Wyniki wyszukiwania: uck

LUCKY 13 Printable Jointed Figure

Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…

Print in Place Modular Truck - Base

This Print-in-Place truck is something more than it seems to be. The connectors on the back can hold one of many attachments, such as a Dump Bucket or Wood Transport extension with a crane, all of which can be downloaded from here:…

Floating Rubber Duck

I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…

Suzuki Carry Kei Truck

Print Details Full truck with cargo: 239g Truck only: 167g Dimensions: 3.25x 5.75 when printed at 100% v2 (6/9/23) Hello! I went back and cleaned up the model a little bit. Here's what's new: Uploaded all of the individual parts The…

AWP for Lucky 13 / Mini 13 / Dummy 13

AWP for Lucky 13 . Scale should be in line with this AK-47 for Lucky 13 0.4mm Nozzle can work, but the Bolt and Bipod will be very fragile, especially when having to remove the support material. I managed to keep the Bipod on mine…

Rabbit Ears Head for LUCKY 13

This head part with rabbit ears like Briareos, Chappie. Print settings: Filament: PETG, PLA Layer height: 0.15mm Supports: no Perimeters: 2 My other head parts: Dummy 13 Head Collection

UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale (RC CAR / RC TRUCK)

18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…

Mini Duck Buddy

Meet Mini Duck Buddy , the tiniest quacker in town! 🦆✨ ✅ Super Small & Adorable – A tiny duck buddy full of charm ✅ Perfect for Desks, Shelves & Collectibles – Always there to brighten your day ✅ Lightweight & Quick Print – Weighs just…

M134 minigun for LUCKY 13 / Dummy 13

Is your “13” tired of all these weak SMGs and AKs? Try the famous minigun! Its six rotating barrels produce an uninterrupted stream of hot lead, obliterating most troubles out of its way. (Do you need something even bigger? Try out the…

Lucky Elephant

Material: Spectrum - Forest Green Pla Layerheight : 0.15mm Support: Yes Oganic(Automatic or Custom) Seam painting: Yes (on the back of the model)

Haul Truck 40mm (DumpTruck)

A tiny haul truck commonly used in open pit mining. Movable wheels and bed, designed to be printed all together. UPDATE: I would suggest printing this model at 2x scale. The fine details print much better and so far my son hasn't broken…

Lucky Stormtrooper

Come to the dark side! Minimal Stormtrooper skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Vader model here: https://www.printables.com/model/172706-lucky-vader UPDATE: Get C-3PO here:…

Mercedes UNIMOG U5023 Cabin / Body (RC CAR / RC TRUCK) 1/10 scale

November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…

Fortnite V-Bucks - 3 colors - NO MMU - NO AMS

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Hockey Puck

I could not find a standard-sized hockey puck so I made one myself. Infill could be adjusted based on your age and the use of the puck. Print Settings Infill: 100 Supports: None Layer Height: 0.20 Material: Any

Duck Headphone Hanger

Made this for my sis to hang her headphones. A lot of hangers are great and waste less filament, but I wanted to make her something special. Holds my big MDR-Z7s no problem, you could scale down if you have smaller cans. You can fix it to…

Buck / Deer

8 point Buck. Added buck.tl.3mf and gcode 12/5/2023 (thicker legs less prone to breaking.) removed old files.

LUCKY 13 / MINI 13 Flat Pack Accessory Box

This remix of my original Flat Pack Mini Box is customizable within PrusaSlicer and has the following features: Stores 9 Lucky 13 hands in sockets UPDATE: alternate version for 9 Mini 13 hands on ball posts Stores two original Lucky 13…

LUCKY 13 - Female Skin

After all this FUN of printing & assembly of the LUCKY 13 action figure - it just felt right to make him a couple (although got couple of “what with his partner?” from my wife) So here it is - A LUCKY 13 FEMALE SKIN - remixed from…

ruck · container

ruck · container minimal screw-lid container, designed for function and form dimensions in mm: container ~ x: 85 · y: 85 · z: 105 lid ~ x: 85 · y: 85 · z: 13 important · make sure that: your filament is dry and calibrated so that it deals…

Lucky 13 AK-47

Made the AK-47 using the grip from the pistol. Print at 0.05mm layer height and use supports.

Brass knuckles (classic)

Tesla CyberTruck (print in place)

Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)

daffy duck from thingivers

daffy duck looney toons

Duck

Duck

Lucky 13/Mini 13 Sunglasses

Just some cool sunglasses for Lucky 13 and Mini 13. UPDATE: The Lucky13 version no longer needs to be scaled down to 95%. I've updated the model to the correct size to provide a snug fit. Added a Mini13 version.

