Wyniki wyszukiwania: ump

Mini Pumpkin (Thanksgiving/Halloween)

Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…

Knitted Pumpkin

The Knitted Pumpkin is a charming decorative piece that brings the warmth of autumn indoors. Designed with a textured knit pattern, it combines the rustic feel of fall harvest with the cozy touch of handmade crafts. Perfect for seasonal…

Desktop Dumpster

I'm a big fan of the “dumpster fire” theme. So being able to have a functioning dumpster on my desk is fun. On my work desk, I find it handy to stash thumb drives, yubikeys, lip balm, pencils, etc. Right next to my printer, I find it…

Gourdo the Pumpkin

Here are the files for Gourdo the Pumpkin. a cute little pumpkin for your Halloween decorations. you will need a little support for this pumpkin, but I painted supports on the teeth and eyes to avoid supporting the whole pumpkin. The…

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Pumpkin spiral fidget toy – twist fun

🎃 Pumpkin Spiral Fidget Toy – Twist Fun for Halloween - now with Ghost! 👻🌀 Here comes something else for Halloween or Thanksgiving: a pumpkin with stem and leaves that comes with a special twist ! The upper part can be turned out,…

Apple® iPhone XR case and bumper

D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…

Bao Bun Dumpling Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Support from build plate only Seam: Rear/Back If you like my work consider Buy me a coffee 😊 Check ou my other cute keychain

My Horse Club : Jumping obstacles set (#3)

No Support. Glue not required.

Ball Pump Needle

Because those metal needles break quite easily, I needed a quick solution to inflate one of our kid's toy basketballs. There are two version: with a DIN VG 5.2 thread, which can be found on most ball pumps with a thread like Schrader…

Cupholder for Citroen Jumper, Fiat Ducato & Peugeot Boxer

This is a drink holder for the Citroen Jumper, Fiat Ducato & Peugeot Boxer. The print area should be sufficient for most printers. (Diagonal printing) Function: 2 - cup holder 2 - pen holders 1 - Tray for keys or mobile phone Important:…

Autodrom/Autoscooter/bumper car Chip

Printed on an Ender 3 V2 20% infill Rafts Support Surface Ironing enabled, 10% extrusion PLA, 201°C Nozzle, 60°C Bed There are a lot of these types of Models online, take a look the first picture to see if your dimensions match with my…

Pumpkinface Chibi – Cute Horror Icon for 3D Printing

🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7543982571361815830 ℹ Discription: This chibi-style Pumpkinface figure was custom-designed to blend playful proportions…

Halloween pusheen cat pumpkin decor

Hello there folks. I wanted to share with you our newest model of pusheen pumpkin cat :) Specs : Print with 0.2 layer height That's all folks :) Print Using MMU3 or AMS

Pumpkin Kit Card

An almost flat card that quickly assembles into a cute pumpkin. Choose loose or as a card.

Voronoi Halloween Pumpkin / Tealight Cover

This stylish pumpkin Halloween decoration looks great during the day and creates a mysterious atmosphere when the lights go out. Simply place an LED tea light in the pumpkin and enjoy the flickering shadows through the voronoi pattern.…

Safety Door Stopper/Bumper V2 (2023 Design) - 7 sizes & clip for creative design

The Safety doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…

Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow for Prusa Mini

Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…

Mario Pumpkin Head Trend.

Mario with a pumpkin head. gcode includes organic supports.

Bosch KIOX Protector / Bumper Case

My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…

Halloween Pumpkin Mug (V2)

This is the second version of my Halloween Pumpkin Mug. Compared to the predecessor I uploaded on Thingiverse about a year ago ( https://www.thingiverse.com/thing:5545774 ), I improved the handle and the bottom a bit. Supports for eyes,…

Pumpkins candle holders for tea light with Lid and Stacking Rim

Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…

Pumpkins - Halloween (Decoration) Vase Mode

Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season

halloween jack skellington pumpkin

jack skellington pumpkin three-part, outer diameter approx. 85mm Scalable up to approx. 50% 75% for use with normal LED tea lights. The upper and lower parts require a support structure for printing. Print alignment as specified in the…

N Scale Bumper

This was designed to be functional first, then aesthetically pleasing, with realism and scale being my least concern. I wanted a "bumper" that was actually a wheel stop. I did not want my couplers crashing into anything, and I didn't…

Fairphone 4 Cases, Bumper & Card Wallet

The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…

Jumper wire/cable holder/organizer V2.0 (for Arduino, Elegoo, etc.)

