the clash of the titans, Mercedes-Benz VS Auto Union. The GP of Germany at the 26st of July was just another…
Wydruk około 8,22 €–10,05 € nettoWstępna wycena jednego wariantu
I really liked the simplicity of this model but I need it to be on my keychain or I will for get to take it with me when I go places. Thanks to @Bbrinck_1460947 for the initial design if you just want the box and not the additions for a…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A Classic of Engineering Decorative Art Chassis-No. 57.591 (R. B. Pope) For quite some time, experts all agree that the Bugatti 57 SC Atlantic Coupé belongs in the most beautiful cars that were ever built. Its streamlined body is a…
Wydruk około 6,11 €–7,47 € nettoWstępna wycena jednego wariantu
Store your charging cable safely on the wall. Just needs two screws for mounting.
Wydruk około 6,81 €–8,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0,20 quality 20% infill
Wydruk około 9,13 €–11,16 € nettoWstępna wycena jednego wariantu
nothing really big about to say…. There is one desing error in the hollow inner structure - I have to fix for the final version. Print it in the material you like, use the layerh height & infill density you like. For the attached STL…
Wydruk około 5,77 €–7,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When Talbot presented the Coupé for the first time during the Paris Motor Show in 1937, the visitors were impressed immediately.This very quickly gave rise to the terms “goutte d’eau” (drop of water) and “teardrop coupé”, which were never…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena jednego wariantu
Stores type 100 prints flat for drying. Can store two prints back to back in each slot for a total of 10 shots.
Wydruk około 6,41 €–7,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This HyperCard Prototype is a futuristic concept vehicle brought to life using AI-generated design. Featuring aggressive aerodynamics, bold curves, and sleek detailing, this model captures the essence of next-generation automotive…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
Two variants of "mounts" for 5x7cm paper-epoxy prototype PCBs (If you use them, you know what I mean.). One version uses M3 hardware to fix the board. The other uses glue, if anything at all.
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Žáci si za pomocí tohoto modelu sestrojí trajektorie hmotného bodu při posuvném, rotačním a složeném pohybu.
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
UPDATE: New Aurapol/Spectrum Spool Design Supported! This 3D-printed ring functions as a removable platform for NFC tag stickers used in filament spool tracking and management systems. Easy transfer to a new spool thanks to the slot for…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you craving a twist in your usual chess games? Add a touch of linguistic charm to your game nights with this latest creation, CheckMate Typography Chess! Now with built-in magnets in the chess pieces and board, every move you make…
Wydruk około 4,89 €–5,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The fan holder is meant for attaching a PC fan to a heating radiator to increase efficiency of the radiator by active ventilation. The bracket makes use of three 10mm x 2mm neodymium magnets to attach a 90mm PC-fan to a type33 radiator.…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
The filament clip is designed in two parts: 1. The body consists of a supporting part with a filament clip and a sliding mechanism 2. Insert on which there is an abbreviation for filament. The filament insert is designed so that it can be…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
(English below) Modell eines Audi Cabriolet (Typ89, Baujahr 1991-2000), entweder in der Ausführung "Serie" (seriennaher Zustand) oder “Tuned” (mit Tieferlegung und Rieger RS2-Frontschürze). Es eignet sich ideal als Schlüsselanhänger für…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses Podest wurde als Erweiterung für das großartige Simson S51-Modell von Mart80 entworfen. Es verleiht dem Druck das gewisse Extra und macht ihn zum echten Hingucker auf dem Schreibtisch oder Regal. Ich habe die Simson in 200%…
Wydruk około 5,21 €–6,36 € nettoWstępna wycena jednego wariantu
This is a prototype enclosure for lumbar puncture simulator. It uses 3D printed lumber spine anatomical model from ALiEM. It is designed as an alternative simulator enclosure when the silicon for molding is not available. Manufacturing…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena jednego wariantu
What is it? Example of a standard duplex receptacle: https://www.homedepot.com/p/329118072 Example of a recessed duplex receptacle: https://www.homedepot.com/p/202066691 Print instructions: Orient flat side UP hollow RECTANGLE on TOP…
Wydruk około 19,28 €–23,56 € nettoWstępna wycena jednego wariantu
Quick Wire / cable Connector Terminal Block Spring Connector wire holder (Multiple types) with space for small labels. I needed a holder to hold multiple types of these different type of wire connectors. The fit is tight because I don't…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Battery holder for MacAllister MBAT18-Li. Older type then Solo. Must print like in picture.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a smaller version of my small primer anvil filter i used to prototype out the size of the holes.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
This design of a 3D Maze is originally based on an article from Scientific American from September 1988. There this is called “a van Deventer Maze”, or “Oskar's Cube”. You can also find more info about Oskar van Deventer and his puzzles…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Saia Burgess make small actuators that are commonly fitted to Mercedes (and others) to automate climate control in their cars. These connectors are designed to be fitted swiftly and so they do not vibrate free. However this means you have…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of https://www.printables.com/model/27555-usb-type-c-port-cover I gave an arm to the original USB type C plug to serve as a kickstand with a keyring hole. Printed it in PETG with 100% infill and some minimal support. I…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand with a Hole 35mm for X-Mitter transmitter / typ HA-HX2
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
This adapter keeps the USB type A Dongle from LedLenser standing steady on the table, turning it into a convenient charging dock. Confirmed working with the P5R Core and P7R Core , but should work with diameters up to 30mm. Let me know if…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
![Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]](https://media.printables.com/media/prints/549902/images/4418204_cc329943-2227-45f1-807c-9f0d489720d7/pxl_20230810_151038751mp.jpg)
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
