Houslový klíč / Treble clef
Použitelné jako přívěšek, klíčenka, nebo jen blbůstka na stůl.
- Pobrania
- 385
- Polubienia
- 20
- Ocena
- 5
192 modeli
Použitelné jako přívěšek, klíčenka, nebo jen blbůstka na stůl.
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Radiuslehre für Außen- und Innenradius 1-25mm Es ist ein Remix von "@mibla" aber ich habe sämtliche Maße verändert. Geändert/hinzugefügt wurde: von M5 Senkkopfschraube auf M4 Zylinderschraube 30mm mit passender Mutter Innenradius 21-25mm…
This model is compatible with the lego system.
Lehre für Radien von 01-14mm in 1mm Schritten Print instructions Höhe des Text ist mit 0,2mm angelegt. Ich habe eine verbesserte Version erstellt: https://www.printables.com/de/model/211247-radiusgauge-v2-01-15mm
This model is compatible with the lego system.
Dies ist ein Remix von Lukass' Electric pole raillroad 1:87 H0. Der Mast wurde verstärkt und vergrößert. Es wurden unten Befestigungen zugefügt. Zusätzlich wurden Halterungen eingefügt, um alte Märklin Querträger und Ausleger zu…
This model is compatible with the lego system.
This model is compatible with the lego system.
Model of figure skating ice skates. Can be used as a pendant, key ring, necklace, etc.. Ideally print upside down with supports. If you like the model, please give it a like. ❤ Model krasobruslařské brusle. Lze využít jako přívěsek,…
This model is compatible with the lego system.
This model is compatible with the lego system.
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
Straight from the forests of New Zealand and into your printer comes this delightfully chonky kiwi bird, now in ultra-chibi form! With its big eyes, soft belly, and signature long beak, Kiwi is here to strut across your desk or shelf in…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Applebloom. She looks really cute. (My Little Pony fanart.) From the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645
This model is compatible with the lego system.
Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…
This model is compatible with the lego system.
Einfache Abdeckung für Lampenkabel Entweder um weiter zu leiten oder einfach abzudecken.
Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…
As my friend's water container did have a stop valve for letting out water and stopping it, but he did not have a good drain, so the water shot undisciplined out. This has come to an end now! Took the closing lid, drilled a Ø26mm hole in…
This model is compatible with the lego system.
This compact, portable case is designed specifically to store a Miswak (a natural toothbrush) and protect it from dirt or contamination. The case is crafted with practicality, ensuring convenience during travel or daily use. It features a…
This model is compatible with the lego system.
Support test of your 3d printer. By activating Tree Support > Hybrid you will be able to test both the normal support on the horizontal overhang and the tree support on the inclined overhang.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Ich wollte an meinem Pool eine Auslassdüse die schnell mit meinem Poolsauger kompatibel ist ohne ständig alles an und ab schrauben zu müssen. Ergebnis ist diese Version. Bestehen aus einer Tülle die im Pool verbleibt und einer Düse mit…
This model is compatible with the lego system.
You have absolutely nothing to do and want to entertain yourself? A useless box is the right solution! For this project you will need: Arduino nano board 2 servo motors of SG90 format Toggle switch of T80-T format Resistor ~ 220 Om Next,…
Druckeinstellungen Füllung 15% Schichthöhe 0,2mm mit Stützen
This model is compatible with the lego system.
violin key - houslový klíč přívěšek
If you want to print smooth surfaces but have to use supports for your model then there is a simple trick to do so. Just use PETG as a support interface in case you got an automated multi material handler. In my case I use an BambuLab X1C…
Softauslöser (AR-1) für die Nikon Kameras mit Außengewinde um den Auslöser. Getestet an S2, SP, F und F2. Wie stabil der Softauslöser ist habe ich nicht gestestet, aber er funktioniert. Eventuell mit einem stabileren Material als PLA…
Soap dish / Seifenschale mit Spülbeckenauslauf If you like it --> press like it :-) Zweiteilige Seifenschale mit Auslauf in das Spülbecken / Soap dish with two seperate parts and kitchensink outlet Habe vier Silikon-Dämpfer drunter…
This model is compatible with the lego system.
Printed with Prusa PETG. I recommend 0.15 Layerhight. Support is not needed.
Ich stelle hier einen Adapter zur Verfügun, der meiner Meinung nach das „umwelzen“ des Wassers im Pool verbessert und gerade in Verbindung mit einem Oberflächenskimmer einfach Sinn macht. Gerne Berbesserungsvorschläge und konstr Kritik.…
This model is compatible with the lego system.