Cat Tail for Dummy 13 / Lucky 13

A Cat tail for your Dummy ! Since i didnt find a tail and wanted to make my dummy furry like i decided to make one! Its the simpliest design and still movable as the whole Dummy! - No supports needed! I Only recmomend to print on raft if…

Lucky Vader

Come to the dark side! Minimal Darth Vader skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Stormtrooper model here: https://www.printables.com/model/199583-lucky-stormtrooper UPDATE: Get C-3PO…

Lucky D20 dice

With this die you will always score 20 :)

Off-Road Semi Truck

Off-Road Semi Truck Based on Fiat 65PC truck (1975) The truck has functional suspension and a proper wheels for overcoming obstacles. Every part has been adjusted for smooth supportless printing. Keep the orientation of the parts as shown…

Lucky 13 AR15

I made this useing parts from the original pistol for consistancy print as you would any of lucky's weapons .

Christmas CocaCola truck - printed in one piece without supports

[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…

Rubber Duck Snowball Maker

A rubber duck snowball maker.

Alternative Christmas Deer - Buck

His partner: https://www.printables.com/model/1473177-alternative-christmas-deer-doe Print Tips Material: AzureFilm - PLA Silk Gold Layerheight: 0.2mm Structural Support: No Infill: Grid

Psyduck / Enton Multi-Color MMU

Print it on the MMU2S.

Ice Hockey Puck

The ice hockey puck was missing in my games collection. Model is scaled down to the diameter of 4 cm. The Czech company Gufex is proud producer of the best ice hockey pucks in the world - www.gufex.cz.

Tesla Cybertruck

parts can be glued or screwed together, windows must be glued on to body, tires on the bed must glued to the body https://www.thingiverse.com/thing:4063298

Tesla seat belt | buckle - alarm stop

Found this print a long while ago on thingiverse. However, the file is gone and had to search my drive again… Wanted to grant you the opportunity to use it as well. Please be aware, that I personally use this device only, when I am having…

Seat Belt Buckle Holder

Frustrated with the seat belt buckle pushing down into the seat when you're trying to buckle? Look no further, the solution is here! My five year old daughter would scream in frustration when trying to buckle up in the car. Now with this…

Plastic Knuckles Pack

My Own Take on Plastic Brass knuckles designed thicker to be nice and strong around your fingers. PRINT: Infill- 30% cubic Layers- 0.2mm 4 top and bottom Perimeters- 3 Brim- None Support- None

Mini truck with trailer - tanker (printed in one piece without supports)

[ENG] Miniature truck with tanker trailer and spare wheels printed in one piece without supports. The model can be printed either as a whole - tractor with semi-trailer connected (it is possible to disconnect it after printing), or the…

Lucky 13 - Rock face

Who doesn't want a Dwayne Johnson head for their Lucky 13? That's right! Everyone wants one! And now YOU can have one! Scaled to harmonize with the proportions of Lucky 13. And sliced diagonally at the back, because it looks good! Remixed…

GoPro Quick Release Buckle with Flexible Locking Tab

Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…

Barbie/Oppenheimer Popcorn Bucket

Looking for the perfect receptacle to enjoy your popcorn from at your Barbie/Oppenheimer double feature? Look no further than the Barbenheimer Popcorn Bucket, fashioned from the Fat man nuke pen cup by Domes . What better way to celebrate…

Tesla CyberTruck

This is my make of a small model of the Tesla Cybertruck that I found at https://www.thingiverse.com/thing:3996654 . I created the .3mf files that are attached Print instructions I used rafts and supports and had a bit of an issue with…

Five Gallon Bucket Opener

This is a five gallon bucket opener, used to pry open the lid. Note that the .stl has a high polygon count. If you import it into prusaslicer use the simplify mesh ability to reduce the complexity and make slicing easier. The model is…

Drippy Bucket! With Bigger Drips and Paint Leaks.

Drippy bucket, its now leaking paint onto your desk. Bigger drips and large and small paint leak's. PSA: I am not responsible for damage to any of your property from leaking paint! Inserts for the Drippy bucket found here.…

3D printer tool box / Werkzeugkiste für 3D-Drucker-Werkzeug

Width 207.40 mm Height 80.00 mm Depth 105,00 mm Simple tool box with receptacles / compartments for e.g. calipers, precision knives, tweezers, pliers, spatulas and other tools and accessories that you like to have on the printer. For…

Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix | Dreibackenfutter für Revopoint Zwei-Achsen Drehteller

This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…

Batman duck bathroom companion

Hello, Batman duck bathroom companion. Thanks for your download, enjoy the print!

