Liczymy pasujące modele…
Does not require support material Print with back face (power cord plugin area) on the print bed
Wydruk około 3,60 €–4,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena jednego wariantu
Pick up any screw from the hardware store that fits the holes and goes deep enough into the desk. I found 3-4mm past the other side is enough for a tight and secure placement. Print on the side and use organic supports.
Wydruk około 5,49 €–6,71 € nettoWstępna wycena jednego wariantu
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
A vertical stand with a perfect fit for the Focusrite Scarlett Solo. Free some space on your desk !
I previously had a Scarlett 2i2 Gen 2 mounted under my desk with the mount from ziller88 . After the Interface died i bought a 2i2 Gen4 and modified the mount to work with the new interface. It comes in 4 Versions: Scarlett 2i2 Gen4 desk…
Under desk mount for the Focusrite Scarlett Solo 4th Gen. (note: 3rd gen and 4th gen are different sizes, 4th gen is bigger so this will not fit the 3rd gen) Designed to not require supports, to allow this it should be printed on one of…
This is an under desk bracket for the Scarlett Solo 3rd Gen. 4x #4 countersunk screws XLR cable clip is 6.5mm wide Print with support everywhere with back the side, where the cable clip is, down.
Je ne trouvais pas de supports pour les Focusrite Scarlett 2i2 3rd Gen donc j'en ai fait un car ce modèle est bien plus petit que ses prédécesseurs. Je me suis inspiré de ce support https://www.thingiverse.com/thing:3647280 pour faire…
Holder for mounting your Focusrite Scarlett Solo 3 under the Desk. The Solo 3 can be inserted after mounting the holders under the desk. Dimensions: Height: 45,5 mm Width: 24 mm Length: 57 mm Hole diameter: 3 mm Print instructions Layer…
The Focusrite Scarlett Solo/2i2 4th Generation seem to have no way to disable or dim their status LEDs. If the unit is in a bedroom and the computer is never shutdown, this presents a problem. This is just a basic cover to snap on when…
Designed an easy-to-print under-desk shelf mount for my Focusrite Scarlett Solo interface. I printed mine out of PLA and mounted it with 3M VHB tape. My particular desk has a 20mm square metal frame under the top shelf, so this hangs low…
This bracket has mounting holes compatible with the Balolo mounting grid, but of course you can also screw it to the underside of a desk. Easy to print, PLA is fine, no supports required.
This should help to align the PEI sheet with the printbed.
I thought my enclosure was wonky, i checked the cad to look where the location tabs for the bottom corners were supposed to go. I had to join the model properly to sort it out. I found an inconsistency and realised two parts were too…
You can use this model to mount you FOCUSRITE SCARLETT 2I2 under the table. Category: Music
Tray uses all available footprint of the box and has a space for tokens from the main game + same ammount of space for the addons. Also there is a space for one pack of 7 dices and sharpie. Small tray also fits into a box and contain all…
Focusrite Scarlett 2i2 - Vertical Stand.
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
I printed mine with Ender 3, 0.8mm nozzle, PETG Fusion model has inside dimensions as parameters so it can be easily modified. Rubber pad holes are not parametric though.
This is a edit of Ziller88's design. His file for 1st gen has the incorrect foot-groove size and would not work with 1st gen devices (Serial number's starting with S) If you don't know what generation your device is, see this link:…
the Scarlett Solo table attachment 3D print fits perfectly under any table, whether screwed or glued in my case(acrylic)
This is remixed from mirasderbissalin's desk mount to support a 1" desk and a 3rd Gen Focusrite Scarlet Solo. The desk fit is a little loose, has some space for a 3M command strip although it hasn't been needed. Print Settings Printer…
This is a Focusrite Scarlett 2i2 Mount for the Balolo setup cockpit
See “Differences” below for more information
Mount for Focusrite Scarlett 2i2
A under desk mount for a Scarlett Solo. Includes ports on the back for the USB c and the ¼in Ports.
