84 modeli
I do sail and 3D printing allows me to manufacture the never ending flow of spare parts an ageing boat requires and some gadgets to improve (or so I say) life on board. This thing comes to the second category. On a boat, room is scarce…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small stand to mount the Lego UCS Venator. the Build reuses the Attachement-points (Instruction Book 1 - Steps 256 and 275). Use the orange Pins to attach the stand, and reuse the 4x4 Plate in the Back. This can be done after the Model…
This model is a remix of: https://www.thingiverse.com/thing:5251321 Scale about 1/10. I did following changes: I fixed the model so it's 3D printable Attempted to turn the model into european version: removed trunk lid handle added dual…
An angled wall mount to allow you to mount the Lego UCS Gunship (75309). This set is notoriously difficult to display due to its large wingspan. This mount utilizes the Lego's original stand mounting location in the floor of the ship, so…
Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.
Wall mount pieces for Lego set 75355 UCS X-Wing 3-piece set to mount Lego set to the wall. Wall mount is angled in a way to show X-wing in flight, with enough clearance to allow all S-Foils to be locked in attack position. 3 pieces…
This is a wall mount for the LEGO UCS X-Wing Starfighter (75355). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle to keep it secure. There are…
Revised all files in April 2026. This is my interpretation in Gauge 1 (1:32) of the Kds 54 / Ucs 908 Silowagon operated by Deutsche Bundesbahn. http://www.dybas.de/dybas/gw/gw_u_9/g908.html…
Wall mount pieces for Lego set 75382 UCS TIE Interceptor (2024) 2-piece set to mount Lego set to the wall. Wall mount is angled in a way to show the Interceptor in slightly tilted down position, mainly as its mounted above head in its…
Secures the Razor Crest to the wall without requiring the set to be modified in any way. Because the top panels and canopy are not secured very well on this set, I would highly suggest hanging the set on the wall without these panels…
I recommend printing my improved version: https://www.printables.com/cs/model/654548-improved-seat-tracks-cover-for-hyundai-tucson-nx4- Layer height: 0,15 mm or lower Supports: yes, organic supports works great You'll need to print two…
This design allows you to wall mount your Lego Star Wars UCS Slave 1 vertically. After printing I had to file all the corners as my printer doesn't quite make them square. I probably over-engineered this as I'm paranoid about it jumping…
Remixed wall mount adapter for the LEGO Millennium Falcon 75192 to use a VESA TV mount. This design removed the need for the long technic pieces and will friction secure the top turret. You need to move four of the internal black support…
dust cap for the headlight of a Hyundai Tucson. I lost one of the dust caps while replacing a headlight so i made this design to replace it. Print instructions There are 2 printable parts, 1 dust cap and 1 seal ring. I recommend to print…
Wall Mount for Vertical Stand available for Lego 75192 UCS Millennium Falcon. Designed a wall mount for use with a modified Vertical Lego stand available for the 75192 UCS Falcon. (Search for Efferman Vertical Stand here , or amazon link…
5 perimeters, 6 top, 6 bottom layers, 30 % gyroind infill. No supports. To be pressfitted/hooked in the slit under the rear seats release lever. Use thin (0.8 to 1 mm) doublesided tape to secure hook in the place. See image bellow where…
I took MKV's armrest storage box for 2022 hyundai tucson and removed dividers in the tray, added a pick up hole and rounded the edges. Thats all.
I wasn't a fan of all the supports required from the original model, so I remixed it to improve rigidity, remove supports, and angle the fighter downward. STLs have been exported in the optimum print orientation
Vytisknul jsem několik modelů než jsem trefil správné rozměry výřezů a hran na kterých kastlík drží pod opěrkou. Sedí skvěle.
What has been improved matches the look of the original cover much more sturdy better and more secure fit doesn't prevent the seat to be moved all the way to the front Print settings matte black PETG Layer height: 0,2 mm or lower 2 walls…
Tray for the drawer of the Hyundai Tucson NX4 FL (2025), designed for the Hybrid version with a steering wheel-mounted automatic shifter. I'm not sure if the drawer is the same for other versions. It fits perfectly, closes securely, and…
Made up a wall mount for the 75367 UCS Venator, display the ship at 90 degrees rather then usual 45 degrees. (Due to available mounting space restrictions) Makes use of some of the technic pieces from the sets included stand, I also…
This design allows you to wall mount your Lego Star Wars UCS Snowspeeder horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how…
A friend was looking for a Vertial Wall Mount for a UCS Venator 75367. We couldnt find a public solution so I took took the measurements and created my own. Slicer Settings: Layer height: 0.2 Wall Loops: 6 Infill: 25% Overlap: 15%…
Remix of Sacy's C220 M3 drive caddy on Thingiverse. Cut 2mm off the entire length of the right side so it would fit into the drive bay of a Cisco UCS C220 M5 1U server. Also, cut a notch out of the back left side to make clear the…
This design allows you to wall mount your Lego Star Wars UCS Y-Wing horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed…
There was no Free Wall Mount so I redesigned one fro the Original Lego Slave 1 to fit the new one. I printed mine in PETG with 20% infill and 6 Walls. Mine is holding perfectly stable but I wont garantee that I can't drop down due to…
Cut back stand to fit onto Bambu Lab P1S/A1/X1C Build plate. I Used the original Front Stand from Original Make.