Duck Alligator

Duck Alligator

Ski Boot Buckle Lever Tool

A tool which makes closing buckles on ski boots easier. Printing I used 0.3 layer height and 5 (or more) perimeter walls. Additional perimeter walls add rigidity.

Flexible Face Mask Buckle (PETG)

A redesigned version of the face mask buckle with flexibility built into the design. The accordion design adds elasticity to the buckle, providing relief to the wearer while still maintaining the necessary rigidity. Design is currently…

3D Druck Abteilung Schild (also in English)

+++ENGLISH BELOW+++ 3dimensionales Warnschild für die 3D Druck-Abteilung privat oder in der Firma. auch mit Single Extruder Druckbar. Für den Druck beachten: Alle Teile einzeln slicen aber in der richtigen Höhenpostion. Bei dem Düsen…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

Radio Knob, 1995-2005 Chevrolet GM Trucks & Vans

The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…

Halo Energy Sword for LUCKY 13 (With Revision)

This prints in two halves so that either half can be held in the default accessory-holding hand of LUCKY 13. This does not need any supports. Edit: I've now included a full hand replacement that tends to be more stable than the two-part…

gridfinity 1x2 bin dremel tools, spanner, chuck and std. dremel 3.15mm (1/8") tools

Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…

Purse or bag holder for car, truck or SUV

My wife mentioned she'd like a hanger for her SUV to use with a purse or bag so I surprised her by designing this model (she liked it so points scored!). Unlike Amazon products this one attaches securely and can't fall or slip off the…

Wolf Tail for Dummy 13 / Lucky 13

A Wolf tail for your Dummy ! Since i didnt find a tail and wanted to make my dummy furry like i decided to make one, and there were also few people who wanted this tail! Its the simpliest design and still movable as the whole Dummy! -…

jewelry box - Schmuckkästchen

My daughter asked for a personal jewelry box. And this is what we both developed. The box has more tiers to store the “treasures”: In the lower part you can store the big things The middle insert can be filled with rings and earrings. So…

Donald Duck bookmark

You are doing me a big favor by clicking the Like button :-) Layer height 0.10 mmm Start with light blue Change on 0.7 mm to white Change on 0.9 mm to Blue Change on 1.1 mm to black Change on 1.4 mm to Orange Or use paint In the slicer…

Leather stamp - Duck

Leather stamp - Duck Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done

ICE HOCKEY PUCK - Mighty Ducks Logo

3D Printed Ice Hockey Puck with Mighty Ducks Logo Textured Wall Surface Printed in PLA - no supports required. Surprisingly glides across tiled surfaces!

Bucket Spinner Live Mouse Trap

This is a live bucket trap for catching mice. I am currently using it in my attic and have caught 4 mice with it in a couple of days using peanut butter as bait. The mice venture out onto the spinner to get the peanut butter and then…

Daffy Duck

Daffy Duck Cartoon character from classic Looney Tunes in 2 different design poses. Single extruder 3 color design. First bottom layer: White Second layer: Orange Third top layer: Black

Duck Surfing Keychain

Easy to make a Duck surfing keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Keychain Buckle / Quick Disconnect

I hate any bulk to my keys. So, I only carry around the keys that I need. This buckle acts as a quick disconnect for some of your keys. Maybe for 1 key or for a whole set. Colour code them even! These are both smaller and lighter than the…

Lucky Charm - Four-Leaf Clover

Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…

Die erste Osterdekoration ist gedruckt :-)

Weihnachten ist gerade vorbei - da steht Ostern vor der Tür. Für meine Frau habe ich die erste Deko gedruckt. Gefunden habe ich die Hasen hier: https://www.thingiverse.com/thing:1395704 Gedruckt habe ich mit “Fuzzy Skin” Christmas is just…

Z scale DAF XF Euro6 Fuel truck

Downscaled to Z scale. Tractor details were reinforced so could be printed at this scale. Trailer was designed mainly from photos and actual fuel trucks specs.