These cubes continuously rotate around each other, while staying parallel to the x,y axes. No hardware is required. This project is the result of my study of non circular gears. PDF download:…
Consider supporting me on Patreon Scaled for 28–32mm play, but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal
An unserer Regentonne war es immer etwas schwierig, eine Gießkanne zum Befüllen unter den Hahn zu stellen. Mit dieser Auslaufverlängerung funktioniert der Absperrhahn und man kann (wenn gewünscht) ein kleines Schlauchstück aufstecken.…
Halterung für Igus, aber auch andere Lager mit den Maßen, die beim MK3S+ passen, sind ein Remix von einer Datei für den MK2 auf Thingie. Die originalen Schrauben können genutzt werden. Erst einbauen, ausrichten, dann leicht anziehen,…
This model is compatible with the lego system.
Adapter für den Grauwasserauslauf bei einem Wohnwagen Fendt 465 Bj. 2015 Hierzu gibt es noch unterschiedlich lange Verlängerungen zum Abwassertaxi. Wenn es euch gefällt, lasst mir bitte ein Like da.
The first stage of the rocket is also posted and can be printed this an additional stage that can be added if you want to make it a multistage rocket it was made for Estes rocket engines you need 2 centering rings
Islam / Muslim Confetti. I printed in PLA with 0.4mm nozzle with 1mm perimeters.
One-a-day vitamins / supplement / medicine tube, meant to go in an old fizzy tablet tube. Could of course be used for anything. Feel free to use and improve the openscad file. Probably should be printed with supports for the "handle".…
This model is compatible with the lego system.
-This model is intended for ½ of standard sheet - 115 x 280mm or 4.25 x 11in -Prints diagonally on 250 x 250 bed
This model is compatible with the lego system.
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
[CZ] Vykrajovátko na cukrováí pro milovníky matematiky [EN] Sugar cookie cutter for math lovers
Prints with .4 or .6 nozzle. It can be perfectly used with the lid of the remixed model itself. Max width of the top openings is 1.9mm and 2.0mm on the side. Check your own dessicant to make sure it is not smaller. To use smaller…
I couldn't get a new one at the hardware store, so I made one. Works very good and last now for several years. I think PETG would also work well, I used ABS because I wanted to try the material. Minimal support needed by rotating the tube…
RSEAT P1 SimRig / Sinuslive Bass Pump III Holder Note my other models for RSEAT P1! You will need the following per holder / speaker: 6 x M4 4x6 embedded screw nut 3 x M4 x 12mm screw for the speaker 3 x M4 x 16+ mm screw for Part A and…
The Antonov An-124 Ruslan is one of the largest cargo aircraft in the world. Developed by the Ukrainian company Antonov in the 1980s, it was designed to transport heavy and oversized cargo, including military equipment and large…
Introducing an outrageously uncomplicated 3D-printable universal tablet and e-book reader stand—it's like the yoga of iPad stands, embracing simplicity with Zen-like grace! Forget all the other stands out there; this one is the humble…
Reparaturteil eines gebrochenen Endanschlags für einen Garagentorantrieb. Funktioniert seit mehreren Jahren einwandfrei. Gedruckt in PETG und ABS.
Just a fan work and a realization of an old dream I had when I was a kid to build a big 'ol army of spacefaring space nuns from 40kya in the future. These sisters love battle, that's for sure! Seemed like most of the Adepta ladies you can…
Click the Rumbler or use it as a spinning top! Mix and match colors for a customized toy! The Rumbler has two versions: The Rumbler OG → Use a 12mm length of 4mm steel rod as the center pivot (recommended) The Rumbler Screw → Use an M4 x…
The secret to getting these to print well: Use the CLASSIC PERIMETER GENERATOR (In PrusaSlicer, it's under Print Settings -> Layers and Perimeters) Good cooling. Print at the lower temp range for your filament. In PrusaSlicer, go to…
Eheim Ein - Auslass Halterung für Eheim Außenfilter Ich hab es bei mir auf eine 3mm Scheibe aufgesetzt. Hab das Fluval Flex 34 Liter Give me a tip ! Category: Pets
Lechuza Wasserauslaufadapter auf einen Gartenschlauch (13mm). Getestet bei Lechuza TRIO Cottage und BALCONERA. Die erste Version muss mit Support gedruckt werden, kann jedoch mit der Hand problemlos reingeschraubt werden. Die zweite…
Remixed lens hood. Uses a screw thread generation library with much faster render performance. Adds a parameter for filter thread offset angle. Adds a parameter to generate a simple "blank" test fit part for determining the required…
Air vent grille for ventilation duct for 220mm x 54mm vent. Auslassgitter für Lüftungskanal für 220mm x 54mm Kanal
I can put big spool on your prusa. But you can't print big stuff with that What you will need : 4x bearings 608zz 4x screws M3 x 12mm or more 4x nuts M3
Feel the super satisfying clicks of the Rumbler in a new form factor! Simply put north facing 4mm x 2mm magnets in one part and south facing magnets in the other! Get ready to feel the oh-so-satisfying clicks of the Rumbler SLIDE!