Updated 7/29/2025 with variations Southern Railway style cab for HO scale steam locomotives. Based on the all welded style cabs that Coaster Shops made for western region locomotives. Details are based on a careful inspection of 1401's…
ITA: Tutti i file devono essere stampati due volte, tranne "MixerStand-3" che deve essere stampato in 4 copie. Per le parti laterali capovolgi il modello nello slicer in intrambi i lati e in modo da non aver bisogno di supporto. Consiglio…
Another pose here . Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to…
Desktop Stand for the Focusrite Scarlett Solo 4th Gen
My knobs became sticky as the plasitic started to break down. So I made a replacement for them. This is a replica Knob for Focusrite Scarlett 2i4 (First Gen). Might fit other Focusrite Hardware aswell. Feel free to leave a comment, if it…
Free up desk space by moving the chonky Clarett+ 4Pre under your desk 20% infill and some supports(that take a long time) should work in almost any material Category: Other The mount is tilted just over six degrees so plugs will clear…
The Focusrite Scarlett 2i2 4th Gen is a lovely USB audio interface with an iconic look! However, the red metallic chassis doesn't fit in with every aesthetic around it. In my case, I was building a digital piano setup, and the original…
Remix of the original model to support the different size and foot/input locations on the Gen 4 Scarlett Solo
Das ist meine Version von https://makerworld.com/en/models/189928#profileId-209577 Es ist ohne AMS oder MMU bzw CFS und ACE PRO druckbar. Ihr müsst den Druck jedoch pausieren um das Filament zu wechseln. Eine Pause kann im Slicer leicht…
This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…
Includes 3 patterns of enclosure and 1 base. Included 3 patterns because I am using mine on a wall mount and decided I wanted to be able to see the red part through. And Hexagons! Initially I tried another focusrite solo mount from…
2024/09/29: This is the first revision. There's a textless and text-ful version, and the text is embossed so that you can select it easily for multicolour. Lots of improvements to make- there's too much space between item cards, the text…
Prints with default Prusa slicer settings.
This bracket is designed to attach your Focusrite Scarlett Solo sound card under your desk, keeping it out of the way. It's best suited for desks about 1 inch thick.
A minimal angled desk stand for the Focusrite Scarlet 4i4 so the knobs are a little more accessible and visible. 15cm wide by 10cm deep Can be used for other Focusrite devices as well. Feedback is welcome! Updated Version 2 Uses far less…
Focusrite Scarlett Solo 3rd Gen cover for those who hate red color=)
Rack Ears for Focusrite Scarlett 18i20 4th Gen
Friction fit 10 inch rack mount for Focusrite Scarlett 8i6
Template to help with mounting Focusrite Scarlett 2i4 2nd Gen bracket
print two times on the flat side Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: Prusament PETG Category: Audio
Focusrite 4i4v4 under surface mount with screws. I left a little space for soft velcro to cushion it. If you don't use that, take about 1mm off the mounts. I included a pattern to drill holes with
I made this to install it under my desk. 0.2mm tolerance on every side, works great. 3mm diameter countersink holes, I used 4mm screws
This tool ensures that devices with built-in Europlugs (e.g. mosquito repellers, Dyson power supplies, compact adapters) sit straight and stable in Schuko wall sockets. No more tilted plugs! Simply attach the adapter to the device and…
La caja está diseñada para transportar la tarjeta de sonido Focusrite Scarlett 2i2, pero también es válida para la Scarlett solo, dentro cabe la tarjeta con su soporte y bolsa de tela. Está diseñada para poner la tarjeta en la parte…
I recommend printing this mount on its rear face, with the release tab facing upwards and some tree supports for the tab, as shown in the model photos. The mounting holes are sized for #6 screws.
No supports needed, printed in Pla with ender 3 printer.
Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament material: PLA Notes: Printed horizontally with supports
A vertical stand I made for my gen 4 Scarlett 2i2! Made to be stable while visually unobtrusive. :) Doesn't cover the XLR or USB ports on the back regardless of its orientation. You can add rubber feet under the base if you want to get…
Einer der Sprüche aus meiner umfangreichen Sammlung , die bei reger Nachfrage weiter wachsen wird. Prima geeignet für einen spaßigen Auftritt im Büro oder für ein Geschenk an eine Person bei passender Gelegenheit. Die Platte hat die Maße…
Remixed this Focusrite Scarlett 2i2 under desk mount so that it uses Multiconnect slots to mount instead of the screw holes. Printed with the same orientation as the original, and no supports needed. I printed this in PETG, which has…
Soporte para tarjeta de sonido Focusrite Scarlett 2i2
This is a replacement clip for Leifheit Hausrein cleaning bucket. It should be printed in petg as it can get into contact with hot water and is supposed to provide some flexibility to release the bucket.
I had my focusrite velcroed to the underside of my desk; but it kept falling off. So, I made this holder. It's designed to use the velcro-style removable double-sided adhesive mounting tape. Print instructions I printed mine in Prusament…
Top and bottom mount for Focusrite Scarlett Solo Gen 3.