Update 2nd March 2024: Version 2.0 is now available , based on very useful feedback, thanks all. stl files can be dragged into any slicer for gcode. STEP files and SolidWorks files are provided if you want to add your own holes (for…

Olympic Barbell Vertical Wall Mount + Bumper

I really liked Todd Pousson's design for an Olympic Barbell Vertical Wall Mount , but wanted to mount the barbell holder on a brick wall and use larger bolts to secure it. I designed the mount from scratch and added in the required holes…

Pumpkin_Lamp - Halloween- Kürbislampe für elektr. Teelichter

Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…

Articulated Pumpkin (Print in Place)

Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.

Mini Pumpkin Buddy

This Mini Pumpkin Buddy is a tiny and adorable companion, perfect for decorating your desk, shelf, or workspace. 🎃✨ ✅ Super Small & Cute – A tiny pumpkin buddy for any occasion ✅ Perfect for Fall & Halloween Decor – Adds a festive touch…

Dumpling Maker Baozi Mold

I designed this model to make dumplings, fast and simple, I hope you like it and enjoy it!!

Jumping tiger

Mini statue of a jumping tiger Print instructions To avoid having to use too many supports, print in hallves and glue them together. (The uploaded gcode file is set up this way)

Peristaltic Pump (simple & working) for an automated fertilizer

Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…

Prusa XL screen guard LCD bumper status bar dual color

Remodeled the whole thing and wanted to give everyone the freedom to do adjustments themselves.

Spooky Halloween pumpkin decoration / Unheimlicher Halloweenkürbis Dekoration

You do not know what to print for Halloween? How about this Halloween pumpkin with lid, big enough for one or 2 LED tea lights. (ex: https://amzn.eu/d/cHnOr0r) Dimensions: Diameter approx. 101.20 mm Height approx: 90.06 mm Printing:…

desoldering pump HSW holder

Holds a desoldering pump on the honeycomb storage wall.

sunscreen / protector for double DIN Radio Citroen Jumper

This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…

Low Poly Pumpkins

Just a simple low poly pumpkin, with multiple versions. Enjoy! Please like it if you do and leave any comments! If you're really feeling generous please consider buying me a coffee so I can keep creating! Check out my TikTok ! Check out…

Hobby 5V DC motor pump

ENGLISH description: 5V DC motor pump used in automatic plant Arduino watering systems. I have used this design to make my School project easier. Pump is using 1cm of diameter tube for water and 3screws with nuts for holding the pump…

Trumpet Valve Guide

Trumpet Valve Guide made for J. Michael trumpet , maybe suitable for other brands. We couldn't find suitable part to buy, so I measured and designed something that does the job. You can find dimension sheet in the files for comparison, if…

Standard Asthma Pump Holder

This is an asthma pump holder for people (such as myself) cycling or riding their motorbike - this can be mounted to the handlebars. Actually this holder can mount to anything that is round in shape and no larger than 50mm in diameter.…

GumPod Remix - Print-in-Place Gum Case

Remix of https://www.thingiverse.com/thing:4894166/files A simple travel case for those who often keep a pack of gum on them. Much studier than the typical disposable paper-backs but small enough to fit efficently in your pocket. Remixed…

Organic Pumpkin lamp cover

Get into the spooky spirit with this intricately designed 3D printable Pumpkin Lamp Cover, just in time for Halloween!

Dog agility jump parts 1" PVC tubing

Cut 8 pcs 12" long for feet Cut 2 pcs 36" long for posts. Cut 56" pieces for the jump bar. I used hot glue during assembly as well.

Jig for bending components & jumpers for 0.1" breadboard/Veroboard

Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…

jumperwire holder

Jumperwire holder You need to print the "holder base" and glue it together with the "jumperwire holder". Print base “on it's back” with 10% gyroid/grid infill and grid support from build plate only. Print comb “on it's back” solid with no…

Cole Jaw Bumpers for wood lathe chucks: Nova, VicMarc, etc.

IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…

Trumpet holder for music stand

Trumpet holder is printed with ASA, grinded and smoothed with aceton where trumpet is in contact with the holder. To assemble the trumpet holder, you need a hexagon screw M4x60 or you make your own by cutting a threaded bar and adding 2…

Pumpkin sensory tray

Toy. Sensory tray for kids.