Abdeckung, um den Rasierhobel auch mal im Kulturbeutel zu transportieren oder sicher im Regal zu lagern.
A boat outrigger compatible with Lego Technic parts. Ein Bootsausleger passend zu Legotechnikteilen
20 radius gauges from 1 to 20 mm, each with one convex radius (as a quarter circle at the top left) and two concave radii (as a quarter circle at the top right and a semicircle at the bottom). Comes with a matching box with lid. The…
MUSLE MAN - REGULAR SHOW - WALL ART
Hi there, I built a hardware monitor for the PC. So you always have your PC utilization in view. An ESP8266 is built into the display, which controls a Ws2812b Led Strip. in the appendix you will find the source code for the ESP as well…
3D analogues for the pieces of "Rise of Fenris" expansion for Scythe from Stonemaier games. Note for Tesla's Mechs I use the standard box that user Fringe made and I just lay the mechs down in the section dedicated for them instead of…
Beschreibung des 3D-gedruckten Milchauslauf-Ersatzteils: Deutsch: 1. Verwendungszweck: Dieses 3D-gedruckte Modell dient als Ersatz für den Milchauslauf eines Melitta CI Touch Kaffeevollautomaten. 2. Druckdetails: Es wurde entwickelt, um…
I came up with this design after taping spray cans to the blade on my Sawzall. I used PLA for the body and TPU for the strap. I didn't use any hardware but have holes.
Introducing the fiendishly clever, diabolically designed "Ant-mageddon 3000"! Born from the twisted mind of a genius who watched one too many ant processions. Picture this: a labyrinth, more tantalizing than an ant disco, leading to a…
Deutsch unten On long drives, I was always bothered by the wind blowing in my face from the vents. My eyes would get dry, and I wanted to turn the wind off, which wasn't possible. Every passenger I'd had to close the vents after a short…
Ich fand die Filamentauslässe nur im Deckel der Chitu-Box E1 lästig, Das Wechseln von Filament war unnötig kompliziert und Winkel und Position der Auslässen passten nicht zu meinem Setup. Deswegen habe ich zusätzliche Auslässe für das…
Dies ist eine einfache Stativbein-Halterung für einen Rollei-Kabelauslöser. Die Halterung wird einfach auf das Stativbein geklickt. Die Halterung wurde für einen Stativbeindurchmesser von 32mm entworfen.
Do you spend a lot of time talking about 3D Printing? Yes.... then this sign is for you. Design Concept This humorous decorative piece is designed to warn others in a playful way about your enthusiasm for 3D printing. The red background…
My Version of the Hygrometer Adapter for the 4l "Hexagon" Musli Box Lid. I was looking for a Hygrometer Adapter and printed out several different models. However, they were not as perfect as I had imagined. Either to loose in the lid, or…
Ich habe einen Auslöser für Einkaufwagen mit dem Namen meiner Firma Entworfen
This is designed to make a shelf in my kitchen closet which has a big hole in the bottom part I can attach each piece with safety and without bending from joints when printing in 10mm thickness or more. I used infill 20% and gyroid shaped…
Protect and mount your UniFi SuperLink Gateway with this sleek, functional, and easy-to-install enclosure. This case is designed specifically for a precision fit, ensuring your gateway stays cool while offering versatile mounting options.…
VW Multivan California Coast Ocean Lüftungsauslass für Standheizung unter dem Kühlschrank in zwei Varianten mit Mittelsitz und ohne Mittelsitz. Es handelt sich hierbei um zwei Prototypen. Feedback oder Weiterentwicklungen sind erwünscht.…
[DEU] Ich habe dieses Modell gemodelt damit es meinen Fernauslöser für die Kamera halten und ich somit coole Zeitraffer Videos erstellen kann. Aber damit es auch an der X-Achse des Prusa MK3/S befestigt werden kann benötigt ihr noch von…
I recently bought a 30-lb reel of filament from Protoparadigm. This is much cheaper than buying the stuff a kilogram at a time, but there is no practical way to hang that size reel off the side of my printer. Thus was born the…