Cyberpunk 2077 — Panam’s Tri-Buckle

Heck yeah! That is how it’s done. I simply cannot believe we pulled that off! Perhaps not the cleanest job, but not bad for a spur of the moment thing. Wait until Saul sees this… Ha! He’ll have smoke coming out of his ears! Yikes, you…

Z scale dump trucks and trailers

Downscaled to match Z scale dimensions

Glücksbringer / Talisman / lucky charms Kleeblatt Herz

sehr schnell druckbarer Glücksbringer für Silvester in verschiedenen Varianten keine MMU nötig, einfach Materialwechsel bei 2mm einfügen Very fast printable talisman / lucky charms for New Year's Eve No MMU needed, simply a material…

Daffy Duck Looney Tunes

Hello, Welcome to my profile, full of models and miniatures :-) I have Daffy Duck from Looney Tunes for you for an exhibition or diorama. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If the…

Pin Vice / Pin Chuck

A pin vice, I wanted too be able to keep a couple of these around with known drill sizes in for deburring holes or reaming out dowel holes in 3d prints. I've seen one or two models about but they seem sized only for 1/8" shank pcb drill,…

Knight of the Duck

In an alternate universe, there is a war raging on. A war… about castles ! Between ducks ! Pick your favorite friends to fight against and take charge of a duck, leading it to victory in this DnD inspired board game with a dynamic board,…

Glücksbringer / Talisman / lucky charms Hufeisen

sehr schnell druckbarer Glücksbringer für Silveste kann mit und Ohne MMU gedruckt werden, ohne MMU einen Materialwechsel bei 3mm einfügen Very fast printable talisman / lucky charms for New Year's Eve Can be printed with and without MMU;…

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Revopoint Dual-Axis Turntable Holder for Nano Vise 2.0 and Nano Chuck / Revopoint DATT Halter für Nano Vise 2.0 und Nano Chuck

Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…

Airless Hexagonal Hockey Puck

This model is 3 inches in Diameter and 1 inch tall. its thickness is 0.2 inches and the distance between the removed hexagons is 0.1 Inches. This model was printed in 2 parts and superglued together. I would recommend printing with a…

Cybertruck Rear Emergency Door Release

The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket. This makes it very unlikely to be found should an accident render the electronics unresponsive which could be deadly. This model…

Druckluftschlauch-Wandhalterung - Compressed air hose wallmount

Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…

osprey buckle

Version 2: Files with -v2 contain a slightly modified buckle with more space for the strap, which should work better when scaled down.

Glücksbringer LineArt Schwein / Talisman / lucky charms pig

sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve

40mm male side-release buckle (Quechua/Decathlon)

Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…

Honda Ruckus/Zoomer LED Headlight Adapter

The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…

Duck Kitty

Duck Kitty

Lucky 13 Old WheelBorrow

Wheelborrow to hold your rings. Some fiddle is currently required to get proper fit.

Prusa XL Nozzle Brush & Debris Bucket

This variation of the Nozzle Brush and Debris Bucket from @Alvomane came about as I wanted to use slightly different style of silicon brush than the original. So rather than just modify the brush holder, I modeled up both since they work…

Ender 3(pro/v2) purge bucket

This is a purge bucket designed to fit on the front right bed bolt on an ender 3 or variants. This allows for minimal wastes, nozzle cleaning, and priming of nozzles for dual extrusion. The hotend purges into the bucket which then drops…

Baby Monitor / Babyphone Betthalterung Hauck Reisebett-Halterung für Philips Avent SCD845/26

Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…

Tuck and hook (v2) minimal filament clip

This is a minimal filament clip that employs friction to hold down the loose filament end. Tuck the loose filament end into the angled hole then hook the clip to any strand on the spool. The angled hole should improve the friction to hold…

Cybertruck Wastebin

Nice use of space in the door. Both the bin and the lid require supports. I highly recommend using PLA for the support and PETG (or ASA) for the body since this leaves a nice finish without any need for sanding or other post-processing.…

Cup holder 100 mm to fit Starbucks "You Are Here" Mugs

Modified version of "cup-holder_95mm" to fit Starbuck "You Are Here" City Mug Collection, which are unfortunately 100mm. The gcode uses some modifiers to speed up printing, the 3mf project file come with the same modifiers, in case you…

LLV Service truck

Based on Grumman LLV USPS mail truck. Size 1:18 , Slightly tuned with customized two-liter 4cyl. Turbodiesel. Optimised for easy print with no supports. This toy car has opening doors. NOTE: No supports required. (Case has reinforcements…

Duck with saxophone

Duck with saxophone

Voron 2.4 Nozzle Brush with Removable Purge Bucket (6x3 Magnets)

This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…

Leather stamp - Duck footprint

Leather stamp - Duck footprint Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done

Knuckle Duster McDonalds

Please click if you appreciate my work :)