Jumper T20S RDC90 Gimbal Protector

Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…

Eufy RoboVac Bumper Lip

My RoboVac tends to get stuck under objects which are just the right height for it to fit under and not be able to leave, especially the fridge and some rolling chairs. This bumper lip raises the height of the bumper by 3.6mm to prevent…

Air Pump Nozzle

I really like large air pumps like the 10 PSI Quechua from Decathlon because they move huge air volumes in little time. But they are mainly made for tents, boats, kites or mattresses. You can't inflate toys, swimming aids or children's…

Transformers Autobot Cliffjumper Bobblehead

Bobble the head of your favorite Autobot Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…

Pumpkin Flower Vase – Halloween Decoration

This 3D model is a pumpkin-shaped flower vase, ideal for festive Halloween decoration or general decorative purposes. The design blends modern and festive styles, making it perfect for adding a unique touch to any space. No supports…

Little Pumpkin

Little pumpkin for decoration

Water Pump Adapter for Costco Step2 Double Rain Showers Splash Water Table

A simple adapter to mount a cheap water pump onto a water table for kids. Reason: Mounts to the table, allows us to turn the hose off, but still lets the kids play with running water that rains down from the top of the table. Water table:…

Humpback whale Bracelet holder and ring tray

This is a model I made with the idea of making a whale breaching. I went with a bracelet holder and ring tray, since prints gotta be practical or it's rough to get it out there. Prints well in most materials, no supports needed! The file…

Humpback whale jumping out of MasterLiquid Atmos CPU Cooler

During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…

Jumper Wire Sorter (Organizer kablikov)

EN: Jumper Wire Sorter - remix, with less material, faster print CZ/SK: Remix, kde som ubral material a zrychlil tlac.

EKWB D5 Pump to Radiator Mount

I printed this model with 0.2mm layer hight and minimal support as shown in the picture. Please don't judge my print. It was only a high speed print as a test piece. It was working fine and I had no time to print an other one yet. Let me…

halloween pumpkin earrings thinner and smaller

the g-code has the proper height of layer for the manual color change

Stencil: Pumpkin

Stencil: Pumpkin 20 cm

Oběžné kolo pro ponorné čerpadlo / Impeller for submersible pump

Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.

Humpback whale 3 (two colours)

3 cm, 10 cm, 24cm, 4cm keychain

President Donald J. Trump Lithophane

Covert Instruments Bump Key Case

I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working. There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a…

Donald Trump Fridge Magnet

Uses 8*3mm magnets

Bumpy Door Stop

Door stop with a bumpy profile for increased grip

Deflate Adapter for Quechua Airbed/Pump

Do you own an airbed? Then you probably know the hassle of getting the last bit of air out the mattress to store it compactly. And in case you've bought yours at Decathlon, you probably wondered why Quechua pump you've bought to go with…

SILVERCREST handheld vacuum pump adaptor for ZWILLING vacuum storage products

I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…

Intex Pool Pump Impeller (SA3766)

This is a replacement impeller for an Intex pool filter pump, model SA3766. Also under brand name Aqua-Leisure. I printed this in PETG. PLA may not last very long in the pump. I've attached the gcode to print this on my Ender 3 Pro. Print…

Pumpkin Reaper with Scythe

Print HEAD Print CLOAK (when pause, put HEAD inside and continue printing) Print SCYTHE and glue it on CLOAK Check 3MF file. If you need his wife: https://www.printables.com/model/1058345-spooky-lady-ghost

halloween pumpkin #1

Halloween decoration.

StarJumper Space Rocket

StarJumper The space rocket About: StarJumper is a space rocket powered by Klima C6 rocket engines but can fly on engines from these categories: A, B, C, and D. StarJumper doesn't use any recovery system (parachute…) it is just going to…

Pacoone Tiny Air Pump Forclaz Trekking MT500 Air Mattress Adapter | Luftmatratzen Pumpen-Adapter

This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…

CENTRAL LOCKING PUMP

Repair part for MERCEDES CENTRAL LOCKING PUMP OEM 1688000248. Print Settings Brim: No Supports: No Infill: 20 Filament: Any PETG Layer Height: 0.15mm

Wall art: Cat and pumpkin (2)

Wall art: Cat and pumpkin - 20 cm, two colours

SKS E.V.A to Bosch Easy Pump Adapter

The Adapter connects SKS E.V.A. pump head on the Bosch EasyPump Printed with PETG, 0.15 layer height because of the fine threads The Inlay requires to be clued together with epoxy glue because of air-tightness. Do not forget to insert the…

Triumph Daytona side profile

2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).