This design allows you to wall mount your Lego Star Wars UCS Red Five X-Wing vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed in your…
Wallmount made in onshape that lets you display the Lego Tie Fighter UCS 75095 using the same method that the display stand uses. The wedge shape allows you to hide the screwholes for a clean mount. I included a recess on the front of the…
This design allows you to wall mount your Lego Star Wars UCS A-Wing horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed…
-Preguntar cualquier duda del modelo, Sígueme para ayudarme a crear mas modelos, un saludo amig@. Feliz impresión 3d !!!
Wall mount for the LEGO UCS A-Wing Starfighter (75275). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle so that fins and nose clear the wall.…
This design allows you to wall mount your Lego Star Wars UCS B-Wing vertically. Please note, in the pictures above I tried to make the ship side of the mount look a bit like Lego, but it looks terrible (as does the white filament). The…
MOD. HYUNDAI TUCSON (2007) Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Wall mount pieces for Lego set 75275 UCS A-Wing 2-piece set to mount Lego set to the wall. Wall mount is angled slightly to show the A-Wing set slightly tilted out, to give a different view then a head on/flat view. (Around 20 degrees) 2…
Wall mountable holder for a Lego Star Wars UCS description plate.
Tried Sacy's model for a Cisco UCS C220 M3 drive caddy but found two parts were not letting the drive fully slide in. Modified the design to remove the small bits in the back left and right that were in the way. Updated model now seats…
Theres another remix that splits the back stand but I wasnt the biggest fan of how it was split. I instead split it different way that made more sense to me, as well as added holes to join the two peices together due to the weight of the…
EPB switch design on Gen3 Hyundai Tucson is questionable at best, so the latches that hold the actual switch are qute weak and tend to break. This (reverse engineered) design allows one to atempt a fix of the switch instead of buying a…
These are designed by the University of California, San Francisco medical school: https://www.library.ucsf.edu/news/ucsf-3d-printed-face-shield-project/ They use standard 3 hole punch clear binder covers. The strap is formed using three…
Math Art : Strange Attractors : TSUCS1 Designed in Blender - Curve Modifier Add On. Strange Attractors: An Overview with Focus on TSUCS1 Introduction Strange attractors are fascinating mathematical objects that capture the essence of…
This is adapter for a Hyundai Tucson Rear Seat cup holder to suit Yeti 18oz/532mL Rambler.
Přihrádka do prostoru v područce (přední část) pro automobil Hyundai Tucson NX4 s automatickou převodovkou. Po přidání 1mm filzu dle fotek pasuje jak má. Oproti fotkám přidány do modelu výřezy pro středící kolíky a gumu od područky (na…
I created this simple wall-mounted arm mount for all of our Lego Star Wars UCS air ships. They all seem to have the same square mounting hole in the bottom where they connect to the black stand that comes with each model. This wall mount…
Who doesn't love Pirate Robot Cookies! FRC Team 4160 presents our Pirate Robot Mascot as a Cookie cutter.
A din mount for the UCSB breakout board, you need to pickup the clip from Thing files for AXBB-E Din Mount by Aperacing - Thingiverse to use for this model Thx to Aperacing for the design Designs - Thingiverse I bought the heat inserts…
Tucson 2022_charging area
Držáček dělán pro Hyundai Tucson NX4, do kastlíku pro mobil, abych mohl používat jednoduše Android Auto. Sedí na kabel vention type-c 90°, ideálně 0.25m Mobil Samsung A54 s krytem při skládáni potřeba trochu zabrat, ale jinak sedí dobře.…
This is a stencil of the No Graffiti Sign that is plastered upon the walls of the defunct Graffiti Hall. Category: Signs & Logos
Handschuhfach-Organiser
A practical 3D printable headrest hook compatible with Hyundai Tucson IV , designed to mount on the metal rods of the front seat headrest. Perfect for hanging: jackets and coats handbags and backpacks grocery bags small shopping bags…
Belt lid replacement for Hyundai Tucson models 2004-2010
Tucson_2022_Phone holder
This Ash Tray / Bin for Hyundai Tucson (2022-2026) is designed to be placed in the central cup holders. Ideally print from ABS as the car can get very hot. You'll need to put an axle through the opening for the lid to work. The model…
I've bought a variety of insulated mini mating nucs to test. All of them include a lot of various bits and bobs that are very easy to lose, and not always easy to replace. Here is a good variety of replacement parts for the mini mating…
The Hyundai Tucson features a deep storage compartment in the center console. I liked the design by mbellido, but I wanted to make a few modifications, such as adding a handle and a coin holder. Unlike the original design, this version…
I wanted a way to mount my gigantic Lego Ultimate Collectors X-Wing (10240) on the wall since it took up so much room on shelving. I've seen this done with the Millennium Falcon, but nothing for this model in particular. This mount uses…