The push button of my Focusrite Scarlett 18i20 MKI broke of. Only replacement parts for MKII were available so I created an MKI version. Not extremely elegant, but it works. Possible enhancements in the future: little more rounded top and…
I saw the thingyfab stand on thomann and I tried to remake it
Ideal for more permanant installations to reduce cable clutter. Designed with short right angle male to female connectors in mind. The version with_slot adds an additonal cable slot to route cables, e.g. keyboard/mouse usb under the unit.…
Under table mount for Focusrite Scatlett 2i2 (4th gen). Also for bigger versions as you can place brackets as you want to.
Desktop stand - 30-degree tilted version for Focusrite Scarlett Solo 3rd Gen. Second, Smaller version: https://www.printables.com/model/1794623-focusrite-scarlett-solo-3rd-gen-hellraiser-v2 Cutouts: For 2 large jacks and thick cables For…
Simple veritcal mount for Focusrite Scarlet solo 4th gen. sound card.
printed in PLA It took ~13h to print holder + screws on MK4, used the tree supports with front side facing down
Finding myself unable to get a new sealing from the dealership in time, I made my own sealing for the clutch actuation cylinder. Printed with TPU filament. My aim was a temporary solution to get the bike running, but it works perfectly…
If you have the oddly specific combo of a 4i4 interface and O2 amp, use this to mount them under your desk. The mount has end stops in the back so that the units stay put when plugging stuff in, and don't slide around. It also has a few…
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG Das Loch für den Zeigestab kann nach Belieben aufgebohrt werden, je nach dem welchen Stab man verwenden möchte. Anwendung: Das Tool mittig (siehe kleine Nase) am Fahrradlenker…
As a gift, I designed and printed an octopus ring holder.
https://www.thingiverse.com/thing:4556985 I liked thie design from DIY3DTech for my G8 and G7 lenses, but the allways it was lose and the laser wasn´t consistent with moving. Even with a foam pad it wasn´t as stable as i wished, so i…
Body: PLA, PETG Legs: TPU
Hier handelt es sich um eine Ausrichthilfe für die hansgrohe iBox universal. Das Modell habe ich mir selbst erstellt da ich noch Libellen für eine Wasserwaage da hatte… Abmessungen der Libelle Ø 9,5x34mm von der Bucht oder Ali Benötigt…
A custom made rack to fit the Focusrite Scarlett 4i4 4th gen. In combination with a charger, a usbc hub and a ethernet dongle. This makes all the port accsessable on the backside as XLR chassis connectors. Requires som soldering. Tried to…
A really simple conversion for ender5 pro with original motion system. Allows to equip it with Phaetus Rapido 2, Orbiter 2.5 and BTT Accelerometer. It is prepared for two 5015 cooling fans and one 4020 hotend fan. IMPORTANT note: There is…
Simple under desk mount for the Focusrite Scarlett 4i4 4th gen. Needed parts: either the ventilated or the unventilated main body the front plate 2x either the big or small screws Additional parts needed: 4 wood screws for attaching the…
Ein DND Statusring für den Zustand Nachteil.
WARNING This is a rough first design of a vertical desk mount for the Focusrite Saffire Pro 24 DSP audio interface. It's also meant to be screwed into the desk - if you decide afterwards to remove it the holes are left. If you remove…
Have you ever wanted to have your favorite filaments (up to 8) always on hand for manual multi-color printing or even for quick loading and protecting the filament from dust and dirt at the same time? Are you tired, like me, of rewinding…
This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…
This is a 1U rack mount for a Focusrite ScarlettSolo 3rd Gen audio interface along with a fan controller found on Amazon. You will need to take the rubber feet off the bottom of the audio interface for it to fit.
A under desk mount for my old Focusrite Scarlett 2i2 and my new FiiO K13 R2R. I realize that pretty much no one will have this exact combo, but since one of my viewers asked for it, I figured I just might upload it. Especially for those…
This model has been retired and only serves as a template for interested parties! MK2 → link Have you ever wanted to have your favorite filaments always on hand for manual multi-color printing or even for easy and quick loading? Are you…
Einstellhilfen zur Ausrichtung der X- und Y-Achsen. Damit lassen sich zum einen die Achsen wirklich senkrecht ausrichten, aber auch bsp. induktive Endschalter genau einstellen. Nutzt man mein “MPCNC PRIMO - Core adjustment tool for…
This is a custom-designed 3D-printable enclosure for USRP B210, consisting of two interlocking parts: top and bottom. The case is optimized for Bambu Lab A1 Mini, ensuring reliable printing with supports. Parts A and B slide into each…
Simple cover for the USB hole in the Prusa Mini enclosure. Funny thing; did not expect it to work with only one layer, but it holds :)