Mistral SUP Pump Adapter for QUECHUA Air Seconds Comfort

DE: Dieses Modell ist ein Remix des ursprünglichen Mistral SUP Pump Adapters. Ich habe den Adapter speziell für das Ventil der QUECHUA Air Seconds Comfort ( Link ) Luftmatratze angepasst. Ziel war es, keine zusätzliche Pumpe kaufen zu…

Soporte Inflador Beto 2 way pumping

Soporte creado para la bicicleta optimus aquila y el inflador Beto 2 way pumping se crea con espacios para que ajuste el tornillo con cierta holgura.

Strainer Base for Bilge Pump

Replacement strainer base for bilge pump used in boats. Recommending to print in PETG and with 30% infill. I used " The Filament ReFill PETG 1.75mm MACHINERY ORANGE 1kg (PETG, 1.75 mm, 1000 g, Orange) " with quite good results.

VASEMODE Pumpkin LED Cap

Its a Ultrafast print at 150% of the gcode as of a crap Anet A8 V1 that can only do 50mm/sec you need to increase if you want FASTER Vase Mode with 2bottom and 5 Top layers for the print speed USE outer wall withd 0,6-0,8mm for close…

Citrouille à LED - LED pumpkin

Imprimée avec supports en activant la fonction “supports sur le plateau uniquement” Il est possible d'imprimer sans MMU en changeant de couleur ou en imprimant séparément la queue et la citrouille, ce sont 2 objets indépendants…

Soap Pump Stops

As we begin to put holiday decorations away, the better three-quarters asked me to model up some soap pump stoppers. Basically, the pump soap dispensers we used around the holidays do not have a thread to lock the pump in place. These…

Toy Dump Truck Bed and Hinge

The truck bed and hinge of a toy dump truck broke. I created a model that would fit on my Prusa MINI print bed. The truck bed and hinge can be connected with M4 screws or smaller, as long as the head is wide enough to cover the slots. The…

Decoration motif of a mysterious tree with an owl and a pumpkin

The decorations can be placed on the table or stuck on the wall. Double-sided tape. The motif of a mysterious tree with an owl and a pumpkin. It is printed in several colors. CZ Dekorace lze postavit na stůl nebo přilepit na zeď.…

VAG old 4pin petrol pump connector repair lock

Vytvořeno na opravu ulomeného zámku 4pin konektoru Fabia 1 (6Y5) palivového čerpadla. Mělo by být kompatibilní s dalšími starými modely koncernu VAG (VW/Audi/Seat/Škoda)

Stump Planter with Round Drain Bowl

Combined 2 designs in one. Used this one also https://www.printables.com/model/879721-bog-planter-with-moat

Rabbit Ears for a Pumpkin

These ears are meant to be stuck into a jack-o'lantern. To spooky it up, consider replacing the pink with monster green. Or funky goth colors like my daughter chose. Whatevs, she thinks it looks more Halloweeny that way. The regular…

Flanged Bump Connector

Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.

Missing MSR Whisperlite pump tool

Occasionally you need to disassemble the pump on a MSR Whisperlite camp stove. This tool is a special spanner to help unlock and lock the top pump retainer.

Humpback whale 4 (two colours)

3 cm, 10 cm, 24cm, 4cm keychain

SEARA ROBUSTA: Improved pump skewer sear

This is a remix of the sear from SillyButt's pump action skewer foam dart blaster . I was having issues with the sear not catching higher power springs well so I increased the width of the part of the sear that interacts with the plunger…

BOAT TOILET PUMP PISTON

The piston on the boat's manual toilet pump broke and the pump stopped working. Because I couldn't find the spare part in stock and I was forced to buy the complete pump, I decided to design and 3D print the piston I needed to repair the…

Coaster: Humpback whale 1 (three colours)

Coaster: Humpback whale (three colours) 10 cm, 20 cm

Modular Agility Course for Rodents – Jump Obstacle System

This modular agility course is designed for small pets like gerbils, hamsters, and rats. It features a base tunnel structure and interchangeable jump obstacles that can be adjusted or removed easily. Whether you’re building a fun training…

Apple iWatch bumper 44mm (iWatch 4)

This is a bumper to go over the screen, ideally to prevent a screen protector film from pealing up during use. Will work for only a Apple iWatch which is 44mm (iWatch 4 and earlier?)

Pumpkin Palm Screwdriver

Printed in Prusament PETG Prusa Orange 15% infill .15mm layer height and 6 perimeters with support turned on. Screwdriver bits fit snug, may want to scale up slightly for easier bit swapping. Included bgcode file for Prusa Mini+