General Design I wanted to place my Venator on top of my bookshelf, but the stand didn't raise it up enough to clear the side wall. I wanted to keep the design relatively simple while also maintaining stability of the Lego. So here we…
The funnel adapts to the shape of the nuc, making it easier to deposit the bees. The funnel does not obstruct the sliding bottom of the nuc. This model is dedicated to APIDEA mating nucs. L'entonnoir s'adapte à la forme de la ruchette, ce…
Finally got a new car! It's wonderful, but there is nowhere to put a tissue box or trash box. So here's a tray to hold a "standard" square tissue box and a cute, little trash can I got on Amazon.…
Hello everyone, I have a hyundai tucson 2024 and having a big armrest storage is a mess in itself. S I designed an arm rest organizer that is useful for storage of certain items. card box - for storage of card and cash bills, medicines,…
Hi! Made this to replace the broken seatback angle adjustment knob on our much-loved Hyundai Kona EV! It appears to be used on other Hyundai models as well like the Tucson and i30 I believe. Part number is 88121-A6000. The mounting clips…
Here is a model I made to display the UCS Gunship on a wall. This set is very hard to display because it's both super deep and super wide. This mount should help find a suitable location that won't take up a lot of room. My…
There are three coaster body STL files provided, each one has a different clearance between the coaster body and the inserts of 0.2mm, 0.3mm and 0.4mm respectively for v1, v2 and v3. I am including the Fusion 360 archive file so you can…
I developed a smartphone holder for my new Tucson NX4. I use the CUPHOLDER for this and can easily place my S25 (and S23 also) The model is adapted for ASA. I would also recommend this as printing material. PETG is not durable enough for…
Printed versions available for sale on Etsy
The Tucson doesn't have a sunglasses pocket over the mirror (at least mine doesn't) so I created this simple holster to store it in the driver-side door pocket. It's out of the way, not easily visible, and easily accessible to the driver.
I have created a holder for 1x4 LED bricks that fits into the 75192 USC Millennium Falcon. The holder is specifically designed for the Millennium Falcon MOC-37267 “Millennium Falcon UCS Engine MOD v2,” but with minor modifications, it may…
Hole dia. is 5mm. You will need a pretty long extension to screw in the top screw, acces holes are pretty large tho. The origial stand is being used and may only need a couple of pieces facing the wall removed. Please see the picture for…
rear window lift handle Hunday Tucson JM
This is my first design printed in PLA with supports. Infill 20% if you have bad adhesion on bed print with brim on the pins so they don't pop out of place during print Recommend PETG if the temps are too hot behind the servers. Printed…
Coasters with the UC San Diego (UCSD) Triton logo on it. Two versions included, one for printing in two colors and one for printing in three colors. Layer heights are varied to accommodate printers with single filaments. If you have a…
A wall mount to allow a lego partial stand to attach for mounting the Lego UCS Jango Fetts Starship (Slave 1) to a wall for when you run out of shelf space. I used 2 threaded drywall anchors to secure the screws into the wall then made…
3D printable topographic miniature of Tucson - 🇺🇸 United States Capture the beauty of Tucson 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 32.223, -110.975…
A practical 3D printable headrest hook compatible with Hyundai Tucson IV , designed to mount on the metal rods of the front seat headrest. Perfect for hanging: jackets and coats handbags and backpacks grocery bags small shopping bags…
This Ash Tray / Bin for Hyundai Tucson (2022-2026) is designed to be placed in the central cup holders. Ideally print from ABS as the car can get very hot. You'll need to put an axle through the opening for the lid to work. The model…
This design allows you to wall mount your Lego Star Wars UCS Slave 1 vertically. After printing I had to file all the corners as my printer doesn't quite make them square. I probably over-engineered this as I'm paranoid about it jumping…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
3D printable topographic miniature of Tucson - 🇺🇸 United States Capture the beauty of Tucson 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 32.223, -110.975…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I've designed a stand for the glorious UCS LEGO Venator (75367), which holds the ship at a 45-degree angle to show more of this cruiser. The stand joints are fully LEGO compatible and fit perfectly for the original stand's designated…
![[BETA] Display Stand Vertical for LEGO Star Wars 75442 The Mandalorian's N-1 Starfighter UCS](https://media.printables.com/media/prints/9bd68285-211a-4010-991e-ec3e62ee8b5b/images/13092277_127323bd-0353-4825-a55a-97f70c0dbcfd_c12c742c-d7b8-412d-8e02-03eb9464376d/img_20260606_003026.jpg)
